Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Adicionar filtros








Intervalo de ano
1.
Chinese Journal of Tissue Engineering Research ; (53): 5303-5308, 2013.
Artigo em Chinês | WPRIM | ID: wpr-433715

RESUMO

BACKGROUND:White spot lesions caused by enamel demineralization are a common side effect of orthodontic treatment. Resin infiltration treatment for white spot lesions has obtained favorable effects, but there is no report on the difference between resin infiltration and fluoride varnish treatment for post-orthodontic white spot lesions. OBJECTIVE:To compare the efficiency of resin infiltration and fluride varnish for treatment of post-orthodontic white spot lesions. METHODS:Twenty-nine patients with post-orthodontic white spot lesions were randomly divided into two groups:one group accepted the resin infiltration treatment and the other group accepted fluoride varnish treatment. Frontal intraoral photos before treatment and 6 months after treatment were col ected for study. The difference in efficiency of resin infiltration and fluride varnish for treatment of post-orthodontic white spot lesion was analyzed and evaluated by both dentists and College students who were not engaged in oral medicine. RESULTS AND CONCLUSION:Except one patient treated with fluride varnish, al the patients completed the referral on schedule. There was significant improvement in the two groups after treatment (P<0.05). Resin infiltration treatment was better than fluoride varnish treatment in post-orthodontic white spot lesions. Thus, resin infiltration that requires fewer referrals and has better effects is an ideal therapy for post-orthodontic white spot lesions.

2.
Chinese Journal of Tissue Engineering Research ; (53): 4593-4608, 2013.
Artigo em Chinês | WPRIM | ID: wpr-433622

RESUMO

10.3969/j.issn.2095-4344.2013.25.005

3.
Chinese Journal of Tissue Engineering Research ; (53): 4609-4615, 2013.
Artigo em Chinês | WPRIM | ID: wpr-433621

RESUMO

10.3969/j.issn.2095-4344.2013.25.007

4.
Chinese Journal of Tissue Engineering Research ; (53): 6097-6102, 2013.
Artigo em Chinês | WPRIM | ID: wpr-437484

RESUMO

BACKGROUND:Recombinant bovine basic fibroblast growth factor is a manifold effect cytokine which can promote angiogenesis, wound healing, tissue repair and bone regeneration. Recombinant bovine basic fibroblast growth factor with good histocompatibility is easy to operate and has been widely used in oral and maxil ary surgery. OBJECTIVE:To evaluate the effect of recombinant bovine basic fibroblast growth factor against dry socket syndrome after tooth extraction. METHODS:A total of 160 patients who had been extracted mandibular third molar were selected and randomly divided into two groups. In the experimental group, recombinant bovine basic fibroblast growth factor was put into the sockets after mandibular third molars were extracted, while in the control group, we let the wounds to be healed natural y without any materials. The incidence of dry socket syndrome was observed and compared between two groups at 3 days, 5 days and 1 week after tooth extraction. RESULTS AND CONCLUSION:One patient had dry socket after operation in the experimental group, and the incidence was 1.25%. In the control group, 10 patients suffered from dry socket, and the incidence was 12.5%. There was a significant difference in the incidence of dry socket between the two groups (P<0.01). There was visible granulation tissue within the tooth socket after tooth extraction in the experimental group, and extraction sockets narrowed and were fil ed with granulation tissues, which was 1-2 days earlier than the control group. No al ergies, tissue hyperplasia and other local and systemic reactions occurred in patients receiving implantation of recombinant bovine basic fibroblast growth factor gel. These findings indicate that local implantation of recombinant bovine basic fibroblast growth factor gel after mandibular tooth extractions can speed up the healing of dental extraction wounds.

5.
Chinese Journal of Tissue Engineering Research ; (53): 6089-6096, 2013.
Artigo em Chinês | WPRIM | ID: wpr-437441

RESUMO

BACKGROUND:Fol owing physicochemical treatment and high-temperature calcinations, heterogeneous biological bone becomes a ceramic-like heterologous bone forming a similar structure to the human bone that is a natural network pore structure, which is conducive to seed cel adhesion and proliferation. OBJECTIVE:To observe the feasibility of constructing tissue-engineered bone through combination of sintered bone and bone marrow mesenchymal stem cel s to repair alveolar defects. METHODS:Sheep bone marrow mesenchymal stem cel s as seed cel s were combined with the high temperature sintered bone as scaffold materials to construct tissue-engineered bone. Under general anesthesia, sheep bilateral mandibular first premolars were removed in batches, the alveolar ridge space between the distal root and mesial root of the second premolar to form a bone defect area of 5 mm×5 mm×5 mm. Twelve experimental sheep were equal y randomized into tissue-engineered bone group and sintered bone group, which were implanted with tissue-engineered bone and sintered bone, respectively, at the left surgical area of the mandible. The right surgical area was considered as blank control group. RESULTS AND CONCLUSION:After high-temperature calcinations, the sintered bone was chalk in color, exhibiting a porous structure as the natural cancel ous bone. The porosity was (66.10±1.32)%, and the pore size was between 137.44μm and 538.72μm. After 24 hours of bone marrow mesenchymal stem cel s inoculated to the sintered bone, a large number of cel s are visible adherent to the scaffold;up to day 7, extracel ular matrix was secreted and there was no clear boundary between the cel s and the matrix. X-ray films showed that the tissue-engineered bone and pure sintered bone implants were embedded in the surgical area, and there was a low-density shadow at the edge of the sintered bone. Hematoxylin-eosin staining showed bone trabecular formation at the experimental side, but no obvious bone formation at the control ed side. Tissue-engineered bone prepared by bone marrow mesenchymal stem cel s and sintered bone can better repair sheep alveolar bone defects, which is an ideal seed cel and scaffold material for smal range bone defects.

6.
Chinese Journal of Tissue Engineering Research ; (53): 5290-5295, 2013.
Artigo em Chinês | WPRIM | ID: wpr-435538

RESUMO

BACKGROUND:Periodontal tissue engineering technology provides new ideas and new ways for periodontitis-induced bone defect repair. OBJECTIVE:To develop a culture model for the periodontal ligament cells of miniature swine, which was constructed with hydroxyapatite, to investigate the biocompatibility with hydroxyapatite. METHODS:Periodontal ligament cells from miniature swine were harvested by using tissue explant method. Immunofluorescence was used to detect the expression of stromal cel antigen 1 in the periodontal ligament cells of miniature swine. The third passage cells were co-cultured with a three-dimension hydroxyapatite scaffold, and the biological characteristics of the cells were observed under a scanning electron microscope at days 1, 3, 7 of co-culture. RESULTS AND CONCLUSION:The pirmary miniature swine periodontal ligament cells grew wel , and they were positive for stromal cel antigen 1. Under the scanning electron microscope, the periodontal ligament cells of miniature swine grew wel on the hydroxyapatite scaffold at days 1, 3, 7 of co-culture. These prove that the miniature swine periodontal ligament cells, which can be separated using tissue explant method and cultured successful y in vitro, can grow wel on the hydroxyapatite scaffold.

7.
Chinese Journal of Tissue Engineering Research ; (53): 5296-5302, 2013.
Artigo em Chinês | WPRIM | ID: wpr-435537

RESUMO

BACKGROUND:Zinc can improve bone reaction to titanium implants through regulation of osteoblast activity under the condition of osteoporosis. OBJECTIVE:To study the zinc ions effect on improving the stability of titanium implants under the condition of osteoporosis. METHODS:After removal of the ovary, 28 female Sprague-Dawley rats presented with osteoporosis symptoms for 12 weeks and then, they were randomly divided into two groups. Two kinds of titanium implants with (experimental group) or without zinc (control group) were inserted into the bilateral femoral metaphysis longitudinal y in the ovariectomized rats, separately. Three rats were selected from each group for double fluorescence labeling examination. Mineral apposition rate was calculated at postoperatively 6 weeks. Another four rats were selected from each group for histomorphometry analysis at postoperatively 12 weeks. Biomechanical test was in the remaining rats in the two groups to calculate the maximum push-out force and maximum shear force at 12 weeks postoperatively. RESULTS AND CONCLUSION:The double fluorescence labeling examination revealed that the mineral apposition rate was improved in the experimental group as compared with the control group (P<0.05). New bone formation occurred in the two groups. However, larger new bone amount, higher bone area ratio and bone-to-implant contact were detected in the experimental group (P<0.05 or P<0.01). The maximum push-out force and maximum shear force were also superior in the experimental group to the control group (P<0.05 or P<0.01). These findings indicate that zinc ions are capable of promoting bone formation and improving implant fixation in ovariectomized rats.

8.
Chinese Journal of Tissue Engineering Research ; (53): 5309-5315, 2013.
Artigo em Chinês | WPRIM | ID: wpr-435536

RESUMO

BACKGROUND:The post and core system for residual roots and crowns can achieve satisfactory effects, when fil ing restoration, ful crowns or inlay has poor effects. OBJECTIVE:To evaluate the clinical use of glass fiber post and metal post in the restoration of endodontical y treated teeth. METHODS:A total of 106 patients with 160 endodontical y treated teeth were selected and restored with glass fiber post (n=80 teeth) and metal post (n=80 teeth) fol owed by porcelain-fused-mental crown. The restorations were evaluated clinical y for 9 to 33 months. RESULTS AND CONCLUSION:Glass fiber post treatment for 78 teeth was effective and that for two teeth were failed, with a successful rate of 98%. Metal post restoration was effective in 71 teeth and failed in nine teeth including one tooth of crown fracture, four of root fracture and four of post loss, with a successful rate of 89%. There was statistical y significant difference between two groups (P<0.05). Glass fiber post is better in convenient handling and good color and reduced probability leading to root broken for dental restoration compared with metal post.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA