Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 215
Filtrar
1.
Rev. argent. cardiol ; 91(1): 20-26, abr. 2023. graf
Artículo en Español | LILACS-Express | LILACS | ID: biblio-1529566

RESUMEN

RESUMEN Objetivo : Analizar si la estrategia del implante alto usando superposición de las cúspides derechas e izquierdas (Cusp Overlap, COVL) en el implante percutáneo de la válvula aórtica (TAVI) se relaciona con menor incidencia de regurgitación paravalvular (RPV) moderada o grave, comparada con la estrategia convencional (CON). Material y métodos : Se analizaron 206 pacientes consecutivos que recibieron TAVI con válvulas autoexpandidles entre agosto de 2019 y mayo de 2022. Se utilizó una estrategia CON en 101 pacientes (49%) y COVL en 105 (51%). El Punto Final Primario (PFP) fue la presencia de regurgitación paravalvular moderada y grave a 30 días. Resultados : No hubo diferencia clínica entre los grupos en cuanto a la edad media, sexo ni comorbilidades; excepto una tendencia a más diabetes y angioplastia coronaria previa en el grupo COVL. El STS score fue mayor en el grupo de COVL (6,9 ± 2,2 vs. 5,8 ± 2,4 en CON, p = 0,01). A 30 días no hubo diferencia en el PFP (RPV moderada en 2% en CON, y 0,9% en COVL; ninguno presentó RPV grave). Tampoco hubo diferencia en mortalidad, infarto, oclusión coronaria, accidente cerebrovascular, sangrado mayor y complicación vascular. La necesidad de marcapasos definitivo fue menor con la estrategia de COVL (6,7% vs. 17,8%, p = 0,01) y un nuevo bloqueo de rama izquierda ocurrió en 5,7% vs. 12,9% (p = 0,07). Conclusiones : En esta serie de un solo centro, la estrategia del implante alto de la válvula aórtica percutánea usando la técnica de COVL no demostró diferencia en la presencia de regurgitaciones moderadas o graves comparada con la estrategia convencional, sin presentar diferencia en las complicaciones, y se asoció a una menor necesidad de marcapasos definitivo y a una tendencia de menos bloqueos de rama izquierda a 30 días.


ABSTRACT Objective : The aim of this study is to whether higher transcatheter aortic valve implantation (TAVI) with self-expandable valves using the right and left cusp overlap strategy (Cusp Overlap, COVL) is associated with a lower incidence of moderate or severe paravalvular regurgitation, compared with the conventional strategy (CON). Methods : A total of 206 consecutive patients undergoing TAVI with self-expandable valves between August 2019 and May 2022 were analyzed. The CON technique was used in the first 101 patients (49%) and COVL was used in 105 (51%). The primary endpoint (PEP) was the presence of moderate or severe paravalvular regurgitation at 30 days. Results : There were no clinical differences between the groups in terms of mean age, sex or comorbidities, except for a trend towards more patients with diabetes and previous percutaneous coronary intervention in the COVL group. The STS score was greater in the COVL group (6.9 ± 2.2 vs. 5.8 ± 2.4 in the CON group; p = 0.01). There was no difference in the PEP at 30 days with 2% incidence of moderate PVR in the CON group and 0.9% in the COVL group, and none of them presented severe PVR. There were no differences in mortality, myocardial infarction, coronary artery obstruction, stroke, major bleeding or vascular complications. The need for permanent pacemaker was lower with the COVL strategy (6.7% vs. 17.8%, p = 0.01) and a new left bundle branch block occurred in 5.7% vs. 12.9% (p = 0.07). Conclusions : In this single-center series, the strategy of high transcatheter aortic valve implantation using the COVL strategy showed no difference in the presence of moderate or severe regurgitation compared with the conventional strategy, with no differences in complications, and was associated with a lower need for definitive pacemaker and with a trend towards lower incidence of left bundle branch block at 30 days.

2.
Rev. colomb. cir ; 38(2): 268-274, 20230303. fig, tab
Artículo en Español | LILACS | ID: biblio-1425199

RESUMEN

Introducción. La estenosis colorrectal benigna hace referencia a una condición anatómica caracterizada por una disminución del diámetro de la luz intestinal distal a la válvula ileocecal, ocasionando una serie de signos y síntomas de tipo obstructivo. Es una entidad poco frecuente, secundaria en la gran mayoría de veces a la realización de anastomosis intestinales al nivel descrito. El objetivo de esta investigación fue determinar la utilidad del stentcolónico en estenosis secundaria a patología colorrectal no neoplásica. Métodos. Estudio descriptivo de una cohorte de pacientes que desarrolló estenosis colorrectal de origen benigna confirmada por colonoscopía, en 3 hospitales de alta complejidad de la ciudad de Medellín, Colombia, entre los años 2007 y 2021. Resultados. Se incluyeron 34 pacientes con diagnóstico de estenosis colorrectal de origen benigno, manejados con stents metálicos autoexpandibles. La mediana de seguimiento fue de 19 meses y se obtuvo éxito clínico en el 73,5 % de los casos. La tasa de complicación fue del 41,2 %, dada principalmente por reobstrucción y migración del stent, y en menor medida por perforación secundaria a la colocación del dispositivo. Conclusión. Los stents metálicos autoexpandibles representan una opción terapéutica en pacientes con obstrucción colorrectal, con altas tasas de mejoría clínica en pacientes con patología estenosante no maligna. Cuando la derivación por medio de estoma no es una opción, este tipo de dispositivos están asociados a altas tasas de éxito clínico y mejoría de la calidad de vida de los pacientes


Introduction. Benign colorectal stenosis refers to an anatomical condition characterized by a decrease in the diameter of the intestinal lumen distal to the ileocecal valve, which might cause a series of obstructive signs and symptoms. It is a rare entity, caused in the vast majority of cases due to intestinal anastomosis at the described level. The purpose of this study is to determine the performance of colonic stents in the management of non-malignant colorectal strictures. Methods. Descriptive study of a cohort of patients who developed a benign colorectal stenosis confirmed by colonoscopy in three high-complexity hospitals in the city of Medellín, Colombia, between 2007 and 2021. Results. Thirty-four patients diagnosed with benign colorectal stenosis managed with self-expanding metal stents were included in the study. Median follow-up was 19 months, obtaining clinical success in 73.5% of cases, with a complication rate of 41.2%, mainly due to reobstruction and migration of the stent, and to a lesser extent due to perforation secondary to device placement.Conclusion. Self-expanding metallic stents represent a therapeutic option in patients with colorectal obstruction caused by non-malignant stenosing pathology. When diversion through a stoma is not an option, this type of device is associated with high rates of clinical success and improvement in the patients' quality of life


Asunto(s)
Humanos , Enfermedades del Recto , Anastomosis Quirúrgica , Stents Metálicos Autoexpandibles , Recto , Colon , Constricción Patológica
3.
Chinese Journal of Medical Instrumentation ; (6): 312-316, 2023.
Artículo en Chino | WPRIM | ID: wpr-982235

RESUMEN

This study briefly introduces the revised content of Guidance for Registration of Metallic Bone Plate Internal Fixation System (Revised in 2021) compared to the original guidance, mainly including the principles of dividing registration unit, main performance indicators of standard specification, physical and mechanical performance research, and clinical evaluation. At the same time, in order to provide some references for the registration of metallic bone plate internal fixation system, this study analyzes the main concerns in the review process of these products based on the accumulation of experience combining with the current review requirements.


Asunto(s)
Placas Óseas , Fijación Interna de Fracturas , Fenómenos Biomecánicos
4.
Chinese Journal of Biotechnology ; (12): 1462-1476, 2023.
Artículo en Chino | WPRIM | ID: wpr-981148

RESUMEN

Antibiotics are playing an increasingly important role in clinical antibacterial applications. However, their abuse has also brought toxic and side effects, drug-resistant pathogens, decreased immunity and other problems. New antibacterial schemes in clinic are urgently needed. In recent years, nano-metals and their oxides have attracted wide attention due to their broad-spectrum antibacterial activity. Nano-silver, nano-copper, nano-zinc and their oxides are gradually applied in biomedical field. In this study, the classification and basic properties of nano-metallic materials such as conductivity, superplasticity, catalysis, and antibacterial activities were firstly introduced. Secondly, the common preparation techniques, including physical, chemical and biological methods, were summarized. Subsequently, four main antibacterial mechanisms, such as cell membrane, oxidative stress, DNA destruction and cell respiration reduction, were summarized. Finally, the effect of size, shape, concentration and surface chemical characteristics of nano-metals and their oxides on antibacterial effectiveness and the research status of biological safety such as cytotoxicity, genotoxicity and reproductive toxicity were reviewed. At present, although nano-metals and their oxides have been applied in medical antibacterial, cancer treatment and other clinical fields, some issues such as the development of green preparation technology, the understanding of antibacterial mechanism, the improvement of biosafety, and the expansion of application fields, require further exploration.


Asunto(s)
Óxidos/química , Nanopartículas del Metal/química , Antibacterianos/química , Zinc , Cobre
5.
Artículo | IMSEAR | ID: sea-218428

RESUMEN

Trauma involving the eye, orbital and periorbital regions are commonly seen in cases of road traffic accidents, sports injuries and physical assaults, but cases of intraorbital / periorbital foreign bodies are rare. Early presentation, history of trauma, and imaging help in diagnosis. However, sometimes the diagnosis is missed, particularly in cases with late presentation and a vague history of minor trauma and trauma with a non-metallic foreign body. A missed foreign body may present later with infection, repeated inflammation, ptosis, and proptosis and motility defect, further complicating the management.Here, we present a case of missed foreign body during the primary repair of facial injury in a 32-year male with polytrauma sustained in a road traffic accident. Evidence of foreign body was reported in a CT scan head advised for head injury. Re-exploration of wound and removal of foreign body is performed under local anaesthesia.

6.
Rev. argent. cardiol ; 90(2): 112-119, abr. 2022. tab, graf
Artículo en Español | LILACS-Express | LILACS | ID: biblio-1407125

RESUMEN

RESUMEN Objetivo: Analizar si el implante más alto en el implante percutáneo de válvula aórtica (TAVI) con válvulas auto-expandibles utilizando la superposición de las cúspides derecha e izquierda disminuye la necesidad de marcapasos definitivo. Material y Métodos: Se analizaron 164 pacientes consecutivos que recibieron TAVI con válvulas auto- expandibles; en 101(61,6%) de ellos se implantaron utilizando la vista coplanar de las tres cúspides, a la cual llamamos técnica convencional (CON) y en 63 (38,4%) utilizamos la técnica COVL, con superposición de las cúspides derecha e izquierda . El punto final primario (PFP) fue la necesidad de marcapasos definitivo (MCPD) a 30 días. Resultado: No hubo diferencias entre los grupos en la edad media, prevalencia de sexo masculino, hipertensión, cirugía de revascularización previa, antecedente de accidente cerebrovascular (ACV), función renal, o hemodiálisis. Los pacientes en el grupo COVL tuvieron más diabetes, angioplastia coronaria (ATC) e infarto previos. La ATC pre-TAVI fue similar, con mayor score STS (6,3 ± 2,1 vs. 5,8 ± 2,4; p = 0,05). La presencia de fibrilación auricular fue mayor en el grupo COVL sin diferencia en bloqueo auriculoventricular, de rama derecha o izquierda. No hubo diferencia en el área valvular aórtica, gradiente medio y fracción de eyección ventricular izquierda. A 30 días se observó una reducción significativa del PFP en la estrategia COVL, (6,3% vs 17,8%, p = 0,03). No hubo diferencia en mortalidad, ACV, sangrado mayor, infarto agudo de miocardio o regurgitación aórtica. Hubo tendencia a menor presencia de nuevo bloqueo competo de rama izquierda en el grupo COVL (4,8% vs. 12,9%, p = 0,08). Conclusiones: El uso de la técnica de COVL, que permite un implante más alto en el TAVI con válvulas autoexpandibles, demostró en esta serie ser factible y seguro, con disminución de la necesidad de MCPD sin aumento de las complicaciones.


ABSTRACT Objective: The aim of this study was to analyze whether higher transcatheter aortic valve implantation with self-expandable valves using the right and left cusp overlap strategy decreases the need for permanent pacemaker. Methods: A total of 164 consecutive patients undergoing TAVI with self-expandable valves were analyzed: 101 (61.6%) implanted with the conventional technique (CON) using the three-cusp coplanar view, and 63 (38.4%) using the right and left cusp overlap (COVL) technique. The primary endpoint (PEP) was the need for permanent pacemaker (PPM) at 30 days. Results: Mean age, prevalence of male gender, hypertension, prior coronary artery bypass graft surgery (CABG), and history of stroke, kidney function or hemodialysis was not different between groups. Patients in the COVL group had more diabetes, coronary percutaneous transluminal coronary angioplasty (PTCA) and prior infarct, and pre-TAVI PTCA was similar, with higher STS score (6.3±2.2 vs. 5.8±2.4; p=0.05). The presence of atrial fibrillation was greater in the COVL group, without differences in right or left bundle branch or atrioventricular block. There was no difference in aortic valve area, mean gradient and left ventricular ejection fraction. At 30 days, the need of PPM was significantly reduced with the COVL technique (6.3%% vs. 17.8%; p=0.03). No difference was observed in mortality, stroke, major bleeding, acute myocardial infarction or aortic regurgitation, and the presence of new-onset complete left bundle branch block was lower in the COVL group (4.8% vs. 12.9%; p=0.08). Conclusions: Use of the COVL technique, which allows higher self-expandable valve implantation during TAVI, was feasible and safe, decreasing the need for PPM without increasing complications.

7.
International Journal of Biomedical Engineering ; (6): 256-262, 2022.
Artículo en Chino | WPRIM | ID: wpr-989255

RESUMEN

Ureteral stents play an important role in the treatment of ureteral strictures. It supports the narrow urethra and ensures the smooth flow of urine, thus alleviating the impact of ureteral stricture on kidney function. Traditional ureteral stents are prone to complications such as stones, bacterial infections, inflammation, and restenosis when indwelling in the body. This paper reviews the performance requirements of ureteral stents, introduces ureteral stents of different structures, functions, materials, and preparation as well as processing techniques, and analyzes the key problems and future research directions of ureteral stents, which provides a reference basis for the research of ideal ureteral stents.

8.
Organ Transplantation ; (6): 597-2022.
Artículo en Chino | WPRIM | ID: wpr-941480

RESUMEN

Objective To evaluate the clinical efficacy of endoscopic retrograde cholangiopancreatography (ERCP)-based comprehensive minimally invasive treatment for biliary anastomotic stenosis (BAS) after liver transplantation. Methods Clinical data of 60 BAS recipients after liver transplantation were retrospectively analyzed, 54 male and 6 female, aged (48±10) years. ERCP was initially carried out. If it succeeded, plastic or metallic stents were placed into the biliary tract. If it failed, percutaneous transhepatic cholangial drainage (PTCD) or single-operator cholangioscopy (SpyGlass) was adopted to pass through the stenosis. If all these procedures failed, magnetic anastomosis or other special methods were delivered. The incidence and treatment of BAS after liver transplantation were summarized. The efficacy, stent removal and recurrence were observed. Results The median time of incidence of BAS after liver transplantation was 8 (4, 13) months. Within postoperative 1 year, 1-2 years and over 2 years, 39, 16 and 5 recipients were diagnosed with BAS, respectively. All 60 BAS recipients after liver transplantation were successfully treated, including 56 cases initially receiving ERCP, and 41 completing BAS treatment, with a success rate of 73%. The failure of guide wire was the main cause of ERCP failure. The success rates of PTCD, SpyGlass and magnetic anastomosis were 5/9, 5/7 and 7/8, respectively. Two recipients were successfully treated by percutaneous choledochoscope-assisted blunt guide wire technique and stent placement in the biliary and duodenal fistula. After 3 (3, 4) cycles of ERCP and 13 (8, 18) months of stent indwelling, 38 recipients reached the stent removal criteria, including 25 plastic stents and 13 metallic stents. The indwelling time of plastic stents was longer than that of metallic stents (P < 0.05). Six cases suffered from stenosis recurrence at 12 (8, 33) months after stent removal, and the recurrence rate was 16%. Six patients were treated with ERCP, and 5 of them did not recur after the stents were successfully removed. Multivariate analysis showed that delayed diagnosis of stenosis and frequent ERCP before stent removal were the independent risk factors for BAS recurrence (both P < 0.05). Conclusions ERCP-based comprehensive minimally invasive treatment may improve the success rate of BAS treatment after liver transplantation and yield satisfactory long-term efficacy. Delayed diagnosis of BAS and high frequent ERCP required for stent removal are the independent risk factors for BAS recurrence.

9.
Acta amaz ; 51(3): 260-269, set 2021. graf, tab, ilus
Artículo en Inglés | LILACS, VETINDEX | ID: biblio-1455404

RESUMEN

Cutaneous leishmaniasis is a disease caused by protozoa of the genus Leishmania and, currently, the treatment of first choice is meglumine antimoniate. However, due to its limited effectiveness and high toxicity, it is necessary to seek new active principles for leishmaniasis treatment. Metal complexes are gaining importance due to their effectiveness and low toxicity. In this context, the present study aimed to evaluate the in vitro and in vivo antileishmanial activity of the hypotoxic copper(I) complex [HB(pz)3]Cu(PCN). Four dermotropic species of Leishmania were tested with the metal complex and its effectiveness was determined through parasitic viability and infectivity rate, and cytotoxicity was determined using a redox dye (resazurin). For the in vivo tests, hamsters were infected and the lesions treated with a formulated ointment containing the complex, the effectiveness of which was assessed by measuring the diameter of the inoculum/snout location and determining the parasitic load. The results demonstrated moderate toxicity in murine macrophages and human monocytes and better efficacy in Leishmania (V.) braziliensis when compared to the other species tested, with a 50% reduction in the viability of promastigote and amastigote forms (in vitro). General data from daily topical treatment for up to 30 days showed low efficacy for reducing lesions, and no clinical and parasitological cure was observed in the experimental animals. Thus, the [HB(pz)3]Cu(PCN) complex proved to be promising in in vitro studies against L. (V.) braziliensis, and should be further tested in new formulations and new experimental treatment schemes.


A leishmaniose cutânea é uma doença causada por protozoários do gênero Leishmania e, atualmente, o tratamento de primeira escolha é o antimoniato de meglumina. Porém, devido à sua eficácia limitada e alta toxicidade, é necessário buscar novos princípios ativos para o tratamento da leishmaniose. Os complexos metálicos vêm ganhando importância devido à sua eficácia e baixa toxicidade. Nesse contexto, o presente estudo teve como objetivo avaliar a atividade leishmanicida in vitro e in vivo do complexo hipotóxico de cobre(I) [HB(pz)3]Cu(PCN). Quatro espécies dermotrópicas de Leishmania foram testadas com o complexo metálico e sua eficácia foi determinada através da viabilidade parasitária e taxa de infectividade, e a citotoxicidade foi determinada com um corante redox (resazurina). Para os testes in vivo, hamsters foram infectados e as lesões foram tratadas com uma pomada formulada contendo o complexo. A eficácia foi avaliada medindo o diâmetro do inóculo/focinho e determinando a carga parasitária. Os resultados demonstraram toxicidade moderada em macrófagos murinos e monócitos humanos e melhor eficácia em Leishmania (V.) braziliensis quando comparada às demais espécies testadas, com redução de 50% na viabilidade das formas promastigotas e amastigotas (in vitro). Os dados gerais do tratamento tópico diário por até 30 dias mostraram baixa eficácia na redução das lesões, e nenhuma cura clínica e parasitológica foi observada nos animais experimentais. Portanto, o complexo [HB(pz)3]Cu(PCN) mostrou-se promissor em estudos in vitro contra L. (V.) braziliensis, devendo ser empregado em novas formulações e novos esquemas de tratamento experimental.


Asunto(s)
Cobre/análisis , Leishmaniasis , Técnicas In Vitro
10.
Medisan ; 25(4)2021. ilus
Artículo en Español | LILACS, CUMED | ID: biblio-1340214

RESUMEN

Se describe el caso clínico de un paciente de 36 años de edad, quien acudió a la consulta de Ortopedia y Traumatología del Hospital General Docente Dr. Juan Bruno Zayas Alfonso de Santiago de Cuba, con un alambrón oxidado, encarnado en la cara palmar de la muñeca derecha, con parestesias en la zona de inervación del nervio mediano. La radiografía reveló que dentro de las estructuras de la muñeca había 10 cm del alambrón, con la porción distal doblada en forma de gancho, por lo cual se le realizó intervención quirúrgica de urgencia. Se utilizó anestesia regional, sedación e isquemia y se extrajo el cuerpo extraño en sentido contrario a la curvatura que presentaba. Luego de pasar el efecto anestésico persistían las parestesias en el pulpejo del índice, que desaparecieron completamente a los 4 meses del accidente. Se incorporó a sus labores habituales a los 2 meses de operado.


The case report of a 36 years patient is described. He went to the Orthopedics and Traumatology Service of Dr. Juan Bruno Zayas Alfonso Teaching General Hospital in Santiago de Cuba, with a rusty big wire, ingrowing in the right wrist palmar face, with paresthesias in the innervation area of the median nerve. The x-ray revealed that inside the wrist structures there was 10 cm of the big wire, with the distal portion bent in hook form, reason why an emergency surgical intervention was carried out. Regional anesthesia, sedation and ischemia were used and the strange body was removed in sense contrary to the bend that presented. After the anesthetic effect eased the paresthesias of the index finger tip persisted that disappeared completely 4 months after the accident. He went back to his usual works 2 months after the operation.


Asunto(s)
Parestesia/terapia , Cuerpos Extraños , Nervio Mediano/lesiones , Accidentes de Trabajo , Nervio Mediano/cirugía
11.
CorSalud ; 13(1): 95-99, 2021. graf
Artículo en Español | LILACS | ID: biblio-1345925

RESUMEN

RESUMEN El tratamiento de las enfermedades de la aorta torácica con la implantación percutánea de stent se viene realizando desde su aplicación, por primera vez, a principios del siglo XX. Se presenta un paciente de 79 años de edad que fue llevado a urgencias con intenso dolor de espalda posterior a un accidente automovilístico, a quien se le realizó tomografía computarizada y se le diagnosticó una disección aórtica tipo III de DeBakey. Se le implantó un stent endovascular autoexpandible de nitinol (Talent Stent Graft, Medtronic) en la aorta descendente, donde comenzaba el segmento disecado. Este procedimiento es un método eficaz para prevenir la isquemia de órganos y la ruptura vascular en las enfermedades traumáticas de la aorta. Es menos invasivo, tiene menos complicaciones que el tratamiento quirúrgico, y es efectivo para restituir el flujo sanguíneo de forma rápida y segura.


ABSTRACT The applications of thoracic aorta pathologies with a stent graft percutaneously have been performed for the first time since the beginning of the 20th century. Computed tomography was performed on a 79-year-old patient who was brought to the emergency room due to an in-vehicle traffic accident with severe back pain, and DeBakey type III aortic dissection was determined. An endovascular self-expanding nitinol stent (Talent Stent Graft, Medtronic) was implanted in the descending aorta where the dissected segment begins. Stent graft implantation is an effective method in preventing organ ischemia and rupture in traumatic aortic pathologies. This procedure is less invasive and has less complication than surgical approach. It is effective in providing blood flow quickly and safely.


Asunto(s)
Diagnóstico por Imagen , Stents Metálicos Autoexpandibles , Disección Aórtica
12.
Chinese Journal of Biotechnology ; (12): 541-560, 2021.
Artículo en Chino | WPRIM | ID: wpr-878581

RESUMEN

Nano-metallic materials are playing an important role in the application of medicine, catalysis, antibacterial and anti-toxin due to their obvious advantages, including nanocrystalline strengthening effect, high photo-absorptivity, high surface energy and single magnetic region performance. In recent years, with the increasing consumption of global petrochemical resources and the aggravation of environmental pollution, nanomaterials based on bio-based molecules have aroused great concern. Bio-based molecules refer to small molecules and macromolecules directly or indirectly derived from biomass. They usually have good biocompatibility, low toxicity, degradability, wide source and low price. Besides, most bio-based molecules have unique physical, chemical properties and physiological activity, such as optical activity, acid/alkali amphoteric property, hydrophilic property and easy coordination with metal ions. Thus, the corresponding nano-materials based on bio-based molecules also have unique functions, such as anti-inflammatory, anti-cancer, anti-oxidation, antiviral fall blood sugar and blood fat etc. In this paper, we give a comprehensive overview of the preparation and application of nano-metallic materials based on bio-based molecules in recent years.


Asunto(s)
Antiinfecciosos , Catálisis , Metales , Nanoestructuras
13.
China Journal of Chinese Materia Medica ; (24): 2142-2148, 2021.
Artículo en Chino | WPRIM | ID: wpr-879171

RESUMEN

Metallomics is a frontier interdisciplinary subject at its vigorous development stage. Its goal is to systematically study the content, distribution, chemical species, structural characteristics and functions of metal elements in biological system. It is also a comprehensive discipline to study the existing state and function of free or complex metal elements in life. Metallomics is an ideal tool to study the biological behavior of inorganic elements, which can be used to solve many problems in the research of mineral Chinese medicine(MCM). It provides a strong theoretical basis and technical support for the research of MCM. Its theory and methods provide re-ference and enlightenment for the in-depth study of MCM, and also provide new ideas and open up new ways for the research of MCM. The application of metallomics theory and methods in the research of MCM is of great significance to reveal the material basis and mec-hanism of MCM, promote the process of basic research on MCM, fully exploit and utilize medicinal mineral resources and carry forward the traditional MCM treasure in China. In this paper, we introduced the concept, academic development, research content and research methods of metallomics, and discussed the application prospects of metallomics in the analysis of inorganic element composition characteristics and quality control, material basis and mechanism of MCM, so as to provide reference for further researches on MCM.


Asunto(s)
China , Medicamentos Herbarios Chinos , Medicina Tradicional China , Minerales , Control de Calidad
14.
Arq. gastroenterol ; 57(4): 347-353, Oct.-Dec. 2020. tab, graf
Artículo en Inglés | LILACS | ID: biblio-1142344

RESUMEN

ABSTRACT BACKGROUND Biliary complications remain one of the most important causes of morbidity and graft loss after liver transplant (LT). Endoscopic therapy of biliary complications has proven to be effective over time, leaving surgical treatment restricted to only very few cases. However, we cannot yet predict which patients will have the greatest potential to benefit from endoscopic treatment. OBJECTIVE On this premise we decide to conduct this study to evaluate the role and safety of single operator cholangioscopy (SOC) in the endoscopic treatment of post-LT biliary anastomotic strictures (AS). METHODS: Between March/2016 and June/2017, 20 consecutive patients referred for endoscopic treatment for biliary anastomotic stricture were included in this prospective observational cohort study. Inclusion criteria were age over 18 years old, and a deceased LT performed within at least 30 days. Exclusion criteria were non-anastomotic biliary stricture, biliary leakage, cast syndrome, any previous endoscopic therapy, pregnancy and inability to provide informed consent. All patients underwent SOC before endoscopic therapy with fully covered self-expandable metal stent (FCSEMS) and after stent removal. RESULTS: At pre-treatment SOC, stricture orifice and fibrotic changes could be visualized in all patients, vascular changes and surgical sutures in 60% and acute inflammatory changes in 30%. SOC was essential for guidewire placement in five cases. FCSEMS was successfully deployed in all patients. Stricture resolution rate was 44.4% (median stent indwelling 372 days). Stricture recurrence was 12.5% (median follow-up of 543 days). Adverse events were distal (66.6%) and proximal (5.5%) stent migration, stent occlusion (16.6%), severe abdominal pain (10%) and mild acute pancreatitis (10%). SOC was repeated after FCSEMS removal. Post-treatment SOC showed fibrotic changes in all but one patient; vascular and acute inflammatory changes were less frequent in comparison to index procedure. The disappearance of suture material was remarkable. None of the cholangioscopic findings were statistically correlated to treatment outcome or stricture recurrence. CONCLUSION: Endoscopic retrograde cholangiography with SOC is feasible in post-LT patients with AS. Cholangioscopic findings can be classified into fibrotic, vascular and acute inflammatory changes. Cholangioscopy may be helpful to assist guidewire passage, but Its overall role for changing management is post-LT patients was not demonstrated.


RESUMO CONTEXTO: As complicações biliares continuam sendo uma das principais causas de morbidade e perda do enxerto após o transplante hepático. O tratamento endoscópico das complicações biliares provou ser eficaz ao longo do tempo, deixando o tratamento cirúrgico restrito a casos de exceção. No entanto, ainda não podemos prever quais pacientes terão maior potencial de se beneficiar da terapia endoscópica. OBJETIVO: Nesta premissa, decidimos realizar este estudo para avaliar o papel e a segurança da colangioscopia peroral de operador único (CPO) no tratamento endoscópico das estenoses anastomóticas biliares (EA) pós-transplante hepático. MÉTODOS: Entre março de 2016 e junho de 2017, 20 pacientes consecutivos encaminhados para tratamento endoscópico da EA biliar foram incluídos neste estudo prospectivo de coorte observacional. Os critérios de inclusão foram idade superior a 18 anos e um transplante hepático de doador falecido realizado há pelo menos 30 dias. Pacientes com estenose biliar não anastomótica, fístula biliar, "cast" síndrome, qualquer terapia endoscópica prévia, gravidez e incapacidade de fornecer consentimento informado foram excluídos. Todos os pacientes foram submetidos à CPO antes da terapia endoscópica com prótese metálica autoexpansível totalmente coberta (PMAEC) e após a sua remoção. RESULTADOS: Na CPO realizada antes do tratamento endoscópico, o orifício de estenose e alterações fibróticas foram visualizadas em todos os pacientes, alterações vasculares e a presença de suturas cirúrgicas em 60%, enquanto alterações inflamatórias agudas em 30%. A CPO foi determinante para a transposição do fio-guia através da estenose em cinco casos. Uma PMAEC foi implantada com sucesso em todos os pacientes. A taxa de resolução da estenose foi de 44,4% (tempo médio de permanência de 372 dias). A recorrência da EA foi de 12,5% (acompanhamento médio de 543 dias). Os eventos adversos foram migração distal (66,6%) e proximal (5,5%) da prótese metálica, oclusão da PMAEC (16,6%), dor abdominal intensa (10%) e pancreatite aguda leve (10%). A CPO foi repetida após a remoção da PMAEC. A colangioscopia realizada após o tratamento endoscópico mostrou alterações fibróticas em todos, exceto em um paciente; alterações vasculares e inflamatórias agudas foram menos frequentes em comparação à CPO inicial. O desaparecimento do material de sutura, observado em todos os casos, foi notável. Nenhum dos achados colangioscópicos foram estatisticamente correlacionados ao resultado do tratamento ou à recorrência de estenose. CONCLUSÃO: A colangioscopia peroral é viável nos pacientes pós-transplante hepático com estenose biliar anastomótica. Os achados colangioscópicos podem ser classificados em alterações inflamatórias agudas, fibróticas e vasculares. A colangioscopia pode ser útil para auxiliar na passagem do fio-guia, mas seu papel geral na mudança de tratamento nos pacientes pós-transplante hepático não foi demonstrado.


Asunto(s)
Humanos , Adolescente , Adulto , Conductos Biliares/cirugía , Conductos Biliares/patología , Colestasis/cirugía , Colangiopancreatografia Retrógrada Endoscópica/métodos , Trasplante de Hígado/efectos adversos , Pancreatitis , Enfermedad Aguda , Estudios Prospectivos , Estudios de Cohortes , Resultado del Tratamiento , Constricción Patológica , Donadores Vivos
15.
J Cancer Res Ther ; 2020 Sep; 16(5): 1119-1124
Artículo | IMSEAR | ID: sea-213765

RESUMEN

Objective: We sought to analyze the efficacy and safety of preserving the Oddis sphincter during metallic biliary stent implantation in patients with malignant obstructive jaundice. Materials and Methods: In a retrospective analysis, 133 patients with malignant obstructive jaundice who were admitted to our hospital from January 2010 to January 2017 and who underwent metallic biliary stent implantation were divided into two groups – the Oddis sphincter retention group (n = 55) and the Oddis sphincter nonretention group (n = 78) – according to whether the Oddis sphincter was left untouched during stent placement. The patient clinical data as well as information on complications, time of stent patency, improvement in liver function, and decline of serum bilirubin were reviewed and evaluated. Statistical analysis was performed using the Statistical Package for the Social Sciences version 19.0 (IBM Corp., Armonk, NY, USA, USA) and Prism version 7 (GraphPad Software, San Diego, CA, USA). Results: The median follow-up time was 9.6 months (range: 1–20 months) and there was no significant difference in general clinical information between the two groups. However, the incidence rates of acute biliary infection, recurrent biliary infection, acute pancreatitis, chronic pancreatitis, and asymptomatic pancreatic enzyme levels were higher in the Oddis sphincter retention group and the differences were all statistically significant (P < 0.05). Conversely, there were no significant differences in bilirubin decline, liver function improvement, and stent patency between the two groups (P > 0.05). Conclusion: Leaving the Oddis sphincter untouched during biliary stent placement can reduce the incidence of postoperative complications, while there was no effect on stent patency or jaundice relief. Therefore, it is recommended to preserve the Oddis sphincter when the stenosis is more than 3 cm above the duodenal papilla

16.
J Cancer Res Ther ; 2020 Sep; 16(4): 878-883
Artículo | IMSEAR | ID: sea-213719

RESUMEN

Aim of Study: The goal of this research was to investigate if application of optimized imaging parameters, recommended in literature, would be effective in producing the image quality required for treatment planning of spinal radiation fields with metallic implants. Materials and Methods: CT images from an anthropomorphic torso phantom with and without spinal implants were acquired using different imaging protocols: raising kVp and mAs, reducing the pitch and applying an extended CT scale (ECTS) technique. Profiles of CT number (CT#) were produced using DICOM data of each image. The effect of artifact on dose calculation accuracy was investigated using the image data in the absence of implant as a reference and the recommended electron density tolerance levels (Δρe). Results: Raising the kVp was the only method that produced improvement to some degree in CT# in artifact regions. Application of ECTS improved CT# values only for metal. Conclusions: Although raising the kVp was effective in reducing metallic artifact, the significance of this effect on Δρe values in corrected images depends on the required tolerance for treatment planning dose calculation accuracy. ECTS method was only successful in correcting the CT number range in the metal. Although, application of ECTS method did not have any effect on artifact regions, its use is necessary in order to improve delineation of metal and accuracy of attenuation calculations in metal, provided that the treatment planning system can use an extended CT# calibration curve. Also, for Monte Carlo calculations using patient's images, ECTS-post-processed-CT images improve dose calculation accuracy for impure metals

17.
Rev. Fac. Odontol. Univ. Antioq ; 32(1): 26-35, June 2020. tab, graf
Artículo en Inglés | LILACS | ID: biblio-1149598

RESUMEN

Abstract Introduction: one of the main factors for discomfort in users of removable partial prosthesis is the presence of visible retainers in the anterior zone. In Kennedy Class III arches, that is, exclusively dental loading pathways (in which the functional forces reach their final receptor: the alveolar bone), anterior zone retainers may be eliminated by selecting an appropriate prosthetic insertion and removal axis, and mainly by carving guiding planes that should provide retention by mechanical rubbing. This in vitro experimental study aimed to prove the hypothesis that it is possible to obtain functional retention in a dental-loading pathway removable partial prosthesis without using retainers in the anterior zone. Methods: 7 maxillary models with different types of toothless process were used. As a common characteristic, they all were classified as Kennedy Class III with partial denture arches. A Cr-Co metallic base was built for each model according to their clinical situation. Their design allowed them to be exposed to traction in a universal traction machine (Tinius Olsen H5K-S). Results: the proposed hypothesis was confirmed as expected. The traction force needed to displace the metallic bases with retainers in the anterior zone was 16.93 Newton in average. On the other hand, the metallic bases without retainers in the anterior zone showed an average of 12.84 N. The average values obtained for both groups are higher than those reported in the literature (4.903 N). Conclusions: in Class III removable partial dentures it is possible to use metallic bases with no retainers in the anterior zone.


Resumen Introducción: un factor que incomoda a los usuarios de prótesis parciales removibles es la presencia de retenedores visibles en la zona anterior. En clases III de Kennedy, es decir, vías de carga exclusivamente dentarias, sería posible eliminar los retenedores del sector anterior mediante un adecuado tallado de planos guías que brinde retención por roce mecánico y la elección de un eje de inserción y remoción protésico. Este trabajo es un diseño experimental in vitro que tiene por finalidad validar la hipótesis propuesta por nuestro equipo de investigación, que es posible obtener retención funcional en una prótesis parcial removible de vía de carga dentaria sin utilizar retenedores en el sector anterior. Métodos: se utilizaron 7 modelos maxilares en yeso tipo IV, con distinto tipo de desdentamiento, cuya característica común era que correspondían a clases III de Kennedy de arcos parcialmente desdentados. A cada modelo se le confeccionó una base metálica de Cr-Co, de acuerdo con sus características clínicas individuales, las cuales presentaron un diseño que permitió utilizarlas en una máquina de tracción universal para someterlas a fuerzas de tracción. Resultados: la fuerza de tracción necesaria para desalojar las bases metálicas que contaban con retenedores en el sector anterior fue del orden de 16,93 N en promedio. En cambio, las bases metálicas sin retenedores en el sector anterior presentaron un valor promedio para su desalojo de 12,84 N. Conclusiones: los valores promedio obtenidos para ambos grupos son superiores a los que se señala en la literatura (4,903 N) como válidos para una retención adecuadamente funcional para una prótesis parcial removible.


Asunto(s)
Dentadura Parcial Removible , Retenedores Ortodóncicos , Estética Dental
18.
Indian J Ophthalmol ; 2020 Jan; 68(1): 54-57
Artículo | IMSEAR | ID: sea-197699

RESUMEN

Purpose: Corneal foreign bodies (CFBs) due to occupational exposure have been largely ignored in Indian literature, especially nonmetal workers. Our study looks at a broad range of occupations and settings that contribute to CFB in our local Indian population. The study objective was to determine the occupations, level of education and demographics of patients presenting with CFB acquired during occupational work. Methods: Prospective hospital-based study at a tertiary eye hospital in Gurgaon, Haryana, India, within duration of 9 months. Patients presenting with CFB were asked a set of questions relating to their occupation, level of education, understanding of the potential complications of CFB, and demographics. Results: A total of 83 patients were included in the study. CFB were attributed only to males. 66% of patients were in the age group of 14--29 years. 30% of patients were in the age group 30--44 years and 4% of patients were between 45 and 60 years old. The metal work industry was responsible for 47% of presentations. The construction industry was responsible for 27% of presentations. Electricians and carpenters combined were responsible for 10% of presentations and 17% of presentations occurred in other sectors. Conclusion: CFB occur across a number of occupations in the construction industry, not just metallic workers. Among a population that is generally poorly educated and have nominal understanding of the impact that CFB can have on vision, occupational hazard education is necessary to address this problem.

19.
Chinese Journal of Tissue Engineering Research ; (53): 2597-2604, 2020.
Artículo en Chino | WPRIM | ID: wpr-847609

RESUMEN

BACKGROUND: Three-dimensional (3D) printing technology has been applied to fabricate the personalized metallic biomaterials with low elastic modulus, low cost and precision, aiming at overcoming the defects of the biomaterials fabricated by the traditional technology. OJECTIVE: To summarize the development of metallic biomaterials fabricated by the 3D printing technology. METHODS: The articles were searched by using the databases of PubMed and CNKI. The key words were “metallic biomaterials, metallic 3D printing technology, surgical implants, oral application and cardiovascular devices” in Chinese and in English. As a result, 92 articles were applied after reading and analyzing the title and abstract of the articles published between June 2010 and June 2020. RESULTS AND CONCLUSION: In biomedical applications, metallic 3D printing technology can be divided into two categories: powder bed selective melting and directional energy deposition. Metallic 3D printing enables mass production of metal implants with complex geometric shapes and internal structures, as well as customized medical implant production that meets the needs of specific patients. Faced with many metallic printing technologies, it is necessary to choose a suitable additive manufacturing process according to the complexity and different design of materials. At present, 3D printing of metallic biomaterials such as titanium and cobalt-chromium alloys has made substantial progress, and has been used in clinical orthopedics, dentistry and vascular surgery. Research on 3D printing metal biomaterials based on magnesium and iron is still carried on.

20.
Chinese Journal of Tissue Engineering Research ; (53): 4429-4436, 2020.
Artículo en Chino | WPRIM | ID: wpr-847290

RESUMEN

BACKGROUND: In the treatment of bone defect or bone injury by tissue engineering, biomaterials affect the survival rate, proliferation and differentiation of bone marrow mesenchymal stem cells. OBJECTIVE: To review the research progress regarding how biomaterials affect the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells, and to guide the rational application of biomaterials. METHODS: A computer-based online search of CNKI, PubMed, Web of Science, and Wanfang database with the search terms “Bone marrow mesenchymal stem cells, Osteogenic differentiation, Biological materials, The microstructure”. The eligible literatures regarding the effects of different biomaterials on the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells were included. RESULTS AND CONCLUSION: (1) Metallic materials have the advantages of good biocompatibility, bone conductivity, and mechanical performance. Non-metallic materials exhibit good biocompatibility, bone conductivity, reabsorption, and three-dimensional shaping. (2) There are many factors that affect the surface microstructure of the biomaterial. As for the same biomaterial, greater surface energy/ wettability leads to better proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells; greater roughness better promotes the proliferation, adhesion, and differentiation of bone marrow mesenchymal stem cells; larger pore diameter and lower pore diameter rate are more prone to promote the osteogenic differentiation of bone marrow mesenchymal stem cells; greater substrate rigidity and elastic modulus better facilitate the osteogenic differentiation of bone marrow mesenchymal stem cells. The abovementioned factors of the biomaterials affect the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells. These findings help promote the application of biomaterials seeded with bone marrow mesenchymal stem cells in the clinic.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA