Construction of multi-enzyme cascade reactions and its application in the synthesis of bifunctional chemicals / 生物工程学报

The synthesis of fine chemicals using multi-enzyme cascade reactions is a recent hot research topic in the field of biocatalysis. The traditional chemical synthesis methods were replaced by constructing in vitro multi-enzyme cascades, then the green synthesis of a variety of bifunctional chemicals can be achieved. This article summarizes the construction strategies of different types of multi-enzyme cascade reactions and their characteristics. In addition, the general methods for recruiting enzymes used in cascade reactions, as well as the regeneration of coenzyme such as NAD(P)H or ATP and their application in multi-enzyme cascade reactions are summarized. Finally, we illustrate the application of multi-enzyme cascades in the synthesis of six bifunctional chemicals, including ω-amino fatty acids, alkyl lactams, α, ω-dicarboxylic acids, α, ω-diamines, α, ω-diols, and ω-amino alcohols.

Synthesis and application of the methyl analogues of S-adenosyl-L-methionine / 生物工程学报

Methylation plays a vital role in biological systems. SAM (S-adenosyl-L-methionine), an abundant cofactor in life, acts as a methyl donor in most biological methylation reactions. SAM-dependent methyltransferases (MTase) transfer a methyl group from SAM to substrates, thereby altering their physicochemical properties or biological activities. In recent years, many SAM analogues with alternative methyl substituents have been synthesized and applied to methyltransferases that specifically transfer different groups to the substrates. These include functional groups for labeling experiments and novel alkyl modifications. This review summarizes the recent progress in the synthesis and application of SAM methyl analogues and prospects for future research directions in this field.

Development of enzyme immobilization systems for CO2 bioconversion: advances and challenges / 生物工程学报

Enzyme-catalyzed CO2 reduction to value-added commodities is important for alleviating the global environmental issues and energy crises due to high selectivity and mild conditions. Owing to high energy density, formic acid or methanol produced from CO2 using formate dehydrogenase (FDH) or multi-enzyme cascades are promising target chemicals for CO2 utilization. However, the low activity, poor stability and low reusability of key enzymes involved in such process hampered its large-scale application. Enzyme immobilization provides an effective solution to these problems and significant progress have been made in immobilization carriers. Moreover, integration of enzyme immobilization with other catalysis techniques have been explored extensively. This review summarized the recent advances in the immobilization of enzymes using membranes, inorganic materials, metal-organic frameworks, covalent organic frameworks and other carriers, and illustrated the characteristics and advantages of different immobilization materials and immobilization methods. The synergistic effects and applications of immobilized enzymes and electrocatalytic or photocatalytic coupling reaction systems for CO2 reduction were further summarized. Finally, the current challenges of enzyme immobilization technology and coupling reaction systems were pointed out and their development prospects were presented.

Advances in enzymatic production of L-homophenylalanine / 生物工程学报

L-homophenylalanine (L-HPA) is an important non-natural amino acid that has been used as a key intermediate for the synthesis of Puli drugs for the treatment of hypertension. At present, L-HPA is synthesized using chemical methods, which has the disadvantages of expensive raw materials, tedious steps and serious pollution. Therefore, researchers have conducted in-depth research on the enzymatic production of L-HPA. This review summarizes the research progress on the enzymatic synthesis of L-HPA, including the dehydrogenase process, the transaminase process, the hydantoinase process, and the decarboxylase process, with the hope to facilitate the industrial production of L-HPA.

Research progress on application of multi-enzyme-catalyzed cascade reactions in enzymatic synthesis of natural products / 中国中药杂志

As a biocatalyst, enzyme has the advantages of high catalytic efficiency, strong reaction selectivity, specific target products, mild reaction conditions, and environmental friendliness, and serves as an important tool for the synthesis of complex organic molecules. With the continuous development of gene sequencing technology, molecular biology, genetic manipulation, and other technologies, the diversity of enzymes increases steadily and the reactions that can be catalyzed are also gradually diversified. In the process of enzyme-catalyzed synthesis, the majority of common enzymatic reactions can be achieved by single enzyme catalysis, while many complex reactions often require the participation of two or more enzymes. Therefore, the combination of multiple enzymes together to construct the multi-enzyme cascade reactions has become a research hotspot in the field of biochemistry. Nowadays, the biosynthetic pathways of more natural products with complex structures have been clarified, and secondary metabolic enzymes with novel catalytic activities have been identified, discovered, and combined in enzymatic synthesis of natural/unnatural molecules with diverse structures. This study summarized a series of examples of multi-enzyme-catalyzed cascades and highlighted the application of cascade catalysis methods in the synthesis of carbohydrates, nucleosides, flavonoids, terpenes, alkaloids, and chiral molecules. Furthermore, the existing problems and solutions of multi-enzyme-catalyzed cascade method were discussed, and the future development direction was prospected.

Advances in enzyme immobilization based on hierarchical porous metal-organic frameworks / 生物工程学报

As an excellent hosting matrices for enzyme immobilization, metal-organic framework (MOFs) provides superior physical and chemical protection for biocatalytic reactions. In recent years, the hierarchical porous metal-organic frameworks (HP-MOFs) have shown great potential in enzyme immobilization due to their flexible structural advantages. To date, a variety of HP-MOFs with intrinsic or defective porous have been developed for the immobilization of enzymes. The catalytic activity, stability and reusability of enzyme@HP-MOFs composites are significantly enhanced. This review systematically summarized the strategies for developing enzyme@HP-MOFs composites. In addition, the latest applications of enzyme@HP-MOFs composites in catalytic synthesis, biosensing and biomedicine were described. Moreover, the challenges and opportunities in this field were discussed and envisioned.

Cloning, expression and characterization of L-arabinose isomerisefrom thermophilic Anoxybacillus kestanbolensis AC26Sari strain:Bioconversation of L-arabinose to L-ribulose

L-Arabinose isomerase (L-AI) is a pivotal enzyme in the microbial pentose phosphate pathway. It is considered as asignificant biological catalyst in rare sugar production. This enzyme can isomerize L-arabinose into L-ribulose and alsoD-galactose into D-tagatose. Here, we cloned the araA gene encoding L-arabinose isomerase from Anoxybacilluskestanbolensis AC26Sari strain, sequenced and over-expressed in E. coli BL21 (DE3): pLysS. This gene is involved inL-arabinose operon in A. kestanbolensis AC26Sari. DNA sequence analysis revealed an open reading frame of 1,506 bp,capable of encoding a polypeptide of 502 amino acid residues with calculated molecular weight of 55.6776 kDa. Therecombinant was purified by heat treatment and Ni-HisTaq chromatography. The purified enzyme showed maximal activityat pH 8.5 and 65ºC and required divalent cations such as Co2+ and Mn2+ for its activity and thermostability. The apparent Kmvalue of the enzyme for L-arabinose was 6.5 mM (Vmax, 140.1002 U/mg) as determined in the precence of both 1 mM Co2+and Mn2+.

Molecular engineering of transketolase from Escherichia coli and tartaric semialdehyde biosynthesis / 生物工程学报

Transketolase (EC 2.2.1.1, TK) is a thiamine diphosphate-dependent enzyme that catalyzes the transfer of a two-carbon hydroxyacetyl unit with reversible C-C bond cleavage and formation. It is widely used in the production of chemicals, drug precursors, and asymmetric synthesis by cascade enzyme catalysis. In this paper, the activity of transketolase TKTA from Escherichia coli K12 on non-phosphorylated substrates was enhanced through site-directed saturation mutation and combined mutation. On this basis, the synthesis of tartaric semialdehyde was explored. The results showed that the optimal reaction temperature and pH of TKTA_M (R358I/H461S/R520Q) were 32 ℃ and 7.0, respectively. The specific activity on d-glyceraldehyde was (6.57±0.14) U/mg, which was 9.25 times higher than that of the wild type ((0.71±0.02) U/mg). Based on the characterization of TKTA_M, tartaric acid semialdehyde was synthesized with 50 mmol/L 5-keto-d-gluconate and 50 mmol/L non-phosphorylated ethanolaldehyde. The final yield of tartaric acid semialdehyde was 3.71 g with a molar conversion rate of 55.34%. Hence, the results may facilitate the preparation of l-(+)-tartaric acid from biomass, and provide an example for transketolase-catalyzed non-phosphorylated substrates.

In vivo self-aggregation and efficient preparation of recombinant lichenase based on ferritin / 生物工程学报

Enzyme separation, purification, immobilization, and catalytic performance improvement have been the research hotspots and frontiers as well as the challenges in the field of biocatalysis. Thus, the development of novel methods for enzyme purification, immobilization, and improvement of their catalytic performance and storage are of great significance. Herein, ferritin was fused with the lichenase gene to achieve the purpose. The results showed that the fused gene was highly expressed in the cells of host strains, and that the resulted fusion proteins could self-aggregate into carrier-free active immobilized enzymes in vivo. Through low-speed centrifugation, the purity of the enzymes was up to > 90%, and the activity recovery was 61.1%. The activity of the enzymes after storage for 608 h was higher than the initial activity. After being used for 10 cycles, it still maintained 50.0% of the original activity. The insoluble active lichenase aggregates could spontaneously dissolve back into the buffer and formed the soluble polymeric lichenases with the diameter of about 12 nm. The specific activity of them was 12.09 times that of the free lichenase, while the catalytic efficiency was 7.11 times and the half-life at 50 ℃ was improved 11.09 folds. The results prove that the ferritin can be a versatile tag to trigger target enzyme self-aggregation and oligomerization in vivo, which can simplify the preparation of the target enzymes, improve their catalysis performance, and facilitate their storage.

Substitutability of metal-binding sites in an alcohol dehydrogenase / 生物工程学报

Covalently anchoring of a ligand/metal via polar amino acid side chain(s) is often observed in metalloenzyme, while the substitutability of metal-binding sites remains elusive. In this study, we utilized a zinc-dependent alcohol dehydrogenase from Thermoanaerobacter brockii (TbSADH) as a model enzyme, analyzed the sequence conservation of the three residues Cys37, His59, and Asp150 that bind the zinc ion, and constructed the mutant library. After experimental validation, three out of 224 clones, which showed comparative conversion and ee values as the wild-type enzyme in the asymmetric reduction of the model substrate tetrahydrofuran-3-one, were screened out. The results reveal that the metal-binding sites in TbSADH are substitutable without tradeoff in activity and stereoselectivity, which lay a foundation for designing ADH-catalyzed new reactions via metal ion replacement.

Characterization of the affinity-tags-regulated (S)-carbonyl reductase 2 towards 2-hydroxyacetophenone reduction / 生物工程学报

The influence of different affinity tags on enzyme characteristics varies. The (S)-carbonyl reductase 2 (SCR2) from Candida parapsilosis can reduce 2-hydroxyacetophenone, which is a valuable prochiral ketones. Different affinity tags, i.e. his-tag, strep-tag and MBP-tag, were attached to the N terminus of SCR2. These tagged SCR2 enzymes, i.e. his6-SCR2, strep-SCR2 and MBP-SCR2, were heterologously expressed in Escherichia coli and purified to study their characteristics towards 2-hydroxyacetophenone reduction. Affinity tags did affect the characteristics of the recombinant SCR2 enzymes. Specifically, affinity tags affect the stability of recombinant SCR2 enzymes: 1) At pH 6.0, the remaining enzyme activities of his6-SCR2 and strep-SCR2 were only 95.2% and 90.0% of the untagged SCR2, while that of MBP-SCR2 was 1.2 times of the untagged SCR2 after incubating for 13 h at 30 °C. 2) The half-life of MBP-SCR2 at 50 °C was 26.6%-48.8% longer than those of strep-SCR2, his6-SCR2 and untagged SCR2. 3) The kcat of MBP-SCR2 was about 1.25-1.45 times of that of small affinity-tagged and untagged SCR2 after storing at -80 °C for 60 d. Structural informatics indicated that the α-helices at the C terminus of MBP-SCR2 contributed to the stability of the N terminus of fusion protein of SCR2. Data from circular dichroism showed that the MBP-tag has some influence on the secondary structure of SCR2, while melting temperature analysis demonstrated that the Tm of the recombinant MBP-SCR2 was about 5 °C higher than that of the untagged SCR2. This study obtained an efficient and stable recombinant SCR2, i.e. the MBP-SCR2. Moreover, this study could serve as a reference for other researchers to evaluate and select appropriate affinity tags for their research.

Efficient cascade biosynthesis of (S)-2-hydroxybutyric acid / 生物工程学报

2-Hydroxybutyric acid (2-HBA) is an important intermediate for synthesizing biodegradable materials and various medicines. Chemically synthesized racemized 2-HBA requires deracemization to obtain optically pure enantiomers for industrial application. In this study, we designed a cascade biosynthesis system in Escherichia coli BL21 by coexpressing L-threonine deaminase (TD), NAD-dependent L-lactate dehydrogenase (LDH) and formate dehydrogenase (FDH) for production of optically pure (S)-2-HBA from bulk chemical L-threonine (L-Thr). To coordinate the production rate and the consumption rate of the intermediate 2-oxobutyric acid in the multi-enzyme cascade catalytic reactions, we explored promoter engineering to regulate the expression levels of TD and FDH, and developed a recombinant strain P21285FDH-T7V7827 with a tunable system to achieve a coordinated multi-enzyme expression. The recombinant strain P21285FDH-T7V7827 was able to efficiently produce (S)-2-HBA with the highest titer of 143 g/L and a molar yield of 97% achieved within 16 hours. This titer was approximately 1.83 times than that of the highest yield reported to date, showing great potential for industrial application. Our results indicated that constructing a multi-enzyme-coordinated expression system in a single cell significantly contributed to the biosynthesis of hydroxyl acids.

Enzyme ancestral sequence reconstruction and directed evolution / 生物工程学报

The amino acid sequence of ancestral enzymes from extinct organisms can be deduced through in silico approach termed ancestral sequence reconstruction (ASR). ASR usually has six steps, which are the collection of nucleic acid/amino acid sequences of modern enzymes, multiple sequence alignment, phylogenetic tree construction, computational deduction of ancestral enzyme sequence, gene cloning, and characterization of enzyme properties. This method is widely used to study the adaptation and evolution mechanism of molecules to the changing environmental conditions on planetary time scale. As enzymes play key roles in biocatalysis, this method has become a powerful method for studying the relationship among the sequence, structure, and function of enzymes. Notably, most of the ancestral enzymes show better temperature stability and mutation stability, making them ideal protein scaffolds for further directed evolution. This article summarizes the computer algorithms, applications, and commonly used computer software of ASR, and discusses the potential application in directed evolution of enzymes.

Advances of enzymes in the applications of disease treatment and drug preparation / 生物工程学报

The development of biotechnology and the in-depth research on disease mechanisms have led to increased application of enzymes in the treatment of diseases. In addition, enzymes have shown great potential in drug manufacturing, particularly in production of non-natural organic compounds, due to the advantages of mild reaction conditions, high catalytic efficiency, high specificity, high selectivity and few side reactions. Moreover, the application of genetic engineering, chemical modification of enzymes and immobilization technologies have further improved the function of enzymes. This review summarized the advances of using enzymes as drugs for disease treatment or as catalysts for drug manufacturing, followed by discussing challenges, potential solutions and future perspectives on the application of enzymes in the medical and pharmaceutical field.

Enzymatic synthesis of acylated quercetin 3-O-glycosides: a review / 生物工程学报

Quercetin 3-O-glycosides (Q3Gs) are important members of quercetin glycosides with excellent pharmacological activities such as anti-oxidation, anti-inflammation, anti-cancer and anti-virus. Two representatives of Q3Gs, rutin and troxerutin, have been developed into clinical drugs, demonstrating Q3Gs have become one of the important sources of innovative drugs. However, the applications of Q3Gs in food and pharmaceutical industries are hampered by its poor bioavailability. Of the known means, selective acylation modification of Q3Gs through enzymatic catalysis to obtain Q3G esters is one of the effective ways to improve its bioavailability. Herein, the enzyme-mediated acylation of Q3Gs were reviewed in details, focusing on the four tool enzymes (acyltransferases, lipases, proteases and esterases) and the whole-cell mediated biotransformation, as well as the effect of acylations on the biological activities of Q3Gs. Furthermore, the highly efficient synthesis and diversification of acylated site for Q3G esters were also discussed. Taken together, this review provides a new perspective for further structural modifications of Q3Gs towards drug development.

Structure, function and application of serine carboxypeptidase-like acyltransferases from plants / 生物工程学报

Plant serine carboxypeptidase-like acyltransferases (SCPL-AT) have similar structural characteristics and high homology compared to the serine carboxypeptidase. They can transfer the acyl from acyl glucose esters to many natural products, participate in the acylation modification of plant secondary metabolites, enrich the structural diversity of natural products, and improve the physicochemical properties such as water solubility and stability of compounds. This review summarizes the structural characteristics, catalytic mechanism, functional characterization, and biocatalytic applications of SCPL-AT from plants. This will help to promote the functional characterization of these acyltransferase genes and the biosynthesis of useful plant secondary metabolites by synthetic biotechnology.

Synthesis of L-2-aminobutyric acid by leucine dehydrogenase coupling with an NADH regeneration system / 生物工程学报

In this study, Escherichia coli BL21 (DE3) was used as the host to construct 2 recombinant E. coli strains that co-expressed leucine dehydrogenase (LDH, Bacillus cereus)/formate dehydrogenase (FDH, Ancylobacter aquaticus), or leucine dehydrogenase (LDH, Bacillus cereus)/alcohol dehydrogenase (ADH, Rhodococcus), respectively. L-2-aminobutyric acid was then synthesized by L-threonine deaminase (L-TD) with LDH-FDH or LDH-ADH by coupling with two different NADH regeneration systems. LDH-FDH process and LDH-ADH process were optimized and compared with each other. The optimum reaction pH of LDH-FDH process was 7.5, and the optimum reaction temperature was 35 °C. After 28 h, the concentration of L-2-aminobutyric acid was 161.8 g/L with a yield of 97%, when adding L-threonine in batches for controlling 2-ketobutyric acid concentration less than 15 g/L and using 50 g/L ammonium formate, 0.3 g/L NAD+, 10% LDH-FDH crude enzyme solution (V/V) and 7 500 U/L L-TD. The optimum reaction pH of LDH-ADH process was 8.0, and the optimum reaction temperature was 35 °C. After 24 h, the concentration of L-2-aminobutyric acid was 119.6 g/L with a yield of 98%, when adding L-threonine and isopropanol (1.2 times of L-threonine) in batches for controlling 2-ketobutyric acid concentration less than 15 g/L, removing acetone in time and using 0.3 g/L NAD⁺, 10% LDH-ADH crude enzyme solution (V/V) and 7 500 U/L L-TD. The process and results used in this paper provide a reference for the industrialization of L-2-aminobutyric acid.

Research progress on the puerarin derivatization through biocatalysis / 药学学报

Puerarin, also known as daidzein 8-C-glucoside, is a major isoflavone glycoside from Pueraria lobata. Puerarin has been shown to possess a variety of pharmacological activities. It has been widely used for the treatment of cardiovascular and cerebrovascular diseases. However, the further applications are limited due to its low water solubility and poor bioavailability. Structural modification is thus regarded as an efficient approach to improve the solubility and bioavailability of puerarin. Unlike chemical modifications, enzyme-assisted modifications, namely biocatalysis, is a promising alternative for the regioselective synthesis of puerarin derivatives due to its high selectivity. Up to date, acylation, glycosylation and hydroxylation of puerarin had been achieved through enzyme-based biocatalysis. Diverse active puerarin derivatives with improved solubility and bioavailability have been thus developed. Based on modification groups, this paper focused on the progress in the preparation of puerarin derivatives by biocatalysis, in which the whole-cells or pure enzymes were used as the biocatalysts. This article was expected to provide new ideas for the synthesis and development of puerarin drugs.

Research progress of Pictet-Spenglerases / 生物工程学报

Pictet-Spenglerases (P-Sases) catalyze the Pictet-Spengler (P-S) reactions and exhibit high stereoselectivity and regioselectivity under mild conditions. The typical P-S reaction refers to the condensation and recyclization of β-arylethylamine with aldehyde or ketone under acidic conditions to form tetrahydroisoquinoline and β-carboline alkaloid derivatives. The related enzymatic products of P-Sases are the backbones of various bioactive compounds, including clinical drugs: morphine, noscapine, quinine, berberine, ajmaline, morphine. Furthermore, the activity of P-Sases in stereoselective and regioselective catalysis is also valuable for chemoenzymatic synthesis. Therefore, this review summarizes the research progress in the discovery, functional identification, biological characteristics and catalytic applications of P-Sases, which provide the useful theoretical reference in future P-Sases research and development.

Structure-function relationships of industrial enzymes / 生物工程学报

Industrial enzymes are the "chip" of modern bio-industries, supporting tens- and hundreds-fold of downstream industries development. Elucidating the relationships between enzyme structures and functions is fundamental for industrial applications. Recently, with the advanced developments of protein crystallization and computational simulation technologies, the structure-function relationships have been extensively studied, making the rational design and de novo design become possible. This paper reviews the progress of structure-function relationships of industrial enzymes and applications, and address future developments.