RESUMO
The present study aimed to assess the molecular profiles of subepithelial connective tissue grafts (CTGs) obtained at different locations and depths in the human palate. Sixty-four CTGs belonging to anterior deep (AD), anterior superficial (AS), posterior deep (PD), and posterior superficial (PS) groups were subjected to RNA-Sequencing and their transcriptomes were analyzed computationally. Functional correlations characterizing the CTG groups were validated by cell biological experiments using primary human palatal fibroblasts (HPFs) extracted from the CTGs. A clearly more pronounced location-dependent than depth-dependent difference between the grafts, with a minimal number of genes (4) showing no dependence on the location, was revealed. Epithelial, endothelial, and monocytic cell migration was strongly (P < 0.001) potentiated by AD- and PS-HPFs. Moreover, significantly increased expression of genes encoding C-C and C-X-C motif chemokine ligands as well as significantly (P < 0.01) activated p38 signaling suggested immunomodulatory phenotype for AD- and PS-HPFs. Increased growth factor gene expression and significantly activated (P < 0.001) Erk and Akt signaling in HPFs originating from A-CTGs implied their involvement in cell survival, proliferation, and motility. Prominent collagen-rich expression profile contributing to high mechanical stability, increased osteogenesis-related gene expression, and strongly activated (P < 0.001) Smad1/5/8 signaling characterized HPFs originating from P-CTGs. The present data indicate that in humans, differences between palatal CTGs harvested from different locations and depths appear to be location- rather than depth-dependent. Our findings provide the basis for future personalization of the therapeutic strategy by selecting an optimal graft type depending on the clinical indications.
Assuntos
Humanos , Tecido Conjuntivo/transplante , Palato , Colágeno , Fibroblastos , Transdução de SinaisRESUMO
Objective: To prepare the sustained release system of icariin (ICA) @ gelatin nanoparticles (GNPs)-polyactic-co-glycolic acid (PLGA) (ICA @ GNPs-PLGA), and to optimize the conditions. Methods: ICA@GNPs-PLGA sustained release system was prepared using two-step desolvation method and S/O/W emulsion solvent-evaporation technique. The effects of different conditions, such as the PLGA: GNPs mass ratio and the total quality of ICA added on the entrapment efficiency (EE) of ICA® GNPs-PLGA composite microspheres were detected to optimize the preparation process. The surface morphology of GNPs and ICA @ GNPs-PLGA composite microspheres were observed by SEM. The EE and the release results of ICA@GNPs-PLGA in the sample were determined with HPLC Results: The prepared composite microspheres and nanocomplex were were white powder. The SEM results showed that the composite microspheres and nanocomplexs were spherical, the surfaces were smoothy, and the particle size distribution range was 4-12 μm and 150-200 nm, respectively, relatively uniform At a GNPs mass fraction of 6 mg, the critical concentration of PLGA in DCM ranged within 0.5%-1.0%. At a GNPs mass fraction of 12 mg, the critical concentration of PLGA in DCM ranged within 1.0%-2.0%. However, at a critical PLGA mass fraction lower than 0.25%, no fully formed composite microspheres were observed. Within the critical concentration, the average EE of ICA@ GNPs-PLGA microspheres was higher than (62.00 ± 1.25)%. In addition, the EE of ICA in the microspheres was negatively correlated with the quality of ICA added. The accumulative release rate was less than in 24 h and it was 65.21% in 40 d. Conclusion: The ICA@GNPs-PLGA microspheres with homogeneous particle size distribution, high EE, low initial burst and without agglomeration can be acquired under the optimized conditions.
RESUMO
OBJECTIVE:To provide reference for improving drug dispensing speed of pharmacy intravenous admixture services (PIVAS).METHODS:The reasons for slow drug dispensing in PIVAS of our hospital were analyzed,quality control circle (QCC) activity was conducted according to ten steps as subject selection,plan formulation,current situation control,goal setting,goal analysis,countermeasure formulation,countermeasure implementation and review,effect confirmation,standardization,review and improvement.The effect of QCC activity was evaluated by drug dispensing speed and the rate of drug dispensing error.RESULTS:Main reasons for slow drug dispensing in PIVAS in our hospital included not fixed position of the infusion bag,insufficient pre-dispensing drug basket,not unified method of sticking doctor's order labels,not eye-catching drag position identification,unreasonable drug shelf position.Drug dispensing speed increased from 2.99 bag/person/min to 4.90 bag/person/min,and the target yield rate was 95% through displacing injection according to the doctor's order,re-making the drug shelf logo,preparing adequate pre-dispensing basket in advance,sticking the prescription tag of medical order standardly,etc.The rate of drug dispensing error decreased from 0.005% to 0.002% after improving and optimizing drug dispensing procedure.CONCLUSIONS:The application of QCC activity,improvement and optimization of drug dispensing procedure in PIVAS in our hospital not only improve drug dispensing speed in PIVAS,but also reduce the rate of drug dispensing error.
RESUMO
Objective:To prepare the sustained release system of icariin(ICA)@ gelatin nanoparticles (GNPs)-polyactic-co-glycolic acid(PLGA)(ICA @ GNPs-PLGA), and to optimize the conditions. Methods:ICA@GNPs-PLGA sustained release system was prepared using two-step desolvation method and S/O/W emulsion solvent-evaporation technique.The effects of different conditions,such as the PLGA:GNPs mass ratio and the total quality of ICA added on the entrapment efficiency(EE)of ICA@GNPs-PLGA composite microspheres were detected to optimize the preparation process. The surface morphology of GNPs and ICA@GNPs-PLGA composite microspheres were observed by SEM.The EE and the release results of ICA@GNPs-PLGA in the sample were determined with HPLC.Results:The prepared composite microspheres and nanocomplex were were white powder.The SEM results showed that the composite microspheres and nanocomplexs were spherical,the surfaces were smoothy,and the particle size distribution range was 4-12 μm and 150-200 nm,respectively,relatively uniform.At a GNPs mass fraction of 6 mg,the critical concentration of PLGA in DCM ranged within 0.5%-1.0%.At a GNPs mass fraction of 12 mg,the critical concentration of PLGA in DCM ranged within 1.0%-2.0%.However,at a critical PLGA mass fraction lower than 0.25%,no fully formed composite microspheres were observed.Within the critical concentration,the average EE of ICA@GNPs-PLGA microspheres was higher than(62.00±1.25)%.In addition,the EE of ICA in the microspheres was negatively correlated with the quality of ICA added.The accumulative release rate was less than in 24 h and it was 65.21% in 40 d.Conclusion:The ICA@GNPs-PLGA microspheres with homogeneous particle size distribution,high EE,low initial burst and without agglomeration can be acquired under the optimized conditions.
RESUMO
A quantitative analysis method of multi-components with a single marker (QAMS) for simultaneous determination of six marker compounds (one from phenolic acids and five from phthalides) in Chuanxiong Rhizoma was established by applying HPLC and using butylidenephthalide as the internal reference substance. And also the feasibility and accuracy of the established method for quality evaluation and application of Chuanxiong Rhizoma were investigated and validated. The analysis was performed with the mobile phase consisting of acetonitrile - 0.2% aqueous formic acid. The flow rate was 1.0 mL . min-1 and the column temperature was maintained at 30 °C. The detection wavelengths were set at 252 nm (for ferulic acid, Z-ligustilide, and butylidenephthalide) and 266 nm (for senkyunolide I, senkyunolide A, and coniferyl ferulate), separately, and 20 µL was injected for analysis with gradient elution. The results showed that there were no significant differences observed between the HPLC-QAMS method and the external standard method (RSD <5%). The relative correction factors were credible (RSD < 5%) in changed chromatographic conditions. The established HPLC-QAMS method can be accurately used for simultaneously evaluating and controlling the quality of Chuanxiong Rhizoma with multi-components.
RESUMO
Objective To identify clinical predictive factors in intractable childhood epilepsy,to provide some evidence for its early diagnosis.Methods Six hundred and twenty-four children with newly diagnosed epilepsy were retrospectively identified in Xinhua Hospital Affiliated to Shanghai Jiaotong University Medical School(1993-2009).The epileptic children were divided into a drug-responsive epilepsy group (n =584) and an intractable epilepsy group (n =40).Clinical data of patients were retrospectively analyzed,including the gender,age,pathogen,inducement,number of pre-treatment seizures,seizure type,seizure type change,seizure duration,family history,previous history,physical examination,brain CT and initial electroencephalogram(EEG) findings.Single factor analysis and Logistic regression analysis were made in 2 groups.Results Strong univariate associations suggested that some factors could increase the risks of intractable epilepsy:symptomatic or cryptogenic epilepsy,mental retardation,type of infantile spasm,positive neurological examination and large absolute number of pre-treatment seizures,and changes in seizure types in the course of the disease.With multiple Logistic regression,independent predictors of intractability were symptomatic or cryptogenic etiology(OR =3.61),large absolute number of pre-treatment seizures and changes in seizure types in the course of the disease(OR =4.76).Conclusions It's necessary to be wary of intractable epilepsy and to adjust therapy accordingly when seizures were uncontrollable and accompanied by one or more conditions such as symptomatic or cryptogenic epilepsy,large absolute number of pre-treatment seizures,changes in seizure types in the course of the disease.
RESUMO
A high performance liquid chromatographic assay has been developed for the simultaneous determination of four water soluble vitamins,thia min, ribo-flavin, uiacin and pyridoxine, in cereal products and fresh vegetables. For hydrolyzing sample in 0.4 mol/L HCL, autoclaving at 120℃, 15 psi for 30 minutes, a ?Bondapak column (300mm ? 3.9mm, Waters Co), a mobile phase of methanol-water (30:70) (0.005 mol/L heptanesulfonic acid) and a flow rate of 1.0ml/min gave the most satisfactory separation of the four vitamins. A double channel detector was used: three vitamins (B1, B2 and B5) were detected by UV spectrophotometry (254 nm) first, pyridoxine (B6) was detected by fluorometry (EX 290 nm, EM 390 nm) afterwards. Detection limits were 2, 5, 5 and 2ng, linear ranges were 5-40 ng, 5-50 ng, 5-40 ng and 5-50 ng for B1, B2, B5 and Be, respectively. Recoveries were 91.3%-102% (B1), 103%-105% (B2), 92%-100% (B5) and 99%-100% (B6), comparing with reference method and checking with food composition tables, very satisfactory results were obtained by this method.