Properties of Patient-Reported Outcome Measures for Post-Traumatic Stress Disorder in North Korean Defectors: A Scoping Review

Objective@#Posttraumatic stress disorder (PTSD) is highly prevalent among North Korean defectors. This scoping review aimed to appraise the measurement properties of patient-reported outcome measures (PROMs) that assess PTSD among North Korean defectors. @*Methods@#A systematic search was conducted using Research Information Sharing Service, ScienceON, PubMed, and Embase from their inception up to September 15, 2022. Each measurement properties of the included PROMs were evaluated using COnsensus-based Standards for the selection of health status Measurement INstruments (COSMIN) methodology. First, the methodological quality of each study on measurement properties was evaluated using the COSMIN Risk of Bias checklist. Second, the result of each single study on a measurement property was rated against the updated criteria for good measurement properties. @*Results@#After screening the articles, nine instruments from 40 studies were included. Among these instruments, Impact of Event ScaleRevised was the most frequently used (13 studies [38.1%]), followed by the Trauma Scale for North Korean Refugees, PTSD Checklist, and Posttraumatic Diagnostic Scale. The theoretical basis of all PROMs was secure in terms of content validity. The most frequently tested characteristics in measurement properties for internal structure were internal consistency, criterion validity, and convergent validity. No study reported sufficient structural validity as confirmatory factor analysis results with a model fit. @*Conclusion@#There is insufficient evidence to support the recommendation of a specific PROM for use among North Korean defectors with PTSD.

Effect of abutment neck taper and cement types on the amount of remnant cement in cement-retained implant restorations:an in vitro study

PURPOSE@#The present study aims to analyze the effect of abutment neck taper and types of cement on the amount of undetected remnant cement of cement-retained implant prostheses. @*MATERIALS AND METHODS@#Three neck taper angles (53°, 65°, 77°) and three types of cement (RMGI: resin-modified glass ionomer, ZPC: zinc phosphate cement, ZOE: zinc oxide eugenol cement) were used. For each group, the surface percentage was measured using digital image and graphic editing software. The weight of before and after removing remnant cement from the abutment-crown assembly was measured using an electronic scale. Two-way ANOVA and Duncan & Scheffe’s test were used to compare the calculated surface percentage and weight of remnant cement (α = .05). @*RESULTS@#There were significant differences in remnant cement surface percentage and weight according to neck taper angles (P .05). The wide abutment with a small neck taper angle showed the most significant amount of remnant cement. And the types of luting cement did not influence the amount of residual cement. @*CONCLUSION@#To remove excess cement better, the emergence profile of the crown should be straight to the neck taper of the abutment in cement-retained implant restoration.

Esthetic considerations for anterior implant-supported prostheses:focus on surgical and prosthetic treatment

As the increased certainty of osseointegration, new parameters are now being used to assess implant success. Accordingly, patients’ and clinicians’ high demands and expectation for esthetics have expanded and implant-supported restorations show better esthetic outcomes. The pre-implant treatment planning process, the implant surgical steps and the post-surgery prosthetic process can affect all esthetic outcomes. Prevention of esthetic implant failures can be achieved by appropriate treatment at each stage, considering the 3 factors of alveolar bone, soft tissue, and implants. It is necessary to achieve the esthetic implant prostheses followings: minimal invasive surgery, bone augmentation, ideal 3-dimensional implant position, peri-implant soft tissue management, and provisional restorations to optimize peri-implant soft tissue architecture.

Effect of attachments and palatal coverage of maxillary implant overdenture on stress distribution: a finite element analysis

Purpose@#The purpose of this study was to evaluate the effect of attachments and palatal coverage on stress distribution in maxillary implant overdenture using finite element analysis. @*Materials and Methods@#Four maxillary overdenture 3-D models with four implants placed in the anterior region were fabricated with computer-aided design. 1) Ball-F: Non-splinted ball attachment and full palatal coverage, 2) Ball-P: Non-splinted ball attachment and U-shaped partial palatal coverage, 3) Bar-F: Splinted milled bar attachment and full palatal coverage, 4) Bar-P: Splinted milled bar attachment and U-shaped partial palatal coverage. Stress distribution analysis was performed with ANSYS workbench 14. 100 N vertical load was applied at the right first molar unilaterally and maximum stress was calculated at the implant, peri-implant bone and mucosa. @*Results@#The use of the ball attachment showed lower maximum stress on implant and peri-implant bone than the use of the milled bar attachment. But it showed contrary tendency in the mucosa. Regardless of attachment, full palatal coverage showed lower maximum stress on implant, peri-implant bone and mucosa. @*Conclusion@#Within the limitation of this study, ball attachment improved stress distribution on implant and periimplant bone rather than milled bar attachment in maxillary implant overdenture. Also, full palatal coverage is more favorable in stress distribution.

Optimization of exposure parameters and relationship between subjective and technical image quality in cone-beam computed tomography

PURPOSE: This study was performed to investigate the effect of exposure parameters on image quality obtained using a cone-beam computed tomography (CBCT) scanner and the relationship between physical factors and clinical image quality depending on the diagnostic task. MATERIALS AND METHODS: CBCT images of a SedentexCT IQ phantom and a real skull phantom were obtained under different combinations of tube voltage and tube current (Alphard 3030 CBCT scanner, 78–90 kVp and 2–8 mA). The images obtained using a SedentexCT IQ phantom were analyzed technically, and the physical factors of image noise, contrast resolution, spatial resolution, and metal artifacts were measured. The images obtained using a real skull phantom were evaluated for each diagnostic task by 6 oral and maxillofacial radiologists, and each setting was classified as acceptable or unacceptable based on those evaluations. A statistical analysis of the relationships of exposure parameters and physical factors with observer scores was conducted. RESULTS: For periapical diagnosis and implant planning, the tube current of the acceptable images was significantly higher than that of the unacceptable images. Image noise, the contrast-to-noise ratio (CNR), the line pair chart on the Z axis, and modulation transfer function (MTF) values showed statistically significant differences between the acceptable and unacceptable image groups. The cut-off values obtained using receiver operating characteristic curves for CNR and MTF 10 were useful for determining acceptability. CONCLUSION: Tube current had a major influence on clinical image quality. CNR and MTF 10 were useful physical factors that showed significantly associations with clinical image quality.

Oxaliplatin-induced Peripheral Neuropathy, Symptoms, Distress and Quality of Life among Korean Patients with Gastrointestinal Cancer

PURPOSE: This study was conducted to identify the level of oxaliplatin-induced peripheral neuropathy (OIPN), symptoms, distress, and quality of life (QoL) in gastrointestinal (GI) cancer patients and to identify the factors influencing QoL.METHODS: A total of 123 patients were recruited for this cross-sectional study. Surveys used were the Therapy-Induced Neuropathy Assessment Scale (TNAS) for OIPN, the MD Anderson Symptom Inventory (MDASI-GI) for general symptoms associated with gastrointestinal cancer and its treatment, a distress thermometer, and the Euro Quality of Life Questionnaire 5-Dimensional Classification (EQ-5D) for QoL.RESULTS: The patients were classified into three groups based on their treatment completion time (current, completed less than one year ago, completed more than one year ago). The scores of MDASI-GI and distress were significantly lower in patients who had completed chemotherapy compared to those who were undergoing treatment (p=.04 and .02 respectively). However, TNAS score was significantly higher in patients who completed chemotherapy less than one year ago than the other two groups (p=.001). In multivariate regression models, the OIPN and distress or general symptoms were identified as factors associated with QoL.CONCLUSION: In this study, we identified the symptoms that are factors related to the QoL in patients with GI cancer. In particular, the symptoms of OIPN are reported at significantly increased levels for patients who have finished chemotherapy less than one year ago, so efforts to prevent and manage the symptoms of OIPN are needed in this timeframe. To improve QoL of patients with GI cancer, continuous attention and care are required not only during the treatment of cancer but also after the completion of treatment.

Full mouth rehabilitation of fully edentulous patient with implant-supported fixed prosthesis preceding bone graft: A case report / 대한치과보철학회지

Prosthetic treatment using implants in fully edentulous patients includes implant-supported fixed prosthesis, implant hybrid prosthesis, implant retained- or supported-overdenture and implant supported fixed prosthesis has advantages such as psychological stability, pronunciation. If an implant supported fixed prosthesis is planned, the implants should be placed in consideration of pronunciation, esthetics, and oral hygiene. For this, clinical and radiological diagnosis is indispensable. When placing the prosthetic driven implant at the site determined from the diagnosis, a sufficient amount of alveolar bone and soft tissue support are required. If these requirements found to be insufficient, a wide range of bone grafting should be performed in advance. In this case, a fully edentulous patient with severe alveolar bone resorption due to periodontal disease was treated with a full mouth rehabilitation using implant-supported fixed prosthesis preceding maxillary sinus graft and alveolar bone augmentation. We report this patient were satisfied with esthetic and function.

Three-year follow-up of full mouth rehabilitation with anterior implant surveyed bridges and distal extension removable partial denture / 대한치과보철학회지

In partial edentulous patients, implant-assisted removable partial denture which provide additional retention and support by placing a small number of implants in strategic positions might be suitable treatment. This case of patient with loss of maxillary posterior teeth and moderate to severe wear of residual dentition, three implants were placed in the maxillary anterior edentulous area and then surveyed bridges were made including remaining anterior natural teeth. Posterior edentulous area was restored with distal extension removable partial denture (RPD). In addition, the worn mandibular natural teeth were restored with fixed prostheses. As a result, reduced vertical dimension and collapsed occlusal plane were rehabilitated, and improved functionally and aesthetically. The purpose of this case was to report the results of three-year follow-up of full mouth rehabilitation with anterior implant surveyed bridges and distal extension RPD.

Recurrent symptomatic cemento-osseous dysplasia: A case report

Cemento-osseous dysplasia (COD) is a benign fibro-osseous lesion of bone, in which normal bone is replaced by fibrous tissue, followed by calcification with osseous and cementum-like tissue. COD is classified into 3 categories according to its location: periapical, focal, and florid COD (FCOD). On radiography, FCOD appears radiolucent in its early stages. As it matures, radiopacities appear within the lesion, causing them to show a mixed appearance of radiolucency and radiopacity. Because FCOD is usually asymptomatic and grows in a self-limited manner, it does not require treatment. Secondary infection is the most frequent cause of symptomatic cases. We report a case of FCOD with symptoms that appeared after a dental restoration procedure and persisted after repeated operations. The purpose of this report is to emphasize the importance of thorough radiological evaluations of patients with FCOD before treatment.

Esthetic implant restoration in the maxillary anterior missing area with palatal defect of the alveolar bone: a case report

It is challenging to produce esthetic implant restoration in the narrow anterior maxilla region where insufficient volume of alveolar bone could limit the angle and position of implant fixture, if preceding bone augmentation is not considered. Ideal angle and position of implant fixture placement should be established to reproduce harmonious emergence profile with marginal gingiva of implant prosthesis, bone augmentation considered to be preceded before implant placement occasionally. In this case, preceding bone augmentation has been operated before esthetic implant prosthesis in narrow anterior maxilla region. Preceded excessive bone augmentation in buccal area allowed proper angulation of implantation, which compensates unfavorable implant position. Provisional restorations were corrected during sufficient period to make harmonious level of marginal gingiva and interdental papilla. The definite restoration was fabricated using zirconia core based glass ceramic. Functionally and esthetically satisfactory results were obtained.

Internal derangement as a predictor of provoked pain on mouth opening: A magnetic resonance imaging study

PURPOSE: This study investigated the relationship between pain and internal derangement in temporomandibular disorder (TMD) patients using magnetic resonance imaging (MRI). MATERIALS AND METHODS: This study analyzed 356 TMD patients (712 temporomandibular joints [TMJs]). The inclusion criteria were the presence of spontaneous or provoked pain on one or both TMJs and having undergone MRI. The patients with provoked pain were divided into 3 groups: pain on palpation, pain on mouth opening, and pain on mastication. MRI was performed using a 1.5-T scanner. T1- and T2-weighted parasagittal and paracoronal images were obtained. According to the findings on the T1-weighted images, another 3 groups were created based on internal derangement: normal, disc displacement with reduction, and disc displacement without reduction. The MRI findings were independently interpreted by 2 experienced oral and maxillofacial radiologists at 2 different times. Statistical analysis was performed by the chi-square test using SPSS (version 12.0; SPSS Inc., Chicago, IL, USA). RESULTS: Provoked pain on mouth opening was found to be correlated with internal derangement in TMD patients (P .05). CONCLUSION: These results suggest that internal derangement was a significant predictor of provoked pain on mouth opening.

Complication and management of implant-assisted removable partial denture with distal extension: a clinical report

Implant supported removable partial denture (ISRPD) using the implants enables favorable rehabilitation by complementing biomechanical limitations of the conventional removable partial denture (RPD). However, continuous recall check is necessary for evaluation of the mechanical and biological complications to ensure good long-term prognosis of ISRPD. This clinical report describes the complication and management in patient of Kennedy class I edentulism with ISRPD using healing abutment. The wear and fracture of healing abutment occurred at 36 months after delivery. So, healing abutment was replaced by connecting Locator® abutment for altering into the implant retained partial overdenture.

A clinical study on the trocar-guided mesh repair system for pelvic organ prolapse surgery

OBJECTIVE: To evaluate the complication and recurrence rates in patients undergoing trocar-guided mesh implant for pelvic organ prolapse (POP) treatment. METHODS: A retrospective study was performed based on the medical records of patients who had undergone mesh implant by one surgeon from May 2006 to August 2013 at the Presbyterian Medical Center in Korea. We evaluated perioperative complications such as bladder injury, mesh exposure, urinary symptoms, infections, and chronic pelvic pain. Recurrence was defined as a POP-quantification system stage ≥II or any symptomatic prolapse. RESULTS: Sixty-seven patients were evaluated, and the mean age of patients was 65.4±7.2 years. Stage ≥III POP-quantification Ba was noted in 61 patients (91%). Intraoperative complications included three cases of bladder injury (4.5%). The mean follow-up period was 44.1±7.9 months. Postoperative complications occurred in seven women (10.5%): four cases of urinary symptoms (6%), two cases of infections (3%), and one case of chronic pelvic pain (1.5%). Mesh exposure did not occur (0%). Prolapse recurrence was reported in five patients (7.5%). CONCLUSION: Based on our operational result, the trocar-guided mesh implant seems to provide safe and effective outcomes.

Physical, Psychological and Social Symptoms, Activity and Education of Children and Adolescents with Acute Lymphoblastic Leukemia Receiving Maintenance Chemotherapy

PURPOSE: This study was to identify the physical, psychological and social symptoms of ALL (acute lymphoblastic leukemia) children and adolescents receiving maintenance chemotherapy to build a basic data set to produce effective nursing intervention and ultimately help their early return to school and social adaptation. METHODS: Fifty ALL children and adolescents between 4 and 18, who were receiving maintenance chemotherapy were surveyed on days 2, 7, and 28. For younger children, between the age of 4 and the 3rd year in elementary school, their primary caregivers answered the survey and those between the 4th year in elementary school and the age of 18 answered the survey themselves. RESULTS: During maintenance chemotherapy, ALL children and adolescents experience diverse physical, psychological and social symptoms. On days 7 and 28, physical and social symptoms were greater than physical symptoms. Physical symptoms were greatest on day 2 and the most psychological and social symptoms were observed on day 7. During the maintenance chemotherapy period, 40% of the children and adolescents could not attend regular educational institutions. CONCLUSION: Since each point in the maintenance chemotherapy period shows different symptomatic characteristics, nursing intervention can be provided appropriately for each specific point to help the patients' social adaptation and early return to school.

Influence of nano-structured alumina coating treatment on shear bond strength between zirconia ceramic and resin cement / 대한치과보철학회지

PURPOSE: The aim of this study was to investigate whether the application of nano-structured alumina coating to the surface of Y-TZP could enhance the bond strength with resin cement. MATERIALS AND METHODS: A total of 80 zirconia plates were prepared and divided into four groups. : 1) airborne particle abrasion treatment (A) : 2) Rocatec treatment after airborne particle abrasion (R) : 3) nano-structured alumina coating treatment after polishing (PC) and 4) nano-structured alumina coating after airborne particle abrasion (AC). Alumina coating was formed by the hydrolysis of aluminium nitride (AlN) powder and heat treatment at 900℃. Coating patterns were observed with FE-SEM. Resin block was bonded to treated zirconia ceramics using resin cement. The shear bond strengths were measured before and after thermocycling. RESULTS: The FE-SEM images show a dense and uniform nano-structured alumina coating structure, which enhances shear bond strength by increasing micro mechanical interlocking to resin cement. PC and AC groups showed higher shear bond strengths than A and R groups before and after thermocycling. A and R groups displayed significant drops in shear bond strength after thermocycling. However, PC and AC groups did not show any meaningful decreases in shear bond strength after thermocycling. CONCLUSION: Treatment of Y-TZP ceramics with nano-structured alumina coating could significantly increase their shear bond strength.

Mandibular implant-supported overdenture using CAD-CAM Konus type attachment: A case report / 대한치과보철학회지

In edentulous mandible, implant supported overdenture was considered as a first treatment option. Konus type attachment supplies rigid support and cross arch stabilization so that more favorable force transmission and distribution can be attained. In the dentistry, computer aided design-computer aided manufacturing (CAD-CAM) system makes it possible to fabricate restorations with high precision and effectiveness. Recently, Palladium-silver (Pd-Ag) alloy which is millable has been developed. This article presents that application of CAD-CAM Konus type attachment can be provide satisfactory stability and function on four-implant supported mandibular overdenture.

Full mouth rehabilitation utilizing implant-assisted removable partial denture with a canted occlusal plane: a case report

Implant-assisted removable partial denture (Implant-assisted RPD, IARPD), posterior edentulous extension areas of which obtains additional support and retention from implants, is attracting increasing interest. This case report presents a successful treatment on a partially edentulous patient with a severely canted occlusal plane resulted from a long-term use of posterior extended RPD. The full mouth was rehabilitated through a fixed prosthesis on maxilla and IARPD with zirconia occlusal surface on mandible, which allowed to achieve an esthetic occlusal plane with long-term stability and, ultimately, functionally satisfying outcome.

Gardner syndrome associated with multiple osteomas, intestinal polyposis, and epidermoid cysts

Gardner syndrome is known as a variant of familial adenomatous polyposis. This syndrome is characterized by multiple intestinal polyposes, osteomas, and epidermoid cysts. In addition, dental abnormalities include an increased frequency of multiple odontomas, as well as supernumerary and impacted teeth. The authors report the case of a 7-year-old male patient with Gardner syndrome. Radiographic findings revealed multiple osteomas in both sides of the maxilla, multiple diffuse enostoses in both jaws, and a complex odontoma in the left mandibular body. Two years later, multiple epidermoid cysts on the scalp were found. Since this patient was suspected to have Gardner syndrome, the authors recommended gastrointestinal endoscopy to check for intestinal polyposis. Gastrointestinal endoscopic examination revealed multiple polyposes in the upper gastrointestinal tract and fundus of the stomach. As a result, the final diagnosis was Gardner syndrome.

Removable implant-supported partial denture using milled bar with Locator(R) attachments in a cleft lip & palate patient: A clinical report / 대한치과보철학회지

Due to the limitations of conventional removable partial denture prostheses to treat a cleft lip & palate patient who shows scar tissue on upper lip, excessive absorption of the maxillary residual alveolar ridge, and class III malocclusion with narrow palate and undergrowth of the maxilla, 4 implants were placed on the maxillary edentulous region and a maxillary removable implant-supported partial denture was planned using a CAD/CAM milled titanium bar. Unlike metal or gold casting technique which has shrinkage after the molding, CAD/CAM milled titanium bar is highly-precise, economical and lightweight. In practice, however, it is very hard to obtain accurate friction-fit from the milled bar and reduction in retention can occur due to repetitive insertion and removal of the denture. Various auxiliary retention systems (e.g. ERA(R), CEKA(R), magnetics, Locator(R) attachment), in order to deal with these problems, can be used to obtain additional retention, cost-effectiveness and ease of replacement. Out of diverse auxiliary attachments, Locator(R) has characteristics that are dual retentive, minimal in vertical height and convenient of attachment replacement. Drill and tapping method is simple and the replacement of the metal female part of Locator(R) attachment is convenient. In this case, the Locator(R) attachment is connected to the milled titanium bar fabricated by CAD/CAM, using the drill and tapping technique. Afterward, screw holes were formed and 3 Locator(R) attachments were secured with 20 Ncm holding force for additional retention. Following this procedure, satisfactory results were obtained in terms of aesthetic facial form, masticatory function and denture retention, and I hereby report this case.

A full-mouth rehabilitation using zirconia all-ceramic crowns: a case report

As patients' esthetic expectations increase, there is an increase in demand for cosmetic restorations of anterior and posterior teeth that resemble the natural tooth morphology and color. An example of high-strength all-ceramic systems is zirconia with CAD/CAM application. This case report describes a full-mouth rehabilitation using zirconia all-ceramic crowns supported by upper and lower implants and by a minimal increase in the occlusal vertical dimension in a patient with severe abrasion due to loss of posterior teeth.