Study on the diagnostic value of different posterior cruciate ligament index measurement methods for anterior cruciate ligament injury / 中国骨伤

OBJECTIVE@#To compare the posterior cruciate ligament(PCL) index with six different measurement methods, and analyze and verify its clinical diagnostic value in anterior cruciate ligament (ACL) injury.@*METHODS@#The Magnetic resonance imaging (MRI) data of 225 knee joints in our hospital from May 2018 to March 2022 were retrospectively analyzed, aged from 18 to 60 years old, with a median of 32 years old. On the sagittal MRI images of 114 patients with ACL injury and 111 patients with intact ACL, Measure the straight-line distance (A) between the femoral attachment point and the tibial attachment point of the PCL on the MRI sagittal image and the maximum vertical distance (B) between the straight line and the arcuate mark point of the PCL on the sagittal image, calculate the PCL index and evaluate the diagnostic value of the PCL index for ACL injury.@*RESULTS@#The PCL index of the ACL normal group and the ACL injury group were statistically described. There was no significant difference in PCL index 1, 2, 3 and 6 between the two groups(P>0.05). The difference of PCL index 4 and 5 between the two groups was statistically significant (P<0.001). This study only found that the PCL index 2, 6 in the ACL normal group had a negative correlation with the patient's age (correlation coefficient=-0.213, -0.819;P<0.05), and the PCL index 5 in the ACL injury group was significantly correlated with the patient's body mass index(BMI)had a negative correlation (correlation coefficient=-0.277, P<0.05).@*CONCLUSION@#The change of PCL index is helpful for the diagnosis of ACL injury, PCL index 4 and 5 can be used as effective reference indexes for diagnosing ACL injury in clinic.

Optimization of process parameters of 3D printed clozapine dispersive tablets and establishment of personalized dose model / 药学学报

This study aims to establish the design space of the key processes for drop-on-powder 3D printing based on design of experiment (DoE). By utilizing Minitab, an experimental scheme with three factors, two levels and three center points was designed to analyze the factors that significantly affected the tablet quality attributes. Furthermore, the factor interactions were analyzed using Minitab. subsequently, the computer aided drafting (CAD) software was used to adjust the model volume with fixed radius/height ratio (r/h = 1.25) and establish a linear regression equation between model volume and dose. As a result, the drug dose could be controlled in a flexible manner. The finally determined process parameters were: ink-jet level is 12, layer thickness is 150 μm, and the X-axis printing head speed of 635 mm·s-1. Regression equation between drug content (y) and model volume (x) was y = 0.062 x - 0.582 7 (R2 = 0.999 9) showing good linear relationship. This indicated that robust and feasible process parameters were obtained through DoE, and the preparation of personalized-dose tablets was realized with good reproducibility.

Comparative study on posterior cruciate ligament reconstruction with autologous hamstring tendon and LARS artificial ligament in the treatment of KD-Ⅲ-M knee dislocation / 中国骨伤

OBJECTIVE@#To observe the curative effect of one-stage reconstruction of anterior cruciate ligament(ACL), posterior cruciate ligament (PCL) and medial collateral ligament (MCL) in patients with KD-Ⅲ-M knee injury, and to compare the operation time, hospitalization cost and curative effect after arthroscopic reconstruction of PCL with LARS artificial ligament and autogenous hamstring tendon, ACL reconstruction with autogenous hamstring tendon and MCL repair combined with limited incision.@*METHODS@#From March 2016 to January 2019, a total of 36 patients met the criteria of this study. Twenty patients in group A were treated with autogenous hamstring tendon reconstruction of ACL and PCL and repair of MCL, including 17 males and 3 females, with an average age of (34.7±9.2) years old. Sixteen patients in group B with LARS artificial ligament reconstruction of PCL, with an autogenous hamstring tendon reconstruction of PCL and MCL repair as before as group B, including 15 males and 1 female, with an average age of (36.8±8.6) years old. The operation time, hospitalization time and total hospitalization cost were compared between the two groups. The preoperative and postoperative functions of the two groups were evaluated by Hospital for Sepcial Surgery (HSS) score and Lysholm score respectively, and the curative effects were compared within and between groups.@*RESULTS@#All the patients in the two groups were followed up for at least 1 year. There were no complications such as infection and poor wound healing in both groups. There was significant difference in operation time between (120.25±9.55) min in group A and (106.63±8.85) min in group B (@*CONCLUSION@#There was no significant difference in the average hospitalization days between the two groups, but the operation time in group A was longerthan that in group B, and the hospitalization cost in group B was higher than that in group A. There was no difference in HSS score and Lysholm score before and follow-up for a certain period of time after operation.

The principle of drop-on-powder 3D printing and its application and challenge in solid preparation / 药学学报

3D printing technology has the advantages of accurate spatial distribution, accurate drug release and personalized drug dosage, which can make up for the shortcomings of traditional pharmaceutical technology. In recent years drop-on powder (DoP) 3D printing technology has been widely used in pharmaceutical preparation. Compared with other types of 3D printing technology, it is more simple, flexible and easy to operate. In 2015, Aprecia Pharmaceuticals announced that the US Food and Drug Administration (FDA) approves the launch of its first instant tablet Spritam® (levetiracetam) made with DoP 3D printing. After the first 3D printed medicine was launched, people also saw the unique advantages and broad prospects of DoP 3D printing technology platform in pharmaceutical preparation. This review focuses on the technical principles and key factors of DoP 3D printing, its application in the preparation field and its future development challenges.

Identification of an IDO1 inhibitor prodrug that specifically targets tumor tissue / 药学学报

Hypoxia-activated prodrugs that specifically target tumor tissues were designed by attaching the nitro-aromatic ring carrier molecules that can be degraded in the hypoxic microenvironment of the tumor to the hydroxyamidine group of IDO1 inhibitor compound B and epacadostat. Eleven prodrug compounds were synthesized and their structures were confirmed by 1H NMR and HR-MS. Compounds F-1 and F-6, which had a higher stability and drug release rate, were identified by an in vitro stability assay, nitroreductase reduction assay, MTT assay, and an in vivo tumor tissue hypoxia degradation assay, and then evaluated for anti-tumor efficacy in vivo. The results showed that prodrug F-1 inhibited tumor growth by 67.41%, which was significantly higher than 42.31% for the starting drug group. It appeared that the inhibition of IDO1 in the tumor tissue was different from the overall inhibition of IDO1 in vivo. Animal treatment procedures were carried out with the approval of the Animal Care and Use Committee of the Chinese Academy of Medical Sciences and Peking Union Medical College.

Screening and characterization of aptamers of Cepsilon3-Cepsilon4 protein / 药学学报

In order to obtain nucleotides aptamers bind to IgE, 80 bp nucleotides single-stranded DNA library containing 40 random nucleotides was designed and synthesized. Oligonucleotides that bind to human Cepsilon3-Cepsilon4 protein were isolated from ssDNA pools by the systematic evolution of ligands by exponential enrichment (SELEX) method using nitrocellulose filters as screening medium. Through the optimization of critical PCR and asymmetric PCR parameters including annealing temperature, cycles, and molar ratios of target protein and ssDNA etc, a suitable screening system was established. The aptamers of Cepsilon3-Cepsilon4 protein with high affinity and high specificity were identified by ELISA with biotin-streptavidin-horseradish peroxidase system, and its primary sequence and second structure were analyzed by DNAMAN package and DNA folding sever after being cloned and sequenced. Moreover, target protein was bound to one aptamer and another aptamer modified with biotion together forming a sandwich-like complex, which was captured in microwell to detect IgE concentration using the optimal combination in the sandwich method named enzyme-linked aptamers sorption assay (ELASA). The method could be used for the quantitative detection of human IgE, and whose sensitivity reached to 120 ng x mL(-1).

Progress in the study of allergic disease drugs targeting on IgE/FcepsilonRI signaling pathway / 药学学报

Allergic diseases have become global social health problems. The binding of IgE with its high affinity receptor FcepsilonRI plays a key step in I-type allergy. Recently, more and more key molecules on the IgE/FcepsilonRI signaling transduction pathway were to be the drug candidates against allergic diseases, with in-depth study of FcepsilonRI signal pathway gradually. The main drugs include molecule antibodies, peptides, vaccines, fusion proteins, small molecules, and other drugs related to IgE/FcepsilonRI. The recent progress in the study of mechanisms of representative drugs targeting on IgE/FcepsilonRI signaling pathway was reviewed in this article.

Establishment of a rat chronic asthma model and its evaluation / 药学学报

This study is to establish a rat chronic asthma model. Sensitive SD rats were selected through histamine challenge. The asthmatic groups were sensitized by ih and ip with OVA, aluminium hydroxide gel and inactivated bacillus pertussis on day 1 and 14. From day 21, acute asthmatic group was aerosolized 1% OVA for 1 week, chronic asthmatic group was aerosolized 0.1% OVA for 12 weeks. The control groups received saline as the substitution of OVA. Twenty four hours after the last provocation, physiological monitoring equipment was used to detect the pulmonary function, then the rats were sacrificed. Bronchoalveolar lavage fluid (BALF) was collected to calculate the ratio of different inflammatory cells. ELISA was used to detect total IgE and OVA-specific IgE in serum. Microscopy was conducted to observe the histopathology of lung stained with haematoxylin and eosin staining. Collagen fibers were detected using Picric acid-Sirius red staining technique. The optical density at 610 nm of extractive from locus caeruleus was detected by passive cutaneous anaphylaxis (PCA). The results showed that the asthmatic characteristics were significantly developed in model groups, but not in control groups. Chronic asthmatic group had significantly higher indexes than acute asthmatic group, including the thickness of airway smooth muscle and bronchial basement membrane, and goblet cell hyperplasia, the area of collagen in airways, A610 of extractive from locus caeruleus, the concentration of total IgE and OVA-specific IgE in serum. However, inflammatory cell infiltrate in lungs and the percentage of eosinophils of white blood cells in BALF were lower in chronic asthmatic group than those in acute asthmatic group. Respiratory rate and respiratory flow showed no significant difference in both model groups. In conclusion, the rat chronic asthma model is established by the way in this study, which is comparable to the physiopathologic characteristics of human asthma.