Résumé
Introducción: la pérdida de hueso es un suceso que afecta a la totalidad del esqueleto. Así, las alteraciones musculoesqueléticas afectan a millones de personas en todo el mundo y están entre las causas más comunes de dolor crónico. Objetivo: conocer los efectos de la microvibración y estrógeno en el remodelado óseo. Material y métodos: se realizó una revisión sistemática, se buscó en siete bases de datos, se incluyeron estudios clínicos controlados realizados con ratas o ratones en el periodo de publicación del 2004 al 2022. La calidad de la evidencia sintetizada se evaluó con la escala de Jadad. Resultados: se identificaron quince artículos como estudios primarios. La microvibración reportó cambios in vivo/in vitro totalmente dependientes del estímulo que conlleva incremento de la cortical externa. A su vez, con la administración de estrógeno se reportaron efectos, específicamente, en el hueso trabecular y en el periostio, así como colágeno inmaduro que indican un recambio óseo. Conclusión: tanto la microvibración como la administración de estrógeno coadyuvan a la remodelación del tejido óseo y son aprovechables como tratamiento en el momento que exista un problema de pérdida ósea (AU)
Introduction: Bone loss is an event that affects the entire skeleton. Thus, musculoskeletal disorders affect millions of people worldwide and are among the most common causes of chronic pain. Objective: to know the effects of micro-vibration and estrogen on bone remodelling. Material and methods: a systematic review was carried out; seven databases were searched; Controlled clinical studies conducted with rats or mice in the publication period from 2004 to 2022 were included. The quality of the synthesized evidence was assessed using the Jadad scale. Results: fifteen articles were identified as primary studies. Micro vibration reported in vivo/in vitro changes dependent on the stimulus that entails an increase in the outer cortex. In turn, with the administration of estrogen, effects were reported, specifically in the trabecular bone and in the periosteum, as well as immature collagen that indicates bone turnover. Conclusion: both micro-vibration and the administration of estrogen contribute to the remodelling of bone tissue and are usable as a treatment for bone loss (AU)
Sujets)
Humains , Animaux , SourisRésumé
Periodontium is mechanoresponsive to multiple types of mechanical stimuli like occlusal and orthodontic force and reacts quickly. It is widely used as the loading subject in researches regarding dental mechanical force models both in vivo and in vitro. This review summarized various animal models and cell culture loading methods (including static gravity approach, centrifugation approach, vibration approach, cyclical tension approach, fluid flow approach),as well as parameters for periodontium in recent years, so as to provide references for the study of periodontal mechanoresponsive mechanism and the development of new clinical therapies.
Résumé
Exosomes are extracellular vesicles secreted by cells with a variety of molecular components, which can play the role of substance transport and signal communication between cells through autocrine and paracrine. Exosomes exist widely in vivo and participate in many physiological and pathological processes, including force-related periodontal inflammation. There are stress receptor cells in the periodontium, which can sense force loading on the tooth. An appropriate amount of mechanical loading can maintain health of the periodontium, while excessive mechanical loading may cause destruction and absorption of the periodontium, leading to periodontal inflammation. This article reviews the role of exosomes in force-related inflammation response, especially in periodontal inflammation response.
Résumé
Objective To screen the secretory factor-related, mechanoresponsive microRNAs (miRNA) of osteocytes. Methods Cyclic mechanical tensile strain (ε=2.5,f=0.5 Hz) was applied to osteocytes and osteoblasts cultured in vitro respectively, and the differentially expressed miRNAs only in the osteocytes were screened out by using miRNA chip. Through bioinformatics technology, in these differentially expressed miRNAs, the target genes of secretory factors including insulin-like growth factor-1(IGF-1), nitric oxide synthesase (NOS), fibroblast growth factor 23 (FGF23) and sclerostin (SOST) were further screened out. Then the selected miRNAs were compared with the biochip detected, differentially expressed miRNAs in femur bone of the mice which were trained on treadmill, and four of these miRNAs were randomly selected for quantitative PCR verification. Results For the 77 differentially expressed miRNAs only in the mechanically strained osteocytes in vitro, 22 miRNAs whose target genes were the 4 secreted factors (IGF-1, NOS, FGF23 and SOST), were screened out. Moreover, a total of 11 miRNAs in the 22 miRNAs were differentially expressed in femur bone of the treadmill trained mice with the same trend as those in osteocytes in vitro, and the randomly selected miR-361-3p, miR-3082-5p, miR-6348 and miR-706 were confirmed to be differentially expressed with the same trend in femur bone and osteocytes. Conclusions These mechanoresponsive miRNAs differentially expressed only in osteocytes, such as miR-361-3p, miR-3082-5p, miR-6348 and miR-706, probably influence osteoblastic differentiation or bone metabolism through regulating the secretory factors.
Résumé
Objective To investigate the therapeutic effect of mechanical loading on obesity and non-alcoholic fatty liver disease. Methods Thirty 6-week-old female C57BL/6 mice (body weight 18 g) were randomly assigned into three groups: normal control group (NC group, n=10), high-fat diet group (HF group, n=10) and high-fat diet with mechanical loading treatment group (HF+L group, n=10). All mice except for NC group were fed with high-fat diet for 12 weeks. After 6 weeks of high-fat diet, mice of HF+L group received 6-week mechanical loading. The whole body composition was analyzed to detect the total body fat content. The mesenteric fat, perirenal fat, inguinal fat, periuterine fat and the liver were collected and weighed. A portion of the liver sample was isolated for histological analysis (Oil red O staining and HE staining) to observe pathologic changes, while the other was used for Western blot assay to detect the expression of eIF2α, p-eIF2α and ATF4, which were the marker proteins of endoplasmic reticulum stress. Results Compared with the NC group, high-fat diet resulted in a significant increase in body weight and body fat (P＜0.05). After mechanical loading treatment, the body weight and body fat were significantly decreased in the HF+L group compared with those of HF group (P＜0.05). Hepatic histological analysis showed that high-fat diet induced hepatic steatosis, which was effectively alleviated by mechanical loading treatment (P＜0.05). Western blot analysis indicated that high-fat diet led to higher expression levels of p-eIF2α and ATF4 in liver, and mechanical loading was effective in inhibiting the increased expressions of p-eIF2α and ATF4. Conclusion Mechanical loading can effectively alleviate obesity and non-alcoholic fatty liver disease caused by high-fat diet, and its effects may be associated with endoplasmic reticulum stress in liver.
Résumé
Objective To investigate the role and influence of physiological loading and overloading on microgravity-induced osteoporosis,so as to find a reliable way to prevent or treat related-orthopedic disorders in astronauts induced by long-time space activity.Metbods The microgravity environment in space was simulated by tail-suspension experiment,then the osteoporosis models of mice were built.A total of 32 C57BL/6J mice were randomly and evenly separated into four groups:normal group (normal),tail-suspension group (TS),physiological loading group (loading) and overloading group (overloading).Periodic dynamic mechanical load was applied on the left tibia in loading group and overloading group during tail-suspension test.After four weeks,tibial mechanical properties,micro-parameters of bone trabecular,biochemical indices and osteogenesis-related gene expression in each group were compared and analyzed.Results A great loss of tibial cancellous bone,significantly lower tibial biomechanical expression,serious damage of microstructure and weaker osteogenic activity were found in tail-suspended mice as compared with those of normal group.Physiological loading could clearly improve mechanical properties of bones,microstructure of bone trabecular,osteogenic activity and relative gene expression (P ＜ 0.05).Overloading could also improve the condition of microgravity-induced osteoporosis,but the effect was not obvious (P ＞ 0.05).Conclusions Tail-suspension can successfully simulate microgravity environment and duplicate osteoporosis model.Physiological loading can effectively prevent the emergence and development of microgravity-induced osteoporosis,while overloading can also counter microgravity-induced osteoporosis,but the results have no significant differences.
Résumé
Objective To investigate the role and influence of physiological loading and overloading on microgravity-induced osteoporosis,so as to find a reliable way to prevent or treat related-orthopedic disorders in astronauts induced by long-time space activity.Metbods The microgravity environment in space was simulated by tail-suspension experiment,then the osteoporosis models of mice were built.A total of 32 C57BL/6J mice were randomly and evenly separated into four groups:normal group (normal),tail-suspension group (TS),physiological loading group (loading) and overloading group (overloading).Periodic dynamic mechanical load was applied on the left tibia in loading group and overloading group during tail-suspension test.After four weeks,tibial mechanical properties,micro-parameters of bone trabecular,biochemical indices and osteogenesis-related gene expression in each group were compared and analyzed.Results A great loss of tibial cancellous bone,significantly lower tibial biomechanical expression,serious damage of microstructure and weaker osteogenic activity were found in tail-suspended mice as compared with those of normal group.Physiological loading could clearly improve mechanical properties of bones,microstructure of bone trabecular,osteogenic activity and relative gene expression (P ＜ 0.05).Overloading could also improve the condition of microgravity-induced osteoporosis,but the effect was not obvious (P ＞ 0.05).Conclusions Tail-suspension can successfully simulate microgravity environment and duplicate osteoporosis model.Physiological loading can effectively prevent the emergence and development of microgravity-induced osteoporosis,while overloading can also counter microgravity-induced osteoporosis,but the results have no significant differences.
Résumé
Objective To investigate the role and influence of physiological loading and overloading on microgravity-induced osteoporosis,so as to find a reliable way to prevent or treat related-orthopedic disorders in astronauts induced by long-time space activity.Metbods The microgravity environment in space was simulated by tail-suspension experiment,then the osteoporosis models of mice were built.A total of 32 C57BL/6J mice were randomly and evenly separated into four groups:normal group (normal),tail-suspension group (TS),physiological loading group (loading) and overloading group (overloading).Periodic dynamic mechanical load was applied on the left tibia in loading group and overloading group during tail-suspension test.After four weeks,tibial mechanical properties,micro-parameters of bone trabecular,biochemical indices and osteogenesis-related gene expression in each group were compared and analyzed.Results A great loss of tibial cancellous bone,significantly lower tibial biomechanical expression,serious damage of microstructure and weaker osteogenic activity were found in tail-suspended mice as compared with those of normal group.Physiological loading could clearly improve mechanical properties of bones,microstructure of bone trabecular,osteogenic activity and relative gene expression (P ＜ 0.05).Overloading could also improve the condition of microgravity-induced osteoporosis,but the effect was not obvious (P ＞ 0.05).Conclusions Tail-suspension can successfully simulate microgravity environment and duplicate osteoporosis model.Physiological loading can effectively prevent the emergence and development of microgravity-induced osteoporosis,while overloading can also counter microgravity-induced osteoporosis,but the results have no significant differences.
Résumé
Adipose derived stem cells (ADSC) are good candidates for the replacement of bone marrow derived mesenchymal stem cells due to their abundance, multipotency property, and easier accessibility. In order to explore the behavior of these cells in response to mechanical stimulation, in this study we have investigated the effects of uniaxial dynamic mechanical loading on ADSC's morphology. Stem cells derived from the fat tissue of human and after an overnight culture were seeded on a silicone rubber strips. Afterwards, cells were subjected to a uniaxial dynamic loading in three different groups. Cell images were evaluated considering different morphological parameters. Fractal dimension decreased significantly after loading while in control groups there were a significant increase (p<0.05), approving that cyclic strain would lead to more aligned and organized cells. Cell orientation also increased significantly (p<0.05). Moreover cells' orientation angle, 24 hour after loading does not change compared to the observations immediately after loading, which attests to the practicality of the cyclic strain in functional tissue engineering. Cell width decreased and cell length increased which led to a significant increase in cell shape index (p<0.05). Results confirmed that uniaxial dynamic loading affects cell morphological parameters comparing their values before and after loading. In addition, the number of cycles are also an important factor since different number of cycles lead to different amounts of certain morphological parameters. Conclusively, cyclic strain can be a practical method in the field of functional tissue engineering.
Sujets)
Humains , Moelle osseuse , Forme de la cellule , Fractales , Cellules souches mésenchymateuses , Méthodes , Siloxane élastomère , Cellules souches , Ingénierie tissulaireRésumé
PURPOSE: The purpose of the present study was to evaluate the effect of thermocycling and mechanical loading on the biaxial flexural strength and the phase transformation of one Ce-TZP/Al2O3 and two Y-TZP core materials. MATERIALS AND METHODS: Thirty disc-shaped specimens were obtained from each material. The specimens were randomly divided into three groups (control, thermocycled, and mechanically loaded). Thermocycling was subjected in distilled water for 10000 cycles. Mechanical loading was subjected with 200 N loads at a frequency of 2 Hz for 100000 times. The mean biaxial flexural strength and phase transformation of the specimens were tested. The Weibull modulus, characteristic strength, 10%, 5% and 1% probabilities of failure were calculated using the biaxial flexural strength data. RESULTS: The characteristic strengths of Ce-TZP/Al2O3 specimens were significantly higher in all groups compared with the other tested materials (P<.001). Statistical results of X-ray diffraction showed that thermocycling and mechanical loading did not affect the monoclinic phase content of the materials. According to Raman spectroscopy results, at the same point and the same material, mechanical loading significantly affected the phase fraction of all materials (P<.05). CONCLUSION: It was concluded that thermocycling and mechanical loading did not show negative effect on the mean biaxial strength of the tested materials.
Sujets)
Analyse spectrale Raman , Eau , Diffraction des rayons XRésumé
Objective To investigate the effect of mechanical loading with different magnitudes on the proliferation, differentiation and activity of preosteoclasts and osteoclasts. Methods One group of RAW264.7 preosteoclastic cells cultured in osteoclast inductive medium were subjected to the cyclic tensile strain for three days, and then cultured for four days; the other group of RAW264.7 cells were induced in osteoclast inductive medium for four days to be osteoclasts, then subjected to the cyclic tensile strain for three days. Results Under the tensile strain at different magnitudes, the proliferation variations in two groups of RAW264.7 cells were approximately identical, but changes in the activities of tartrate-resistant acid phosphatage (TRAP) and numbers of TRAP-positive multinucleated cells (osteoclasts) in the two groups were significantly different. Under the moderate tensile strain (2 500 με), the reduction of TRAP activity and osteoclasts number were both the highest in the first group, and both the lowest in the second group. Conclusions The influence of different tensile strain on osteoclast differentiation and osteoclastic activity of preosteoclasts in early differentiation is different to that of the preosteoclasts already differentiated into osteoclasts.
Résumé
Osteoclast is one of the basic function cells involved in bone metabolism during the process of bone remodeling.Osteoclasts are responsible for destruction and absorption of the old bone tissue.Thus,a tiny change of osteoclast apoptosis may change the process of bone remodeling.Osteoclast apoptosis is regulated by many factors including estrogen,bisphosphonates and so on.However,fewer researches on effect of mechanical loading on the biological activity of osteoclasts has been carried out.In this paper,the effect of mechanical loading on the biological activity of osteoclasts and its regulation on apoptosis of cells and osteoclast are reviewed.
Résumé
The aim of this study was to evaluate the marginal gap in terms of cement film thickness associated with shoulder, shoulder with 45° bevel, shoulder with 30° bevel and chamfer, under thermo-mechanical loading. Forty human mandibular molars were prepared and restored with ceramo-metal crowns. Teeth were thermo-mechanically loaded and vertically sectioned to evaluate the cement film thickness. Shoulder with 45° bevel provided the least marginal gap as compared with all the tested finish lines.
Sujets)
Force occlusale , Couronnes , Alliage dentaire/composition chimique , Adaptation marginale (odontologie) , Analyse du stress dentaire/instrumentation , Humains , Test de matériaux , Alliages métal céramique/composition chimique , Microscopie , Molaire/anatomie et histologie , Palladium/composition chimique , Céments résine/composition chimique , Argent/composition chimique , Contrainte mécanique , Propriétés de surface , Température , Couronne dentaire/anatomie et histologie , Préparation de dent/classification , Préparation de dent/méthodesRésumé
Mechanical loading plays an important role in stimulating osteogenesis. Increasing mechani-cal loading, via sports and mechanical vibration may increase bone mass and imluce better microstructure, where-as, lack of mechanical loading in the situation like space walking, long bed-ridden, ete, results in bone loss and osteoporosis. Although the mechanism through which mechanical loading stimulates bone formation is not clear, experiments have proved that local mechanism is more important than systematic mechanism. This article aims to review the local mechanism of mechanical loading stimulating osteogenesis.
Résumé
BACKGROUND: To examine the effects of changes in mechanical loading on endochondral bone formation, a simulated rat model of weightlessness was introduced and the changes in the growth plate were evaluated. METHODS: Unloading condition on the hindlimb of Sprague-Dawley rats was created by fixing a tail and lifting the hindlimb. Six rats aged 6 weeks old were assigned to each group of unloading and reloading with their control group. Unloading was maintained for three weeks, and then reloading was applied for another one week afterwards. Histomorphometry for the assessment of vertical length of the growth plate, 5-bromo-2'-deoxyuridin (BrdU) immunohistochemistry for cellular kinetics, and biotin nick end labeling TUNEL assay for chondrocytes in the growth plate were performed. RESULTS: The vertical length of the growth plate and the proliferative potential of chondrocytes were decreased in the unloading group than those of the control group. Inter-group differences were more significant in the proliferative and hypertrophic zones. Reloading increased the length of growth plate and proliferative potential of chondrocytes as evidenced by the increase of the ratio of positive BrdU stained cells. However, the apoptotic changes in the growth plate were not affected by the alterations of the weight bearing. CONCLUSION: Alterations in the weight bearing induced changes in the chondrocytic proliferative potential of the growth plates and had no effect on the apoptosis occurrence. This may suggest that deprived weight bearing due to various clinical situations hamper normal longitudinal bone growth. Further studies regarding the factors for reversibility of chondrocytic proliferation upon variable mechanical stresses are needed.