Optimizing endodontic treatment in primary teeth: a literature review / Otimização do tratamento endodôntico em dentes decíduos: uma revisão de literatura

Many factors influence the success and efficacy of endodontic treatment in primary teeth, such as unpredictability and the morphological complexity of the canals. Thus, the quality of the obturation materials should aim at decreasing the iatrogenic risks during pulpectomy to maintain primary teeth until their physiological exfoliation. Pulpectomy of primary teeth is challenging because longer chair-side time may negatively affect the behavioral management of the child. Considering that challenging approach, the professionals frequently search for technologies that optimize the treatment and improve root canal modeling and sanitization. To provide more comfort to the child during the treatment, recently, the advancements in permanent tooth endodontics have been employed in primary tooth pulpectomy such as apical locators, rotary instrumentation, and NiTi instruments. Therefore, this study aimed to review the use of these technologies and instruments in the endodontic treatment of primary teeth, emphasizing the relevant key factors for treatment success.

Há diversos fatores que influenciam no sucesso e na eficácia do tratamento endodôntico em Odontopediatria, destacando-se a imprevisibilidade e a complexidade morfológica dos canais. Sendo assim, existe a necessidade de uso de materiais de qualidade para diminuição dos riscos iatrogênicos durante a pulpectomia, sempre objetivando a manutenção dos dentes decíduos no arco dentário até a sua esfoliação fisiológica. Trata-se de um procedimento desafiador e demorado, que pode afetar negativamente o manejo entre o profissional e o paciente infantil. Logo, a busca constante por tecnologias que otimizem este tratamento, bem como a melhora na qualidade de modelagem e sanificação dos canais radiculares é frequente. Mais recentemente, os avanços da endodontia de dentes permanentes, estão sendo trazidos para a Odontopediatria, como o emprego dos localizadores apicais, sistemas de instrumentação mecanizados e uso de instrumentos com liga de NiTi, recursos capazes de diminuir o tempo de duração das sessões, proporcionando maior conforto para o paciente durante o atendimento. Portanto, o objetivo deste artigo é rever o uso destas tecnologias e instrumentos no preparo e tratamento dos canais radiculares de dentes decíduos, enfatizando pontos relevantes ao sucesso do atendimento, principalmente na Odontopediatria.

Pulpectomia o pulpotomía en el tratamiento de dientes temporales: Revisión

Objetivo: Comparar las terapias pulpares de dientes temporales en pacientes según la evidencia en la literatura. Metodología: Revisión bibliográfica en la literatura científica, en las siguientes bases de datos: PUBMED, MEDLINE, BVS, BBO Odontología, IBECS y Web of Science. Los descriptores seleccionados fueron: pulpotomía y pulpectomia, combinados en la siguiente estrategia de búsqueda: (pulpotomía) AND (pulpectomía). Resultados: Se encontraron 65 artículos, seleccionados por título y resumen. Después de una lectura minuciosa, solamente 23 artículos cumplieron con el criterio de inclusión que fuera un ensayo clínico, estudio longitudinal (cuasiexperimental o cohorte), no se excluyeron artículos duplicados y 13 que no tenían relación directa con el tema. La muestra final totalizó 7 artículos para la revisión integradora. La evidencia es limitada por el número de estudios que cumplieron con los criterios. Conclusiones: La contribución de este estudio sobre el tema es aumentar el conocimiento con respecto a las terapias pulpares; contribución que requiere ser mejorada o detallada en estudios posteriores; por tal motivo no se puede hacer una conclusión definitiva respecto a cuál de los tratamientos pulpares es mejor, pero nos indica una tendencia para desde el punto de vista clínico poder considerar los tratamientos pulpares como una alternativa adecuada para mantener el diente temporal en la cavidad bucal con evidencia científica.

Objective: To compare pulp therapy of primary teeth in patients according to the evidence in the literature. Methodology: Literature review in the scientific literature, in the following databases: PUBMED, MEDLINE, BVS, BBO Dentistry, IBECS and Web of Science. The descriptors selected were: pulpotomy and pulpectomy, combined in the following search strategy: (pulpotomy) AND (pulpectomy). Results: 65 articles were found by selecting by title and abstract. After a thorough reading only 23 articles met the inclusion criteria of being a clinical trial, longitudinal study (quasi-experimental or cohort), duplicate articles and 13 that were not directly related to the topic were not excluded. The final sample totaled 7 articles for the integrative review. The evidence is limited by the number of studies that met the criteria. Conclusions: The contribution made on the subject is to increase knowledge regarding pulp therapies, which needs to be improved or detailed in further studies, for that reason we cannot make a definitive conclusion on which of both pulp treatments is better, but it gives us a tendency and from a clinical point view to be able to consider pulp treatments as an adequate alternative to maintain the primary tooth in the oral cavity with scientific evidence.

Biocompatibilidade em pulpotomia de dentes decíduos: melhor material e alternativas ao uso do MTA: revisão sistemática e meta-análise / Biocompatibility in pulpotomy in deciduous teeth: best material and alternatives to MTA use: a systematic review and meta-analysis

Introdução: A terapia pulpar vital é o tratamento que visa a manutenção da vitalidade pulpar e da função do dente. Para a pulpotomia, os materiais são escolhidos baseados em algumas características fundamentais, tais como a biocompatibilidade e bioatividade. Atualmente, o Agregado de Trióxido Mineral (MTA) é o mais comumente utilizado para este procedimento. Objetivo: Identificar o melhor material para uso em pulpotomia em dentes decíduos considerando a propriedade de biocompatibilidade, através de revisão sistemática da literatura e metanálise. Material e Métodos: A pergunta norteadora foi: "Qual é o melhor agente para pulpotomia em termos de biocompatibilidade?". Foi realizada pesquisa nas bases de dados eletrônicas Medline/PubMed, SciELO, LILACS e Web of Science sem restrição de data inicial até outubro de 2020, usando os seguintes descritores padronizados pelo Medical Subject Headings (MeSH): "pulpotomy", "pulp therapy", "biomaterials", "biocompatible materials", "pulp capping agent", "pulp capping materials".Resultados: Um total de 358 estudos foram identificados, sendo 15 deles selecionados para análise qualitativa e seis para metanálise. A revisão avaliou aspectos clínicos, radiográficos e histológicos, considerando diferentes períodos de acompanhamento, amostras e metodologias. Diversos materiais foram encontrados e o MTA foi o mais frequente. Embora os resultados qualitativos tenham sido pouco conclusivos em relação ao melhor deles, foi possível estabelecer que o Cimento Portland é uma alternativa viável para a substituição do MTA. Conclusão: A metanálise demonstrou que o MTA é o material mais favorável para uso em pulpotomias em dentes decíduos.

Introduction: Vital pulp therapy is the treatment aimed at maintaining pulp vitality and tooth function. For pulpotomy, materials are chosen based on some fundamental characteristics, such as biocompatibility and bioactivity. Currently, Mineral Trioxide Aggregate (MTA) is the most commonly used for this procedure. Objective: To identify the best material for use in pulpotomy in deciduous teeth considering the property of biocompatibility, through a systematic review of the literature and meta-analysis. Materials and Methods: The guiding question was: "What is the best agent for pulpotomy considering the biocompatibility property?". A search was performed in the electronic databases MEDLINE/PubMed, SciELO, LILACS and Web of Science without an initial date until October 2020, using the following descriptors recognized by Medical Subject Headings (MeSH): "pulpotomy", "pulp therapy", "biomaterials", "biocompatible materials'', "pulp capping agent", "pulp capping materials". Results: A total of 358 studies were identified, 15 of them selected to qualitative analysis and six to meta-analysis. The revision evaluated clinical, radiographic and histological aspects, considering different follow-up periods, samples and methodologies. Several materials were found and MTA was the most frequent. Although the qualitative results were inconclusive in relation to the best of them, it was possible to establish that the Portland Cement is a viable alternative for MTA replacement. Conclusion: The meta-analysis demonstrated that MTA is the most favorable material for use in pulpotomies in deciduous teeth.

Pulpectomies with Iodoform Versus Calcium Hydroxide-Based Paste: A Preliminary Randomised Controlled Clinical Trial

ABSTRACT Objective: To compare clinical and radiographical pulpectomy outcomes in primary teeth filled with different pastes. Material and Methods: The sample included thirty-eight teeth indicated for pulpectomy due to irreversible pulp inflammation or necrosis from thirty patients (2 to 9 years old). The first appointment comprised chemomechanical preparation (2.5% sodium hypochlorite), smear layer removal (6% citric acid), intracanal dressing and temporary restoration. Seven days later, teeth were randomly assigned to filling with iodoform (IP) or calcium hydroxide with zinc oxide (CHZO) based pastes and temporarily restored. Final restoration (composite resin) occurred at the 3rd appointment. Data from baseline, 6 and 12 months were analysed using descriptive and inferential statistics (p≤0.05). Results: The overall frequency of success was 63.6% (n=21), with no significant difference between groups (IP=62.5% n=10; CHZO=64.7% n=11, p=0.59). Multiradicular teeth, overfilled canals and teeth whose coronal restoration have been lost were significantly associated with failure (p=0.01, p=0.04 and p<0.001, respectively). Conclusion: After 12 months, both pastes showed similar outcomes and can be used as good options for pulpectomies in primary teeth. Moreover, tooth location, extent of the root canal filling, and integrity of final restoration during the follow-up influenced the outcome of pulpectomies.

Pulpectomía mecanizada en molares primarios: caso clínico / Mechanized pulpectomy in primary molars: a clinical case

Las pulpectomías en molares primarios están indica-das en casos de diagnóstico de pulpitis irreversible o necrosis y reabsorción radicular mínima o nula. Son tratamientos laboriosos y extensos, que sólo pueden ser llevados a cabo en pacientes colaboradores. En búsqueda de simplificar esta terapéutica y mejorar su eficacia, se propone la mecanización de la pre-paración de los conductos de molares primarios. Diversos autores aseguran que esta técnica opti-miza el tiempo clínico y mejora la calidad del trata-miento, obteniendo gran aceptación en la literatura actual. Se presenta la secuencia de procedimientos, resolución y controles de dos tratamientos de pul-pectomía con instrumentación mecanizada en mola-res primarios (AU)

Pulpectomies in primary molars are indicated in cases of irreversible pulpitis or necrosis with mini-mal or no root resorption. They are laborious and ex-tensive treatments, which only can be carried out in cooperative patients. In order to simplify this therapy and improve its effectiveness, the mechanization of root canal preparation is proposed. Several authors assume that this technique optimizes preparation time and improves the quality of treatment, obtaining great acceptance in the current literature. We report the sequence of procedures, resolution, and controls of two pulpectomies with mechanized instrumenta-tion in primary molars (AU)

Comparison of obturation quality, instrumentation time and post-operative pain using manual K-files and pediatric rotary files in primary molars ­ a double blinded randomised clinical trial / Comparação da qualidade de obturação, tempo de instrumentação e dor pós-operatória usando Limas manuais K e Limas rotativas pediátricas em molares decíduos ­ um estudo clínico randomizado duplo-cego

Objective: to compare the quality of obturation, instrumentation time and post-operative pain after pulpectomy in primary molars using manual K-files, Kedo-S and Kedo-S Square rotary file systems. Material and Methods: a double blinded randomized control trial was conducted in 45 children, who were indicated for pulpectomy in any one of the primary mandibular molars. The canal preparation was done using either hand K-files, Kedo-S files, or Kedo-S Square files based on the groups assigned. The time taken for instrumentation was recorded using a stopwatch. The quality of obturation was evaluated using post-operative radiograph and post-operative pain was assessed with modified Wong-Baker Faces Pain scale. Results: instrumentation time was minimum in rotary Kedo-S Square files (53.23 ± 9.60 seconds) followed by Kedo-S files (82.70 ± 11.86 seconds). The preparation time was maximum with manual K-files (121.43 ± 20.18 seconds). Kedo-S square files provided a higher number of optimally filled canals (66.4%). All the three instrumentations equally showed the tendency to produce voids in the obturation. Rotary files Kedo-S Square followed by Kedo-S showed less post-operative pain compared to K-files. Conclusion: the use of pediatric rotary instruments for canal preparation during pulpectomy will result in better quality of obturation in reduced time with least post-operative pain (AU)

Objetivo: comparar a qualidade de obturação, tempo de instrumentação e dor pós-operatória após pulpectomia em molares decíduos usando limas manuais K, limas rotatórias Kedo-S e limas rotatórias Kedo-S Square. Material e Métodos: um estudo clínico randomizado duplo-cego foi conduzido com 45 crianças que foram submetidas à pulpectomia de algum molar decíduo indicado. A preparação do canal foi feita usando limas manuais K, ou limas Kedo-S, ou ainda Limas Kedo-S Square, com base nos grupos que foram selecionados. O tempo para a instrumentação foi registrado com um cronômetro. A qualidade de obturação foi avaliada por meio de uma radiografia após o procedimento e a dor pós-operatória foi avaliada com a escala de dor Wong-Baker Faces modificada. Resultados: o tempo de instrumentação foi mínimo para as limas rotatórias Kedo-S Square (53,23 ± 9,60 segundos) seguido pelas limas Kedo-S (82,70 ± 11,86 segundos). O tempo de preparação foi maior com as limas manuais K (121,43 ± 20,18 segundos). As limas Kedo-S Square promoveram um maior número de canais otimamente obturados (66,4%). Todas as três instrumentações mostraram igualmente a tendência em seproduzir vazios na obturação. As limas rotatórias Kedo-S Square seguidas pelas limas Kedo-S produziram menos dor pós-operatória comparadas às limas manuais K. Conclusão: o uso de instrumentos rotatórios pediátricos para a preparação do canal durante a pulpectomia resultará em melhor qualidade de obturação em tempo reduzido e com menos dor pós-operatória. (AU)

Uso de la pasta CDZ en dientes temporarios necrosados con una técnica mínimamente invasiva / Use of CDZ paste in necrotic primary teeth with a minimally invasive technique

Introducción: El tratamiento de los canales radiculares de molares temporales con pulpas infectadas ha sido ampliamente descrito y motivo de discusión por muchos años, no existiendo aún un consenso en cuanto al material de obturación. La pasta CTZ (cloranfenicol, tetraciclina y óxido de zinc más eugenol) acompañada de la Técnica de Endodoncia No Instrumentada ha mostrado una alta efectividad clínica y radiográfica para el tratamiento de molares temporales con compromiso pulpar. Se ha propuesto el reemplazo del componente Tetraciclina por Doxiciclina de la formulación, por las implicancias de un posible amelo-génesis imperfecta y la coloración en la corona de dicho componente. Objetivo. Evaluar la efectividad clínica de la pasta CDZ en el tratamiento endodóntico de dientes primarios necrosados con una técnica mínimamente invasiva. Metodología. Estudio de intervención en el que se incluyeron pacientes que presentaban dientes temporales con indicación de terapia pulpar y en quienes se utilizó la pasta CDZ. El éxito del tratamiento se midió por la desaparición de la sintomatología. Resultados. Se incluyeron en el estudio 76 pacientes entre 2 a 9 años. La eficacia del tratamiento con CDZ fue del 97,6% en 125 dientes. Conclusiones. Los hallazgos son comparables a los estudios que utilizaron el CTZ. Debido a las características biológicas del material, su bajo costo, fácil manipulación y excelentes resultados clínicos, se considera una opción en la terapia pulpar en dientes temporales, como una alternativa en el uso de programas de salud pública.

Introduction: Treatment of root canals of primary molars with infected pulps has been widely described and has been the subject of discussion for many years, and there is still no consensus regarding the filling material. The CTZ paste (chloramphenicol, tetracycline and zinc oxide plus eugenol) accompanied by the Non-Instrumented Endodontic Technique has shown high clinical and radiographic effectiveness for the treatment of primary molars with pulp involvement. The replacement of the Tetracycline component by Doxycycline of the formulation has been proposed, due to the implications of a possible amelogenesis imperfecta and the coloration in the crown of said component. Goal. To evaluate the clinical effectiveness of CDZ paste in the endodontic treatment of necrotic primary teeth with a minimally invasive technique. Methodology: Intervention study in which patients with temporary teeth with an indication for pulp therapy and in whom CDZ paste was used were included. Treatment success was measured by the disappearance of symptoms. Results. 76 patients between 2 and 9 years old were included in the study. The efficacy of CDZ treatment was 97.6% in 125 teeth. Conclusions: The findings are comparable to studies using CTZ. Due to the biological characteristics of the material, its low cost, easy handling and excellent clinical results, it is considered an option in pulp therapy in primary teeth, as an alternative in the use of public health programs.

Is clindamycin-modified triple antibiotic paste better than iodoform-based medicament for the treatment of non-vital primary molars using LSTR technique – A randomised clinical trial

Objectives: The objectives of this study were to evaluate and compare the success rate of local application of iodoform-based obturating material (Pulpotec – [Produits Dentaires S.A., Switzerland]) and clindamycinmodified triple antibiotic paste (ClinM-TAP) in pulp chamber using minimally invasive endodontic treatment of carious primary molars indicated for pulpectomy, for 12 months, using clinical and radiographic parameters. Materials and Methods: A randomised clinical trial was conducted in 60 children in the age group of 3–8 years reporting carious primary molars with symptoms of irreversible pulpitis and pulpal involvement clinically, allocated into Group 1 (30) and Group 2 (30). In Group 1, Lesion sterilisation and tissue repair (LSTR) was done using Pulpotec (Produits Dentaires S.A., Switzerland) as medicament and in Group 2, ClinM-TAP (Clindamycinmodified triple antibiotic paste) was used as medicament. Clinical follow-up was done at 3, 6 and 12 months; radiographic follow-up was done at 6 and 12 months. Clinical parameters compared were tenderness on percussion, spontaneous pain, intraoral swelling and sinus/fistula. Radiographic comparison was done based on furcation radiolucency, root resorption and bone regeneration. Both intergroup and intragroup statistical analysis was done using Chi-square test or Fisher exact test, Cochran’s Q Test and Mann–Whitney U-Test for the test of significance. All the statistical tests were performed at 5% significance level. Results: The mean age of patients in the study was 5.25 ± 1.3years with 45% males and 55% females. Both groups showed significant improvement in terms of clinical symptoms from baseline to 12 months. On intergroup comparison clinical parameters, TOP was present in 11.2% and 44% of cases at the end of 12 months in Groups 1 and 2, respectively (P < 0 0.05). On intergroup comparison of radiographic parameters, at the end of 12 months, furcation radiolucency was seen in 32% and 73% (P < 0.05) and root resorption was seen in 16% and 30% cases in Group 1 and 2, respectively (P > 0.05). Overall clinical success rate of Group 1 and Group 2 was 88% and 50%, respectively (P < 0.05) and radiographic success rate was 60% and 27%, respectively (P < 0.05). Conclusion: LSTR using Pulpotec as a medicament has shown promising results in the present study. It could be a better alternative to conventional endodontic treatment in primary teeth. In the present study, ClinM-TAP has shown poor radiographic success; hence, it should be used with caution.

Comparative evaluation of intracanal cryotherapy and curcumin as a final irrigant in reducing post endodontic pain in primary teeth

Aim: The aim of this study was to evaluate the intracanal effectiveness of cryotherapy, curcumin irrigant, and normal saline as a final irrigant in reducing postendodontic pain in primary teeth. Materials and Methods: A total of 120 teeth between the ages of 4 and 7 years requiring pulpectomy in primary teeth were included in the study. The teeth were randomly assigned to one of the three treatment groups: intracanal cryotherapy using 2.5°C cold saline, curcumin irrigant, or normal saline. Following completion of chemomechanical preparation, final irrigation with 2.5°C cold saline, curcumin irrigant, and normal saline solution at room temperature were employed in the groups. Participants were asked to rate the severity of their postoperative pain on the Visual Analog Scale before, immediate postoperative after wearing of local anesthetic effect, and 24 h after the procedure. The results were analyzed statistically. Results: The differences in reduction of postendodontic pain between the three irrigating regimens were statistically not significant. Cryotherapy utilizing 2.5°C cold saline or curcumin irrigant can be used instead of normal saline as a final irrigant in pulpectomy of primary teeth. Conclusions: Cryotherapy can be a straightforward, cost-effective, and nontoxic treatment option for the management of postendodontic pain. Curcumin irrigant with its anti-inflammatory properties is also a better alternative as a final irrigant for reducing postoperative pain in primary teeth.

Credibility of YouTube™ videos on root canal treatment in children

Background: A lot of videos on root canal treatment in children are available on YouTube™ but no quality checks are present. Addressing this is critical so that parents and dentists know why root canal in children is important including the explanation of procedural steps regarding treatment undertaken. Aim: The aim of this study is to analyze and grade YouTube™ videos on root canal treatment in children and assess whether it provides beneficial information for patients and dentists. Materials and Methods: Variables such as number of views, duration (minute), days since upload, number of comments, number of likes, number of dislikes, interaction index, and viewing rate were tabulated for selected 57 videos. Statistical Analysis: Selected videos were statistically analyzed using a 15-point scoring system and evaluated using SPSS software. Finally, the obtained data sets were classified as low-, moderate-, and high-content videos. Fisher's exact test was used to compare between proportions. Results: Based on the tabulated variables, most of the videos were low (n = 31) and moderate content (n = 24), which dentists mostly uploaded. There was no statistical significance between the video types and content score groups (P > 0.05). The most frequently mentioned issues were procedure (84.21%), obturating materials (75.44%), and etiology (63.16%). The least mentioned subjects were indications (24.56%) and importance (22.81%). Conclusion: From this study, YouTube™ videos on root canal treatment in children were of low and moderate quality. Hence, high-quality videos are essential for providing awareness among patients and dentists.

Frecuencia de tratamientos pulpares en una población pediátrica peruana: un estudio retrospectivo en un centro dental especializado de 2015 a 2019 / Frequency of Pulp Treatments in a Peruvian Pediatric Population: a Retrospective Study in a Specialized Dental Center from 2015 to 2019

Resumen Los tratamientos pulpares constituyen uno de los tipos de procedimientos más realizados en pacientes pediátricos, cuyo objetivo primordial es devolver la función masticatoria, estética y fonética. El objetivo del presente estudio fue determinar la frecuencia de los tratamientos pulpares realizados en pacientes de 3 a 11 años de edad atendidos en el Servicio de Odontopediatría del Centro Dental Docente Cayetano Heredia desde enero de 2015 hasta diciembre de 2019. Se realizó la búsqueda de las historias clínicas de pacientes atendidos en el Servicio de Odontopediatría que hayan contado con los criterios de inclusión y exclusión. Se recogieron datos sobre edad, sexo, tipo de dentición y pieza dentaria, para la elaboración de una base de datos, y posteriormente tablas de contenido. De una muestra de 514 historias clínicas virtuales, con 1166 tratamientos pulpares realizados, el tratamiento pulpar indirecto fue el más realizado para ambos sexos, 41.17% (n=247) para el sexo femenino y 34.98% (n=198) para el sexo masculino. Según rango de edad, 3 a 5 años de edad son los pacientes que más tratamiento pulpar indirecto se realizaron con 39.06% (n=359). La mayoría de pacientes que presentaban dentición decidua se les realizaron el tratamiento de tratamiento pulpar indirecto con 39.32% (n=326). Siendo la pieza dental mayormente tratada con tratamiento pulpar indirecto la 84 con 41.18 % (n=70). El tratamiento pulpar que más se realizó dentro de nuestro estudio fue el tratamiento pulpar indirecto seguido de la pulpectomía y pulpotomía. El sexo femenino, grupo etario de 3 a 5 años y dentición decidua fueron los que más recibieron tratamientos pulpares. Los dientes con mayor frecuencia de tratamientos pulpares fueron la segunda molar inferior izquierda y la primera molar inferior derecha, y las que de menor frecuencia fueron las caninos inferiores derecho e izquierdo.

Abstract Pulp treatments are one of the types of procedures most performed in pediatric patients, whose primary objective is to restore the masticatory, aesthetic and phonetic function. The objective of this study was to determine the frequency of pulp treatments performed in patients from 3 to 11 years of age treated at the Pediatric Dentistry Service of the Centro Dental Docente Cayetano Heredia from January 2015 to December 2019. The search for the medical records of patients treated at the Pediatric Dentistry Service who have met the inclusion and exclusion criteria. Data were collected on age, sex, type of dentition and tooth, for the elaboration of a database, and later tables of contents. Of a sample of 514 virtual medical records, with 1166 pulp treatments performed, indirect pulp treatment was the most performed for both sexes, 41.17% (n=247) for females and 34.98% (n=198) for males. According to age range, 3 to 5 years of age are the patients who received more indirect pulp treatment with 39.06% (n=359). The majority of patients with deciduous dentition underwent indirect pulp treatment with 39.32% (n=326). Being the tooth most treated with indirect pulp treatment 84 with 41.18% (n=70). The pulp treatment that was most performed in our study was indirect pulp treatment followed by pulpectomy and pulpotomy. The female sex, age group 3 to 5 years and deciduous dentition were the ones that received the most pulp treatments. The teeth with the highest frequency of pulp treatments were the second lower left molar and the first lower right molar, and those with the least frequency were the lower right and left canines.

Concordância entre medida de comprimento de trabalho por radiografia e localizador eletrônico foraminal na dentição decídua: revisão integrativa / Agreement between work length measurement by radiography and electronic foraminal locator in the primary dentition: an integrative review

Introdução: O estabelecimento do comprimento de trabalho (CT) é uma etapa fundamental para o sucesso do tratamento endodôntico, principalmente na dentição decídua. O exame radiográfico é um dos principais meios de definir o CT. A mensuração desse comprimento também pode ser obtida por meio de dispositivos eletrônicos. Objetivo: Revisar a literatura acerca da concordância entre a medida de CT por radiografia e localizadores eletrônicos foraminais (LEFs) na dentição decídua. Metodologia: A busca bibliográfica foi realizada nas bases de dados PubMed, Cochrane Library e BVS, seguindo uma estratégia de combinação de palavras-chave, filtrando apenas pesquisas clínicas. A seleção dos artigos foi realizada em duas etapas: através da leitura dos títulos e resumos e, em seguida, por meio da obtenção e leitura dos artigos completos selecionados. Resultados: sete artigos foram selecionados, publicados entre 2011 e 2020. Todos foram analisados quanto à qualidade metodológica e à caracterização como tamanho da amostra, objetivo, metodologia, resultados e conclusão. Todos possuíam os dados necessários para contemplar o objetivo desta pesquisa. O uso dos LEFs mostrou-se tão preciso quanto o método radiográfico (n=6), e, em um estudo, o método eletrônico foi superior ao radiográfico para determinação do CT. Conclusão: O método eletrônico possui eficácia na determinação do CT durante o tratamento endodôntico de dentes decíduos sendo comparável ao radiográfico.

Introduction: To establish the working length (CT) is a fundamental step toward the suc-cess of endodontic treatment. Also, the radiographic examination is one of the most important means of determining CT. This length can also be measured by electronic devic-es. Objective: To review the literature on the agreement between the CT measurement by radiography and electronic foraminal locators (LEF) in the primary dentition. Methodology: A bibliographic search was performed on PubMed, Cochrane Library, and BVS, using a keyword combination strategy and filtering only clinical research. The selection of the articles occurred in two stages: by reading the titles and abstracts, and by obtaining and reading the selected full articles. Results: Seven articles, published between 2011 and 2020, were selected and analyzed for methodological quality and characterized for sample size, objectives, methodology, results, and conclusion. They had the essential data to contemplate the purpose of this research. The use of LEF proved to be as accurate as of the radiographic method (n=6), and in one study, the electronic method was superior to the radiographic method for determining TC. Conclusion: The electronic method is effective in determining the CT during the endodontic treatment of primary teeth and is comparable to the radiographic one.

Lesion sterilization and tissue repair of primary molar to the eruption of its permanent successor: a case report / Esterilização da lesão e reparação de tecidos de molar decíduo: relato de caso clínico até a erupção do permanente sucessor

The aim of this study is to report a clinical case of lesion sterilization and tissue repair in primary molar, with follow-up until the eruption of the permanent successor. A 6-year-old male patient came to the Pediatric Dentistry Clinic at Faculdade Sao Leopoldo Mandic in Campinas-SP, with his mother, complaining of "caries in several teeth". On clinical examination, it was found that tooth 85 had a severe carious lesion with pulp involvement and fistula. Radiographically, radiolucency was observed in the furcation region. It was then decided to perform lesion sterilization and tissue repair of the tooth with CTZ paste. After 6 months of the procedure, the tooth was clinically and radiographically normal and after 3 years it was observed that tooth 85 was in complete root resorption. After extraction, the permanent successor erupted naturally without clinical or radiographic alterations. It can be concluded that the present clinical case demonstrated success in the use of CTZ paste in the lesion sterilization and tissue repair of primary molars, until the complete eruption of the permanent successor. (AU)

O objetivo desse estudo é relatar o caso clínico de esterilização da lesão e reparação de tecidos em molar decíduo com pasta CTZ, com acompanhamento até a erupção do pré-molar sucessor. Paciente do sexo masculino, 6 anos de idade, apresentou-se à Clínica de Odontopediatria da Faculdade São Leopoldo Mandic em Campinas-SP, acompanhado de sua mãe, queixando-se de "cárie em vários dentes". Ao exame clínico, verificou-se que o dente 85 apresentava lesão de cárie severa com envolvimento pulpar e fístula. Radiograficamente, observou-se radiolucidez na região de furca. Optou-se, então, por realizar a esterilização da lesão e reparação de tecidos do dente com pasta CTZ. Após 6 meses da realização do procedimento, o dente apresentava-se clinica e radiograficamente normal e após 3 anos observou-se que o elemento 85 estava em rizólise completa. Feita a extração, o permanente sucessor erupcionou naturalmente sem alterações clínicas ou radiográficas. Pode-se concluir que o presente caso clínico demonstrou sucesso do emprego da pasta CTZ na esterilização da lesão e reparação de tecidos de molar decíduo, até completa erupção do permanente sucessor. (AU)

Evaluation of temporary cement to prevent bacterial contamination of the root canal after pulpectomy / Avaliação da capacidade do cemento temporário prevenir a contaminação bacteriana do canal após pulpectomia

ABSTRACT To evaluate the ability of temporary cement (TC) and gutta-percha sticks (GP) to prevent bacterial contamination of the root canal through the coronal seal after pulpectomy. Eighty artificial primary maxillary central incisors were selected and randomly divided into 2 groups: TC (n = 40) and GP (n = 40). Endodontic access, rotary instrumentation, root canal filling, and coronal sealing were performed according to group allocation. The root canal opening was seeded with S. mutans and E. faecalis. Both groups were subdivided into 5 experimental time points (24, 48, 72, 96, and 120 hours), with 8 specimens per time-point group: 5 in which both root canal filling and coronal sealing were performed (with either TC or GP) and 3 controls (coronal sealing alone, without root canal filling). All specimens were incubated in an anaerobic jar at 37°C, and bacterial contamination was assessed in a spectrophotometer. ANOVA (t-test) was used to compare contamination and the Kruskal-Wallis test to compare filling scores between the experimental groups. A significant difference was observed in sealing in the first 24 hours between GP and controls (p = 0.046). There was no significant difference in the filling pattern between canals sealed with TC versus GP. Specimens sealed with GP showed less contamination than controls in the first 24 hours. At later time points, neither GP nor TC were effective at controlling bacterial contamination; both failed to provide adequate coronal sealing.

RESUMO Avaliar a capacidade do obturador provisório (OP) e da gutapercha em bastão (GP) de prevenir a contaminação bacteriana dos condutos radiculares. Foram selecionados 80 incisivos centrais superiores decíduos artificiais que foram divididos aleatoriamente em 2 grupos: OP (n = 40) e GP (n = 40). Foi realizado acesso endodôntico, instrumentação rotatória, preenchimento do canal radicular e selamento coronário conforme os grupos. Foi feita a semeadura de S.mutans e E. faecalis na entrada do canal radicular. Ambos os grupos foram subdivididos em 5 tempos experimentais (24, 48, 72, 96 e 120 horas), com 8 espécimes por tempo experimental: 5 submetidos a preenchimento do canal radicular e selamento coronário (com OP ou GP) e 3 controles (apenas selamento coronário, sem preenchimento do canal). Todos os espécimes foram incubados em jarras de anaerobiose a 37°C e a contaminação bacteriana foi avaliada em espectrofotômetro. Utilizou-se ANOVA (teste t) para a comparação da contaminação e o teste de Kruskal-Wallis para a comparação dos escores da obturação entre os grupos experimentais. Foi observada diferença significativa no selamento nas primeiras 24 horas entre GP e controles (p = 0,046). Não houve diferença estatisticamente significativa no padrão de preenchimento entre os canais selados com OP versus GP. Os espécimes selados com GP apresentaram menor contaminação do que os controles nas primeiras 24 horas. Nos demais tempos experimentais, tanto GP quanto OP não foram eficientes no controle da contaminação bacteriana; ambos apresentaram falha no selamento coronário.

Experimental resin-based dual-cured calcium aluminate and calcium titanate materials for vital pulp therapy

Abstract: This paper evaluates the physicochemical and biological properties of experimental resin-based dual-cured calcium aluminate (CA) and calcium titanate (CTi) materials for vital pulp therapy (VPT). The experimental dual-cured materials were obtained as two pastes: a) Bis-EMA 10, PEG 400, DHEPT, EDAB, camphorquinone, and butylated hydroxytoluene; and b) fluoride ytterbium, Bis-EMA 10, Bis-EMA 30, benzoyl peroxide, and butylated hydroxytoluene. The materials were divided into six groups based on the added calcium component: MTA (MTA®, Angelus); CLQ (Clinker-Fillapex®, Angelus); CA (calcined at ,1200°C in pastes a and b); CA800 (calcined at 800°C in paste a); CA1200 (calcined at 1,200°C in paste a); and CTi (paste a). The real-time degree of conversion and rate of polymerization (n = 3), diametral tensile strength (n = 10), hydrogen potential (n = 15), calcium ion release (n = 10), water sorption and solubility (n = 10), and cell viability (n = 6) were evaluated. One- and two-way ANOVA and Tukey's post hoc test were used in the analysis of the parametric data, and Kruskal-Wallis and Dunn's multiple tests were used to analyze the nonparametric data (α = 0.05). CLQ, CA800 and CA1200 had the highest diametral tensile strength. The water solubility of MTA was similar to that of CA800, CA1200 and CTi. CA800 and CA1200 resulted in cell viabilities similar to those of MTA and CLQ. The experimental dual-cured CA-based material that calcined at 800°C showed physicochemical and biological properties suitable for VPT, and similar to those of MTA.

Comparison between the rotary (Hyflex EDM®) and manual (k-file) technique for instrumentation of primary molars: a 12-month randomized clinical follow-up study

Abstract Rotational instrumentation is an alternative for the clinical practice of pediatric dentists. However, there are few records in the literature on the clinical and radiographic aspects of treated teeth over time. Objectives: Compare instrumentation time and filling quality between manual (k-file) and rotary (Hyflex EDM®) files, and clinically and radiographically follow-up the treated teeth for 12 months. Moreover, the characteristics of glass ionomer restorations and their interference in the treatment prognosis over time were evaluated. Methodology: In total, 40 children with pulp involvement in primary molars received treatment with Hyflex EDM® or manual rotary files, performed by an operator. Clinical and radiographic aspects were observed at different times to determine the effectiveness of each technique. Results: The rotary system reduced instrumentation time when compared to the use of manual files (p≤0.05), but there was no difference in filling quality between the groups (p≥0.05). Moreover, both types of instrumentation were effective for 12 months (p≥0.05), and restoration retention influenced the emergence of periapical lesions (p≤0.05). Conclusion: Although rotary files reduce clinical time, the clinical and radiographic aspects of both techniques were similar over 12 months. Moreover, restoration retention has been shown to be related to treatment prognosis.

Influence of the method for determining working length on the obturation level of primary molars

Abstract Efficient working length determination is essential for a successful endodontic treatment. The purpose of the present study was to evaluate whether the method for determining the working length of root canals (radiographic or electronic) influences the obturation level of primary molars. Thus, a controlled, triple-blind, randomized clinical trial was conducted. Sixty-four children aged 6 to 9 years with an indication for primary molar pulpectomy were included. Participants were divided into two groups according to the method used to determine the working length of the root canals: (G1) radiographic and (G2) using an electronic apex locator. The study had 3 operators: #1 performed the clinical procedures, except the electronic measurement; #2 performed radiographic measurement and final evaluation of obturation level; and #3 performed eligibility criteria and electronic measurement. Adequacy of obturation level was evaluated based on the final conventional radiography and it was recorded as acceptable or unacceptable (short or overfilled). Data were analyzed with repeated measures logistic regression. There was no difference between the obturation level of primary molars measured by radiographic and electronic methods (p > 0.05). The other investigated variables (age, tooth type, dental arch position, last instrumentation file, and canal location) also did not influence the obturation level (p > 0.05). In conclusion, both measurement methods resulted in similar adequacy of obturation level in primary molars after pulpectomy.

Comparação de diferentes técnicas e pastas obturadoras em pulpectomias de dentes decíduos bovinos: estudo in vitro / Comparison of different techniques and obtaining paste in bovine decidual teeth pulpectomies: in vitro study

A manutenção dos dentes decíduos na cavidade bucal até o período de sua esfoliação fisiológica é de extrema importância. A terapia endodôntica é um tratamento indicado quando a saúde do tecido pulpar é comprometida e diversas técnicas e materiais podem ser empregados para realizar a obturação de canais radiculares. O objetivo deste estudo in vitro foi comparar a qualidade do preenchimento dos canais radiculares utilizando diferentes técnicas de obturação e pastas obturadoras em dentes decíduos bovinos submetidos à pulpectomia. Foram selecionados 30 incisivos decíduos bovinos, e preparados através da técnica manual com posterior obturação dos canais radiculares por meio de duas técnicas e três pastas obturadoras. Os dentes foram divididos em 6 grupos (n= 5/ grupo) da seguinte forma: GI ­ Técnica manual e pasta de Hidróxido de Cálcio PA espessada com Óxido de Zinco; GII ­ Técnica manual e pasta Guedes-Pinto Modificada; GIII ­ Técnica manual e pasta Feapex®; GIV ­ Técnica com auxílio da lentulo e pasta de Hidróxido de Cálcio PA espessada com Óxido de Zinco; GV ­ Técnica com auxílio da lentulo e pasta Guedes-Pinto Modificada; GVI ­ Técnica com auxílio da lentulo e pasta Feapex®. Foram realizadas as radiografias digitais para verificar a qualidade do preenchimento dos canais radiculares. Os resultados obtidos apresentaram diferenças significativas na qualidade do preenchimento dos canais radiculares entre os grupos de dentes decíduos bovinos obturados. Considerando os resultados obtidos e a metodologia empregada, pode-se concluir que existe diferença entre as técnicas de obturação e pastas obturadoras(AU)

Maintaining primary teeth in the oral cavity until the period of their physiological exfoliation is extremely important. An endodontic therapy is a treatment indicated when the health of the pulp tissue is compromised and several techniques and materials can be used to perform root canal filling. The aim of this in vitro study was to compare the quality of root canal filling using different filling techniques and filling masses in primary bovine teeth implanted under pulpectomy. Thirty bovine primary incisors were selected and prepared using the manual technique with subsequente filling of the root canals using two techniques and three filling materials. The teeth were divided into 6 groups (n= 5 / group) as follows: GI - Technical Manual and Calcium Hydroxide Mass PA thickened with Zinc Oxide; GII - Manual technique and modified Guedes-Pinto pasta; GIII - Manual technique and Feapex® paste; GIV - Technique with the aid of lentulo and mass of Calcium Hydroxide PA thickened with Zinc Oxide; GV ­ Technique with the aid of lentulo and modified Guedes-Pinto mass; GVI - Technique with the aid of lentulo and Feapex® mass. Digital radiographs were taken to check the quality of the filling of the root canals. The resulting results dissipated in the quality of filling the root canals between the groups of primary bovine teeth filled. Know the results obtained and the methodology used, it can be concluded that there is a difference between filling techniques and filling masses(AU)

Clinical Management of Intra-Pulp Canal Broken Endodontic Files in Primary Teeth: Literature Review / Manejo clínico de las limas endodónticas fracturadas dentro del conducto pulpar en dientes primarios: Revisión de la literatura

ABSTRACT: Fracture of an endodontic file inside a primary root canal is a rare but critical complication during the pulpectomy treatment, because the mechanical obstruction impedes the optimal cleaning and obturation of the pulp canal, compromising seriously the clinical outcome. This accidental event is mainly associated with over-use and excessive torque of intracanal files. Most clinicians opt to proceed with the extraction of the affected tooth followed by a space maintainer placement. Other practitioners attempt the non-surgical retrieval of the separated fragment through available proven techniques in permanent teeth; however, these methods may involve significant damage to the tooth and surround tissues. On the other hand, preservation of the metallic fragment might affect the treatment prognosis and interfere with the physiological root resorption.

RESUMEN: La fractura de una lima endodóntica dentro de un conducto radicular primario es una complicación rara aunque critica durante el tratamiento de pulpectomía, debido a que la obstrucción mecánica impide la limpieza y obturación óptimas del conducto pulpar, comprometiendo seriamente el resultado clínico. Este evento accidental está principalmente asociado con el sobreuso y torque excesivo de las limas dentro del conducto. La mayoría de los clínicos optan por realizar la extracción del diente afectado, seguido por la colocación de un mantenedor de espacio. Otros practicantes intentan la remoción no quirúrgica del fragmento separado a través de técnicas disponibles probadas en dientes permanentes; sin embargo, estos métodos pueden causar daños significativos al diente y tejidos circundantes. Por otra parte, la preservación del fragmento metálico puede afectar el pronóstico del tratamiento e interferir con el proceso de reabsorción radicular fisiológico.

The influence of the particle's size on the setting reaction of sol-gel derived calcium silicate particles / A influência do tamanho de partícula na reação de presa de cimentos de silicate de cálcio produzidos por sol-gel

Introduction: This study aims to analyze the influence of particles size of sol-gel derived calcium silicate particles in the setting reaction of bioactive endodontic cements. Materials and Methods: Sol-gel derived calcium silicate particles were synthesized and sieved to separate the particles in different sizes: CS400, CS200, and CS100. A commercial MTA (Control) was used as control. The particle size and the specific surface area were assessed by laser diffraction and nitrogen adsorption. The cements were prepared with water as the liquid for the reaction. The setting time was conducted according to ISO 6876, and the setting kinetics was analyzed by Fourier trans-formed infrared spectroscopy (FTIR) at different time points between 120s to 72h. Results: The particle size varied from 9.45µm (CS400 ) to 31.01 (Control). The higher specific surface area valuer reached 15.14g/cm2 in the CS400. The smallest particle sizes, the higher specific surface area, and the lowest setting time were found for CS400 (p < 0.05). Control presented the highest setting time (p < 0.05). The FTIR analyses showed the differences in materials structure over time, with faster hydration and crystallization for CS400. The setting kinetics was slower for Control even when compared to a sol-gel derived group with similar particle size. Conclusion:The route of synthesis and the particle size influences the setting reaction of calcium silicate-based cements. The reduction of particle size for sol-gel derived calcium silicates lead to the acceleration of the setting reaction of the produced bioactive endodontic cement.

Introdução: Este estudo tem como objetivo analisar a influência do tamanho de partículas de silicato de cálcio derivadas de sol-gel na reação de presa de cimentos endodônticos bioativos. Materiais e Métodos: Partículas de silicato de cálcio derivadas de sol-gel foram sintetizadas e peneiradas para separar as partículas em diferentes tamanhos: CS400, CS200 e CS100. Um MTA comercial (Controle) foi usado como controle. O tamanho das partículas e a área superficial específica foram avaliados por difração a laser e adsorção de nitrogênio. Os cimentos foram preparados com água como líquido para a reação. O tempo de presa foi conduzido de acordo com a ISO 6876, e a cinética de presa foi analisada por espectroscopia de infravermelho transformada de Fourier (FTIR) em diferentes pontos de tempo entre 120s a 72h. Resultados: O tamanho de partícula variou entre 9,45µm (CS400) e 31,01 (Controle). A maior área de superfície foi encontrada nas partículas do grupo CS400 (15.14g/cm2). Os menores tamanhos de partícula, a maior área de superfície específica e o menor tempo de presa foram encontrados para CS400 (p < 0,05). O Control apresentou o maior tempo de presa (p < 0,05). As análises de FTIR mostraram as diferenças na estrutura dos materiais ao longo do tempo, com hidratação e cristalização mais rápidas para CS400. A cinética de presa foi mais lenta para Control mesmo quando comparado a um grupo derivado de sol-gel com tamanho de partícula semelhante. Conclusão: A rota de síntese e o tamanho das partículas influenciam a reação de endurecimento dos cimentos à base de silicato de cálcio. A redução do tamanho de partícula para silicatos de cálcio derivados de sol-gel leva à aceleração da reação de pega do cimento endodôntico bioativo produzido.