Advances in biodegradation of polyolefin plastics / 生物工程学报

Polyolefin plastics are a group of polymers with C-C backbone that have been widely used in various areas of daily life. Due to their stable chemical properties and poor biodegradability, polyolefin plastic waste continues to accumulate worldwide, causing serious environmental pollution and ecological crises. In recent years, biological degradation of polyolefin plastics has attracted considerable attention. The abundant microbial resources in the nature offer the possibility of biodegradation of polyolefin plastic waste, and microorganisms capable of degrading polyolefin have been reported. This review summarizes the research progress on the biodegradation microbial resources and the biodegradation mechanisms of polyolefin plastics, presents the current challenges in the biodegradation of polyolefin plastics, and provides an outlook on future research directions.

Preface to the special issue: biotechnology of plastic waste degradation and valorization / 生物工程学报

Synthetic plastics have been widely used in various fields of the national economy and are the pillar industry. However, irregular production, plastic product use, and plastic waste piling have caused long-term accumulation in the environment, contributing considerably to the global solid waste stream and environmental plastic pollution, which has become a global problem to be solved. Biodegradation has recently emerged as a viable disposal method for a circular plastic economy and has become a thriving research area. In recent years, important breakthroughs have been made in the screening, isolation, and identification of plastic-degrading microorganisms/enzyme resources and their further engineering, which provide new ideas and solutions for treating microplastics in the environment and the closed-loop bio-recycling of waste plastics. On the other hand, the use of microorganisms (pure cultures or consortia) to further transform different plastic degradants into biodegradable plastics and other compounds with high added value is of great significance, promoting the development of a plastic recycling economy and reducing the carbon emission of plastics in their life cycle. We edited a Special Issue on the topic of "Biotechnology of Plastic Waste Degradation and Valorization", focusing on the researches progress in three aspects: Mining microbial and enzyme resources for plastic biodegradation, Design and engineering of plastic depolymerase, and biological high-value transformation of plastic degradants. In total, 16 papers have been collected in this issue including reviews, comments, and research articles, which provide reference and guidance for further development of plastic waste degradation and valorization biotechnology.

Application and population control strategy of microbial modular co-culture engineering / 生物工程学报

Traditional methods of microbial synthesis usually rely on a single engineered strain to synthesize the target product through metabolic engineering. The key cofactors, precursors and energy are produced by the introduced complex synthetic pathways. This would increase the physiological burden of engineering strains, resulting in a decrease in the yield of target products. The modular co-culture engineering has become an attractive solution for effective heterologous biosynthesis, where product yield can be greatly improved. In the modular co-culture engineering, the coordination between the population of different modules is essential for increasing the production efficiency. This article summarized recent advances in the application of modular co-culture engineering and population control strategies.

The recent advances in developing gene editing and expression tools and the synthesis of natural products in Yarrowia lipolytica / 生物工程学报

Yarrowia lipolytica, as an important oleaginous yeast, has been widely used in metabolic engineering. Y. lipolytica is considered as an ideal host for the production of natural products such as terpenes, polyketides and flavonoids, due to its ability to utilize a variety of hydrophobic substrates, high stress tolerance to acid and salt, high flux of tricarboxylic acid cycle and the ability in providing abundant the common precursor acetyl-CoA. Recently, more and more tools for genetic editing, gene expression and regulation has been developed in Y. lipolytica, which facilitate the metabolic engineering of Y. lipolytica for bio-manufacturing. In this review, we summarized the recent progresses in developing gene expression and natural product synthesis in Y. lipolytica, and also discussed the challenges and possible solutions in heterologous synthesis of natural products in this yeast.

Recent advances of continuous in vivo evolution / 生物工程学报

Laboratory evolution is an important approach to improve the performance of microorganisms. In the past decades, the methods for laboratory evolution have developed rapidly and applied widely. However, the commonly used evolution strategies for strains or specific proteins cannot achieve continuous mutation, and require multiple rounds of operation, therefore they are considered as a labor intensive process. The development of mutation and screening technologies have facilitated the development of continuous evolution in vivo and greatly improved the efficiency of laboratory evolution. The continuous in vivo evolution achieves in vivo mutation, perfectly combining mutation with screening to evolve a specific phenotype with minimal human intervention. This review summarizes the recent advances of in vivo continuous evolution technologies for either genome-scale mutation or evolution of specific proteins. The principles of these technologies and their applications are introduced. On this basis, the advantages and limitations of these technologies are discussed. We also give a perspective of future development of continuous in vivo evolution.

Degradation of petroleum-based plastics by microbes and microbial consortia / 生物工程学报

Along with the increasingly serious environmental pollution, dealing with the "white pollution" issue, which is caused by the worldwide use of not readily-degradable or non-degradable synthetic plastics, has become a great challenge. It is an environmentally friendly strategy to degrade synthetic plastics using microorganisms that exist in nature or evolved under selection pressure. Based on the NSFC-EU International Cooperation and Exchanges Project "Bio Innovation of a Circular Economy for Plastics", this review summarized the screening of bacteria, fungi and microbial consortia capable of degrading synthetic plastics such as polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), polyurethane (PUR), and polyethylene terephthalate (PET). We also analyzed the role of various microorganisms played in the degradation of petroleum-based plastics. Moreover, we discussed the pros and cons of using microorganisms and enzymes for degradation of synthetic plastics.

Plastics biodegradation and recycling - the introduction of China-Europe cooperation project "Synthetic microorganism communities for plastic degradation and transformation" / 生物工程学报

The China-European environmental biotechnology cooperation research project on the biodegradation of waste plastics is jointly funded by the National Natural Science Foundation of China (NSFC) and the European Commission (EC), and aims to encourage Chinese and European scientists to carry out substantive research in the field of "Microorganism communities for plastics biodegradation". The goal of the project is to use the metabolic capacity of microbial communities to degrade petrochemical plastics that are easy to cause environmental pollution into monomers and small molecules, thereby realizing the biosynthesis of high-value biochemicals by microorganisms. This can not only solve the problem of plastic pollution, but also "turn waste into treasure" and create higher economic benefits. The China-European cooperative research project will promote in-depth cooperation between scientists from both sides in the field of synthetic biology, and help the two sides establish long-term and stable international exchanges and cooperation. Both China and the EU will work to solve the global plastic pollution problem, form a strategic force of science and technology, and jointly open a new chapter in the field of resource utilization of non-degradable plastics.

Efficient polyhydroxybutyrate production from cheap resources by recombinant Escherichia coli / 生物工程学报

Based on the fermentation analysis of Escherichia coli strains and cheap renewable resources suitable for polyhydroxybutyrate (PHB) production, we constructed a ptsG mutant of Escherichia coli DH5alpha. Application of E. coli DH5alpha mutant together with stress-induced system, we could produce PHB efficiently from cheap renewable sugar mixture by the simultaneous consumption of different sugars. Batch fermentation at lab scale (5 liter) showed that E. coli DH5alpha deltaptsG/pQKZ103 produced PHB from sugar mixture up to 84.6% of cell dry weight in 32 hours; meanwhile, the cell dry weight reached 8.24 g/L.

Synthetic biology for metabolic engineering--a review / 生物工程学报

In the last few decades, with the development of recombinant DNA technology, metabolic engineering has made tremendous advances. Synthetic biology is a newly and rapidly emerging discipline. It has great potential in assisting and simplifying the study of metabolic engineering. This review focuses on the recent development of synthetic biology and its application in optimizing metabolic pathway and engineering cellular chassis.

Expression, purification and characterization of N-glycanase from Schizosaccharomyces pombe in Escherichia coli / 生物工程学报

One pair of primers were designed and synthesized on the base of the cDNA sequence encoding Schizosaccharomyces pombe N-glycanase reported on the GenBank. The cDNA sequence encoding Peptide N-glycanase was cloned from the Schizosaccharomyces pombe by RT-PCR. And then the RT-PCR product was cloned into the expression vector pET-15b. The expression vector pET-15b(+)/Png1p was transformed into E. coli BL21(DE3). The results showed that the relative molecular weight of the enzyme was determined to be approximately 39 kD using SDS-PAGE. The expression products after induction and purification can catalyze the cleavage of N-linked oligosaccharides from glycoprotein coped with heat, but have no action on the native glycoprotein with the help of DTT. The percentage of deglycosylated RNase B treated with equate Png1p in different reaction temperature, pH, concentration of DTT and denatured temperature showed that the optimum temperature, the optimum pH is 30 degrees C; the optimum concentration of DTT is 10 mmol/L and the optimum denatured temperature is 100 degrees C.

Construction of engineered Escherichia coli for aerobic succinate production / 生物工程学报

Based on carbon metabolic pathway analysis of Escherichia coli MG1655, an aerobic succinate fermentation platform was constructed by knocking out five genes (ptsG, poxB, pta, iclR and sdhA), which was named E. coli QZ1111. Flask cultivation results showed that E. coli QZ1111 could accumulate succinate with a concentration of 26.4 g/L under aerobic conditions. The byproduct acetate was only 2.3 g/L. The production ratio of succinate and acetate reached 11.5:1.