Efficacy and safety of tranexamic acid on reducing perioperative blood loss in patients with intertrochanteric fracture / 中国组织工程研究

BACKGROUND: Proximal femoral nail anti-rotation is widely used to treat various intertrochanteric fractures. Although its operation trauma is small, and the blood loss of perioperative period is still large. Tranexamic acid has been gradually used to reduce the bleeding of intertrochanteric fracture. The effectiveness and safety of reducing blood loss during perioperative period were not reported. OBJECTIVE: To explore the safety and efficacy of tranexamic acid on perioperative blood loss in patients with intertrochanteric fracture undergoing proximal femoral nail anti-rotation. METHODS: One hundred and eight patients with intertrochanteric fracture undergoing proximal femoral nail anti-rotation were selected from First Affiliated Hospital, Guangzhou University of Chinese Medicine between January 2015 and January 2017. Among all the subjects, 52 patients who received the operation before January 2016 served as the control group and 56 patients who received the operation after January 2016 were selected as the treatment group. Half an hour before operation, patients in the treatment group received 1 g tranexamic acid dissolved in 250 mL normal saline by intravenous dropping; patients in the control group just received 250 mL normal saline by intravenous dropping. The bleeding volume, blood transfusion volume, hemoglobin, hematocrit, coagulation index, D-dimer levels and complications were compared between the two groups. RESULTS AND CONCLUSION: (1) During perioperative period, actual blood loss, intraoperative blood loss, dominant blood loss, recessive blood loss, volume of drainage, blood transfusion volume and blood transfusion rate were lower in the treatment group than in the control group (P < 0.05). (2) There was no statistically significant difference in the hemoglobin and hematocrit between the two groups before operation (P > 0.05). The hemoglobin and hematocrit of the two groups gradually decreased after the operation, and there was a slight improvement in the fifth day after surgery. At postoperative 2 hours, 1, 3 and 5 days, the hemoglobin and hematocrit of the treatment group were higher than in the control group (P < 0.05). At preoperation and each time point postoperation, prothrombin time, activated partial thromboplastin time, and fibrinogen levels were not statistically significant between the two groups (P > 0.05). Postoperative D-dimer levels in the two groups were significantly higher than preoperation, and there was a return on the fifth day. There was no statistically significant difference between groups at preoperation and each time point of postoperation (P > 0.05). (3) The results suggest that the tranexamic acid can effectively reduce the dominant and recessive blood loss in patients with the intertrochanteric fracture, and it is safe and effective.

B7-H4 expression is elevated in human U251 glioma stem-like cells and is inducible in monocytes cultured with U251 stem-like cell conditioned medium / 癌症

Previous studies indicated that B7-H4, the youngest B7 family, negatively regulates T cell-mediated immunity and is significantly overexpressed in many human tumors. Tumor stem cells are purported to play a role in tumor renewal and resistance to radiation and chemotherapy. However, the link between B7-H4 and tumor stem cells is unclear. In this study, we investigated B7-H4 expression in the medium of human glioma U251 cell cultures. Immunofluorescence results showed that U251 cells cultured in serum-free medium (supplemented with 2% B27, 20 ng/mL epidermal growth factor, 20 ng/mL basic fibroblast growth factor) maintained stem-like cell characteristics, including expression of stem cell marker CD133 and the neural progenitor cell markers nestin and SOX2. In contrast, U251 cells cultured in serum-containing medium highly expressed differentiation marker glial fibrillary acidic protein. Flow cytometry analysis showed serum-free medium-cultured U251 cells expressed higher intracellular B7-H4 than serum-containing medium-cultured U251 cells (24%-35% vs. 8%-11%, P < 0.001). Immunofluorescence in purified monocytes from normal human peripheral blood mononuclear cells revealed moderate expression of B7-H4 after stimulation with conditioned medium from U251 cells cultured in serum-containing medium. Moreover, conditioned medium from U251 stem-like cells had a significant stimulation effect on B7-H4 expression compared with serum-containing conditioned medium (P < 0.01). Negative costimulatory molecule B7-H4 was preferentially expressed in U251 stem-like cells, and conditioned medium from these cells more effectively induced monocytes to express B7-H4 than conditioned medium from U251 cells cultured in the presence of serum. Our results show that U251 stem-like cells may play a more crucial role in tumor immunoloregulation with high expression of B7-H4.

Constitution identification and treatment with acupuncture-moxibustion for menopausal women / 中国针灸

According to the theory of constitution and disease prevention of Chinese medicine, kidney deficiency, lack of nourishment of the Thoroughfare Vessel and the Conception Vessel as well as qi sufficiency and blood deficiency are taken as the main features of body constitutions of women during menopausal period. Acupuncture-moxibustion treatment before or in the early stage of menopausal period are discussed initially. Methods of tonifying the kidney and regulate qi and blood are held as the main treating principles. Acupuncture points such as Sanyinjiao (SP 6), Shenshu (BL 23), Guanyuan (CV 4) and Baihui (GV 20) are adopted as the main points. And proper stimulation of needling and moxibustion are applied. Thus, a new way of thinking is provided for disease prevention and health keeping of women during menopausal period in China.

Research on the osteogenic ability of 3-Ds interconnected porous titanium / 中国骨伤

<p><b>OBJECTIVE</b>To evaluate the osteogenic ability of the three-dimensional interconnected porous titanium(TDIPT) coated with bonelike apatite, by the test of the culture of osteoblast in vitro.</p><p><b>METHODS</b>The pure TDIPT was prepared by the high temperature insostatic pressing (HIP) and was divided into two groups. One group of TDIPT was dipped into the 1.5 simulated body fluid (1.5 SBF) and developed the TDIPT coated with bone-like apatite (The test group). Another group was control group (pure TDIPT). The porous titanium of the two groups were all made into standard parts (5 mm x 5 mm x 4 mm) and placed into the 24-hole plates. The osteoblasts were extracted from SD rat. After the primary culture and subculture of the osteoblast in vitro, the osteoblasts were inoculated into the samples in the 24-pole plate and cultured continually. MTT Cell Proliferation Assay was done on the 1st, 3rd, 5th, 7th and 9th day respectively after inoculating. The ALP activity was tested on the 7th, 14th and 21st day, respectively. The collected data were analyzed by use of the student t test.</p><p><b>RESULTS</b>The MTT value and the ALP activity increased with the increasing of the culture time in the two group, but those of the test group was more significant than those of the control group (P < 0.05). Moreover, the osteoblast tachyauxesis and stable adhesion were observed in test group by SEM at the 7th day after culturing.</p><p><b>CONCLUSION</b>The bioactivity of the TDIPT improves significantly after coating with the bone-like apatite onto the surface of the TDIPT.</p>

Effect of pigmentation on the strength of dental Y-TZP/porcelain bilayered structure / 南方医科大学学报

<p><b>OBJECTIVE</b>To investigate the effect of two methods of pigmentation on the flexural strength of dental Y-TZP/porcelain layered structure.</p><p><b>METHODS</b>KaVo zirconia substructures were pigmented by dipping presintered blocks in the coloring solution VITA LL1 and LL5, and colored TZ-3YS zirconia substructures were fabricated by adding pigments before isostatic pressing. The colors No.1 and No.5 were used for the test. The specimens were made in monolithic or bilayered forms, and the flexural strength was tested. XRD and SEM with EDX were used to analyze the characteristics of the surface structure.</p><p><b>RESULTS</b>In KaVo group, no significant differences were found in the flexural strength between white and LL1 and LL5 colored monoclinic materials, nor in bilayered structures. While in TZ-3YS group, significant differences were noted in the flexural strength between color No.5 white and color No.1 monoclinic materials, but not between the latter two subgroups. The flexural strength was significantly lowered by veneering with porcelain in both zirconia groups, and similar findings were observed with the monoclinic materials. Only the tetragonal phase was detected in both of the zirconia groups.</p><p><b>CONCLUSION</b>Pigmentation has no apparent effects on the bonding strength between the veneering porcelain and zirconia. Both coloring methods are appropriate when the concentration of the pigments is under deliberate control.</p>

Effects of three types of veneering porcelain on bending strength of KAVO(TM) Y-TZP/porcelain bilayered structure / 南方医科大学学报

<p><b>OBJECTIVE</b>To investigate the effect of three types of veneering porcelain on the bending strength of KAVO Y-TZP/porcelain layered structure.</p><p><b>METHODS</b>KAVO zirconia ceramics were used as the substructure. To form Y-TZP/porcelain bilayered structure, a leucite-based veneering porcelain was fired on the zirconia substructures by slip-casting technique with dentin washbake, and two nano-fluorapatite-based veneering porcelains were fired on the zirconia substructures by either slip-casting or pressed-on technique with or without liner coverage. The bending strength was tested according to ISO 6872 standard, and the veneered surfaces of the fracture samples were analyzed by scanning electron microscopy (SEM).</p><p><b>RESULTS</b>For covering KAVO zirconia core material, the conventional veneering slurry-porcelain combined with liner or wash firing had significant higher bending strength than pressed-on porcelain. SEM showed that the main failure type at the interface was adhesive failure.</p><p><b>CONCLUSION</b>Thin layer sintering using washbake program or liner on KAVO zirconia surface increases the surface wettability, and this procedure may be indispensable when veneering on the surface of dental zirconia.</p>

Structure and properties of colored dental tetragonal zirconia stabilized by yttrium ceramics / 华西口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the structure, mechanical and low temperature aging properties of colored dental zirconia ceramics.</p><p><b>METHODS</b>5 graded colored dental zirconia ceramics were made by adding colorants and their combinations into a 3Y-TZP (tetragonal zirconia stabilized by 3mol% yttrium) powder, the green body were compacted at 200 MPa, pre-sinter at 1,050 degrees C and maintained for 2 h, then densely sintered at 1,500 degrees C for 2 h. Specimens were cut from each of the 5 graded colored blocks. Physical, mechanical properties as well as chemical stability were tested, microstructure were observed, crystalline phase were identified by X-ray diffraction (XRD), aging properties were assessed by measurement of the relative content of monoclinic phase and bending strength testing.</p><p><b>RESULTS</b>The overall density of colored zirconia ceramics was over 99.7%, linear shrinkage was about 20%, while thermal expansion coefficient was about 11 x 10(-6) x degrees C(-1), the crystalline phase was tetragonal, bending strength was over 900 MPa which was slightly lowered than that of the uncolored zirconia, fracture toughness was slightly higher. Good chemical stability in acetic acid was observed. After aging treatment, tetragonal-to-monoclinic phase transformation was detected up to 40%, while bending strength was not significantly degraded.</p><p><b>CONCLUSION</b>The results showed that colored 3Y-TZP ceramics presented good mechanical properties even after aging treatments, and was suitable for dental clinical use.</p>

Preparation and chromaticity properties of colored dental 3Y-TZP ceramics / 华西口腔医学杂志

<p><b>OBJECTIVE</b>To obtain and investigate the chromaticity properties of colored dental 3Y-TZP ceramics with different colorant combinations.</p><p><b>METHODS</b>Colorant combinations were mixed with TZ-3Y-S powder, then the mixtures were compacted at 200 MPa using cold isostatic pressure, densely sintered at 1500 degrees C for 2 h forming 5 graded colored dental zirconia ceramics. Specimen were sectioned into 10 mm x 10 mm x 0.5 mm and 10 mm x l0 mmx 1 mm slices from the sintered blocks. Color measurement was performed under black background using spectrophotometer. The chromaticity properties were compared with that of the VITA In-Ceram YZ shade guide.</p><p><b>RESULTS</b>Five colored dental zirconia ceramics were obtained. The lightness decreased gradually, and the chroma value increased gradually. The color differences of the two thickness specimens were little. The parameters of the color space were L*: 67.76-77.78; a*: -2.19-3.80; b*: 12.13-25.01, which was similar with that of the VITA In-Ceram YZ shade guide, while the lowest value of lightness was relatively higher than that of the VITA In-Ceram YZ shade guide.</p><p><b>CONCLUSION</b>Colored 3Y-TZP dental ceramics are suitable for clinical use. There is a need to develop more darkness shaded zirconia dental ceramics.</p>

In vitro evaluation of low-temperature aging effects of Y2O3 stabilized tetragonal zirconia polycrystals dental ceramics / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the influence of in vitro low-temperature degradation (LTD) treatment on the structural stability of 5 kinds of Y2O3 stabilized tetragonal zirconia polycrystals (Y-TZP) dental ceramics.</p><p><b>METHODS</b>TZ-3YS powder was compacted at 200 MPa using cold isostatic pressure and pre-sintered at 1050 degrees C for 2 h forming presintered blocks. Specimens were sectioned into 15 mm x 15 mm x 1.5 mm slices from blocks of TZ-3YS, Vita In-Ceram YZ, Ivoclar, Cercon Smart, and Kavo Y-TZP presintered blocks, 18 slices for each brand, and then densely sintered. Specimens were divided into 6 groups and subjected to an accelerated aging test carried out in an autoclave in steam at 134 degrees C, 0.2 MPa, for 0, 1, 2, 3, 4, and 5 h. X-ray diffraction (XRD) was used to identify crystal phases and relative content of monoclinic phase was calculated. Specimens for three-point bending test were fabricated using TZ-3YS ceramics according to the ISO 6872 standard and bending strength was tested before and after aging. The polished and aging specimens of TZ-3YS and Cercon Smart zirconia ceramics were observed by atomic force microscopy (AFM) to evaluate surface microstructure.</p><p><b>RESULTS</b>Tetragonal-to-monoclinic phase transformation was detected for specimens of TZ-3YS, Vita In-Ceram YZ, Ivoclar, and Kavo zirconia ceramics except for Cercon Smart ceramics after aging, and the relative content of monoclinic phase was increasing with the prolonged aging time. TZ-3YS was the most affected material, Kavo took the second, and Vita and Ivoclar were similar. Aging had no significant negative effects on flexural strength of TZ-3YS with average bending strength being over 1100 MPa. The nucleation and growth of monoclinic phase were detected by AFM in surface of Cercon Smart zirconia in which monoclinic phase was not detected by XRD.</p><p><b>CONCLUSIONS</b>The results suggest that LTD of dental Y-TZP is time dependent, but the aging test does not reduce the flexural strength of TZ-3YS. The long-term clinical serviceability of dental Y-TZP needs further observation.</p>

Detection of recombinant lysostaphin using antibody sandwish enzyme-linked immunoadsorbent assay / 生物工程学报

The double-antibody-sandwich enzyme-linked immunoadsorbent assay (ELISA) for detection of rLysostaphin in humans had been developed and established through this study. rLysostaphin of high purity ( > 95 % ) produced in Shanghai Hi-Tech United Bio-Technological Research & Development Co., Ltd (SHUBRD) was used to produce a rabbit anti-rLysostaphin polyclonal antibody. The standard curve of rLysostaphin polyclonal antibody that was constructed showed that the lowest range of detection was found at 0. 98 ng of rLysostaphin/mL, and the curve exhibited linearity preferably from 0. 98 to 500 ng of rLysostaphin/mL. When three serum samples of the same batch were assayed for 6 replicates, and more 3 samples from different batches for 6 replicates, the average intra-assay and inter-assay coefficient variances ( CV) were 6. 4% and 6. 5%, respectively. The relative recovery rate was 98.6% when quantitative standard antigens were added to the serum. The present method for detection of rLysostaphin in serum is specific, highly sensitive, highly precise, and exhibited a low CV and will be helpful in the further study of rLysostaphin pharmacokinetics and holds promise in clinical applications.

Association of high-sensitivity C-reactive protein with risk factors of cerebral infarction in patients with type 2 diabetic mellitus / 中国基层医药

Objective To examine the serum high-sensitivity C-reactive protein(hs-CRP)levels in subjects with type 2 diabetic mellitus(DM)or DM accompanied by cerebral infarction(DM+CI),and the relationship be- tween the serum high-sensitivity C-reactive protein(hs-CRP)levels,and to investigate risk factors of cerebral infarc- tion in patients with type 2 diabetic mellitus.Methods The serum high-sensitivity C-reactive protein(hs-CRP)lev- els were measured in 50 DM patients,50 DM+CI patients and 30 healthy controls by ultra-sensitive immunoassay. hs-CRP values and its relationship with cerebral infarction in patients with type 2 diabetic mellitus and other factors, such as age,BMI,TG,etc,were analyzed.Results Univariate analysis revealed significant differences in hs-CRP concentrations between controls[(0.73?0.46)mg/L]and subjects with DM[(2.26?1.38)mg/L],or subjects with DM+CI[(3.82?2.67)mg/L](P

The preparation, structure evaluation and preliminary application of biomimetic biphasic calcium phosphate scaffold / 中华外科杂志

<p><b>OBJECTIVE</b>To fabricate biomimetic biphasic calcium phosphate BCP ceramic scaffolds using three-dimensional (3D) gel-lamination technology and evaluated their structure with 3D parameters and related method.</p><p><b>METHODS</b>Series two-dimensional images of femoral head's specimen of dogs were obtained by micro-computed tomography (Micro-CT). According to these images, porous biomimetic biphasic calcium phosphate (BCP) ceramic scaffolds with oriented trabecular structure were fabricated by three-dimensional (3D) gel-lamination technology. And then, the three-dimensional structure of the scaffolds were reconstructed by computer according to Micro-CT images of these scaffolds and evaluated by three-dimensional parameters. These parameters included bone volume fraction (BVF, BV/TV), bone surface/bone volume (BS/BV) ratio, trabecular thickness (Tb.Th), trabecular number (Tb.N), trabecular spacing (Tb.Sp) and structure model index (SMI). The biomechanical properties and biocompatibility of these scaffolds were also evaluated in the study. Six scaffolds, which were combined with BMCs (bone mesenchymal cells, BMCs), were planted into the bone defect of six dogs' femoral head respectively.</p><p><b>RESULTS</b>There was no significant difference between trabecular samples and BCP scaffolds in BV/TV, Tb.Th, Tb.N, and Tb.Pf (P > 0.05). The trabecular system of the scaffold, which had some orientation, represented plate-like model. With a micro-porous porosity of 62%, the average compressive modulus and ultimate strength along the axis of the scaffolds reached (464.0 +/- 36.0) MPa and (5.6 +/- 0.8) MPa respectively. The results of animal test indicated that the trabeculae of these scaffolds were covered by a layer of new bone after 10 weeks of operation.</p><p><b>CONCLUSION</b>Porous BCP scaffolds have been produced with oriented microarchitectural features designed to facilitate vascular invasion and cellular attachment and with initial mechanical properties comparable to those of trabecular bone.</p>

Coloration of mica glass ceramic for use in dental CAD/CAM system / 中华口腔医学杂志

<p><b>OBJECTIVE</b>An intrinsically colored machinable glass-ceramic containing tetrasilicic fluormica as the predominant crystal phase was studied, which was used in molar crown in dental CAD/CAM system.</p><p><b>METHODS</b>Orthogonal design analysis was used to select appropriate base formula, coloration and heat treatment process.</p><p><b>RESULTS</b>Factors influencing the color appearance of mica glass ceramic were nucleation agent and the ratio of Mg(2+) to K(+) in base formula; Cerium oxide (CeO(2)) was used as the main coloration; The preferred heat treatment was 650 degrees C for 1 h and 1,000 degrees C or 1,050 degrees C for 3 h - 4 h.</p><p><b>CONCLUSIONS</b>This mica glass-ceramic could provide 4 to 5 color appearance for dental use, it showed excellent machinability which was eminently suitable for use in dental CAD/CAM system.</p>

The bonding characteristic of titanium and RG experiment porcelain / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To study the bonding characteristic of Titanium and RG experiment porcelain.</p><p><b>METHODS</b>5 specimens with a size of 10 mm x 5 mm x 1.4 mm were cast from pure titanium. Then 1 mm of RG experiment opaque and body porcelain were fused on the surface of the titanium specimens. The interface of titanium and porcelain was analyzed with a scanning electron microscope with energy-despersive spectrometry; 6 metal specimens with the size of 25 mm x 3 mm x 0.5 mm were cast from Ni-Cr alloy and a uniform thickness of 1 mm of VMK 99 porcelain was veneered on the central area of 8 mm x 3 mm 18 metal specimens as the same size were cast from pure titanium. The uniform thickness of 1 mm of VITA TITANKERAMIK porcelain, of Noritake super porcelain Ti-22 and of RG experiment porcelain were veneered on every 6 specimens respectively in the central area of 8 mm x 3 mm. The specimens were subjected to a three-point bending test on a load-test machine with a span of 20 mm, then the failure loads were recorded and statistically analysised. The RG porcelain/titanium crown was fabricated by fusing RG opaque porcelain and body porcelain to cast titanium substrate crown.</p><p><b>RESULTS</b>The SEM results show no porosity and crackle were found in the interface. The energy-dispersive spectrometry show that there are Si, Ti and O in the 1 micro m layer between porcelain and titanium, which suggesting titanium and experiment porcelain bonding well. The three point test showed the fracture force for the combinations of titanium/VITA TITANKERAMIK porcelain, titanium/Noritake super porcelain Ti-22 and titanium/RG experiment porcelain were (7.233 +/- 2.539) N, (5.533 +/- 1.199) N and (6.316 +/- 1.433) N respectively. There were not statistically significant differences among them (t test, P < 0.01). The fracture force for the Ni-Cr alloy/VMK99 porcelain combination (12.733 +/- 3.297) N was significantly greater than those of the cast titanium/porcelain (t test, P > 0.05). The crown was translucent with no crack.</p><p><b>CONCLUSION</b>RG porcelain is well compatible with titanium.</p>

Effect of Preventive Acupuncture and Moxibustion at Guanyuan (CV-4) on the Expressions of Estrogen Receptor-? and Heat Shock Protein-70 in the Uterus of Natural Climacteric Rats / 中医杂志

Objective To observe the effect of preventive acupuncture and moxibustion at Guanyuan(CV 4)on abnormal activity in early climacteric rats.Methods Using four-month-old female SD rats as young control group,the 24 ten-month-old SD female rats screened by vaginal smear were randomized into 4 groups.The climacteric models by natural aging were established.The changes of estrogen receptor(ER-?)and heat shock protein-70(HSP-70)expressions resulted from the effect of preventive acupuncture and preventive moxibustion were observed.Results The expression of ER-? decreased gradually in the uterus of natural climacteric rats(P