Variations in soil physico-chemical properties, soil stocks, and soil stoichiometry under different soil layers, the major forest region Liupan Mountains of Northwest China

Abstract Liupan Mountains are an important region in China in the context of forest cover and vegetation due to huge afforestation and plantation practices, which brought changes in soil physio-chemical properties, soil stocks, and soil stoichiometries are rarely been understood. The study aims to explore the distribution of soil nutrients at 1-m soil depth in the plantation forest region. The soil samples at five depth increments (0-20, 20-40, 40-60, 60-80, and 80-100 cm) were collected and analyzed for different soil physio-chemical characteristics. The results showed a significant variation in soil bulk density (BD), soil porosity, pH, cation exchange capacity (CEC), and electric conductivity (EC) values. More soil BD (1.41 g cm-3) and pH (6.97) were noticed in the deep soil layer (80-100 cm), while the highest values of porosity (60.6%), EC (0.09 mS cm-1), and CEC (32.9 c mol kg-1) were reflected in the uppermost soil layer (0-20 cm). Similarly, the highest contents of soil organic carbon (SOC), total phosphorus (TP), available phosphorus (AP), total nitrogen (TN), and available potassium (AK) were calculated in the surface soil layer (0-20 cm). With increasing soil depth increment a decreasing trend in the SOC and other nutrient concentration were found, whereas the soil total potassium (TK) produced a negative correlation with soil layer depth. The entire results produced the distribution of SOCs and TNs (stocks) at various soil depths in forestland patterns were 020cm > 2040cm > 4060cm 6080cm 80100 cm. Furthermore, the stoichiometric ratios of C, N, and P, the C/P, and N/P ratios showed maximum values (66.49 and 5.46) in 0-20 cm and lowest values (23.78 and 1.91) in 80-100 cm soil layer depth. Though the C/N ratio was statistically similar across the whole soil profile (0-100 cm). These results highlighted that the soil depth increments might largely be attributed to fluctuations in soil physio-chemical properties, soil stocks, and soil stoichiometries. Further study is needed to draw more conclusions on nutrient dynamics, soil stocks, and soil stoichiometry in these forests.

Resumo As montanhas de Liupan são uma região importante na China no contexto de cobertura florestal e vegetação devido às enormes práticas de florestamento e plantação, que trouxeram mudanças nas propriedades físico-químicas do solo, e estoques e estequiometrias do solo raramente são compreendidos. O estudo visa explorar a distribuição de nutrientes do solo a 1 m de profundidade do solo na região da floresta plantada. As amostras de solo em cinco incrementos de profundidade (0-20, 20-40, 40-60, 60-80 e 80-100 cm) foram coletadas e analisadas para diferentes características físico-químicas do solo. Os resultados mostraram uma variação significativa nos valores de densidade do solo (BD), porosidade do solo, pH, capacidade de troca catiônica (CEC) e condutividade elétrica (CE). Mais DB do solo (1,41 g cm-3) e pH (6,97) do solo foram observados na camada profunda do solo (80-100 cm), enquanto os maiores valores de porosidade (60,6%), CE (0,09 mS cm-1) e CEC (32,9 c mol kg-1) foram refletidos na camada superior do solo (0-20 cm). Da mesma forma, os maiores teores de carbono orgânico do solo (SOC), fósforo total (TP), fósforo disponível (AP), nitrogênio total (TN) e potássio disponível (AK) foram calculados na camada superficial do solo (0-20 cm). Com o aumento do incremento da profundidade do solo, uma tendência decrescente no SOC e na concentração de outros nutrientes foi encontrada, enquanto o potássio total do solo (TK) produziu uma correlação negativa com a profundidade da camada do solo. Todos os resultados produziram a distribuição de SOCs e TNs (estoques) em várias profundidades de solo em padrões de floresta 0 20cm> 20 40cm> 40 60cm 60 80cm 80 100 cm. Além disso, as relações estequiométricas de C, N e P, as relações C / P e N / P, apresentaram valores máximos (66,49 e 5,46) em 0-20 cm, e valores mais baixos (23,78 e 1,91) em solo de 80-100 cm profundidade da camada. Embora a relação C / N fosse estatisticamente semelhante em todo o perfil do solo (0-100 cm). Esses resultados destacaram que os incrementos de profundidade do solo podem ser amplamente atribuídos a flutuações nas propriedades físico-químicas do solo, estoques e estequiometrias do solo. Mais estudos são necessários para tirar conclusões adicionais sobre a dinâmica dos nutrientes, estoques de solo e estequiometria do solo nessas florestas.

Variations in soil physico-chemical properties, soil stocks, and soil stoichiometry under different soil layers, the major forest region Liupan Mountains of Northwest China / Variações nas propriedades físico-químicas do solo, estoques e estequiometria do solo sob diferentes camadas de solo, a principal região florestal das montanhas Liupan do noroeste da China

Liupan Mountains are an important region in China in the context of forest cover and vegetation due to huge afforestation and plantation practices, which brought changes in soil physio-chemical properties, soil stocks, and soil stoichiometries are rarely been understood. The study aims to explore the distribution of soil nutrients at 1-m soil depth in the plantation forest region. The soil samples at five depth increments (0-20, 20-40, 40-60, 60-80, and 80-100 cm) were collected and analyzed for different soil physio-chemical characteristics. The results showed a significant variation in soil bulk density (BD), soil porosity, pH, cation exchange capacity (CEC), and electric conductivity (EC) values. More soil BD (1.41 g cm-3) and pH (6.97) were noticed in the deep soil layer (80-100 cm), while the highest values of porosity (60.6%), EC (0.09 mS cm-1), and CEC (32.9 c mol kg-1) were reflected in the uppermost soil layer (0-20 cm). Similarly, the highest contents of soil organic carbon (SOC), total phosphorus (TP), available phosphorus (AP), total nitrogen (TN), and available potassium (AK) were calculated in the surface soil layer (0-20 cm). With increasing soil depth increment a decreasing trend in the SOC and other nutrient concentration were found, whereas the soil total potassium (TK) produced a negative correlation with soil layer depth. The entire results produced the distribution of SOCs and TNs (stocks) at various soil depths in forestland patterns were 0→20cm > 20→40cm > 40→60cm ≥ 60→80cm ≥ 80→100 cm. Furthermore, the stoichiometric ratios of C, N, and P, the C/P, and N/P ratios showed maximum values (66.49 and 5.46) in 0-20 cm and lowest values (23.78 and 1.91) in 80-100 cm soil layer depth. Though the C/N ratio was statistically similar across the whole soil profile (0-100 cm). These results highlighted that the soil depth increments might largely be attributed to fluctuations in soil physio-chemical properties, soil stocks, and soil stoichiometries. Further study is needed to draw more conclusions on nutrient dynamics, soil stocks, and soil stoichiometry in these forests.

As montanhas de Liupan são uma região importante na China no contexto de cobertura florestal e vegetação devido às enormes práticas de florestamento e plantação, que trouxeram mudanças nas propriedades físico-químicas do solo, e estoques e estequiometrias do solo raramente são compreendidos. O estudo visa explorar a distribuição de nutrientes do solo a 1 m de profundidade do solo na região da floresta plantada. As amostras de solo em cinco incrementos de profundidade (0-20, 20-40, 40-60, 60-80 e 80-100 cm) foram coletadas e analisadas para diferentes características físico-químicas do solo. Os resultados mostraram uma variação significativa nos valores de densidade do solo (BD), porosidade do solo, pH, capacidade de troca catiônica (CEC) e condutividade elétrica (CE). Mais DB do solo (1,41 g cm-3) e pH (6,97) do solo foram observados na camada profunda do solo (80-100 cm), enquanto os maiores valores de porosidade (60,6%), CE (0,09 mS cm-1) e CEC (32,9 c mol kg-1) foram refletidos na camada superior do solo (0-20 cm). Da mesma forma, os maiores teores de carbono orgânico do solo (SOC), fósforo total (TP), fósforo disponível (AP), nitrogênio total (TN) e potássio disponível (AK) foram calculados na camada superficial do solo (0-20 cm). Com o aumento do incremento da profundidade do solo, uma tendência decrescente no SOC e na concentração de outros nutrientes foi encontrada, enquanto o potássio total do solo (TK) produziu uma correlação negativa com a profundidade da camada do solo. Todos os resultados produziram a distribuição de SOCs e TNs (estoques) em várias profundidades de solo em padrões de floresta 0 → 20cm> 20 → 40cm> 40 → 60cm ≥ 60 → 80cm ≥ 80 → 100 cm. Além disso, as relações estequiométricas de C, N e P, as relações C / P e N / P, apresentaram valores máximos (66,49 e 5,46) em 0-20 cm, e valores mais baixos (23,78 e 1,91) em solo de 80-100 cm profundidade da camada. Embora a relação C / N fosse estatisticamente semelhante em todo o perfil do solo (0-100 cm). Esses resultados destacaram que os incrementos de profundidade do solo podem ser amplamente atribuídos a flutuações nas propriedades físico-químicas do solo, estoques e estequiometrias do solo. Mais estudos são necessários para tirar conclusões adicionais sobre a dinâmica dos nutrientes, estoques de solo e estequiometria do solo nessas florestas.

Composición de los macroinvertebrados según la calidad del agua en turberas de altura, Costa Rica / Composition of macroinvertebrates according to water quality in high altitude peatbogs, Costa Rica

Resumen Introducción: En Costa Rica, las turberas de altura se localizan en la Cordillera de Talamanca de 2 400 a 3 200 m. Se forman a partir de depósitos de materia orgánica en descomposición, con oxígeno reducido y baja disponibilidad de nutrientes. Objetivo: Evaluar la variación en la composición de macroinvertebrados acuáticos según parámetros fisicoquímicos de calidad del agua superficial en turberas de altura, Costa Rica. Métodos: Se colocaron 32 sustratos artificiales en las turberas para ser colonizados por macroinvertebrados. Se realizaron evaluaciones fisicoquímicas mensuales del agua superficial en ocho turberas con visitas mensuales durante la estación lluviosa. Se utilizaron los índices ICA-NSF y BMWP-CR para evaluar la calidad del agua. Resultados: Se registraron un total de diez familias correspondientes a siete géneros. Las familias más representativas fueron Chironomidae y Limnephilidae. La calidad del agua se clasificó según el ICA-NSF como de "calidad media" y como de "calidad regular a mala" según el BMWP-CR. Conclusiones: Las turberas de altura son ecosistemas poco estudiados, esta investigación evidencia la necesidad de diseñar metodologías e índices que evalúen la fauna acuática. Las turberas son diferentes entre sí, y las familias de macroinvertebrados encontrados son tolerantes a las características fisicoquímicas del agua. Es necesario realizar estudios periódicos que evalúen la calidad del agua y su relación con los macroinvertebrados acuáticos para entender la dinámica de las turberas, generar conocimiento e incrementar su protección.

Abstract Introduction: In Costa Rica, high peatbogs are located in the Cordillera de Talamanca from 2 400 to 3 200 m. They are formed from deposits of decomposing organic matter, with reduced oxygen and low nutrient availability. Objective: To evaluate the variation in the composition of aquatic macroinvertebrates according to physicochemical parameters of superficial water quality in high altitude peatbogs, Costa Rica. Methods: 32 artificial substrates were placed in the peatbogs to be colonized by macroinvertebrates. Monthly physicochemical evaluations of surface water were performed in eight peatbogs with monthly visits during the rainy season. The ICA-NSF and BMWP-CR indexes were used to evaluate the water quality. Results: A total of ten families corresponding to seven genera were recorded. The most representative family was Chironomidae and Limnephilidae. Water quality was classified according to the ICA-NSF as "medium quality" and as "regular to poor quality" according to BMWP-CR. Conclusions: The high peatbogs are poorly studied ecosystems; this research shows the need to design methodologies and indices to evaluate the aquatic fauna. The peatbogs are different from each other, and the families of macroinvertebrates found are tolerant to the physicochemical characteristics of the water. Periodic studies that evaluate water quality and its relationship with aquatic macroinvertebrates are necessary to understand the dynamics of peatlands, generate knowledge and increase their protection.

The effects of heating on the physicochemical properties of tricalcium silicate root canal sealers

Abstract This study evaluated the effect of heating on the physicochemical properties and surface changes of tricalcium silicate sealers. Three tricalcium silicate root canal sealers (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer), and one epoxy resin-based sealer (AH Plus; control) were tested. The effect of heating on setting time (ST) and flowability were assessed according to ANSI/ADA 57 and ISO 6876 standards. Solubility and dimensional change (DC) of the set sealers were evaluated at 24 hours and after 30 days; the pH of the water used in the DC testing was also measured. Tests were repeated with heated sealers in an oven at 100 °C for 1 min. SEM and EDS analysis were performed. Data were analyzed using One-Way ANOVA and Tukey post-hoc tests (α=5%). Heating decreased the ST for AH Plus and EndoSequence (p<0.05). Heating reduced flowability (p<0.05) and increased pH for AH Plus (p<0.05). The solubility of Bio-C (dried specimens) was not in accordance with the ANSI/ADA standard. The solubility of EndoSequence was significantly higher (p<0.05) when it was heated and dried after 30 days. DC of Bio-C (24 h and 30 days), BioRoot-RCS (30 days) and AH Plus (24 h and 30 days) were not in accordance with the standards. SEM and EDS analysis showed significant changes in sealer microstructure after heating. In conclusion, heating decreased the ST and increased the solubility of EndoSequence BC sealer. No significant changes in flowability, DC, and pH were identified for all three tricalcium silicate sealers after heat application. However, all sealers had significant surface changes.

Resumo Este estudo avaliou o efeito do aquecimento nas propriedades físico-químicas e nas alterações superficiais de cimentos de silicato tricálcico. Três cimentos endodônticos de silicato tricálcico (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer) e um cimento à base de resina epóxi (AH Plus) foram testados para avaliar o efeito do aquecimento no tempo de presa (TP) e escoamento de acordo com as normas ANSI/ADA 57 e ISO 6876. A solubilidade e alteração dimensional (AD) dos cimentos foram avaliadas após 24 horas e 30 dias. O pH da água usada no teste de AD também foi medido. Os testes foram repetidos com cimentos aquecidos em um forno a 100 °C por 1 min. Análises em MEV e EDS foram realizadas. Os dados foram analisados pelos testes de ANOVA-1 via e post hoc de Tukey (α=5%). O aquecimento diminuiu o TP para AH Plus e EndoSequence (p<0,05). O aquecimento reduziu o escoamento (p<0,05) e aumentou o pH do AH Plus (p<0,05). A solubilidade do Bio-C (amostras desidratadas) não estava de acordo com o padrão ANSI/ADA. A solubilidade da EndoSequence foi significativamente maior (p<0,05) quando aquecida e desidratada após 30 dias. As AD de Bio-C (24 h e 30 dias), BioRoot-RCS (30 dias) e AH Plus (24 h e 30 dias) não estavam de acordo com as normas ADA e ISO. A análise em MEV e EDS mostrou alterações significativas na estrutura dos cimentos após aquecimento. Em conclusão, o aquecimento diminuiu o TP e aumentou a solubilidade do cimento EndoSequence BC. Não foram identificadas mudanças significativas no escoamento, AD e pH para os cimentos de silicato tricálcico após aquecimento. Porém, todos os cimentos tiveram alterações significativas na superfície.

Caracterización de compost de residuos sólidos orgánicos urbanos de seis distritos de la provincia Leoncio Prado, Perú

En Perú, al 2019, solo el 6,4 % de los distritos disponen sus residuos urbanos en rellenos sanitarios, los cuales, están en situación de colapso, lo que exige buscar alternativas para mejorar la gestión de estos residuos y, frente a ello, el compostaje se perfila como una tecnología simple y económica, empleada para el tratamiento del componente orgánico, para reducir daños a la salud y al ambiente, sin embargo, la falta de criterios técnicos en su aplicación está afectando la calidad del compost final. El objetivo de esta investigación fue evaluar los criterios técnicos de procesamiento y la calidad del compost, a través de residuos sólidos urbanos en los distritos de la provincia Leoncio Prado. La investigación identificó los distritos que aplican el compostaje a sus residuos y evaluó la técnica de procesamiento, indicadores fisicoquímicos y determinó la calidad con base en normas técnicas internacionales. Los resultados muestran que seis de diez distritos aplican el compostaje y los indicadores fisicoquímicos contrastados con los criterios de calidad de la norma técnica chilena (NCH 2880), colombiana 5167 y de la OMS, corresponden a compost de calidad intermedia (Clase B). Los compost evaluados no representan riesgo ambiental y pueden ser utilizados como enmienda en la mejora del suelo y los cultivos con algunas restricciones, por presentar valores elevados de humedad, pH y bajos niveles de P, Ca, Mg y K.

At 2019, in Peru, only 6.4 % of the districts dispose of their urban waste in sanitary landfills, which are in a situation of collapse, therefore is needed looking for alternatives to improve the management of this waste, facing this, composting is emerging as a simple and economical technology used for the treatment of the organic component, thus, reducing damage to health and the environment, however, the lack of technical criteria in its application is affecting the quality of the final compost. The objective of this research was to evaluate the technical criteria for processing and the quality of compost based on municipal solid waste in the districts of Leoncio Prado province. The research identified the districts that apply composting to their waste and evaluated the processing technique, physicochemical indicators and determined the quality based on international technical standards. The results show that six out of ten districts apply composting, and the physicochemical indicators contrasted with the quality criteria of the Chilean technical standard (NCH 2880), Colombian 5167 and WHO, correspond to intermediate quality compost (Class B). The evaluated compost does not represent an environmental risk and can be used as an amendment in soil and crop improvement with some restrictions, since it has high moisture, pH and low levels of P, Ca, Mg and K.

Some Quality Attributes of Composite Flour and Bread Produced from Wheat and African Walnut

This study explored the potential of African walnut in the formulation of composite flour which can be used for bread production and in various food applications. African walnut flour was produced and used to substitute wheat flour at different levels (5 - 25%) in the production of wheat-African walnut composite flour. Functional and pasting properties of the composite flour were evaluated using standard procedures. Proximate composition, antioxidant activity, some loaf quality attributes and sensory acceptability of bread produced from the composite flour were evaluated using standard procedures. Wheat bread served as control. The composite flour showed varying functional properties which ranged from 2.43 to 3.46 (swelling capacity), 1.15 to 1.85 mL/g (water absorption capacity), 2.15 to 2.75 mL/g (oil absorption capacity), 10.80 to16.60% (foam capacity), 63.0 to 75.0% (dispersibility), 38.92 to 69.92 seconds (wetability), 0.75 to 0.79 g/mL (packed bulk density) and 0.43 to 0.47 g/mL (loose bulk density). Inclusion of African walnut reduced peak viscosity (53.92 – 148.83 RVU), trough viscosity (52.25 – 88.58 RVU), breakdown viscosity (1.67 – 60.25 RVU), final viscosity (74.08 – 191.25 RVU) and setback viscosity (21.83 – 102.67 RVU) of the composite flour. Composite bread had better protein (9.75 – 16.93%), fat (3.42 – 9.94%), ash (1.46 – 2.75%), crude fibre (0.86 – 3.64%) but reduced specific loaf volume (2.36 – 4.18 cm3/g) and loaf height (3.00 – 5.40cm) than the control, and exhibited appreciable antioxidant activity (DPPH: 31.60 – 73.09% and FRAP: 0.51 - 4.25 mg/g). In term of sensory acceptability composite bread samples produced with 5 and 10 % levels of African walnut compared favourably with bread produced from wheat flour. Thus composite flour produced from wheat and African walnut flours showed an array of physicochemical properties which could make it useful in different food applications. Acceptable bread could be produced from wheat flour substituted with African walnut flour at 10% level.

PHYSICOCHEMICAL AND PHYTOCHEMICAL PROPERTIES OF MARKETED SAMPLE OF HERBAL NUTRACEUTICAL SUPPLEMENTS OF SHATAVARI (ASPARAGUS RACEMOSUS)

Shatavari was called as "Queen of Herb". It improves female reproductive health including hormonal imbalance, dysfunctional uterine bleeding, polycystic ovarian syndrome, follicular growth, oocytes quality and infertility. Shatavari act as galactgogue and also as anti-inflammatory, antimicrobial and immunomodulator for many infectious diseases. The present study was carried out to analyze the physicochemical and phytochemical properties of different forms of Shatavari supplement available in local markets. Three different forms of supplement such as tablet, capsule and powder were chosen by purposive sampling technique. Experimental research design was adopted for the study. Shatavari standard sample was found to have 5.29% of moisture content. The Total ash yield was 3.70%. The percentage of acid insoluble ash was found to be 2.39 and water soluble ash was 1.21%. The water extractives value (45.72%) was considerably higher than alcohol extractive (8.91%). Physicochemical analysis of Tablet, Capsule and Powder divulge the percentage of various parameters moreover similar to standard. The pH value reported that Shatavari was slightly acidic in nature. The phytochemical study revealed the presence of bioactive components like Saponins, Tannins and Glycosides in all forms of samples including standard. The present study reported that the formulation of different forms of Shatavari supplement contains several bioactive components which was essential to consider as an ideal Herbal Nutraceutical supplements. Hence Shatavari - An Herbal Nutraceutical supplement can be suggested to promote overall Health.

Comparative Study of Physico-Chemical Analysis of Changeri Ghrita Prepared with Murchita and Amurchita Ghrita

Changeri ghrita is a medicated ghee formulation, mentioned in Grahani rog chikitsa. Sneha murchana is a procedure prior to Snehapaka. Snehapaka and Murchana bring changes in Sneha. Materials and Methods: Two batches of Changeri ghrita prepared using Murchita and Amurchit ghrita. Prepared Ghrita subjected to physico-chemical analysis. Result and Discussion: Specific gravity increased in Murchita ghrita. Refractive index, viscosity, saponification value, iodine values were increased. While acid value is decreased. Peroxide value is slightly increased. Unsaponifiable matter remains unchanged. There was change in organoleptic properties after Murchana. Physico-chemical changes have been occurring except in unsaponifiable matter and congealing point. Peroxide was present in both samples of Amurchit and Murchit Changeri ghrita. Saponification value was increased in Murchit Changeri Ghrita Conclusion: It can be concluded that antioxidants were added during Murchana. Murchana maintains stability of lipid preparation and offer good health impact, increases palatability.

Physicochemical properties, cytotoxicity and bioactivity of a ready-to-use bioceramic repair material

Abstract The aim of this study was to evaluate the physicochemical properties, cytotoxicity and bioactivity of a ready-to-use bioceramic material, Bio-C Repair (Angelus), in comparison with White MTA (Angelus) and Biodentine (Septodont). The physicochemical properties of setting time, radiopacity, pH, solubility, dimensional and volumetric changes were evaluated. Biocompatibility and bioactivity were assessed in Saos-2 osteoblast cell cultures by the MTT assay 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide), Neutral Red (NR), Alizarin Red (ARS), and cell migration tests. Statistical analysis was performed by ANOVA, Tukey or Bonferroni tests (α = 0.05). Bio-C Repair had the longest setting time (p < 0.05), but radiopacity and solubility were accordance with the ISO 6876/2012 standards, besides linear expansion. Bio-C Repair and MTA had similar volumetric change (p > 0.05); lower than Biodentine (p < 0.05). All the materials evaluated had an alkaline pH. Bio-C Repair was cytocompatible and promoted mineralized nodule deposition in 21 days and cell migration in 3 days. In conclusion, Bio-C Repair had adequate radiopacity above 3mm Al, solubility less than 3%, dimensional expansion, and low volumetric change. In addition, Bio-C Repair promoted an alkaline pH and presented bioactivity and biocompatibility similar to MTA and Biodentine, showing potential for use as a repair material.

Resumo O objetivo deste estudo foi avaliar as propriedades físico-químicas, citotoxicidade e bioatividade de um novo material biocerâmico pronto para uso, Bio-C Repair (Angelus), em comparação com MTA Branco (Angelus) e Biodentine (Septodont). Foram avaliadas as propriedades físico-químicas de tempo de presa, radiopacidade, pH, solubilidade, alterações dimensionais e volumétricas. A biocompatibilidade, bioatividade e capacidade de reparo foram avaliadas em culturas de células de osteoblastos Saos-2 pelo ensaio MTT brometo de 3-(4,5-dimetiltiazol-2-il)-2,5-difeniltetrazólio), vermelho neutro (NR), vermelho de alizarina ( ARS) e testes de migração celular. A análise estatística foi realizada pelos testes ANOVA, Tukey ou Bonferroni (α = 0,05). Bio-C Repair apresentou o maior tempo de presa (p < 0,05), mas radiopacidade e solubilidade de acordo com as normas ISO 6876/2012, além de expansão linear. Bio-C Repair e MTA tiveram variação volumétrica semelhante (p > 0,05), menor que Biodentine (p < 0,05). Todos os materiais avaliados apresentaram pH alcalino. Bio-C Repair foi citocompatível, além de promover deposição de nódulos mineralizados em 21 dias e migração celular em 3 dias. Em conclusão, o Bio-C Repair apresentou radiopacidade adequada acima de 3mmAl, solubilidade menor que 3%, expansão dimensional e baixa perda volumétrica.. Além disso, o Bio-C Repair promoveu um pH alcalino e apresentou bioatividade e biocompatibilidade semelhantes ao MTA e Biodentine, mostrando potencial para uso como material reparador

ADMET, Pharmacokinetic and Docking properties of the fungal drug 2- (2, 4-difluorophenyl)-1, 3-bis (1, 2, 4-triazol-1-yl) propan-2-ol by using Quantum computational methods

The current study contributes to a better knowledge of the FCZ's characteristics and bioactivity. The ADMET properties have been calculated and the results have been illustrated; as a result, it has become quite popular for virtual pharmaceutical analysis. This research aims to examine FCZ’s optimized structure and properties by analyzing various computational calculations. Bond length, Bond angle, Mulliken charges have been analyzed for the studies. The experimental geometrical parameters and theoretical data were compared with ADME parameters, biomarker properties, pH value, drug like nature, Marvin sketch, Swiss ADME to quantify molecular descriptors just as to survey atomic elements. ADMET properties introduce the influence of the drug levels and its kinetics with the tissues of the body. It also explains about the metabolism, toxicity of the drugs when introduced to the system. The analysis on pharmacokinetic properties has helped a lot in the drug development for further studies. The target prediction of FCZ has been studied along with the docking study. Docking study is an important program in order to study about the binding of the small ligand into a receptor like proteins. This method is very useful in drug discovery which provides insights into various studies. This will help in further development of the drugs which will finally help the society in large scale. FCZ helps pharmaceutical industry in developing the drugs to treat chronic disease when combined with other molecules. Hence the present study is really helpful in drug designing and in the development of new drugs.

Simultaneous detection of thirteen exons of dystrophin gene by optimized multiplex PCR assay to screen Duchenne/Becker muscular dystrophy

Advancements in Polymerase Chain Reaction (PCR) technology and other techniques like Deoxyribonucleic acid (DNA)signal and target amplification have become key procedures in molecular diagnostics. PCR enables the synthesis of nucleic acids in vitro through which a DNA segment can be specifically replicated in a semiconservative way that sets forth deletion and mutation analysis. Multiplex PCR (M-PCR) is beneficial over standard and long PCR as this can amplify more than one locus using the respective primer sets. In harmony with this, the present study aimed to optimize M-PCR followed by its chemistry and condition to screen Duchenne Muscular Dystrophy (DMD) [OMIM #310200] and Becker Muscular Dystrophy (BMD) [OMIM #300376]. Muscular Dystrophies (MDs) are a broad group of hereditary, progressive, and degenerative disorders of muscles. X-linked recessive D/BMD are caused by mutation/s in the dystrophin gene [OMIM #300377] that encodes for dystrophin protein [UniProt#P11532]. As dystrophin is the human metagene with 79 exons, mutational analysis is very challenging. Chamberlain set (10 plex), Beggs set (9 Plex), and Kunkel set (7 Plex) is used for many years to diagnose this condition. However, in this study, Beggs set is customized with 13 exons to screen DMD gene mutation in a single reaction. Optimization of M-PCR was designed with many physicochemical parameters. According to the literature and after many appraisals the present study demonstrated the most sufficient concentration of various chemical components and optimal cycling conditions to optimize the modified Beggs set (13 Plex). 50 µL PCR reaction includes primer(s) (0.3–0.5 µM each), dNTP mixture (160 µM each), Dream Taq buffer (1X), Taq DNA polymerase (6U/50 µL), DNA template (250 ng/50 µL), BSA (0.4 µg/µL), and MgCl2 (1.4 mM). To get the most effective results cyclic conditions obtained were 10 min initial denaturation at 94°C, 62°C annealing temperature, and 35 PCR cycles at 72°C extending temperature. Consequently, the study successfully formulated a less expensive and simple approach for >3000 bp that was used to screen D/BMD. Finally, a developed M-PCR mix with a unique combination of specificity and sensitivity coupled with great flexibility has led to a true revolution in molecular diagnostics.

Phytochemical Estimation and Therapeutic Amelioration of Aesculus hippocastanum L. Seeds Ethanolic Extract in Gastric Ulcer in Rats Possibly by Inhibiting Prostaglandin Synthesis / 中国结合医学杂志

OBJECTIVE@#To quantify phytochemicals using liquid chromatography and mass spectroscopy (LCMS) analysis and explore the therapeutic effect of Aesculus hippocastanum L. (AH) seeds ethanolic extract against gastric ulcers in rats.@*METHODS@#Preliminary phytochemical testing and LCMS analysis were performed according to standard methods. For treatment, the animals were divided into 7 groups including normal control, ulcer control, self-healing, AH seeds low and high doses, ranitidine and per se groups. Rats were orally administered with 10 mg/kg of indomethacin, excluding the normal control group (which received 1% carboxy methyl cellulose) and the per se group (received 200 mg/kg AH seeds extract). The test group rats were then given 2 doses of AH seeds extract (100 and 200 mg/kg, respectively), while the standard group was given ranitidine (50 mg/kg). On the 11th day, rats in all groups were sacrificed, and their stomach was isolated to calculate the ulcer index, and other parameters such as blood prostaglandin (PGE2), tissue superoxide dismutase (SOD), catalase (CAT), malonyldialdehyde (MDA), and glutathione (GSH). All isolated stomach tissues were analyzed for histopathological findings.@*RESULTS@#The phytochemical examination shows that the AH seeds contain alkaloids, flavonoids, saponins, phenolic components, and glycosides. LCMS analysis confirms the presence of quercetin and rutin. The AH seeds extract showed significant improvement in gastric mucosa conditions after indomethacin-induced gastric lesions (P<0.01). Further marked improvement in blood PGE2 and antioxidant enzymes, SOD, CAT, MDA and GSH, were observed compared with self-healing and untreated ulcer-induced groups (P<0.01). Histopathology results confirmed that AH seeds extract improved the mucosal layer and gastric epithelial membrane in treated groups compared to untreated ulcer-induced groups.@*CONCLUSIONS@#LCMS report confirms the presence of quercetin and rutin in AH seeds ethanolic extract. The therapeutic effect of AH seeds extract against indomethacin-induced ulcer in rat model indicated the regenerated membrane integrity, with improved cellular functions and mucus thickness. Further, improved antioxidant enzyme level would help to reduce PGE2 biosynthesis.

Preparation, characterization and biocompatibility of calcium peroxide-loaded polycaprolactone microparticles / 浙江大学学报·医学版

OBJECTIVES@#To explore the physicochemical characteristics and biocompatibility of calcium peroxide (CPO)-loaded polycaprolactone (PCL) microparticle.@*METHODS@#The CPO/PCL particles were prepared. The morphology and elemental distribution of CPO, PCL and CPO/PCL particles were observed with scanning electron microscopy and energy dispersive spectroscopy, respectively. Rat adipose mesenchymal stem cells were isolated and treated with different concentrations (0.10%, 0.25%, 0.50%, 1.00%) of CPO or CPO/PCL particles. The mesenchymal stem cells were cultured in normal media or osteogenic differentiation media under the hypoxia/normoxia conditions, and the amount of released O2 and H2O2 after CPO/PCL treatment were detected. The gene expressions of alkaline phosphatase (ALP), Runt-associated transcription factor 2 (RUNX2), osteopontin (OPN) and osteocalcin (OCN) were detected by realtime RT-PCR. SD rats were subcutaneously injected with 1.00% CPO/PCL particles and the pathological changes and infiltration of immune cells were observed with HE staining and immunohistochemistry at day 7 and day 14 after injection.@*RESULTS@#Scanning electron microscope showed that CPO particles had a polygonal structure, PCL particles were in a small spherical plastic particle state, and CPO/PCL particles had a block-like crystal structure. Energy dispersive spectroscopy revealed that PCL particles showed no calcium mapping, while CPO/PCL particles showed obvious and uniform calcium mapping. The concentrations of O2 and H2O2 released by CPO/PCL particles were lower than those of CPO group, and the oxygen release time was longer. The expressions of Alp, Runx2, Ocn and Opn increased with the higher content of CPO/PCL particles under hypoxia in osteogenic differentiation culture and normal culture, and the induction was more obvious under osteogenic differentiation conditions (all P<0.05). HE staining results showed that the muscle tissue fibers around the injection site were scattered and disorderly distributed, with varying sizes and thicknesses at day 7 after particle injection. Significant vascular congestion, widened gaps, mild interstitial congestion, local edema, inflammatory cell infiltration, and large area vacuolization were observed in some tissues of rats. At day 14 after microparticle injection, the muscle tissue around the injection site and the tissue fibers at the microparticle implantation site were arranged neatly, and the gap size was not thickened, the vascular congestion, local inflammatory cell infiltration, and vacuolization were significantly improved compared with those at day 7. The immunohistochemical staining results showed that the expressions of CD3 and CD68 positive cells significantly increased in the surrounding muscle tissue, and were densely distributed in a large area at day 7 after particle injection. At day 14 of microparticle injection, the numbers of CD3 and CD68 positive cells in peripheral muscle tissue and tissue at the site of particle implantation were lower than those at day 7 (all P<0.01).@*CONCLUSIONS@#CPO/PCL particles have good oxygen release activity, low damage to tissue, and excellent biocompatibility.

Microfluidics for nano-drug delivery systems: From fundamentals to industrialization

In recent years, owing to the miniaturization of the fluidic environment, microfluidic technology offers unique opportunities for the implementation of nano drug delivery systems (NDDSs) production processes. Compared with traditional methods, microfluidics improves the controllability and uniformity of NDDSs. The fast mixing and laminar flow properties achieved in the microchannels can tune the physicochemical properties of NDDSs, including particle size, distribution and morphology, resulting in narrow particle size distribution and high drug-loading capacity. The success of lipid nanoparticles encapsulated mRNA vaccines against coronavirus disease 2019 by microfluidics also confirmed its feasibility for scaling up the preparation of NDDSs via parallelization or numbering-up. In this review, we provide a comprehensive summary of microfluidics-based NDDSs, including the fundamentals of microfluidics, microfluidic synthesis of NDDSs, and their industrialization. The challenges of microfluidics-based NDDSs in the current status and the prospects for future development are also discussed. We believe that this review will provide good guidance for microfluidics-based NDDSs.

Impact of photoinitiator quality on chemical-mechanical properties of dental adhesives under different light intensities / Impacto da qualidade de fotoiniciadores nas propriedades químico mecânicas de adesivos dentais sob diferentes intensidades de luz

Objective: Evaluate the mechanical properties of experimental adhesive models with different photoinitiators (PI) polymerized by LED units of different power densities. Material and Methods: Three groups of adhesive models based on HEMA/BisGMA (45/55) were prepared in association with different PI combinations: G2 (control) ­ 2 PI: 0.5% CQ, 0.5% EDMAB; G3 - 3 PI: 0.5% CQ; 0.5% DMAEMA, 0.5% DPIHP; G4 - 4 PI: 0.5% CQ; 0.5% EDMAB; 0.5% DMAEMA; 0.5% DPIHP. The three formulations were polymerized at two different LED power densities: 550 mW/cm2 and 1200 mW/cm2. The degree of conversion (DC) of adhesive monomers was monitored in situ through the FTIR for 600 s. Specimens were prepared for each formulation for analysis mong adhesive systems (G2

Objetivo: Avaliar as propriedades mecânicas de modelos adesivos experimentais com diferentes fotoiniciadores (PI) polimerizados por unidades de LED de diferentes densidades de energia. Material e Métodos: Três grupos de modelos adesivos baseados em HEMA/BisGMA (45/55) foram preparados em associação com diferentes combinações de PI: G2 (controle) ­ 2 PI: 0,5% CQ, 0,5% EDMAB; G3 - 3PI: 0,5% CQ; 0,5% DMAEMA, 0,5% DPIHP; G4 - 4 PI: 0,5% CQ; 0,5% EDMAB; 0,5% DMAEMA; 0,5% DPIHP. As três formulações foram polimerizadas em duas densidades de potência de LED: 550 mW/cm2 e 1200 mW/cm2. O grau de conversão (DC) dos monômeros adesivos foi monitorado in situ através do FTIR durante 600 s. Amostras foram preparadas para cada formulação para análise de resistência à flexão (FS), módulo de elasticidade (ME), sorção (SOR) e solubilidade (SOL). Os dados foram submetidos aos testes ANOVA 2-fatores e Tukey (5%). Resultados: DC: houve diferença significativa entre os sistemas adesivos (G2

The influence of ultrasonic activation on the setting time and flow of four endodontic sealers / A influência da ativação ultrassônica no tempo de ajuste e no fluxo de quatro vedadores endodônticos / La influencia de la activación ultrasónica en el tiempo de ajuste y flujo de cuatro selladores endodónticos

The aim of the present study was to evaluate the influence of ultrasonic activation (UA) on the setting time and flow of four endodontic sealers: AH Plus (AH), Sealer Plus (SP), MTA Fillapex (MTAF), and BioRoot RCS (BIO). Properties were evaluated as required by ANSI/ADA Specification N° 57 (2008); only the size of the specimens was modified. UA was applied using a smooth tapered ultrasonic tip coupled to a piezoelectric ultrasonic device (30% power) on the freshly mixed materials in two cycles of 20 seconds. The results were statistically analyzed using the ANOVA and Kruskal-Wallis tests, followed by the Tukey and Dunn posthoc tests, respectively, depending on the normality of the data. The shortest setting times, initial and final, were, 115 (BIO/UA) and 148.6 (BIO/UA) min, whereas the longest were 1215 (AH) and 1928 (AH) min. The MTAF sealer did not set throughout the experimental period (2880 minutes). Significant differences were observed between BIO and MTAF and the other sealers, with or without UA, both in the initial and final setting time (P < 0.05). UA did not change the initial setting times; however, it reduced the final setting of BIO (P < 0.05). The highest and lowest flow values observed were 25.52 mm (AH/UA) and 18.66 mm (BIO/UA), respectively. The AH sealer, regardless of UA, exhibited higher flow values compared to the other sealers (P < 0.05), except for the MTAF/UA group, which was the only sealer in which UA promoted a significant flow increase (P < 0.05). Under the conditions of the study, it can be concluded that the BIO, under UA, presented the lowest setting time; however, it exhibited the lowest flow values. The MTAF sealer did not reach its final setting. Moreover, the SP groups exhibited intermediate results in all analyses. In summary, only the final setting time of the BIO group and the flow values of the MTAF group were influenced by UA.

O objetivo do presente estudo foi avaliar a influência da ativação ultrassônica (UA) no tempo e fluxo de ajuste de quatro selantes endodônticos: AH Plus (AH), Sealer Plus (SP), MTA Fillapex (MTAF) e BioRoot RCS (BIO). As propriedades foram avaliadas conforme exigido pela Especificação N° 57 (2008) da ANSI/ADA; apenas o tamanho dos espécimes foi modificado. O UA foi aplicado usando uma ponta de ultrassom suave cônica acoplada a um dispositivo ultrassônico piezoelétrico (30% de potência) nos materiais recém-misturados em dois ciclos de 20 segundos. Os resultados foram analisados estatisticamente usando os testes ANOVA e Kruskal-Wallis, seguidos pelos testes póstticos de Tukey e Dunn, respectivamente, dependendo da normalidade dos dados. Os tempos de ajuste mais curtos, iniciais e finais, foram 115 (BIO/UA) e 148,6 (BIO/UA) min, enquanto os mais longos foram 1215 (AH) e 1928 (AH) min. O selador da MTAF não foi colocado durante todo o período experimental (2880 minutos). Foram observadas diferenças significativas entre o BIO e o MTAF e os demais seladores, com ou sem UA, tanto no tempo de ajuste inicial quanto final (P < 0,05). A UA não alterou os tempos de ajuste inicial; no entanto, reduziu o ajuste final da BIO (P < 0,05). Os valores de fluxo mais alto e mais baixo observados foram 25,52 mm (AH/UA) e 18,66 mm (BIO/UA), respectivamente. O selador AH, independentemente do UA, apresentou valores de fluxo mais elevados em comparação com os outros seladores (P < 0,05), exceto para o grupo MTAF/UA, que foi o único selador no qual o UA promoveu um aumento significativo do fluxo (P < 0,05). Nas condições do estudo, pode-se concluir que o BIO, sob UA, apresentou o menor tempo de ajuste; no entanto, exibiu os menores valores de fluxo. O selador MTAF não atingiu seu ajuste final. Além disso, os grupos de SP apresentaram resultados intermediários em todas as análises. Em resumo, apenas o tempo de ajuste final do grupo BIO e os valores de fluxo do grupo MTAF foram influenciados pelo UA.

El objetivo del presente estudio fue evaluar la influencia de la activación ultrasónica (AU) sobre el tiempo de ajuste y flujo de cuatro selladores endodónticos: AH Plus (AH), Sealer Plus (SP), MTA Fillapex (MTAF) y BioRoot RCS (BIO). Las propiedades se evaluaron según lo requerido por la especificación ANSI/ADA N° 57 (2008), sólo se modificó el tamaño de los ejemplares. El AU se aplicó utilizando una punta ultrasónica cónica lisa acoplada a un dispositivo piezoeléctrico ultrasónico (30% de potencia) sobre los materiales recién mezclados en dos ciclos de 20 segundos. Los resultados se analizaron estadísticamente mediante las pruebas ANOVA y Kruskal- Wallis, seguidas de las pruebas postcográficas de Tukey y Dunn, respectivamente, dependiendo de la normalidad de los datos. Los tiempos de fraguado más cortos, inicial y final, fueron 115 (BIO/UA) y 148,6 (BIO/UA) min, mientras que los más largos fueron 1215 (AH) y 1928 (AH) min. El sellador MTAF no se ajustó durante todo el período experimental (2880 minutos). Se observaron diferencias significativas entre BIO y MTAF y los demás selladores, con o sin AU, tanto en el tiempo de ajuste inicial como final (P < 0,05). La AU no modificó los tiempos de ajuste inicial, pero redujo el ajuste final de BIO (P < 0,05). Los valores más altos y más bajos de caudal observados fueron 25,52 mm (AH/UA) y 18,66 mm (BIO/UA), respectivamente. El sellador AH, independientemente del AU, presentó valores de caudal más altos en comparación con los demás selladores (P < 0,05), excepto para el grupo MTAF/AU, que fue el único sellador en el que el AU promovió un incremento significativo del caudal (P < 0,05). Bajo las condiciones del estudio, se puede concluir que el BIO, bajo AU, presentó el menor tiempo de fraguado, sin embargo, presentó los menores valores de caudal. El sellador MTAF no alcanzó su ajuste final. Por otra parte, los grupos SP presentaron resultados intermedios en todos los análisis. En resumen, solo el tiempo de ajuste final del grupo BIO y los valores de flujo del grupo MTAF fueron influenciados por el AU.

Physicochemical and Microbiological Evaluation of Soil and Effluent Contaminated with Azo-Dye in Itoku, Abeoukuta Ogun State, Nigeria

The global industrialization of chemical dyes used for household products has resulted in various dyes leaching into the soil. Azo dye textile contamination could lead to infertile soil. This study investigates the ecological effect of azo textile dye contamination on bacterial biomass, selective pressure, and associated physicochemical changes in soil samples contaminated with textile azo dye in Itoku, Abeokuta, Nigeria. Microbiological and physicochemical changes of the soil and effluent samples collected were determined using standard procedures. Results revealed that the average count of total viable bacteria in the contaminated sampling sites ranged from 0.82±021 x 106 cfu/g to 1.65±0.02 x 106 cfu/g which was significantly lower than the control bacterial counts. The dye contaminated and the control soil samples each contained a heterogenous population of bacteria which included Paenibacillus validus, Bacillus licheniformis, Bacillus niacin, Seratia liquefaciens, Staphylococcus gallinarum, Bacillus subtilis, and Bacillus coagulans. The physicochemical analysis of the soil revealed high levels of pH in the azo dye contaminated soil (10.4–11.1) and electrical conductivity was also highest in the effluent (1250 to 2943 units) compared to the control (430 to 480). Importantly, the control samples were higher in all of the other tested soil parameters including cation exchange, the mean value of the organic matter, water holding capacity, particle density, moisture content, and total porosity. Conclusion- Azo dye contamination caused decreases in bacterial density and many other soil parameters along with higher PH and electrical conductivity which suggests that azo textile dye contaminated soil is unfavorable for agricultural purposes and potentially toxic to the ecosystem.

Microbiological, Physicochemical and Sensory Characterization of Honey, a Natural Healthy Product in Burkina Faso

Honey is a natural product produced by bees from the nectar of flowers. It is a very healthy food whose multiple properties significantly improve health and prevent many diseases. However, some practices can affect its quality, hence the objective of the study was to assess the honey safety from 6 honey-producing regions in Burkina Faso. The physicochemical, microbiological and sensory characteristics were determined using standard methods. The densities ranged from 1.39 to 1.44; the pH, 5.73 to 6.56; the total acidity, 13.00 to 83.00 meq/kg; the Brix degree ranged 86.00 to 88.50%; the moisture,11.86 to 18.83%, the electrical conductivity, 101.00 to 155.00 ?s/cm and the Hydroxymethylfurfural (HMF), from 14.67± 0.00 to 90.52±0.35. Microbiological analysis showed the total counts varied from 1.21.105±1.18.104 to 3.50.103±3.50.103 to 1.21.105 CFU/mL; yeast and mold rates were below 103 CFU/mL, spore contamination is also noted in some honey samples and was between 2.23×101±2.51 to 1.38×102 ±7.63CFU/mL), Salmonella, Shigella and coliform were not detected in the honey samples. Sensory analysis revealed that the organoleptic characteristics of honey varied from one region to another. All the honey was differently appreciated by the tasters.

Microbiological and Nutritional Quality of Complementary Foods for Children (6 to 24 months) Produced in the City of Man (Côte d'Ivoire)

This study aims to determine the microbiological and nutritional quality of complementary foods for children produced in the city of Man (instant flour and porridge). To do this, a structured survey of nannies and vendors, coupled with microbiological and physicochemical analyzes was carried out. To this end, a questionnaire survey was conducted among nannies and porridge sellers in order to collect information on the use of complementary foods and to assess the state of cleanliness of the sales environment. A study of physicochemical (carbohydrates, lipids, humidity, ash, minerals) and microbiological (total aerobic mesophilic flora, yeasts and molds, total coliforms, Escherichia coli, Staphylococcus sp. and Salmonella sp.) characteristics using standard methods and referenced was then conducted to assess the nutritional value and health status of the porridges (Millet, Kokobaka, Anagobaka) and flours from the Focolari center consumed in Man. The survey data showed that the majority of the of nannies (61.1%) give a complementary food before the age of introduction (6 months), with regard to the saleswomen (100%) unaware of the proportion of the components and their nutritional intake as well as 54.8% of them have an unhealthy work place and environment. The microbiological analysis carried out on the 50 samples revealed a potential contamination of spoilage and pathogenic germs. The contamination rate of Anagobaka porridge is very worrying unlike other porridges and flours, especially with the presence of salmonella, the high rate of Escherichia coli and Staphylococcus aureus respectively (3.91×103 ± 0.09 and 5.34×104 ± 0.10 CFU/mL).) Regarding the nutritional analysis, there is a content of carbohydrates (70.17-85.08%), lipids (6.93-10.40%) and iron (30.64-64.34%) higher than those recommended by the FAO/WHO standard in the 6 types of samples analyzed. However, the zinc content is below this standard in all the samples tested. However, zinc deficiency is one of the main causes of stunted growth in children. All these results have shed light on the existence of a potential health risk and possible nutritional deficiencies in infants and young children who consume locally produced complementary foods.

Does the ultrasonic activation of calcium silicate-based sealers affect their physicochemical properties?

Abstract This study aimed to evaluate the influence of ultrasonic activation (UA) on the physicochemical properties of hydraulic calcium silicate-based sealers. Nine experimental conditions were created based on the hydraulic calcium silicate-based sealers (Bio-C Sealer, Sealer Plus BC and Bio Root RCS) and the ultrasonic activation (no activation [NA], 10 seconds, and 20 seconds). Then the experimental groups were BC-NA, BC-10, BC-20, SPBC-NA, SPBC-10, SPBC-20, BR-NA, BR-10, and BR-20. Activation was performed with an ultrasonic insert 20/.01. The mold for the physicochemical analysis was filled and evaluated according to the ANSI/ADA specification nº. 57: initial and final setting time, flow, radiopacity and solubility. Tests were also performed to evaluate pH and calcium ion release with experimental periods of 1, 24, 72, and 168 hours with a pH meter and colorimetric spectrophotometer. Data were analyzed by one-way analysis of variance and post-hoc Tukey tests. The significance level was set at 5%. The time of UA progressively delayed the initial setting time for all hydraulic calcium silicate-based sealers (p < 0.05). Twenty seconds of UA increased the mean flow values of Sealer Plus BC and Bio-C Sealer compared to NA (p < 0.05). UA did not influence the radiopacity and solubility of the tested sealers (p > 0.05). UA for 20 seconds enhanced the pH levels and the calcium ion release of Sealer Plus BC and Bio-C Sealer at 168h (p < 0.05). UA for twenty seconds interferes with some physicochemical properties of hydraulic calcium silicate-based sealers.

Resumo Este estudo teve como objetivo avaliar a influência da ativação ultrassônica nas propriedades físico-químicas de cimentos de silicato de cálcio. Nove condições experimentais foram criadas com base nos cimentos de silicato de cálcio (Bio-C Sealer, Sealer Plus BC e Bio Root RCS) e na ativação ultrassônica (sem ativação [SA], 10 segundos e 20 segundos). Os grupos experimentais foram BC-SA, BC-10, BC-20, SPBC-SA, SPBC-10, SPBC-20, BR-SA, BR-10 e BR-20. A ativação foi realizada com um inserto ultrassônico 20/.01. O molde para a análise físico-química foi preenchido e avaliado de acordo com a especificação ANSI/ADA nº. 57: tempo de presa inicial e final, escoamento, radiopacidade e solubilidade. Também foram realizados testes para avaliação de pH e liberação de íons cálcio com períodos experimentais de 1, 24, 72 e 168 horas com pHmetro e espectrofotômetro colorimétrico. Os dados foram analisados por análise de variância one-way e testes post-hoc de Tukey. O nível de significância foi estabelecido em 5%. O tempo de AU aumentou progressivamente o tempo de presa inicial para todos os cimentos de silicato de cálcio (p < 0,05). Vinte segundos de AU aumentaram os valores médios de escoamento de Sealer Plus BC e Bio-C Sealer em comparação com SA (P < 0,05). A AU não influenciou a radiopacidade e a solubilidade dos cimentos testados (P > 0,05). AU por 20 segundos aumentou os níveis de pH e a liberação de íons cálcio de Sealer Plus BC e Bio-C Sealer em 168h (P < 0,05). AU por vinte segundos interfere em algumas propriedades físico-químicas dos cimentos de silicato de cálcio.