Synthesis, characterization and protection effect of black rice anthocyanins nano-composite against hepatotoxicity induced by methotrexate in rats

Abstract The present study aimed to investigate the beneficial of prepared black rice anthocyanins nano-composite (An-AgNps) against hepatotoxicity induced by methotrexate (MTX) in rats. Anthocyanins nano-composite was prepared by silver as the metallic ion reduction and were characterized by IR and SEM. The rats in our experiment were divided into five groups. Serum lipid profile, serum transaminases (ALT and AST), ALP, LDH, TBA, GSH and SOD were examined. The results show that SEM of An-AgNps has average particle size from 70 to 130nm. In the group treated with MTX; TC, TG, LDL-c, ALT, AST, ALP, LDH and TBA levels were significantly (P0.05) increased than NC, while, HDL-c, SOD and GSH levels were significantly (P0.05) decreased. On the other hand, An-AgNps + MTX treated groups were reversed the levels of all biomarkers similar to NC. In conclusion, the results show that An-AgNps has a protective effect on MTX-induced hepatotoxicity and oxidative stress.

Resumo O presente estudo teve como objetivo investigar o benefício de nanocompósito de antocianinas de arroz preto preparado (An-AgNps) contra a hepatotoxicidade induzida por metotrexato (MTX) em ratos. O nanocompósito de antocianinas foi preparado a partir da prata por meio da redução do íon metálico e caracterizado por IR e SEM. Os ratos em nosso experimento foram divididos em cinco grupos, e foram examinados o perfil lipídico sérico, as transaminases séricas (ALT e AST), ALP, LDH, TBA, GSH e SOD. Os resultados mostram que SEM de An-AgNps tem tamanho médio de partícula de 70 a 130 nm. No grupo tratado com MTX, os níveis de TC, TG, LDL-c, ALT, AST, ALP, LDH e TBA aumentaram significativamente (P 0,05) do que NC, enquanto os níveis de HDL-c, SOD e GSH diminuíram significativamente (P 0,05). Por outro lado, nos grupos tratados com An-AgNps + MTX, foram revertidos os níveis de todos os biomarcadores semelhantes ao NC. Em conclusão, os resultados mostram que o An-AgNps tem um efeito protetor contra a hepatotoxicidade induzida pelo MTX e o estresse oxidativo.

Research progress on brain functional near-infrared spectroscopy technology in the field of neonates / 中国当代儿科杂志

Functional near infrared spectroscopy (fNIRS) is an emerging neuroimaging tool that reflects the activity and function of brain neurons by monitoring changes in brain oxygen metabolism based on the neurovascular coupling mechanism. It is non-invasive and convenient, especially suitable for monitoring neonatal brain function. This article provides a comprehensive review of research related to the developmental patterns of brain networks concerning language, music, and emotions in neonates using fNIRS. It also covers brain network imaging in neonatal care, resting-state brain network connectivity patterns, and characteristics of brain functional imaging in disease states of neonates using fNIRS.

Structural stability of Hib capsular polysaccharide in vaccine manufacturing / 中国生物制品学杂志

@#Objective To evaluate the stability of polyribosylribitol phosphate(PRP),the basic structure of capsular polysaccharide of Haemophilus influenzae type b(Hib),in the preparation of Hib conjugate vaccine.Methods The structures of the prepared Hib polysaccharides,polysaccharide derivatives and protein-conjugated polysaccharides were analyzed by nuclear magnetic resonance spectroscopy(NMR).Results The detection results of the prepared Hib polysaccharides,polysaccharide derivatives and protein-conjugated polysaccharides all met the requirements of relevant standards of Chinese Pharmacopoeia(VolumeⅢ,2020 edition),and the NMR spectra showed no significant change.Conclusion The basic structure PRP of the main carbohydrate antigen of Hib conjugate vaccine had no change during the vaccine manufacturing.

Functional near infrared imaging of college students on speech fluency tasks in traumatized / 中国学校卫生

Objective@#The study aims to explore the neural mechanism of cognitive differences in college students with posttraumatic stress disorder under verbal fluency task based on functional near infrared spectroscopy (fNIRS), so as to provide neuroimaging support for the evaluation, diagnosis and treatment of posttraumatic stress disorder(PTSD).@*Methods@#Posttaumatic Stress Disorder Checklist Combat(PCL-C) was used to screen the subjects, including 21 students in PTSD group (PCL-C≥38) and 30 students in control group from September to Novenber in 2020. A 53 channel near infrared spectroscopy device was used to collect cerebral blood oxygen signals under the verbal fluency task, and correlation analysis, Mann Whitney U test and independent sample t test were performed on the results.@*Results@#The difference in the total average score of PCL-C Scale between PTSD group and the control group(46.38±6.96，25.57±6.09) was statistically significant ( t=11.33, P <0.05). Correlation analysis showed that Avg-HbO in left dorsolateral prefrontal lobe was negatively correlated with PCL-C Score ( r=-0.37, P <0.05). Mann Whitney U test showed that in the left dorsolateral prefrontal lobe (Ch6), the Avg-HbO change in PTSD group [0.19(-0.09, 0.86)mmol/(L〖KG*7〗·mm)] was significantly lower than the control group [0.79( 0.37 , 1.47)mmol/(L ·mm)] ( Z=2.16, P <0.05), which was statistically significant.@*Conclusions@#The degree of PTSD was negatively correlated with the index of oxygenated hemoglobin in the left dorsolateral prefrontal lobe, and the oxygenated hemoglobin content in the PTSD group was lower than that in the normal group. In the future, fNIRS may be used to collect blood oxygen signals from the left dorsolateral prefrontal lobe in cognitive tasks to provide imaging evidence for the identification of PTSD.

Effects of plateau environment on tear indexes and related anatomical structures of rabbits / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To investigate the effects of hypobaric hypoxia in plateau on tear indexes and related anatomical structures in rabbits.METHODS: A total of 18 healthy New Zealand rabbits were selected and randomly divided into plateau group and control group, with 9 rabbits(18 eyes)in each group. The plateau group was housed in the Simulated Climate Cabin for Special Environment of Northwest of China, simulating hypobaric hypoxia at an altitude of 6 000 m. The control group was housed in a clean animal room with atmospheric pressure and oxygen. Changes in the tear meniscus height and non-invasive tear break-up time were detected by using RHCT-1 corneal topographer dry eye comprehensive analysis system, changes in tear secretion was measured by Schirmer Ⅰ test, before intervention and on the 3, 7 d, 2 and 4 wk. Meanwhile, the changes in tear composition before and after intervention in the plateau environment were analyzed using Raman Spectroscopy. The histopathological changes of the lower lid conjunctiva, cornea, lacrimal gland, and Hardarian gland were observed by hematoxylin-eosin(HE)staining after 4 wk of intervention, and the expression of mucin 5AC(MUC5AC)in conjunctiva was detected by immunohistochemistry.RESULTS: Compared with the control group, Schirmer Ⅰ test, tear meniscus height, first and average non-invasive tear break-up time in the plateau group decreased significantly since 3 d, and the difference was significant with the extension of observation time(P&#x003C;0.05). The above indexes increased from 2 wk. After 4 wk of intervention, the protein and lipid content of the tear composition of rabbits in the plateau group increased, and the nucleic acid content decreased compared with the pre-intervention period. Compared with the control group, rabbits in the plateau group showed thickening of corneal stromal edema, an increase in the number of conjunctival cup cells, increase in the level of expression of MUC5AC, an increase in the level of expression of MUC5AC, an atrophy and flattening of cytoplasm in lacrimal epithelial cells, an enlargement of glandular lumen, and no obvious destructive changes in the Hardarian glands.CONCLUSION: Acute plateau environment can destroy the homeostasis of rabbit ocular surface, so that the tear secretion and the tear film stability decreases, but within a certain period of time, rabbits undergo compensation with the habituation to the hypobaric hypoxia environment, which can increase the tear secretion to a certain extent and restore the tear film stability.

Salivary Metabolites in Patients with Mucopolysaccharidosis

ABSTRACT Objective: To identify the salivary metabolites profile of Mucopolysaccharidosis (MPS) types I, II, IV, and VI patients. Material and Methods: The participants were asked to refrain from eating and drinking for one hour before sampling, performed between 7:30 and 9:00 a.m. Samples were centrifuged at 10.000 × g for 60 min at 4°C, and the supernatants (500µl) were stored at −80°C until NMR analysis. The salivary proton nuclear magnetic resonance (1H-NMR) spectra were acquired in a 500 MHz spectrometer, and TOCSY experiments were used to confirm and assign metabolites. Data were analyzed descriptively. Results: Differences in salivary metabolites were found among MPS types and the control, such as lactate, propionate, alanine, and N-acetyl sugar. Understanding these metabolite changes may contribute to precision medicine and early detection of mucopolysaccharidosis and its monitoring. Conclusion: The composition of low molecular weight salivary metabolites of mucopolysaccharidosis subjects may present specific features compared to healthy controls.

Direct spectrofluorimetric methods as alternatives to compendial ones used for the quality control of biopharmaceuticals: development, validation and application

Abstract A simple, rapid, precise, accurate and sustainable spectrofluorimetric method (SFM) was developed, validated and applied for the determination of 4-aminobenzoic acid and aromatic amino acids (phenylalanine, tryptophan and tyrosine). These compounds are used in biopharmaceutical formulations and therefore must be analyzed by quality control laboratories to meet the criteria established in pharmacopoeias. In general, potentiometric titration (PT) is described in the compendia as the official analytical technique. However, this method showed low sensitivity and selectivity, and moreover was performed with a non-aqueous solvent (acetic acid), which led to higher consumption of reagents and consequently to the formation of residues. Therefore, the SFM was developed in aqueous medium at pH 7.2 using phosphate buffer. It was successfully validated according to the ICH guidelines and showed good linearity range (r>0.999), specificity, accuracy and precision (within and between days) and robustness. The test results were compared between the SFM and PT using raw material samples, while according to the F- and t-tests at 95% confidence level, no statistical difference was found between the methods.

Quantitative determination of selected heavy metals and micronutrients in branded dairy products sold in Nigeria using atomic absorption spectroscopy (AAS)

Quantitative analysis of heavy metals and nutrients in food helps indicate the safety and quality of food for final consumers. The present study was conducted to assess the presence of heavy metals (arsenic, copper, mercury, chromium, and lead) and the nutritional value of calcium in branded milk and yogurt to evaluate health risks for consumers. Ten (10) samples of branded milk and dairy products manufactured in Nigeria were purchased. The metal contents of the samples were determined using atomic absorption spectroscopy. The concentrations of calcium in the milk samples were between 9.33 ± 0.0023 and 18 ± 0.0071 ppm and were detected in all samples. Arsenic concentrations ranged from 0.45 ± 0.00042 to 2.48 ± 0.00064 ppm in eight branded samples but were undetected in two samples. Chromium levels were undetected in most samples, except for two with concentrations of 0.12±0.00049 ppm and 0.23±0.00021 ppm, respectively. Copper ranged from 0.032±0.00021 ppm to 0.129±0.00021 ppm in six samples. Mercury levels were detected in six samples at a concentration of 1.0±1.0 ppm. Lead concentrations ranged from 0.15±0.00064 to 0.29±0.00028 ppm in three samples. The study found heavy metals above the ideal concentration in branded milk and dairy products in Nigeria, highlighting the need for quality control measures during production to prevent contamination.

Analysis of pH, calcium ion release, and energy dispersive spectroscopy of a bioceramic root canal dressing

Abstract This study compared the pH and calcium ion release of calcium silicate- (Bio-C Temp) and calcium hydroxide-based (Ultracal XS) medications. Intracanal remnants of both medications were also evaluated using SEM-EDS after the removal protocol. Thirty-five bovine teeth were prepared. Fifteen were filled with Bio-C Temp and 15 with Ultracal XS. Five remained without intracanal medication (control group). Five samples from each experimental time (i.e.. 24, 72, and 168 hours) were used to measure pH and calcium ions release using a digital pH meter and microplate reader, respectively. Afterward, the peaks of the chemical elements composing both medications were analyzed in SEM-EDS. One-way ANOVA and Tukey's post hoc test analyzed the pH and calcium ion release data. Student's t-test compared the medications in each experimental time. SEM-EDS described the percentage of chemical elements in the samples. Bio-C Temp and Ultracal XS showed a significant pH increase from 24 to 168 hours (p<0.05). Ultracal XS showed a higher pH value at 24 hours than Bio-C Temp (p<0.05) but were similar at 72 and 168h (p > 0.05). Calcium ion release did not depend on the experimental period (p > 0.05). Bio-C Temp showed lower calcium ions release than Ultracal XS at 24 hours (p<0.05). SEM-EDS analyses showed the remains of both medications, but the concentration of Si, Al, and W ions was present only in the calcium silicate-based medication. Bio-C Temp presented alkaline pH and a satisfactory calcium ion release over the time. The remaining of both medications were present after the protocols for paste removal.

Resumo Este estudo comparou o pH e a liberação de íons cálcio de medicações intracanais a à base de silicato de cálcio (Bio-C Temp) e à base de hidróxido de cálcio (Ultracal XS). Remanescentes de ambas as medicações também foram avaliados usando microscopia eletrônica de varredura e espectroscopia de dispersão de energia após o protocolo de remoção. Trinta e cinco dentes bovinos foram preparados. Quinze dentes foram preenchidos com Bio-C Temp e 15 com Ultracal XS. Cinco permaneceram sem medicação intracanal (grupo controle). Cinco amostras de cada tempo experimental (ou seja, 24, 72 e 168 horas) foram usadas para medir o pH e a liberação de íons de cálcio usando um medidor de pH digital e um leitor de microplacas, respectivamente. Em seguida, os picos dos elementos químicos que compõem os dois medicamentos foram analisados ​​em microscopia eletrônica de varredura e por espectroscopia de dispersão de energia. Os testes One-way ANOVA e post hoc de Tukey analisaram os dados de pH e liberação de íons cálcio. O teste t de Student comparou as medicações em cada tempo experimental. A microscopia eletrônica de varredura e a espectroscopia de dispersão de energia descreveu a porcentagem de elementos químicos nas amostras. O Bio-C Temp e o Ultracal XS mostraram um aumento significativo de pH de 24 a 168 horas (p<0,05). O Ultracal XS apresentou um valor de pH mais alto em 24 horas do que o Bio-C Temp (p<0,05), mas foi semelhante em 72 e 168h (p > 0,05). A liberação de íons cálcio não dependeu do período experimental (p> 0,05). O Bio-C Temp apresentou menor liberação de íons de cálcio do que Ultracal XS em 24 horas (p<0,05). As análises de microscopia eletrônica de varredura e espectroscopia de dispersão de energia mostraram remanescentes de ambas as medicações, mas a concentração de íons Si, Al e W estavam presentes apenas na medicação à base de silicato de cálcio. O Bio-C Temp apresentou pH alcalino e maior liberação de íons cálcio. Remanescentes de ambas as medicações estiveram presentes após os protocolos de remoção da pasta.

The luminous transmittance of the quartz-glass fiber posts is superior to glass fiber posts / Superioridade da transmitância luminosa dos pinos de fibra de quartzo

ABSTRACT Fiber-reinforced prefabricated intraarticular posts have gained popularity due to several favorable characteristics for clinical use compared to metallic intraradicular posts. Aim: To evaluate the light transmission capacity of two types of fiber posts, using two different methods. Materials and Method: The posts were divided into two groups: experimental group - quartz-glass fiber posts (n=10) and control group - glass fiber posts (n=10). The light transmittance of the samples was compared by means of light intensity test by photographs and ultraviolet-visible spectrophotometer. This test was analyzed by thirds: coronal, middle, and apical. The spectophotometer tested the luminous transmittance along the length of the post. The statistical analysis was conducted with a significance level of 0.05. Results: Light transmission was 97% on the coronal third, 68% in the middle third, and 27.66% in the apical third in the posts of the experimental group. In the posts of the control group, the light transmission was 95.33% in the coronal third, 80.66% in the middle third, and 41.33% in the apical third. Light transmission was significantly higher in the middle third of the posts of the experimental group when compared to the control group (p<0.05). The luminous transmittance of the posts of the experimental group was 97.4% with wavelengths of 400 nm, 97% at 450 and 500 nm, and 96.9% at 550 nm. In the posts of the control group, the luminous transmittance was 72.3% with wavelengths of 400 nm, 68.6% at 450 nm; 64.6% at 500 nm and 61.5% at 550 nm. The posts of the experimental group demonstrated significantly higher light transmittance than the control group (p<0.001). Conclusion: the luminous transmittance of quartz-glass fiber posts is higher than glass fiber posts.

RESUMO Os pinos intra-articulares pré-fabricados reforçados com fibras têm ganhado popularidade devido a várias características favoráveis ao uso clínico em comparação com os pinos intra-radiculares metálicos). Objetivo: Avaliar a capacidade de transmissão de luz de dois tipos de pinos de fibra, usando dois métodos diferentes. Materiais e Método: Os pinos foram divididos em dois grupos: grupo experimental - pinos de fibra de vidro de quartzo e grupo controle - pinos de fibra de vidro. A transmitância de luz das amostras foi comparada por meio de teste de intensidade de luz por fotografias e espectrofotômetro ultravioleta-visível. Este teste foi analisado por terços: coronal, médio e apical. O espectrofotômetro testou a transmitância luminosa ao longo do comprimento do pino. A análise estatística foi realizada com nível de significância de 0,05. Resultados: A transmissão luminosa foi de 97% no terço coronal, 68% no terço médio e 27,66% no terço apical nos pinos do grupo experimental. Nos pinos do grupo controle, a transmissão de luz foi de 95,33% no terço coronal, 80,66% no terço médio e 41,33% no terço apical. A transmissão luminosa foi significativamente maior no terço médio dos pinos do grupo experimental quando comparado ao grupo controle (p<0,05). A transmitância luminosa dos pinos do grupo experimental foi de 97,4% com comprimento de onda de 400 nm, 97% em 450 e 500 nm e 96,9% em 550 nm. Nos postes do grupo controle, a transmitância luminosa foi de 72,3% com comprimento de onda de 400 nm, 68,6% em 450 nm; 64,6% a 500 nm e 61,5% a 550 nm. Os pinos do grupo experimental demonstraram transmitância de luz significativamente maior do que o grupo controle (p<0,001). Conclusão: a transmitância luminosa dos pinos de fibra de vidro de quartzo é maior do que pinos de fibra de vidro.

Use of Extracorporeal Membrane Oxygenation and Cerebral Oximetry in a Stage 1 Norwood Repair for Hypoplastic Left Heart Syndrome

The role of extracorporeal membrane oxygenation (ECMO) and its indications in stage I Norwood palliation are controversial. The decision to initiate ECMO and its timing remains difficult with no definitive cut?off points or evidence?based guidelines. It varies on a case?to?case basis. We report a case where the use of ECMO was beneficial after stage I Norwood palliation with severe ventricular dysfunction. The systemic?to?pulmonary artery shunt was kept open to balance the systemic and pulmonary circulations. Cerebral oximetry can be useful as an additional monitoring modality to guide management, monitor cerebral perfusion, and help detect cerebral steal.

Validación de un modelo para la estimación del contenido de agua del suelo mediante espectroscopía en el infrarrojo cercano

El monitoreo del contenido de humedad en el suelo es especialmente importante, ya que proporciona información relevante para tomar decisiones acertadas, en cuanto a riego, fertirriego y manejo del estrés hídrico. Este trabajo tiene como objetivo validar un modelo de estimación del contenido de agua en el suelo, mediante espectroscopía de reflectancia difusa en el rango del infrarrojo cercano. Los suelos evaluados provienen de los municipios de Puerto Gaitán (Meta), Espinal (Tolima) y Mosquera (Cundinamarca). En los dos primeros se establecieron redes rígidas, para seleccionar los puntos de muestreo y empleando dos profundidades en cada caso (0-10 y 10-30; 0-10 y 10-25 cm, respectivamente). Para el tercero, se describieron 77 calicatas y se tomaron muestras a 0-10 y 10-35 cm de profundidad. Posteriormente, se evaluó el contenido de humedad considerando 0, 15 y 30 % de humedad. Los datos obtenidos se analizaron con estadística descriptiva. Se empleó la validación cruzada y externa para cada modelo y se obtuvo un modelo general, a partir de los datos de los tres sitios. Los modelos obtenidos para cada sitio de muestreo y el modelo general tienen buena capacidad predictiva. Según los resultados, se afirma que la espectroscopía de reflectancia difusa NIR es una excelente opción para determinar el contenido de agua en el suelo. De igual manera, a partir del análisis de componentes principales, se identificó una diferenciación entre contenidos de agua de los suelos estudiados.

Monitoring soil moisture content is especially important as it provides relevant information for making informed decisions regarding irrigation, fertigation, and water stress management. This study aims to validate a model for estimating soil water content using diffuse reflectance spectroscopy in the near-infrared range. The evaluated soils come from the municipalities of Puerto Gaitán (Meta), Espinal (Tolima), and Mosquera (Cundinamarca). In the first two municipalities, rigid networks were established to select sampling points, with two depths considered for each case (0-10 and 10-30 cm; 0-10 and 10-25 cm, respectively). For the third municipality, 77 soil pits were described, and samples were taken at depths of 0-10 and 10-35 cm. Subsequently, moisture content was evaluated at 0, 15, and 30 % moisture levels. The obtained data were analyzed using descriptive statistics. Cross-validation and external validation were applied to each model, and a general model was developed based on the data from all three sites. The obtained models for each sampling site and the general model demonstrated good predictive capacity. Based on the results, it is affirmed that near-infrared diffuse reflectance spectroscopy is an excellent option for determining soil water content. Similarly, principal component analysis identified differentiation between water contents of the studied soils.

Fabricación y caracterización de pozos cuánticos para el estudio de la interacción luz-materia / Fabrication and characterization of quantum wells for the study of light-matter interaction

RESUMEN Los pozos cuánticos representan la base de una gran variedad de dispositivos electrónicos, entre ellos los ledes, láseres, fotodetectores y moduladores. Las propiedades optoelectrónicas de estos sistemas dependen de su composición química y del espesor de las capas crecidas. Por dicha razón, es necesario tener un control preciso durante su crecimiento. El presente trabajo tuvo como objetivo inducir el crecimiento epitaxial de pozos cuánticos intrínsecos (sin ningún dopaje) asimétricos acoplados y desacoplados de AlGaAs/ GaAs/AlGaAs, así como, establecer su caracterización mediante técnicas de espectroscopía óptica, como lo son la reflectancia diferencial, también conocida como espectroscopía de reflectancia anisotrópica (RAS) y la fotoluminiscencia (PL). Se realizó un estudio experimental de las interacciones entre niveles de energía en los pozos cuánticos asimétricos acoplados. Este tipo de estructuras son especialmente interesantes por permitir la formación y observación, no solo de excitones directos, dentro del mismo pozo, sino también, de excitones y triones indirectos, que se forman entre electrones de un pozo y huecos de otro pozo vecino (Transiciones intra-QW). Se hicieron crecer tres pozos intrínsecos, basados en arseniuro de galio (GaAs): un pozo individual (desacoplado) y un par de pozos asimétricos acoplados, a través de epitaxia por haces moleculares (MBE). Se observó el efecto del rompimiento de simetría (de D2d a C2v) en las propiedades espintrónicas de la estructura, a través de PL y RAS, a una temperatura de ~ 30 K. Se lograron establecer las técnicas y métodos necesarios para el crecimiento de pozos cuánticos intrínsecos, que constituyen la base para la creación de dispositivos y estructuras más complejas. El uso de técnicas espectroscópicas permitió demostrar la presencia de anisotropías ópticas, que repercuten en el comportamiento del espín de los excitones en pozos cuánticos.

ABSTRACT Quantum Wells are the basis for a great variety of electronic devices such as leds, lasers, photodetectors and modulators. Their optoelectronic properties depend on their chemical composition and the thickness of each layer. Therefore, a precise control during their growth is needed. This work has the objective of presenting the epitaxial growth of coupled and uncoupled asymmetric AlGaAs/GaAs/AlGaAs quantum wells and their characterization using optical techniques such as reflectance anisotropy spectroscopy (RAS) and photoluminescence (PL). An experimental study of the different interactions between the confined levels of energy in coupled quantum wells was carried on. This kind of structures is of special interest because they allow the formation and observation not only of direct excitons and trions inside a single quantum well, but of indirect excitons and trions, which are only formed by electrons of one quantum well and holes of the neighbor quantum well (IntraQW transitions). Three intrinsic quantum wells based on gallium arsenide (GaAs) were grown by molecular beam epitaxy (MBE), one single QW and a pair of coupled asymmetric QWs. The effect of breaking symmetry (from de D2d a C2v) on the spintronic properties of the structure was observed by RAS and PL measurements at ~ 30 K. The main techniques and methods for the growth of intrinsic quantum wells were established, which are the basis for the creation of devices with more complex structures. The use of spectroscopic techniques for the study of quantum wells allowed the demonstration of the presence of optical anisotropies that influence the behavior of exciton's spins at quantum wells.

Structural and Rheological Properties of Exopolysaccharides Produced by Some Lactic Acid Bacterial Strains Isolated from Palm Wine

Aims: This study evaluated the physical, chemical and rheological properties of exopolysaccharides (EPSs) produced by Lactic Acid Bacteria (LAB) isolated from palm wine. Materials and Methods: EPSs from palm wine LAB strains were produced on 6% sucrose broth, purified and freeze-dried prior to analyses. Molecular weights (MW), rheological and structural composition (functional groups) of the EPSs were determined using standard methods and Fourier transform infrared spectroscopy (FTIR). Results: The average MW of the EPSs ranged from 2.02×106 to 6.53×106 Da while the flow index (n) values ranged from 0.03-3.13 at 0.2%, 0.06-1.51 at 0.4%, 0.38 - 1.85 at 0.6%, 0.14 - 2.26 at 0.8% and 0.55 - 6.42 at 1% concentrations at elevated temperatures for EPS solutions from the ten LAB species. The FTIR spectrum revealed prominent peaks of various groups of OH (3420 cm-1) and CH3 bending (2090 cm-1) in all the EPSs corresponding to both hydroxyl and amine groups, and aliphatic C-H bonds, respectively. EPS synthesized by Leuconostoc lactis, Lactococcus lactis subsp lactis and Lactiplantibacillus plantarum showed weak absorption peaks (1148 – 1145 cm-1) indicating the C-O-C and C-O bonds, while absorption peaks of Lactobacillus lactis, Lactobacillus acidophilus and Lactiplantibacillus plantarum (1267 – 1253 cm-1) indicated O- acetyl ester and other non-sugar components. Conclusions: The FTIR spectra, rheological properties and molecular weight of EPSs synthesized by the ten LAB strains indicated potentials that could be exploited in different industrial applications, and as stabilizers in food industries

Depth of cure, mechanical properties and morphology of dual-cure bulk-Fill composites / Profundidad de curado, propiedades mecánicas y morfología de resinas compuestas duales

This study evaluated selected structural and physical properties, such as degree of conversion (DC), Vickers hardness (VHN), and compression strength (CS), of three new dual-cure bulk-fill resin-based composites (RBCs; ACTIVA, HyperFIL, and Fill-Up) and compared them to those of a conventional RBC (Filtek Z250) at three clinically relevant depths. Samples (n=180) were prepared in three depths (2,4, and 6mm). Fourier-transform infrared spectroscopy (FTIR) analysis and VHN and CS tests were performed. The DC value was calculated by considering the relative change in the aliphatic C=C peaks. The fractured surfaces of representative samples were characterized using scanning electron microscopy (SEM). Data were statistically evaluated using two-way analysis of variance and post hoc Bonferroni tests (p<0.05). According to the VHN results, Filtek Z250 showed the highest bottom/top hardness ratio (97.94±1.01) at 2mm thickness and ACTIVA showed the lowest bottom/top hardness ratio (43.48±5.64) at 6mm thickness (p<0.001). According to the FTIR results, the DC decreased with increasing thickness in all materials (p<0.05). Filtek Z250 showed the highest (301±12.4 MPa) and ACTIVA exhibited the lowest (232±17.2 MPa) CS values at 2mm thickness (p<0.05). The lowest CS values were obtained for ACTIVA, and the highest values were obtained for Filtek Z250 for samples with thicknesses of 4 and 6mm, respectively (p<0.05). The structural features of restorative composites, such as the resin chemistry and filler type and content, and the operational parameters (i.e., material thickness and curing conditions) strongly affect crosslinking reactions and thus the DC, VHN, and CS values.

Este estudio evaluó propiedades físicas y estructurales, como el grado de conversión (DC), la dureza Vickers (VHN) y la resistencia a la compresión (CS), de tres nuevos compósitos a base de resina de curado dual tipo bulk (RBC; ACTIVA , HyperFIL y Fill-Up) y los comparó con los de una resina compuesta convencional (Filtek Z250) en tres profundidades clínicamente relevantes. Se prepararon muestras (n=180) en tres profundidades (2,4 y 6mm). Se realizaron análisis de espectroscopia infrarroja por transformada de Fourier (FTIR) y pruebas VHN y CS. El valor de DC se calculó considerando el cambio relativo en los picos alifáticos C=C. Las superficies fracturadas de muestras representativas se caracterizaron mediante microscopía electrónica de barrido (MEB). Los datos se evaluaron estadísticamente mediante análisis de varianza de dos vías y pruebas post hoc de Bonferroni (p<0,05). De acuerdo con los resultados de VHN, Filtek Z250 mostró la relación de dureza inferior/superior más alta (97,94±1,01) con un espesor de 2mm y ACTIVA mostró la relación de dureza inferior/superior más baja (43,48±5,64) con un espesor de 6mm (p<0,001). De acuerdo con los resultados de FTIR, la DC disminuyó al aumentar el espesor en todos los materiales (p<0,05). Filtek Z250 mostró los valores de CS más altos (301±12,4 MPa) y ACTIVA los más bajos (232±17,2 MPa) a 2mm de espesor (p<0,05). Los valores más bajos de CS se obtuvieron para ACTIVA y los valores más altos para Filtek Z250 para muestras con espesores de 4 y 6mm, respectivamente (p<0,05). Las características estructurales de las resinas compuestas de restauración, como la química; además del tipo y contenido del relleno, y los parámetros operativos (es decir, el espesor del material y las condiciones de curado) afectan en gran medida las reacciones de interacción química y, por lo tanto, los valores de DC, VHN y CS.

Effect of experimental bleaching gels with polymers Natrosol and Aristoflex on the enamel surface properties

Abstract Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.

Resumo Os polímeros Natrosol e Aristoflex® AVC são amplamente utilizados na indústria cosmética e foram recentemente aplicados como uma opção de espessante na composição de géis de clareamento dental, com o objetivo de reduzir os efeitos adversos sobre os componentes minerais do esmalte. O objetivo deste estudo foi avaliar a variação de cor (ΔE*ab, ΔE00, ∆WID), rugosidade da superfície (Ra), e quantificação do conteúdo mineral (Raman Spectroscopy) do esmalte dentário após clareamento dental com gel experimental baseado em 10% de peróxido de carbamida (CP), contendo Carbopol, Natrosol e Aristoflex® AVC. Sessenta dentes bovinos foram divididos aleatoriamente em 6 grupos (n=10): Controle Negativo (CN) - sem tratamento; Controle Positivo (CP) - Brancura Perfeita 10% - FGM; CP com Carbopol (CPc); CP com Natrosol (CPn); CP com Aristoflex® AVC (CPa); NCP - sem espessante. Os dados foram analisados e modelos lineares generalizados (∆WID -T0 x T1) foram usados para medições repetidas no tempo para Ra e com um fator de estudo para ΔE*ab e ΔE00. Para a avaliação do conteúdo mineral, os dados foram submetidos a testes unidirecionais de ANOVA e Tukey. Para a análise da superfície topográfica do esmalte, o Microscópio Eletrônico de Varredura (SEM) foi realizado. Um nível de significância de 5% foi considerado. ΔE*ab e ΔE00 foram significativamente maiores para os grupos CPc, CPn, CPa e NCP. (∆WID) mostrou uma média significativamente menor do que os outros grupos para NC em T1. Após o clareamento (aplicação diária de 4 horas por 14 dias), Ra foi maior nos grupos CPc, CPn e PC. Para CPa, Ra não foi alterado. Nenhuma diferença significativa foi encontrada na quantificação do conteúdo mineral. O CPa preservou a suavidade da superfície de forma mais eficaz. Aristoflex® AVC é uma opção viável para aplicação como espessante em géis de clareamento dental, apresentando desempenho satisfatório e mantendo a eficácia clareadora do gel, com a vantagem de preservar a rugosidade da superfície do esmalte dentário sem perda significativa de conteúdo mineral.

Culture of rat mesenchymal stem cells on PHBV-PCL scaffolds: analysis of conditioned culture medium by FT Raman spectroscopy / Cultivo de células-tronco mesenquimais de rato sobre arcabouços de PHBV-PCL: análise do meio de cultura condicionado por espectroscopia de FT-Raman

Mesenchymal stem cells (MSCs) have great potential for application in cell therapy and tissue engineering procedures because of their plasticity and capacity to differentiate into different cell types. Given the widespread use of MSCs, it is necessary to better understand some properties related to osteogenic differentiation, particularly those linked to biomaterials used in tissue engineering. The aim of this study was to develop an analysis method using FT-Raman spectroscopy for the identification and quantification of biochemical components present in conditioned culture media derived from MSCs with or without induction of osteogenic differentiation. All experiments were performed between passages 3 and 5. For this analysis, MSCs were cultured on scaffolds composed of bioresorbable poly(hydroxybutyrate co-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL) polymers. MSCs (GIBCO®) were inoculated onto the pure polymers and 75:25 PHBV/PCL blend (dense and porous samples). The plate itself was used as control. The cells were maintained in DMEM (with low glucose) containing GlutaMAX® and 10% FBS at 37ºC with 5% CO2 for 21 days. The conditioned culture media were collected and analyzed to probe for functional groups, as well as possible molecular variations associated with cell differentiation and metabolism. The method permitted to identify functional groups of specific molecules in the conditioned medium such as cholesterol, phosphatidylinositol, triglycerides, beta-subunit polypeptides, amide regions and hydrogen bonds of proteins, in addition to DNA expression. In the present study, FT-Raman spectroscopy exhibited limited resolution since different molecules can express similar or even the same stretching vibrations, a fact that makes analysis difficult. There were no variations in the readings between the samples studied. In conclusion, FT-Raman spectroscopy did not meet expectations under the conditions studied.

As células-tronco mesenquimais (MSCs) possuem grande potencial para aplicação em procedimentos terapêuticos ligados a terapia celular e engenharia de tecidos, considerando-se a plasticidade e capacidade de formação em diferentes tipos celulares por elas. Dada a abrangência no emprego das MSCs, há necessidade de se compreender melhor algumas propriedades relacionadas à diferenciação osteogênica, particularmente liga à biomateriais usados em engenharia de tecidos. Este projeto objetiva o desenvolvimento de uma metodologia de análise empregando-se a FT-Raman para identificação e quantificação de componentes bioquímicos presentes em meios de cultura condicionados por MSCs, com ou sem indução à diferenciação osteogênica. Todos os experimentos foram realizados entre as passagens 3 e 5. Para essas análises, as MSCs foram cultivadas sobre arcabouços de polímeros biorreabsorvíveis de poli (hidroxibutirato-co-hidroxivalerato) (PHBV) e o poli (ε-caprolactona) (PCL). As MSCs (GIBCO®) foram inoculadas nos polímeros puros e na mistura 75:25 de PHBV / PCL (amostras densas e porosas). As células foram mantidas em DMEM (com baixa glicose) contendo GlutaMAX® e 10% de SFB a 37oC com 5% de CO2 por 21 dias. A própria placa foi usada como controle. Os meios de cultura condicionados foram coletados e analisadas em FT-Raman para sondagem de grupos funcionais, bem como possíveis variações moleculares associadas com a diferenciação e metabolismo celular. Foi possível discernir grupos funcionais de moléculas específicas no meio condicionado, como colesterol, fosfatidilinositol, triglicerídeos, forma Beta de polipeptídeos, regiões de amida e ligações de hidrogênio de proteínas, além da expressão de DNA. Na presente avaliação, a FT-Raman apresentou como uma técnica de resolução limitada, uma vez que modos vibracionais de estiramento próximos ou mesmo iguais podem ser expressos por moléculas diferente, dificultando a [...].

Culture of rat mesenchymal stem cells on PHBV-PCL scaffolds: analysis of conditioned culture medium by FT-Raman spectroscopy

Abstract Mesenchymal stem cells (MSCs) have great potential for application in cell therapy and tissue engineering procedures because of their plasticity and capacity to differentiate into different cell types. Given the widespread use of MSCs, it is necessary to better understand some properties related to osteogenic differentiation, particularly those linked to biomaterials used in tissue engineering. The aim of this study was to develop an analysis method using FT-Raman spectroscopy for the identification and quantification of biochemical components present in conditioned culture media derived from MSCs with or without induction of osteogenic differentiation. All experiments were performed between passages 3 and 5. For this analysis, MSCs were cultured on scaffolds composed of bioresorbable poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(-caprolactone) (PCL) polymers. MSCs (GIBCO®) were inoculated onto the pure polymers and 75:25 PHBV/PCL blend (dense and porous samples). The plate itself was used as control. The cells were maintained in DMEM (with low glucose) containing GlutaMAX® and 10% FBS at 37oC with 5% CO2 for 21 days. The conditioned culture media were collected and analyzed to probe for functional groups, as well as possible molecular variations associated with cell differentiation and metabolism. The method permitted to identify functional groups of specific molecules in the conditioned medium such as cholesterol, phosphatidylinositol, triglycerides, beta-subunit polypeptides, amide regions and hydrogen bonds of proteins, in addition to DNA expression. In the present study, FT-Raman spectroscopy exhibited limited resolution since different molecules can express similar or even the same stretching vibrations, a fact that makes analysis difficult. There were no variations in the readings between the samples studied. In conclusion, FT-Raman spectroscopy did not meet expectations under the conditions studied.

Resumo As células-tronco mesenquimais (MSCs) possuem grande potencial para aplicação em procedimentos terapêuticos ligados a terapia celular e engenharia de tecidos, considerando-se a plasticidade e capacidade de formação em diferentes tipos celulares por elas. Dada a abrangência no emprego das MSCs, há necessidade de se compreender melhor algumas propriedades relacionadas à diferenciação osteogênica, particularmente liga à biomateriais usados em engenharia de tecidos. Este projeto objetiva o desenvolvimento de uma metodologia de análise empregando-se a FT-Raman para identificação e quantificação de componentes bioquímicos presentes em meios de cultura condicionados por MSCs, com ou sem indução à diferenciação osteogênica. Todos os experimentos foram realizados entre as passagens 3 e 5. Para essas análises, as MSCs foram cultivadas sobre arcabouços de polímeros biorreabsorvíveis de poli (hidroxibutirato-co-hidroxivalerato) (PHBV) e o poli (-caprolactona) (PCL). As MSCs (GIBCO®) foram inoculadas nos polímeros puros e na mistura 75:25 de PHBV / PCL (amostras densas e porosas). As células foram mantidas em DMEM (com baixa glicose) contendo GlutaMAX® e 10% de SFB a 37oC com 5% de CO2 por 21 dias. A própria placa foi usada como controle. Os meios de cultura condicionados foram coletados e analisadas em FT-Raman para sondagem de grupos funcionais, bem como possíveis variações moleculares associadas com a diferenciação e metabolismo celular. Foi possível discernir grupos funcionais de moléculas específicas no meio condicionado, como colesterol, fosfatidilinositol, triglicerídeos, forma Beta de polipeptídeos, regiões de amida e ligações de hidrogênio de proteínas, além da expressão de DNA. Na presente avaliação, a FT-Raman apresentou como uma técnica de resolução limitada, uma vez que modos vibracionais de estiramento próximos ou mesmo iguais podem ser expressos por moléculas diferente, dificultando a análise. Não houve variações nas leituras entre as amostras estudadas, concluindo-se que a FT-Raman não atendeu às expectativas nas condições estudadas.

Forensic Pathological Diagnosis of Acute and Old Myocardial Infarction Using Fourier Transform Infrared Spectroscopy / 法医学杂志

OBJECTIVES@#Fourier transform infrared spectroscopy (FTIR) was used to analyze myocardial infarction tissues at different stages of pathological change to achieve the forensic pathology diagnosis of acute and old myocardial infarction.@*METHODS@#FTIR spectra data of early ischemic myocardium, necrotic myocardium, and myocardial fibrous tissue in the left ventricular anterior wall of the sudden death group of atherosclerotic heart disease and the myocardium of the normal control group were collected using hematoxylin-eosin (HE) and immunohistochemistry (IHC) staining as a reference, and the data were analyzed using multivariate statistical analysis.@*RESULTS@#The mean normalized spectra of control myocardium, early ischemic myocardium and necrotic myocardium were relatively similar, but the mean second derivative spectra were significantly different. The peak intensity of secondary structure of proteins in early ischemic myocardium was significantly higher than in other types of myocardium, and the peak intensity of the α-helix in necrotic myocardium was the lowest. The peaks of amide Ⅰ and amide Ⅱ in the mean normalized spectra of myocardial fibrous tissue significantly shifted towards higher wave numbers, the peak intensities of amide Ⅱ and amide Ⅲ were higher than those of other types of myocardium, and the peak intensities at 1 338, 1 284, 1 238 and 1 204 cm-1 in the mean second derivative spectra were significantly enhanced. Principal component analysis (PCA) and partial least square-discriminant analysis (PLS-DA) showed that FTIR could distinguish different types of myocardium.@*CONCLUSIONS@#FTIR technique has the potential to diagnose acute and old myocardial infarction, and provides a new basis for the analysis of the causes of sudden cardiac death.