Simultaneous determination of danshensu, hydroxysafflor yellow A, rosmarinic acid, lithospermic acid, salvianolic acid B in water extract of mixed salviae miltiorrhizae radix et rhizoma and carthami flos by HPLC / 中国中药杂志

<p><b>OBJECTIVE</b>To develop an HPLC method to determine the contents of danshensu, hydroxysafflor yellow A, rosmarinic acid, lithospermic acid, salvianolic acid B in the water extract of mixed Salviae Miltiorrhizae Radix et Rhizoma and Carthami Flos simultaneously.</p><p><b>METHOD</b>The separation were carried out at 30 degrees C on a ZORBAX Eclipse Plus C18 column (4.6 mm x 100 mm, 1.8 microm) with formic acid-500 mmol x L(-1) ammonium formate-water solution (0.5:10:90) as mobile phase A and acetonitrile-formic acid solution (100: 0.5) as mobile phase B in gradient mode at a flow rate of 0.5 mL x min(-1). Detection wavelengths were 280 nm for danshensu, rosmarinic acid, lithospermic acid, salvianolic acid B, and 380 nm for hydroxysafflor yellow A.</p><p><b>RESULT</b>The 5 components were separated well with a good linearity (R2 > 0.999 3) in the range of the test concentration. The average recoveries of danshensu, hydroxysafflor yellow A, rosmarinic acid, lithospermic acid, and salvianolic acid B were 99.1%, 102%, 102%, 98.5% and 101%, respectively.</p><p><b>CONCLUSION</b>This method is simple, accurate, and repeatable.</p>

Feedforward control strategy and its application in quality improvement of ethanol precipitation process of danhong injection / 中国中药杂志

In this work, a feedforward control strategy basing on the concept of quality by design was established for the manufacturing process of traditional Chinese medicine to reduce the impact of the quality variation of raw materials on drug. In the research, the ethanol precipitation process of Danhong injection was taken as an application case of the method established. Box-Behnken design of experiments was conducted. Mathematical models relating the attributes of the concentrate, the process parameters and the quality of the supernatants produced were established. Then an optimization model for calculating the best process parameters basing on the attributes of the concentrate was built. The quality of the supernatants produced by ethanol precipitation with optimized and non-optimized process parameters were compared. The results showed that using the feedforward control strategy for process parameters optimization can control the quality of the supernatants effectively. The feedforward control strategy proposed can enhance the batch-to-batch consistency of the supernatants produced by ethanol precipitation.

An approach to determine critical process parameters for ethanol precipitation process of danhong injection / 中国中药杂志

<p><b>OBJECTIVE</b>To establish a method integrating multi-targets for determining critical process parameters of the manufacturing process of traditional Chinese medicine.</p><p><b>METHOD</b>The ethanol precipitation process of Danhong injection was taken as an application case of the method established. Fractional factorial design of experiments were conducted. Mathematical models relating seven process parameters to ten targets in the ethanol precipitation process were established. Then the sums of the absolute values of the regression coefficients in the models were used to evaluate the criticality of process parameters.</p><p><b>RESULT</b>Water content in the concentrate, ethanol concentration and ethanol consumption were identified as the critical process parameters.</p><p><b>CONCLUSION</b>The method established can integrate multi-targets effectively for the evaluation of critical process parameters.</p>

Application of ultraviolet spectroscopy for rapid analysis in extraction process of danhong injection / 中国中药杂志

In this work, a rapid analysis method basing on ultraviolet spectroscopy was established for the determination of danshensu, protocatechuic aldehyde, rosmarinci acid, lithospermic acid and salvianolic acid B in the extraction process of Danhong injection. In the extraction process of Danshen and Honghua crude drugs, 44 extraction solution samples were collected and the contents of the five components were determined by HPLC analysis. The ultraviolet spectra of the samples were collected. Partial least square regression was used to establish the multivariate calibration models between the ultraviolet spectra and the contents of the five components. The results showed that the established models could predict the contents of the five components in the extraction solution accurately. The ultraviolet spectroscopy method established in this work can be used for rapid analysis of the intermediates of Danhong injection, which may be applied for the quality control in the manufacturing process.