Simultaneous biodegradation of phenol and cyanide present in coke-oven effluent using immobilized Pseudomonas putida and Pseudomonas stutzeri

ABSTRACT Discharge of coke-oven wastewater to the environment may cause severe contamination to it and also threaten the flora and fauna, including human beings. Hence before dumping it is necessary to treat this dangerous effluent in order to minimize the damage to the environment. Conventional technologies have inherent drawbacks however, biological treatment is an advantageous alternative method. In the present study, bacteria were isolated from the soil collected from the sites contaminated by coke-oven effluent rich in phenol and cyanide. Nucleotides sequence alignment and phylogenetic analysis showed the identity of the selected phenol and cyanide degrading isolates NAUN-16 and NAUN-1B as Pseudomonas putida and Pseudomonas stutzeri, respectively. These two isolates tolerated phenol up to 1800 mg L-1 and cyanide up to 340 mg L-1 concentrations. The isolates were immobilized on activated charcoal, saw dust and fly ash. The effluent was passed through the column packed with immobilized cells with a flow rate of 5 mL min-1. The isolates showed degradation of phenol up to 80.5% and cyanide up to 80.6% and also had the ability to reduce biological oxygen demand, chemical oxygen demand and lower the pH of effluent from alkaline to near neutral. The study suggests the utilization of such potential bacterial strains in treating industrial effluent containing phenol and cyanide, before being thrown in any ecosystem.

GPo1 alkB gene expression for improvement of the degradation of diesel oil by a bacterial consortium

To facilitate the biodegradation of diesel oil, an oil biodegradation bacterial consortium was constructed. The alkane hydroxylase (alkB) gene of Pseudomonas putida GPo1 was constructed in a pCom8 expression vector, and the pCom8-GPo1 alkB plasmid was transformed into Escherichia coli DH5α. The AlkB protein was expressed by diesel oil induction and detected through SDS-polyacrylamide gel electrophoresis. The culture of the recombinant (pCom8-GPo1 alkB/E. coli DH5α) with the oil biodegradation bacterial consortium increased the degradation ratio of diesel oil at 24 h from 31% to 50%, and the facilitation rates were increased as the proportion of pCom8-GPo1 alkB/E. coli DH5α to the consortium increased. The results suggested that the expression of the GPo1 gene in E. coli DH5α could enhance the function of diesel oil degradation by the bacterial consortium.

Aerobic cyanide degradation by bacterial isolates from cassava factory wastewater

Ten bacterial strains that utilize cyanide (CN) as a nitrogen source were isolated from cassava factory wastewater after enrichment in a liquid media containing sodium cyanide (1 mM) and glucose (0.2% w/v). The strains could tolerate and grow in cyanide concentrations of up to 5 mM. Increased cyanide levels in the media caused an extension of lag phase in the bacterial growth indicating that they need some period of acclimatisation. The rate of cyanide removal by the strains depends on the initial cyanide and glucose concentrations. When initial cyanide and glucose concentrations were increased up to 5 mM, cyanide removal rate increased up to 63 and 61 per cent by Bacillus pumilus and Pseudomonas putida. Metabolic products such as ammonia and formate were detected in culture supernatants, suggesting a direct hydrolytic pathway without an intermediate formamide. The study clearly demonstrates the potential of aerobic treatment with cyanide degrading bacteria for cyanide removal in cassava factory wastewaters.

Screening and optimization of low-cost medium for Pseudomonas putida Rs-198 culture using RSM

The plant growth-promoting rhizobacterial strain Pseudomonas putida Rs-198 was isolated from salinized soils from Xinjiang Province. We optimized the composition of the low-cost medium of P. putida Rs-198 based on its bacterial concentration, as well as its phosphate-dissolving and indole acetic acid (IAA)-producing capabilities using the response surface methodology (RSM), and a mathematical model was developed to show the effect of each medium component and its interactions on phosphate dissolution and IAA production. The model predicted a maximum phosphate concentration in medium containing 63.23 mg/L inorganic phosphate with 49.22 g/L corn flour, 14.63 g/L soybean meal, 2.03 g/L K2HPO4, 0.19 g/L MnSO4 and 5.00 g/L NaCl. The maximum IAA concentration (18.73 mg/L) was predicted in medium containing 52.41 g/L corn flour, 15.82 g/L soybean meal, 2.40 g/L K2HPO4, 0.17 g/L MnSO4 and 5.00 g/L NaCl. These predicted values were also verified through experiments, with a cell density of 10(13) cfu/mL, phosphate dissolution of 64.33 mg/L, and IAA concentration of 18.08 mg/L. The excellent correlation between predicted and measured values of each model justifies the validity of both the response models. The study aims to provide a basis for industrialized fermentation using P. putida Rs-198.

Further characterization of o-nitrobenzaldehyde degrading bacterium Pseudomonas sp: ONBA-17 and deduction on its metabolic pathway

A previously reported o-nitrobenzaldehyde (ONBA) degrading bacterium Pseudomonas sp. ONBA-17 was further identified and characterized. Based on results of DNA base composition and DNA-DNA hybridization, the strain was identified as P. putida. Its degradation effect enhanced with increase of inoculum amount and no lag phase was observed. Higher removal rate was achieved under shaking conditions. All tested ONBA with different initial concentrations could be completely degraded within 5 d. In addition, degradative enzyme(s) involved was confirmed as intra-cellular distributed and constitutively expressed. Effects of different compounds on relative activity of degradative enzyme(s) within cell-free extract were also evaluated. Finally, 2-nitrobenzoic acid and 2, 3-dihydroxybenzoic acid were detected as metabolites of ONBA degradation by P. putida ONBA-17, and relevant metabolic pathway was preliminary proposed. This study might help with future research in better understanding of nitroaromatics biodegradation.

Health impact assessment of decreases in PM10 and ozone concentrations in the Mexico City Metropolitan Area: A basis for a new air quality management program / Evaluación de impacto en salud ante reducciones de PM10 y ozono en la Zona Metropolitana del Valle de México: Base para un nuevo programa de calidad del aire

Objective. To conduct a health impact assessment (HIA) to quantify health benefits for several PM and O3 air pollution reduction scenarios in the Mexico City Metropolitan Area (MCMA). Results from this HIA will contribute to the scientific support of the MCMA air quality management plan (PROAIRE) for the period 2011-2020. Materials and methods. The HIA methodology consisted of four steps: 1) selection of the air pollution reduction scenarios, 2) identification of the at-risk population and health outcomes for the 2005 baseline scenario, 3) selection of concentration-response functions and 4) estimation of health impacts. Results. Reductions of PM10 levels to 20 μg/m³ and O3 levels to 0.050ppm (98 µg/m³) would prevent 2300 and 400 annual deaths respectively. The greatest health impact was seen in the over-65 age group and in mortality due to cardiopulmonary and cardiovascular disease. Conclusion. Improved air quality in the MCMA could provide significant health benefits through focusing interventions by exposure zones.

Objetivo. Realizar una evaluación de impacto en salud (EIS) que documente los beneficios en salud ante diversos escenarios de reducción de PM10 y O3 en el aire de la Zona Metropolitana del Valle de México (ZMVM). Los resultados contribuyen al sustento científico del plan de gestión de calidad del aire (PROAIRE 2011-2020). Material y métodos. La metodología de EIS comprende cuatro pasos: 1) selección de los escenarios de reducción, 2) identificación de la población en riesgo y de los eventos en salud para el año basal 2005, 3) selección de las funciones de concentración-respuesta y 4) estimación del impacto en la salud. Resultados. Reducciones de PM10 a 20μg/m³ y de O3 a 0.050ppm (98 µg/m³) evitarían, respectivamente, cerca de 2 300 y 400 muertes por año. El mayor impacto se observa en el grupo de más de 65 años y en la mortalidad por causas cardiopulmonares y cardiovasculares. Conclusiones. Mejorar la calidad del aire en la ZMVM podría reflejar importantes beneficios para la salud focalizados por zonas o áreas de exposición.

Temporomandibular Disorders in a Sample Population of the Brazilian Northeast

Temporomandibular disorder (TMD) is a common condition. This study is part of a research group and it investigated the prevalence of TMD and myofascial pain and its association with gender, age and socioeconomic class. The sample comprised 100 subjects, aged 15 to 70, users of the Family Health Units' services, in the city of Recife, PE, Brazil. The TMD degree was evaluated using the Research Diagnostic Criteria for TMD and socioeconomic class by the Economic Classification Criteria Brazil. Categorical variables were analyzed by chi-square test for proportions and Fisher's exact test for 2x2 tables, and binary logistic analysis to track the relationship between the independent and dependent variables. According to the results, 42% of the subjects had TMD and 14% myofascial pain. No statistically significant association could be found between TMD and gender or socioeconomic class, but it was found to have statistically significant association with age, and myofascial pain was associated with socioeconomic class. Considering that the results of the present study should be confirmed by further studies and the fact that this was a pilot study, the prevalence must be analyzed with caution.

Disfunção temporomandibular (DTM) é uma condição comum. Este estudo é parte de um grupo de pesquisa e investigou a prevalência de DTM e dor miofascial e suas associações com sexo, idade e classe socioeconômica. A amostra foi composta por 100 indivíduos, com idades entre 15 e 70 anos, usuários das Unidades de Saúde da Família, na cidade de Recife, PE. O grau de DTM foi avaliado usando os Critérios de Diagnósticos Científicos em DTM, e classe socioeconômica com o Critério de Classificação Econômica Brasil. As variáveis categóricas foram analisadas pelo teste do qui-quadrado para proporções e teste exato de Fisher para tabelas 2x2, e a análise logística binária para traçar a relação entre as variáveis independentes e dependentes. De acordo com os resultados, 42% dos indivíduos tinham DTM e 14% dor miofascial. Não houve associação estatisticamente significativa entre DTM e sexo ou classe socioeconômica, mas houve associação estatisticamente significativa com a idade e a dor miofascial foi associada com a classe socioeconômica. Considerando-se que os resultados do presente estudo devam ser confirmados em outros estudos e por causa de sua natureza piloto, a prevalência deve ser analisada com cautela.

Growth kinetics, effect of carbon substrate in biosynthesis of mcl-PHA by Pseudomonas putida Bet001

Growth associated biosynthesis of medium chain length poly-3-hydroxyalkanoates (mcl-PHA) in Pseudomonas putida Bet001 isolated from palm oil mill effluent was studied. Models with substrate inhibition terms described well the kinetics of its growth. Selected fatty acids (C8:0 to C18:1) and ammonium were used as carbon and nitrogen sources during growth and PHA biosynthesis, resulting in PHA accumulation of about 50 to 69% (w/w) and PHA yields ranging from 10.12 g L-1 to 15.45 g L-1, respectively. The monomer composition of the PHA ranges from C4 to C14, and was strongly influenced by the type of carbon substrate fed. Interestingly, an odd carbon chain length (C7) monomer was also detected when C18:1 was fed. Polymer showed melting temperature (Tm) of 42.0 (± 0.2) °C, glass transition temperature (Tg) of -1.0 (± 0.2) °C and endothermic melting enthalpy of fusion (ΔHf) of 110.3 (± 0.1) J g-1. The molecular weight (Mw) range of the polymer was relatively narrow between 55 to 77 kDa.

In situ biosurfactant production and hydrocarbon removal by Pseudomonas putida CB-100 in bioaugmented and biostimulated oil-contaminated soil

In situ biosurfactant (rhamnolipid) production by Pseudomonas putida CB-100 was achieved during a bioaugmented and biostimulated treatment to remove hydrocarbons from aged contaminated soil from oil well drilling operations. Rhamnolipid production and contaminant removal were determined for several treatments of irradiated and non-irradiated soils: nutrient addition (nitrogen and phosphorus), P. putida addition, and addition of both (P. putida and nutrients). The results were compared against a control treatment that consisted of adding only sterilized water to the soils. In treatment with native microorganisms (non-irradiated soils) supplemented with P. putida, the removal of total petroleum hydrocarbons (TPH) was 40.6%, the rhamnolipid production was 1.54 mg/kg, and a surface tension of 64 mN/m was observed as well as a negative correlation (R = -0.54; p < 0.019) between TPH concentration (mg/kg) and surface tension (mN/m), When both bacteria and nutrients were involved, TPH levels were lowered to 33.7%, and biosurfactant production and surface tension were 2.03 mg/kg and 67.3 mN/m, respectively. In irradiated soil treated with P. putida, TPH removal was 24.5% with rhamnolipid generation of 1.79 mg/kg and 65.6 mN/m of surface tension, and a correlation between bacterial growth and biosurfactant production (R = -0.64; p < 0.009) was observed. When the nutrients and P. putida were added, TPH removal was 61.1%, 1.85 mg/kg of biosurfactants were produced, and the surface tension was 55.6 mN/m. In summary, in irradiated and non-irradiated soils, in situ rhamnolipid production by P. putida enhanced TPH decontamination of the soil.

Removal of copper by Pseudomonas putida strain S4 isolated from copper mines.

A bacterial strain, Pseudomonas putida S4, was isolated from smelter drainage of copper mines. The strain exhibited resistance to several heavy metals, like aluminium (Al), zinc (Zn), nickel (Ni), cobalt (Co) besides copper (Cu). Strain S4 could accumulate Cu from the Cu-supplemented growth medium. In the present study, we have demonstrated the Cu2+ removal capacity of this strain from various samples such as mine effluent, low-grade ore and ore-tailings, collected from the mining site. Moreover, approximately 80% of the accumulated Cu2+ could be recovered from the loaded biomass by a simple desorption procedure.