Clinical longevity of metallic versus fiberglass intraradicular posts: a systematic review / Longevidade clínica de pinos intraradiculares metálicos versus de fibra de vidro: uma revisão sistemática

Objective: This systematic review aims to compare the clinical longevity of metallic and fiberglass intraradicular posts in teeth with severely compromised crowns, utilizing randomized clinical trials and case reports published in the last eleven years. Material and Methods: The research was conducted on PubMed, Medline, Lilacs, and BBO databases using the first search strategy with the descriptors 'dental posts,' 'longevity,' 'fiberglass-reinforced posts' or 'metallic posts.' The second search strategy involved analyzing the references of articles identified by the first search. Both studies were carried out with stringent inclusion and exclusion criteria. Results: No statistically significant and clinically relevant differences in longevity were observed between metallic and fiberglass posts. Conclusion: The clinical success and durability of the restorative procedure using intraradicular posts primarily depend on the remaining amount around the post (ferrule), the type and position of the tooth in the arch (impacting the masticatory forces exerted on the restored tooth), and the correct application of the cementation technique. It is noteworthy that fiberglass posts offer substantial advantages by presenting a modulus of elasticity similar to dental structure, ensuring a more homogeneous distribution of masticatory forces and reducing the risk of fractures. These findings have practical implications for material selection in restorative procedures involving intraradicular posts.(AU)

Objetivo: Esta revisão sistemática visa comparar a longevidade clínica de pinos intrarradiculares metálicos e de fibra de vidro em dentes com coroas severamente comprometidas, através de estudos clínicos randomizados e relatos de casos, publicados nos últimos onze anos. Material e Métodos: A pesquisa foi conduzida nas bases de dados PubMed, Medline, Lilacs e BBO, utilizando a primeira estratégia de busca com os s 'pinos dentais' e 'longevidade' e 'pinos reforçados com fibra de vidro' ou 'pinos metálicos'. A segunda estratégia de busca consistiu na análise das referências dos artigos identificados pela primeira estratégia. Ambos os estudos foram delineados com critérios rigorosos de inclusão e exclusão. Resultados: Não se constataram diferenças estatisticamente significativas e clinicamente relevantes na longevidade entre pinos metálicos e de fibra de vidro. Conclusão: O êxito clínico e a durabilidade do procedimento restaurador empregando pinos intrarradiculares dependem primordialmente da quantidade de remanescente ao redor do pino (férula), do tipo e posição do dente na arcada (o que impacta nas forças mastigatórias exercidas sobre o dente restaurado) e da aplicação correta da técnica de cimentação.Destaca-se que o pino de fibra de vidro oferece vantagens substanciais ao apresentar módulo de elasticidade similar à estrutura dentária, assegurando uma distribuição mais homogênea das forças mastigatórias e reduzindo o risco de fraturas (AU)

Comparison of Fracture Resistance of Endodontically Treated Teeth Restored with Different Aesthetic Post and Core Systems Under All Ceramic Restoration Luted with Two Types of Cements

Context: Fracture of endodontically treated teeth is a grave sequela that a clinician should seriously ponder. Suitable selection of restorative materials is a requisite for long?term clinical success. Aims: To compare the fracture resistance of endodontically treated teeth restored with three different posts luted using two different cements under all ceramic crowns. Settings and Design: This in vitro study was conducted in the Department of Prosthodontics, Government Dental College, Kottayam, Kerala, India. Methods and Material: Thirty endodontically treated single?rooted mandibular premolars in which post spaces were prepared and divided into three different groups. Group 1 (n = 10): zirconia post group. Group 2 (n = 10): quartz fibre post group. Group 3 (n = 10): glass fibre post group. Each group is sub?divided into two based on the luting system: resin?modified glass ionomer cement (RMGIC) or dual?cure resin cement (DCRC). The fracture resistance testing was performed in a universal testing machine with a crosshead speed of 0.5 mm/min. Statistical Analysis Used: The mean fracture resistance were analysed using independent sample Student t?test and one?way ANOVA. Results: Within the zirconia post group, the mean fracture resistance was higher in DCRC sub?group compared to the RMGIC sub?group and the difference was statistically significant (p = 0.017). The difference in fracture resistance between three different post systems was not found to be statistically significant with respect to both the luting systems. Conclusions: It was observed that when zirconia post is used, the mean fracture resistance was higher in dual?cure resin group compared to the resin?modified GIC group.

The Effect of Community Health Information System on Health Care Services Utilization in Rural Ethiopia

BACKGROUND: The Health Extension Program (HEP) was introduced in 2003 to extend primary health care services by institutionalizing the former volunteer-based village health services. However, this program is not comprehensively evaluated. MATERIALS AND METHODS: The 2019 comprehensive national assessment of HEP involved (1) assessment through quantitative and qualitative primary data, (2) a thorough systematic review of the HEP literature, and (3) a synthesis of evidence from the two sources. The assessment included household survey(n=7122), a survey of health extension workers (HEWs) (n=584) _, and an assessment of health posts (HPs)(n=343) and their supervising health centers (HCs)(n=179) from 62 randomly selected woredas. As part of the comprehensive assessment. OUTPUT AND RESULTS: The outputs were (a) full and abridged reports, (b) 40 posters, (c) seven published, three under review scientific papers and (d) seven papers in this special issue. During the one-year period preceding the study, 54.8% of women, 32.1% of men, and 21.9% of female youths had at least a one-time interaction with HEWs. HPs and HEWs were universally available. There were critical gaps in the skills and motivation of HEWs and fulfillment of HP standards: 57.3% of HEWs were certified, average satisfaction score of HEWs was 48.6%, and 5.4% of HPs fulfilled equipment standards. CONCLUSIONS: The findings informed policy and program decisions of the Ministry of Health, including the design of the HEP Optimization Roadmap 2020­2035 and the development Health Sector Transformation Plan II. It is also shared with global community through published papers.

The Quality of Logistics Management Information System and the Availability of Tracer Drugs at Health Posts in Rural Ethiopia: A Mixed-Method Study

BACKGROUND: Proper implementation of the logistics management information system (LMIS) would facilitate access to essential pharmaceutical products. It also prevents wastage at health posts. The aim of this study was to assess the implementation of the LMIS and the availability of tracer drugs at health posts in rural Ethiopia. METHODS: We employed a cross-sectional descriptive design with a mixed-method approach. The data used for this paper was collected from March to May 2019 as part of the National HEP assessment. The study involved 343 health posts randomly selected from nine regions of Ethiopia. Women's Development Army members and household heads participated in the qualitative study (i.e. in FGD and KII). The quantitative data were exported from Open Data Kit (ODK) to Stata 15.1 for statistical analysis, and the qualitative data were entered into NVivo 12 and analyzed using thematic content analysis. RESULTS: Of the health posts, 59.4% had a space for storing drugs; less than half (41.9%; 95% confidence interval (CI) [36%, 48%]) had a functioning refrigerator. The mean percentage of the availability of selected tracer drugs at health posts was 59.6%, with a 95% CI (58.9%, 60.3%). Bin cards were available at 43% (95% CI [40%, 46%]) of health posts, and among these, only 27.5% of the health posts adequately used the bin cards. CONCLUSION: The absence and poor use of LMIS tools was observed at health posts. Proper implementation of the LMIS has the potential to improve the availability of essential drugs that, in turn, improve health post level delivery of health services.

Influence of customization and light-curing device on the bond strength of glass fiber posts - in vitro study / Influência da reanatomização e do aparelho fotopolimerizador na resistência de união de pinos de fibra de vidro - estudo in vitro

Introduction: Endodontically treated teeth are usually affected by extensive structure loss requiring the use of intraradicular posts to provide retention and restoration. Objective: An in vitro assessment was performed on the bonding of glass fiber posts to the root dentin. Material and method: Ninety (n = 10) single bovine roots were used in a 3 x 3 x 3 factorial study with subdivided plots: post customization varying the presence and type of resin (without customization, conventional resin, and Bulk Fill resin), light-curing device (Valo, Radii-Cal, Rainbow), and root third (cervical, middle, and apical). Result: For the customization factor, Tukey's test (5%) showed the superiority of the Bulk Fill (8.16 MPa) and Z350 (7.40 MPa) groups compared to the control group (4.92 MPa), without differing from each other. All light-curing devices differed, showing the superiority of Valo (9.36 MPa), Radii (6.96 MPa) as an intermediate, and the inferiority of Rainbow (4.17 MPa). The cervical root third (7.81 MPa) was superior, the apical third was inferior (5.80 MPa), and the middle third (6.88 MPa) was an intermediate without differing from the others. Conclusion: The customization of glass fiber posts increases the bond strength to the root dentin, regardless of the resin used. There was a compromise in the apical third and when using light-curing devices with lower light intensity.

Introdução: Dentes com extensa perda de estrutura podem comprometer a retenção das restaurações ao remanescente dental, onde pinos intraradiculares são indicados. Objetivo: Avaliou-se in vitro a união de pinos de fibra de vidro à dentina radicular em função de diferentes modos de reanatomização, fotopolimerizadores e regionalização radicular. Material e método: Noventa (n=10) raízes bovinas uniradiculares foram usadas num estudo fatorial 3 x 3 x 3 com parcelas subdivididas: Reanatomização do pino, variando a presença e tipo de resina (Sem reanatomização, Resina Convencional e Resina Bulkfill); Fotopolimerizador (Valo, Radii-cal, Rainbow); e Terço radicular (cervical, médio e apical). Resultado: O teste de Tukey (5%) evidenciou para o Fator Reanatomização superioridade dos grupos BulkFill (8.16MPa) e Z350 (7.40MPa) ao grupo Controle (4.92MPa), sem diferirem entre si. Todos os fotopolimerizadores diferiram entre si, com superioridade de Valo (9.36MPa), Radii (6.96MPa) intermediário, e inferioridade de Raiwbow (4.17MPa). O terço radicular cervical (7.81MPa) foi superior e o apical inferior (5.80MPa), com o terço médio (6.88MPa) intermediário e sem diferir dos demais. Conclusão: Conclui-se que a reanatomização de pinos de fibra de vidro aumenta a resistência de união à dentina radicular, independentemente da resina utilizada, havendo prejuízo no terço apical e quando são empregados fotopolimerizadores com menor intensidade luminosa.

Influência da férula na resistência à fratura de restaurações com utilização ou não de retentores intrarradiculares em dentes tratados endodonticamente: uma revisão da literatura / Influence of the ferrule on the fracture resistance of restorations with or without the use of intraradicular posts in endodontically treated teeth: a literature review

Objetivo: realizar uma revisão de literatura narrativa sobre a importância e a influência do efeito férula na resistência à fratura de restaurações em dentes tratados endodonticamente com utilização ou não de retentores intrarradiculares. Metodologia: Foram utilizados os seguintes descritores indexados no DeCS (Descritores em Ciências da Saúde): "Férula", Prótese Dentária", "Falha da Restauração Dentária", "Técnica de Retentor Intrarradicular" e "Pinos de Retenção Dentária" para busca nas bases de dados PubMed, Embase, Lilacs, Web of Science, Scopus e Cochrane Library. Resultados: Os dados da maioria dos estudos in vitro ou in vivo incluídos nesta revisão sugerem o uso da férula para aumento da resistência à fratura e longevidade dos dentes tratados endodonticamente. Tem sido recomendada a confecção de uma férula com altura uniforme de 2 mm e espessura superior a 1,5 mm. Conclusão: O uso de retentores radiculares foi indicado pela maioria dos trabalhos, sendo geralmente recomendados os pinos de fibra de vidro ao invés de núcleos metálicos fundidos para minimizar os riscos de fratura radicular em razão do módulo de elasticidade semelhante à dentina, além de possibilidade de retratamentos em casos de falhas adesivas. Apesar disso, ainda são necessários estudos clínicos com acompanhamento a longo prazo para avaliar a longevidade das restaurações de dentes tratados endodonticamente utilizando pinos de fibra de vidro sem ou com a presença de férula em diferentes espessuras e alturas.

Objective: This study aimed to conduct a narrative literature review on the importance and influence of the ferrule effect on the fracture resistance of restorations in endodon-tically treated teeth with or without the use of intraradicular posts. Methodology: The following descriptors indexed in the DeCS (Health Sciences Descriptors) were used: "Ferrule", Dental Prosthesis", "Dental Restoration Failure", "Post and Core Technique", and "Dental Posts", to search on the databases of PubMed, Embase, Lilacs, Web of Science, Scopus, and Cochrane Library data. Results: Data from most of the in vitro or in vivo studies included in this review suggest the use of the ferrule to increase fracture resistance and longevity of endodontically treated teeth. It has been recommended to make a ferrule with a uniform height of 2 mm and a thickness greater than 1.5 mm. Conclusion: The use of intraradicular posts was indicated by most studies, and fiberglass posts are generally recommended instead of cast metal cores to minimize the risk of root fracture due to the modulus of elasticity similar to dentin, in addition to the possibility of retreatments in ad-hesive failure cases. Despite this, clinical studies with a long-term follow-up are essential to evaluating the longevity of restorations of endodontically treated teeth using fiberglass posts without or with the presence of ferrule in different thicknesses and heights.

Characteristics of noise hazard in a nuclear power station / 中国职业医学

OBJECTIVE: To analyze the characteristics of noise hazard in a nuclear power station. METHODS: The workplaces and working posts which exposed to occupational noise from two 1 000 MW power units in one nuclear power station in Guangdong Province was selected as study subjects using the convenience sampling method. Occupational health survey, noise measurement in the workplace and personal noise dosage measurement were used to monitor noise exposure, and to analyze the characteristics of occupational noise in the nuclear power station. RESULTS: The noise sources of the nuclear power plant were mainly distributed in the nuclear island, conventional island, and peripheral workshops. A total of 237 points of noise intensity were measured in the workplace. The intensity of noise ranged from 66.0 to 99.6 dB(A). The noise intensity in 62.4%(148/237) of points was equal or greater than 80.0 dB(A) and 34.2%(81/237) equal or greater than 85.0 dB(A). The percentage of detection points with noise intensity was equal or greater than 85.0 dB(A) from low to high were nuclear island, conventional island, and peripheral workshops with 22.0%, 37.5% and 53.8% respectively(P<0.01). The personal noise intensity of three positions including inspectors of operation department, preparation and main engine positions of mechanical department exceeded the occupational exposure limit(OEL), and the percentage of positions whose noise intensity exceeded the OEL was 9.7%(3/31). CONCLUSION: High-intensity noise sources of the nuclear power plant are widely distributed in the workshop areas of nuclear island, conventional island, and peripheral workshops. The noise level of some positions exceeded the standards of noise intensity. The prevention and control measures of noise hazards in posts with excessive noise should be strengthened.

Nueva técnica de reconstrucción postendodóncica: resina bulk-fill intraconducto vs postes de fibra de vidrio / New postendodontic reconstruction technique: bulk-fill intracanal resin vs glass fiber posts

Introducción: El uso de postes de fibra de vidrio es el método actual más utilizado para la reconstrucción postendodóncica. Sin embargo, su adhesión sigue siendo impredecible debido al control limitado de su técnica de cementación. Las resinas bulk-fill revelan valores de fuerza flexural similares a la dentina y su empleo en la reconstrucción postendodóncica podría ser una alternativa viable y conservadora. Objetivo: Comparar tres técnicas de reconstrucción postendodóncica al medir su resistencia a fuerzas de desalojo, clasificar el tipo de fractura y falla adhesiva, evaluar su costo y tiempo de trabajo. Material y métodos: Se realizan 18 muestras divididas en tres grupos: grupo 1: poste más cemento de un paso, grupo 2: poste más cemento de tres pasos y grupo 3: reconstrucción postendodóncica con resina bulk-fill. Resultados: En la evaluación de la fuerza al desalojo no se encontró diferencia estadísticamente significativa en los tres grupos. Respecto al comportamiento y falla adhesiva, se encontró una diferencia significativa p < 0.001, favoreciendo a los grupos 2 y 3, por su adhesión en la porción radicular. El tipo de fractura fue restaurable para los tres grupos. Respecto al tiempo y costo, fueron significativamente menores para el grupo 3. Conclusión: En nuestro estudio no existió diferencia significativa en la fuerza al desalojo en los tres grupos; sin embargo, la hubo en el comportamiento, falla adhesiva, costo y tiempo, favoreciendo mayormente al grupo 3. La técnica de reconstrucción con resina puede ser una técnica predecible, suficientemente resistente, conservadora, rápida y de menor costo

Introduction: The use of fiberglass posts is the current method most used for post-endodontic reconstruction. However, its adhesion remains unpredictable due to the limited control of its cementing technique. Bulkfill resins reveal values of flexural strength similar to dentin and their use in post-endodontic reconstruction could be a viable and conservative alternative. Objective: Compare three post-endodontic reconstruction techniques by measuring their resistance to eviction forces, classifying the type of fracture and adhesive failure, evaluating their cost and time of work. Material and methods: 18 samples are divided into 3 groups: group 1: post plus cement of 1 step, group 2: post plus cement of 3 steps and group 3: post-endodontic reconstruction with bulk-fill resin. Results: In the evaluation of the force to the eviction, no statistically significant difference was found in the 3 groups. Regarding the behavior and adhesive failure, a significant difference was found p < 0.001, favoring groups 2 and 3, due to its adhesion in the root portion. The type of fracture was restorable for the 3 groups. Regarding time and cost, they were significantly lower for group 3. Conclusion: In our study there was no significant difference in the force to the eviction in the three groups, however there was in the behavior, adhesive failure, cost and time, favoring mainly the group 3. The technique of reconstruction with resin can be a predictable technique, Sufficiently resistant, conservative, fast and of lower cost (AU)

Effect of different root dentin pretreatment protocols on the bond strength of fiber posts cemented with core buildup material / Efeito de diferentes protocolos de pré tratamento de dentinas radiculares na força de adesão de pinos de fibra cimentados com material de núcleo de preenchimento

Objective: The purpose of the study was to evaluate the push out bond strength of fiber posts -after cementaion with core build up material and dentin pretreatment using different adhesive protocolsin different root regions. Material and Methods: 28 endodonticaly treated human premolars were divided into 4 groups. The post spaces were treated with 1 of 4 different dentin bonding protocols: total etch light cured adhesive, solobond m; total etch dual cured adhesive, Excite f DSC; self-etching light cured adhesive, single bond universal; or selfetching dual cured adhesive, futura bond dc. Fiber posts, were luted with dual cured core material. The roots were cut into 2-mm-thick sections, in cervical, middle, and apical regions. Push-out tests were performed with a universal testing machine, and bond strength values (MPa) were calculated. Data were analyzed with 1- and 2-way analysis of variance and Tukey multiple comparison tests (a=.05). Failure modes were examined under stereo microscope. Results: The highest mean bond strength values were obtained for self-etch dual cured adhesive, (9.69 MPa). The Total etch light cured adhesive (2.81 MPa) showed the lowest bond strength. Self-etch light-polymerized and total etch dual-polymerized adhesives provided similar bond strengths (5.37, 5.72 respectively). The regional bond strength values were reduced significantly in apical post space (P<0.01). The most predominant failure type was mixed failure followed by adhesive failure. Conclusion: Dentin pretreatment using self-etch dual cured adhesives prior to fiber posts cementation offers a high bond strength. While using total-etch light cured adhesives is not recommended due to the low bonding quality.(AU)

Objetivo: O objetivo do estudo foi avaliar a força de adesão dos pinos de fibra após o cimentação com material de núcleo e o pré-tratamento da dentina utilizando diferentes protocolos adesivos em diferentes regiões radiculares. Material e Métodos: 28 pré-molares humanos tratados endodonticamente foram divididos em 4 grupos. Os condutos foram tratados com 1 de 4 diferentes protocolos de união à dentina: adesivo fotopolimerizável total, solobond m; adesivo de polimerização dual de condicionamento total, Excite f DSC; adesivo fotopolimerizável autocondicionante, Single Bond universal; ou adesivo de dupla curado autocondicionante, futura bond dc. Núcleos de fibra, foram cimentados com material resinoso e polimerizados. As raízes foram cortadas em seções de 2 mm de espessura, nas regiões cervical, média e apical. Testes de push-out foram realizados com uma máquina de testes universal, e os valores de resistência de união (MPa) foram calculados. Os dados foram analisados com análise de variância de 1 e 2 fatores e testes de comparação múltipla de Tukey (a = 0,05). Modos de falha foram examinados sob estéreo-microscópio. Resultados: Os valores médios mais elevados de resistência adesiva foram obtidos para o adesivo dual autocondicionante (9,69 MPa). O adesivo fotopolimerizável Total etch (2,81 MPa) apresentou a menor resistência de união. Os adesivos autocondicionantes fotopolimerizáveis e os de condicionamento tal duais, proporcionaram forças de adesão semelhantes (5,37, 5,72, respectivamente). Os valores de força de união regional foram significativamente reduzidos na região apical (P<0,01). O tipo de falha mais predominante foi falha mista seguida de falha adesiva. Conclusão: O pré-tratamento com dentina utilizando adesivos duais autocondicionantes antes da cimentação dos pinos de fibra oferece uma alta resistência de união. Enquanto que os adesivos de condicionamento total fotopolimerizáveis não sforam recomendados devido à baixa qualidade da adesão proporcionada. (AU)

Evaluation of the effect of chlorhexidine and sodium hypochlorite in adhesive cementation of fiber posts - in vitro study / Avaliação do efeito da clorexidina e do hipoclorito de sódio na cimentação adesiva de pinos - estudo in vitro

Abstract Introduction The attachment of fiberglass posts is achieved through an adhesive process. Failures in adhesion may occur due to the hydrolytic degradation of the adhesives, or to the degradation of the collagen fibres of the hybrid layer by intrinsic enzymes. Objective To evaluate the effect of chlorhexidine and sodium hypochlorite treatment on bond strength to dentin. Material and method Thirty bovine roots were randomly distributed into 3 groups (n=10): a) Control, b) 2% Chlorhexidine, and c) 5% Sodium Hypochlorite. Next, RelyX® ARC resin cement was used to cement the post. Each specimen resulted in samples from the three root thirds that were submitted to the pushout test (MPa) at 24 hours and 12 months. Bond strength values were analysed using the Kolmogorov-Smirnov, 3-way ANOVA and Tukey tests. The fracture mode of the pin was also analysed using stereomicroscopy. Result There were no significant differences between treatments at the immediate time (p=0.0644) or in the interaction of factors (p=0.1935). After one year, the experimental groups showed no significant differences in bond strength in relation to the control group, with the exception of the cervical third of the chlorohexidine group in which there was a significant loss of adhesion. As for the fracture mode, there was a predominance of the mixed type in all groups and thirds. Conclusion The use of chlorhexidine or hypochlorite provides neither benefits nor losses in the adhesive bond strength of fiberglass posts. However, there is an influence of the root thirds, with the worst bond strength in the apical third.

Resumo Introdução A fixação de pinos de fibra de vidro é realizada através de um processo adesivo. Falhas podem ocorrer na adesão devido à degradação hidrolítica dos adesivos, ou pela degradação das fibras colágenas da camada híbrida por enzimas intrínsecas. Objetivo Avaliar o efeito do tratamento com clorexidina e hipoclorito de sódio sobre a resistência de união adesiva à dentina. Material e método Trinta raízes bovinas foram distribuídas aleatoriamente em 3 grupos (n=10): a) Controle, b) Clorexidina 2% e c) Hipoclorito de Sódio 5%. Após, para a cimentação do pino radicular, utilizou-se o cimento resinoso RelyX® ARC. Cada espécime resultou corpos-de-prova dos três terços radiculares, os quais foram submetidos ao teste de pushout (MPa) nos períodos de 24 horas e 12 meses. Valores de resistência de união foram analisados pelos testes de Kolmogorov-Smirnov, ANOVA (three-way) e de Tukey. Analisou-se ainda o modo de fratura do pino, através de estereomicroscopia. Resultado Não houve diferenças significativas entre tratamento no tempo imediato (p=0,0644) ou na interação dos fatores (p=0,1935). Após um ano, os grupos experimentais não promoveram diferença significante na resistência de união em relação ao controle, com exceção do terço cervical do grupo clorexidina, onde houve uma perda significativa de adesão. Quanto ao modo de fratura, houve predominância do tipo mista em todos os grupos e terços. Conclusão O uso de clorexidina ou hipoclorito não promove benefícios ou prejuízos na resistência de união adesiva de pinos de fibra, mas há influência dos terços radiculares, sendo a pior resistência de união no terço apical.

Effect of surface treatment reagents and treatment time on bond strength of glass fiber posts to resin cement / 中国组织工程研究

BACKGROUND: At present, there is no uniform standard for the treatment time of chemical reagents for surface treatment of glass fiber posts. Therefore, studying the effect of treatment time of glass fiber post surface treatment reagents on the bond strength between fiber posts and resin cements is of great significance. OBJECTIVE: To evaluate the effect of two chemical agents on the bonding strength of glass fiber post and resin cement after surface pretreatment of glass-fiber posts at different times. METHODS: Forty-eight glass fiber posts were randomly divided into eight groups according to different surface treatment methods, six in each group. Group A received no special treatment; group B was treated with silanization for 1 minute; group C1 underwent a 30% hydrogen peroxide surface treatment for 5 minutes prior to 1-minute silanization; group C2underwent a 30% hydrogen peroxide surface treatment for 10minutes prior to 1-minutesilanization; group C3 underwent a 30% hydrogen peroxide surface treatment for 15 minutes prior to 1-minute silanization; group D1 underwent a 35% phosphoric acid surface treatment for 30 seconds prior to 1-minute silanization; group D2 underwent a 35% phosphoric acid surface treatment for 60 seconds prior to 1-minute silanization; group D3 underwent a 35% phosphoric acid surface treatment for 90 seconds prior to 1-minute silanization. The surface morphology of the treated glass fiber posts was observed under scanning electron microscope. The glass fiber post was bonded to the resin cement to form a cylindrical resin block and cut into a thin sample. The sheet was placed on a universal testing machine for micro-extrusion experiments. The failure mode of the specimens was observed under a stereomicroscope. RESULTS AND CONCLUSION: (1) Scanning electron microscope: the surface of the fiber post had different degrees of matrix dissolution and fiber bundle exposure after hydrogen peroxide and phosphoric acid treatment, but did not destroy the integrity of the fiber bundle. (2) Micro-extrusion experiments: the order of the bonding strength was as follows: group C3 > group C2 > group C1 > group D2 > groupD3 > groupD1> group B > group A, and there was significant difference between groups (P< 0.05) except for groups A and B, groups C2 andC3, and groups D2and D3. (3) Stereo microscope: the failure mode in the groups A and B was almost destruction in adhesion. The other six groups showed destruction in adhesion, but the cohesive failure and mixed failure were increased, and the failure mode changed from destruction in adhesion into cohesive failure and mixed failure. (4) These results indicate that the optimal treatment time of 30% hydrogen peroxide is 10 minutes, and the optimal treatment time of 35% phosphoric acid is 60 seconds. 30% hydrogen peroxide solution treatment of fiber post surface for 10 minutes has great clinical application value.

Radiographic analysis of 1000 cast posts in Sergipe state, Brazil / Avaliação radiográfica de 1000 retentores intrarradiculares metálicos fundidos no Estado de Sergipe

Introduction: Endodontically treated teeth with extensive coronary destruction require posts and cores to enable prosthetic restoration. Despite the increasing use of prefabricated posts, cast metal posts and cores are still widely used. The quality of the latter is important for the longevity of restorative treatment, and failure can occur if the fundamental principles are not followed. Objective: To radiographically evaluate the prosthetic principles of 1000 cast metal post-and-core restorations performed in single-rooted teeth and their coherence with the principles used for their confection. Material and method: Digital periapical radiographs of 1000 endodontically treated, single-rooted teeth with cast metal posts and cores were selected from the collection of a radiology clinic (Centro de Imagem, Aracaju/SE, Brazil). The images were analyzed using a measurement software (ImageJ, USA) in accordance with the fundamental prosthetic principles: length and diameter of the post, ratio between post and bone crest, contiguity of post to the root canal, gap between post and the remaining root canal filling, amount of remaining root canal filling, and absence of periapical lesion. The data were qualitatively analyzed, classified into ideal and not ideal, and submitted to the chi-square test (α=0.05). Result: Only 6.7% of the cast metal posts analyzed were satisfactorily fabricated. Conclusion: Many prosthetic criteria are neglected during the manufacturing of cast metal post and cores, resulting in inadequate work that may compromise the longevity of restorative treatments.

Introdução: Dentes com ampla destruição coronária e tratados endodonticamente necessitam de retentores intrarradiculares para viabilizar a restauração protética. Apesar do crescente uso de pinos intrarradiculares pré-fabricados, os retentores intrarradiculares metálicos fundidos ainda são muito utilizados. A qualidade desses é importante para a longevidade do tratamento restaurador, pois podem levar ao insucesso quando seus princípios fundamentais não são seguidos. Objetivo: Avaliar radiograficamente os princípios protéticos de 1000 retentores intrarradiculares metálicos fundidos em dentes unirradiculares e a coerência dos mesmos com os princípios para sua confecção. Material e método: Foram selecionadas radiografias periapicais digitais de 1000 dentes unirradiculares que receberam tratamento endodôntico e retentores intrarradiculares metálicos fundidos, através do acervo de uma clínica radiológica (Centro de Imagem, Aracaju/SE, Brasil). As imagens foram analisadas através de um software de mensuração (ImageJ, EUA) de acordo com os princípios fundamentais protéticos: comprimento e diâmetro do pino, relação do pino com a crista óssea, contiguidade ao canal, espaço entre o remanescente obturador e o pino, quantidade de material obturador e ausência de lesão periapical. Os dados foram tabulados, analisados qualitativamente em ideais e não ideais e submetidos ao teste do Qui-Quadrado (α=0,05). Resultado: Apenas 6,7% dos retentores intrarradiculares fundidos analisados foi confeccionado de forma satisfatória. Conclusão: Muitos critérios protéticos são negligenciados durante a confecção de retentores intrarradiculares metálicos fundidos, resultando em trabalhos inadequados que podem comprometer a longevidade do tratamento restaurador.

La mujer cubana: evolución de derechos y barreras para asumir puestos de dirección / Cuban women: evolution of rights and barriers to occupy direction posts

Los derechos de las mujeres cubanas a través de la historia han ido evolucionando como resultado de una incansable lucha. Se realiza una revisión de esta problemática para valorar objetivamente dicha evolución y las barreras que aún existen para que las féminas ocupen cargos de dirección. Se establecen diferentes etapas para el análisis. Se precisaron los momentos de inicio de su derecho al voto, a la igualdad ante el matrimonio y al reclamo del divorcio, comprobándose que estos derechos conquistados por ellas fueron el fruto de grandes luchas por sus reivindicaciones políticas, sociales y culturales. Se expone que existen aún numerosos aspectos que constituyen barreras a la ocupación de cargos de dirección por parte de la mujer, entre ellos los conflictos entre lo laboral y lo doméstico, la necesidad de viajes y traslados al centro laboral diariamente, las responsabilidades familiares, los horarios excesivos y la poca flexibilidad en los mismos, así como el poco tiempo para dedicar a las actividades sociales y recreativas y al cuidado personal (AU).

The rights of Cuban women have evolved through the history as a result of an indefatigable fight. A review of this problem was carried out to objectively appraise that evolution and the barriers still existing for women to occupy managerial positions. Several stages are established to perform the analysis. It was confirmed the date women were given the right to vote, the equality of rights in the marriage and the right of asking for the divorce, stating that these rights conquered by them were the result of a long struggle for their political, social and cultural demands. It is exposed that there are still several aspects arising as barriers against women occupying direction posts, among them the conflicts between work tasks and house tasks, trips for working reasons, daily displacement to work, the excessive hours and the little flexibility in them, and also the few time for social and leisure time activities, and for personal care (AU).

Estabilizador Endodóntico en Fractura Complicada de Raíz en visita única / Endodontic Stabilizer in Complicated Root Fracture in a single visit

Introducción: La fractura complicada de raíz del tercio medio es una entidad compleja de pronóstico mayormente desfavorable y curso sintomático, donde el éxito clínico en no pocas oportunidades se convierte en una utopía, dado que la estabilidad en el afrontamiento de los bordes libres de los fragmentos fracturados es difícil de lograr. En este sentido el estabilizador edodóntico busca garantizar un anclaje bilateral satisfactorio, que posibilite unificar en una consulta los tiempos operatorios necesarios para un tratamiento exitoso. Objetivo: Describir la factibilidad del uso de un estabilizador endodóntico en el manejo de una fractura complicada de raíz del tercio medio en una visita. Presentación del caso: Paciente de 60 años, femenina que acude a consulta tras sufrir traumatismo dentoalveolar consistente con fractura complicada de raíz del tercio medio en 21; a los rayos X se observa ligero ensanchamiento periodontal y bordes discontinuos. Se realiza tratamiento edodóntico radical mediante la aplicación de un estabilizador intraconducto en la reducción de la fractura. Conclusiones: El uso de un estabilizador endodóntico en el manejo de una fractura complicada de raíz del tercio medio realizado en una sola visita es una alternativa factible de realizar en el tratamiento mediato e inmediato, ya que supone una rápida recuperación de las funciones buco-dentales del paciente(AU)

Introduction:The complicated fracture of the medium third of the root is a complex entity, particularly with an unfavorable prognosis and a symptomatic course in which the clinical success becomes a utopia in not just a few opportunities because the stability by confrontation of the free edges of the fractured fragments is difficult to achieve. In this respect, the endodontic stabilizer is used to guarantee a satisfactory bilateral anchorage that gives the possibility to unify, in a single visit, the necessary operation times for a successful treatment. Objective: To describe the feasibility of the use of an endodontic stabilizer in the management of a complicated fracture of the medium third of the root in a single visit. Case presentation: Female 60-year-old patient who comes to the consulting room after suffering from a consistent dentoalveolar trauma with a complicated fracture of the medium third of the root in tooth no.21; radiograph reveals a slight periodontal widening, and discontinuous edges. Radical endodontic treatment is performed with the placement of an intraductal stabilizer in the reduction of the fracture. Conclusions: The use of an endodontic stabilizer in the management of a complicated fracture of the medium third of the root in a single visit to the dentist is a feasible alternative in the mediate and immediate treatment seeing that it supposes a fast recovery of the bucco-dental functions of the patient(AU)

Influence of elastic modulus of intraradicular posts on the fracture load of roots restored with full crowns / Influência do modulo de elasticidade de retentores intrarradiculares na carga para fratura de raízes restauradas com coroas totais

Objective: This study aimed to evaluate the fracture load and displacement of roots restored with posts of different elastic modulus. Material and method: Thirty-six replicas of epoxy resin mixed with glass microfibers were made from an endodontically-treated human premolar root prepared to a length of 12 mm with a custom drill, leaving the apical 4 mm unprepared. Replicas were randomly restored with (n = 12): FP-LM (fiber post with low elastic modulus- 50 GPa), FP-HM (fiber post with high elastic modulus - 67 GPa) and MP (metallic post - 208 GPa), using self-curing adhesive and dual resin cement. Cores were built up with composite resin and metallic crowns were cemented in all the roots with self-adhesive resin cement with self-curing mode. Specimens were subjected to a fracture load test (45° inclination/0.5 mm/min) and displacement was registered at 100 N. Result: One-way ANOVA showed that elastic modulus of the post did not affect the fracture load means (p = 0.203) (FP-LM: 237.4 ± 65.11 N; FP-HM: 236.7 ± 92.85 N; MP: 295.8 ± 108.7 N) but was statistically significant for the displacement (p < 0.00): Tukey's test showed that FP-LM displacement mean (0.81 ± 0.15 mm) was significantly higher than those for FP-HM (0.46 ± 0.26 mm; p = 0.00) and MP (0.62 ± 0.07 mm; p = 0.04). Conclusion: Posts with different elastic modulus exhibit similar fracture loads, but a lower displacement is achieved when fiber posts with a high elastic modulus and metallic posts are used.

Objetivo: Este trabalho avaliou a carga para fratura e deslocamento de raízes restauradas com pinos de diferentes módulos de elasticidade. Material e método: Trinta e seis réplicas de microfibras de vidro embutidas em resina epóxi foram fabricadas a partir de uma raiz de um pré-molar tratado endodonticamente preparado em 12 mm de comprimento com brocas customizadas, deixando 4 mm apicais sem preparo. As raízes foram randomicamente restauradas com (n = 12): FP-LM (pino de fibra com um baixo módulo de elasticidade - 50 GPa), FP-HM (pino de fibra com um alto módulo de elasticidade - 67 GPa) e MP (pinos metálicos - 208 GPa), usando adesivo autopolimerizável e cimento resinoso dual. Núcleos foram confeccionados com resina composta e coroas metálicas foram cimentadas em todas as raízes com cimento resinoso autoadesivo com modo de polimerização químico. Os espécimes foram submetidos ao teste de fratura em 45° (inclinação de 45° / 0,5 mm/min) e o deslocamento foi registrado aos 100 N. Resultado: Anova 1 fator mostrou que o módulo de elasticidade dos retentores não afetou as médias de fratura (p = 0,203) (FP-LM: 237,4 ± 65,11 N; FP-HM: 236,7 ± 92,85 N; MP: 295,8 ± 108,7 N) mas foi estatisticamente significante para o deslocamento (p < 0,00): o teste de Tukey mostrou que a média de deslocamento do grupo FP-LM (0,81 ± 0,15 mm) foi significativamente maior do que o grupo FP-HM (0,46 ± 0,26 mm; p = 0,00) e MP (0,62 ± 0,07 mm; p = 0,47). Conclusão: Pinos com diferentes módulos de elasticidade mostram resistência similar, porém um menor deslocamento é obtido quando pinos de fibra com alto módulo de elasticidade (FP-HM/MP) são usados.

Efecto del tratamiento de superficie en la fuerza de adhesión de postes de resina reforzados con fibras de cuarzo a los cementos de resina: Estudio in vitro

14. El propósito de este estudio fue determinar el efecto que ejercen distintos tratmientos de superficie en la fuerza de adhesión entre el cemento de resina y los postes de resina reforzados con fibras de cuarzo. Materiales y métodos: Sesenta postes de fibra de cuarzo (DT Light-Post™, Bisco™) se asignaron aleatoriamente a 12 grupos experimentales (n=5), según el cemento de resina utilizado (Biscem™ o Duolink™) y el tipo de tratamiento de superficie: limpieza con alcohol (grupo control), silanizado, primer, arenado, arenado+silanizado o arenado+primer. Se obtuvieron especímenes cilíndricos de resina utilizando resina nanohíbrida. Los postes se cementaron a los discos de resina y se sometieron a pruebas de push-out. Los datos se analizaron con ANOVA y prueba T para comparación de promedios y la prueba Tukey HSD con un nivel de significancia del 95%. Resultados: El cemento Biscem™ presentó, en general, una mayor fuerza de adhesión a los postes al compararse con el Duolink™. Se encontró diferencia significativa entre en grupo control y los grupos de arenado+silano y arenado+primer al utilizar el cemento Duolink™. Con el cemento Biscem™ no hubo diferencias entre grupos o con el grupo control. Conclusión: Los tratamientos de superficie en los postes de resina reforzados con fibra de cuarzo parecen no tener un efecto significativo en la fuerza de adhesión a los cementos de resina evaluados en este estudio, excepto al utilizar el cemento Duolink™ realizando el arenado y además se utilizando el silano o el primer.

18. The purpose of this study was to determine the effect of different surface treatments on the bond strength between resin cements and quartz fiber-reinforced resin posts. Materials and methods: Sixty quartz fiber-reinforced resin posts (DT Light-Post™, Bisco™) were randomly divided into 12 experimental groups (n=5), according to the resin cement used (Biscem™ or Duolink™) and the surface treatment: Alcohol (control group), silanized, primer, sandblasted, sandblasted + silanized or sandblasted + primer. Cylindrical resin specimens were obtained using nanohybrid resin. The posts were cemented to the resin discs and push-out tests were conducted. Data were analyzed with ANOVA and T test for averages comparison and the Tukey HSD test with a 95% level of significance. Results: Biscem™ cement generally showed higher bond strength when compared to Duolink™ Significant differences were found between the control group and the sandblasted + silane and sandblasted + primer groups when using Duolink™cement. With Biscem™ cement, no differences between groups or with the control group were found.. Conclusion: Surface treatments on quartz fiber-reinforced resin poles seem to have no significant effect on the bond strength to resin cements, except when using Duolink™ cement with sandblasted posts and using silane or primer.

Representaciones socioculturales de género y la promoción de cuadros en el sector de la salud, 2013-2016 / Socio-cultural gender representations and promotion of cadres in the health care sector, 2013-2016

Las representaciones de género vinculadas a procesos de promoción a cargos de dirección, son expresión de contradicciones diarias desde la incorporación de las mujeres a espacios gerenciales; revelan la visión histórica sobre los roles socialmente asignados a ambos sexos. Objetivo: Identificar las representaciones socioculturales de los cuadros e investigadores/as, en relación con los requisitos que se tienen en cuenta en los procesos de promoción. Métodos: Investigación con enfoque mixto -2013 hasta 2016-, basada fundamentalmente en el paradigma cualitativo, en tres grupos de trabajo; se utilizó la revisión documental, entrevistas y cuestionarios para recoger la información, se conformaron bases de datos, se realizó el análisis descriptivo a través de distribuciones de frecuencias absolutas y porcentajes. Los datos cualitativos se examinaron por medio del análisis de contenido y del método inductivo deductivo. Resultados: Los requerimientos para ser seleccionados como cuadros están definidos en documentos legales. La formación técnica-profesional, experiencia, trayectoria laboral y el reconocimiento del desempeño en cargos anteriores, son requisitos considerados más frecuentes, que casi siempre se tienen en cuenta en la promoción. En los discursos de los cuadros se perciben otros requisitos que definen la selección. Conclusiones: Los requisitos en mujeres y hombres para promover como cuadros son iguales, al estar legalmente vigentes en el país, pero en los discursos se refleja influencia de las culturas sociales e institucionales en la promoción. En hombres, las representaciones estuvieron asociadas a responsabilidades de las mujeres con la atención a hijos y no con el reconocimiento a una cultura androcéntrica, como lo hacen las féminas(AU)

Gender representations linked to processes of promotion to management posts express daily contradictions since the incorporation of women to management environments and reveal the historical vision on the roles that are socially assigned to both sexes. Objective: To identify the socio-cultural representations of cadres and researchers with respect to requisites to be considered for promotion processes. Methods: Mixed research study -2013 until 2016- based on the qualitative paradigm of three working groups; document review, interviews and questionnaires were used to collect information; databases were created and a descriptive analysis was made through absolute frequencies distributions and percentages. The content analysis and the induction-deduction method served to analyze the qualitative data. Results: The requisites for selection of cadres are defined in legal documents. The technical and professional formation, experience, length of time at work and recognition of performance in previous posts are considered as the most common requisites that are almost always taken into account for the promotion of a person. In the cadres´ discourses, other requisites are perceived as defining ones for such selection. Conclusions: The requisites for women and men in terms of promotion of cadres are the same according to the present national legislation, but the discourses show the influence of social and institutional cultures on the promotion. In males, the representations are associated to the women´s responsibilities in child care rather than to acceptance of androcentric culture as females do(AU)

Update on effect of ferrule on teeth restored with fiber posts / 口腔疾病防治

@#Among the variety of post and core materials, fiber post is getting more and more popular because of its excellent physical and mechanical characters, superior aesthetics properties. However, it also has some limitations. In the restoration of damaged teeth, there should be more dentin ferrule, and the different designs of ferrule affect the retention, stability and root fracture resistance of teeth restored with fiber posts. The purpose of this article is to give a literature review of the effect of ferrule on teeth restored with fiber posts.

Effects of different fabricating methods on the microleakage for preformed fiber posts / 实用口腔医学杂志

To compare the microleakage of fiber post and resin-core system fabricated by different methods.The roots of 36 recently extracted single-rooted mandibular premolars were undergone endodontic treatment.Fiber posts and Paracore flowable resin composite were used for fabricating post-core restorations.Microleakage was examined by dye penetration method.The microleakage value was significantly higher in Direct-Mold-Cement-Method group(4.94 ± 1.71) mm compared to Direct-Mold-Secondary-Cement-Method group(0.91 ±0.33) mm and Indirect-Mold-Secondary-Cement-Method group (0.87 ± 0.27) mm (P ＜ 0.05).

"On the policy construction of""Cancelling Budgeted Posts"" in the public hospital:Origination, experience and expectation" / 中国卫生政策研究

The institutional origin of Chinese public hospitals' management system of the budgeted post is the former Soviet Union's national economic budget management system, and the realistic origin is the realistic require-ments since 1949 . The reform experiece of both above suggests that the reform policy about cancelling budgeted posts in the public hospitals was not the result of the different pay, the same work dependeds on whether the budgeted post or not, but rooted in defects in management system of the budgeted post, which include the fracture of the ownership and the responsibility subject, the bottleneck of hospital decision-making ability, the obstacles of the talent flowing and separation of the payment system. This policy is only reform strategy of de-administration, rather than promoting the comprehensive marketization of public hospital. so the policy aboutcancelling budgeted posts is the beginning of comprehensive reforms about hospital corporate governance, medical security system, and medical service compensation. The specific methods of the medical service compensation will become the focus of the further reform. According to the foreign reform experiences and our reform practices, Policymakers would get health insur-ance and government purchase as the main compensation methods in future. However, because of the imbalance of e-conomic development, the diffcult of systematic reform, inertia obstacles of the old management system of the budge-ted post, we should make the comprehensive plans and cautiously advance the measures.