Stepped Coastal Water Warming Revealed by Multiparametric Monitoring at NW Mediterranean Fixed Stations.

Since 2014, the global land and sea surface temperature has scaled 0.23 °C above the decadal average (2009-2018). Reports indicate that Mediterranean Sea temperatures have been rising at faster rates than in the global ocean. Oceanographic time series of physical and biogeochemical data collected from an onboard and a multisensor mooring array in the northwestern Mediterranean Sea (Blanes submarine canyon, Balearic Sea) during 2009-2018 revealed an abrupt temperature rising since 2014, in line with regional and global warming. Since 2014, the oligotrophic conditions of the water column have intensified, with temperature increasing 0.61 °C on the surface and 0.47 °C in the whole water column in continental shelf waters. Water transparency has increased due to a decrease in turbidity anomaly of -0.1 FTU. Since 2013, inshore chlorophyll a concentration remained below the average (-0.15 mg·l-1) and silicates showed a declining trend. The mixed layer depth showed deepening in winter and remained steady in summer. The net surface heat fluxes did not show any trend linked to the local warming, probably due to the influence of incoming offshore waters produced by the interaction between the Northern Current and the submarine canyon. Present regional and global water heating pattern is increasing the stress of highly diverse coastal ecosystems at unprecedented levels, as reported by the literature. The strengthening of the oligotrophic conditions in the study area may also apply as a cautionary warning to similar coastal ecosystems around the world following the global warming trend.

‘Reliability of new poly (lactic-co-glycolic acid) membranes treated with oxygen plasma plus silicon dioxide layers for pre-prosthetic guided bone regeneration processes’

BACKGROUND: The use of cold plasmas may improve the surface roughness of poly(lactic-co-glycolic) acid (PLGA) membranes, which may stimulate the adhesion of osteogenic mediators and cells, thus accelerating the biodegradation of the barriers. Moreover, the incorporation of metallic-oxide particles to the surface of these membranes may enhance their osteoinductive capacity. Therefore, the aim of this paper was to evaluate the reliability of a new PLGA membrane after being treated with oxygen plasma (PO2 ) plus silicon dioxide (SiO2 ) layers for guided bone regeneration (GBR) processes. MATERIAL AND METHODS: Circumferential bone defects (diameter: 11 mm; depth: 3 mm) were created on the top of eight experimentation rabbits' skulls and were randomly covered with: (1) PLGA membranes (control), or (2) PLGA/ PO2 /SiO2 barriers. The animals were euthanized two months afterwards. A micromorphologic study was then performed using ROI (region of interest) colour analysis. Percentage of new bone formation, length of mineralised bone, concentration of osteoclasts, and intensity of ostheosynthetic activity were assessed and compared with those of the original bone tissue. The Kruskal-Wallis test was applied for between-group com a significance level of a=0.05 was considered. RESULTS: The PLGA/PO2 /SiO2 membranes achieved the significantly highest new bone formation, length of mineralised bone, concentration of osteoclasts, and ostheosynthetic activity. The percentage of regenerated bone supplied by the new membranes was similar to that of the original bone tissue. Unlike what happened in the control group, PLGA/PO2 /SiO2 membranes predominantly showed bone layers in advanced stages of formation. CONCLUSIONS: The addition of SiO2 layers to PLGA membranes pre-treated with PO2 improves their bone-regeneration potential. Although further research is necessary to corroborate these conclusions in humans, this could be a promising strategy to rebuild the bone architecture prior to rehabilitate edentulous areas

Reducing nutrient impacts from shrimp effluents in a subtropical coastal lagoon.

Shrimp farm aquaculture causes environmental impacts, notably decreased water quality due to the release of nutrient-rich effluents. Pond wastewater is usually discharged without treatment, and tidal conditions are not taken into account in the management plans. However, natural variability of nutrients makes difficult field evaluation and attribution of impacts. Here we implemented a three-dimensional coupled hydrodynamic-biogeochemical model (spatial resolution=50m×50m, time resolution=4s) in order to evaluate the dispersion conditions under specific tidal conditions of nutrient discharges from a semi-intensive shrimp farm during spring and neap tide. Ammonia was quickly assimilated by plankton and its concentration recovered initial levels 10days after the beginning of the harvest. Due to the higher salinity of the pond effluents, shrimp farm discharges accumulate in waters and sediments of the upper lagoon creeks, mostly affecting the benthos, thus implying a potential risk of shrimp farm self-contamination. Maximum concentrations of most biogeochemical tracers occurred when the harvest ends and the ponds are fully emptied. We show that maximum nutrient concentrations can be reduced by ~10% when the harvest ends during spring tides compared to harvests ending during neap tides. This work may be useful to improve the management of shrimp farm effluents by reducing, easily and at little cost, nutrient impacts on tropical and sub-tropical receiving ecosystems.

Kissing molars extraction: Case series and review of the literature.

UNLABELLED: Kissing molars are a very rare form of inclusion defined as molars included in the same quadrant, with occlusal surfaces contacting each other within a single dental follicle. We present four cases of this pathology: a 35 year-old male, referred to the Oral and Maxillofacial Surgery Department of the Hospital Virgen del Rocio in Seville, and three females of 24, 26, and 31 years, all of which had kissing molars that were treated by tooth extraction. We have found only 10 cases published in the medical literature in which this type of inclusion is briefly described, none of which elaborate on the surgical technique employed. In these cases, the indication for surgery is established when there is a history of recurring infections or cystic lesions associated with dental inclusions. The extraction of kissing molars requires an exhaustive comprehension of the anatomy of the region involved, sufficiently developed surgical abilities, and an extensive planning process. KEY WORDS: Impacted molar, kissing molar, surgical extraction.

'Pre-prosthetic use of poly(lactic-co-glycolic acid) membranes treated with oxygen plasma and TiO2 nanocomposite particles for guided bone regeneration processes'.

OBJECTIVES: Guided bone regeneration (GBR) processes are frequently necessary to achieve appropriate substrates before the restoration of edentulous areas. This study aimed to evaluate the bone regeneration reliability of a new poly-lactic-co-glycolic acid (PLGA) membrane after treatment with oxygen plasma (PO2) and titanium dioxide (TiO2) composite nanoparticles. METHODS: Circumferential bone defects (diameter: 10mm; depth: 3mm) were created on the parietal bones of eight experimentation rabbits and were randomly covered with control membranes (Group 1: PLGA) or experimental membranes (Group 2: PLGA/PO2/TiO2). The animals were euthanized two months afterwards, and a morphologic study was then performed under microscope using ROI (region of interest) colour analysis. Percentage of new bone formation, length of mineralised bone formed in the grown defects, concentration of osteoclasts, and intensity of osteosynthetic activity were assessed. Comparisons among the groups and with the original bone tissue were made using the Kruskal-Wallis test. The level of significance was set in advance at a=0.05. RESULTS: The experimental group recorded higher values for new bone formation, mineralised bone length, and osteoclast concentration; this group also registered the highest osteosynthetic activity. Bone layers in advanced formation stages and low proportions of immature tissue were observed in the study group. CONCLUSIONS: The functionalised membranes showed the best efficacy for bone regeneration. CLINICAL SIGNIFICANCE: The addition of TiO2 nanoparticles onto PLGA/PO2 membranes for GBR processes may be a promising technique to restore bone dimensions and anatomic contours as a prerequisite to well-supported and natural-appearing prosthetic rehabilitations.

Prospective double-blind clinical trial evaluating the effectiveness of Bromelain in the third molar extraction postoperative period

OBJECTIVES: To evaluate the anti-inflammatory and analgesic effect of Bromelain (pineapple extract) administered orally in the postoperative after extraction of impacted lower molars. Study DESIGN: This is a prospective, placebo-controlled, unicentric, double-blind study; the sample size was 34 patients. The pre and postoperative outcomes, evaluated on the third (D3) and eighth day (D8), included inflamtion, pain and oral aperture, as well as the need for analgesics. One group received Bromelain 150mg per day for three days and 100mg on days 4 to 7. The other group received placebo in the same dosage. All outcomes werrecorded quantitatively and analyzed with the Mann-Whitney U test for independent samples. RESULTS: Although there were no statistically significant differences between the treatment groups, a trend towards less inflammation and improved oral aperture was observed in the group that received Bromelain, compared to the group that received placebo. This trend can be attributed completely to random reasons, since there is no statistical difference in the results. CONCLUSIONS: Further studies are necessary to analyze different administration patterns and doses of Bromelain for the use in the postoperative of impacted third molars

The new pelagic Operational Observatory of the Catalan Sea (OOCS) for the multisensor coordinated measurement of atmospheric and oceanographic conditions.

The new pelagic Operational Observatory of the Catalan Sea (OOCS) for the coordinated multisensor measurement of atmospheric and oceanographic conditions has been recently installed (2009) in the Catalan Sea (41°39'N, 2°54'E; Western Mediterranean) and continuously operated (with minor maintenance gaps) until today. This multiparametric platform is moored at 192 m depth, 9.3 km off Blanes harbour (Girona, Spain). It is composed of a buoy holding atmospheric sensors and a set of oceanographic sensors measuring the water conditions over the upper 100 m depth. The station is located close to the head of the Blanes submarine canyon where an important multispecies pelagic and demersal fishery gives the station ecological and economic relevance. The OOCS provides important records on atmospheric and oceanographic conditions, the latter through the measurement of hydrological and biogeochemical parameters, at depths with a time resolution never attained before for this area of the Mediterranean. Twenty four moored sensors and probes operating in a coordinated fashion provide important data on Essential Ocean Variables (EOVs; UNESCO) such as temperature, salinity, pressure, dissolved oxygen, chlorophyll fluorescence, and turbidity. In comparison with other pelagic observatories presently operating in other world areas, OOCS also measures photosynthetic available radiation (PAR) from above the sea surface and at different depths in the upper 50 m. Data are recorded each 30 min and transmitted in real-time to a ground station via GPRS. This time series is published and automatically updated at the frequency of data collection on the official OOCS website (http://www.ceab.csic.es/~oceans). Under development are embedded automated routines for the in situ data treatment and assimilation into numerical models, in order to provide a reliable local marine processing forecast. In this work, our goal is to detail the OOCS multisensor architecture in relation to the coordinated capability for the remote, continuous and prolonged monitoring of atmospheric and oceanographic conditions, including data communication and storage. Accordingly, time series of measurements for a number of biological parameters will be presented for the summer months of 2011. Marine hindcast outputs from the numerical models implemented for simulating the conditions over the study area are shown. The strong changes of atmospheric conditions recorded in the last years over the area have altered the marine conditions of living organisms, but the dimension of the impact remains unclear. The OOCS multisensor coordinated monitoring has been specifically designed to address this issue, thus contributing to better understand the present environmental fluctuations and to provide a sound basis for a more accurate marine forecast system.

Chemical speciation of dissolved Cu, Ni, and Co in a contaminated estuary in southwest Spain and its influence on plankton communities.

Four surveys of the Huelva Estuary in southwest Spain and its sources, the Tinto and the Odiel Rivers, were carried out between 1996 and 1998. The surveys investigated the impact of metalliferous mining of sulfide-rich ores in the catchment area on metal speciation, metal concentrations in a macrophyte, and phytoplankton diversity and abundance. Chemical speciation measurements in the lower Tinto Estuary showed that metals were predominantly electrochemically labile (> 99% of total dissolved Cu, Co, and Ni at 10 microM Cu, 424 nM Co, and 500 nM Ni, S = 28). Concentrations of Cu complexing ligands and free cupric ions [Cu2+] in the Gulf of Cádiz ranged between 5.3 and 38 nM and 0.2-7.9 pM, respectively, with conditional stability constants of the ligands of log K'(CuL) = 11.7-12.6. At enhanced dissolved Cu concentrations in the lower Huelva Estuary, Cu complexing ligands were saturated with Cu, resulting in nanomolar [Cu2+], which increased upstream. Metal tissue concentrations of the macrophyte Blindingia marginata were high, and a clear relationship between dissolved labile Cu and macrophyte tissue Cu concentrations was observed. A low biodiversity was observed in the Huelva system (Shannon-Wiener indices (H) typically < 0.2). Nevertheless, the maximum biomass was observed in the lower Tinto Estuary, which showed high labile metal and nutrient concentrations and a low biodiversity (H < 0.02), thereby suggesting adaptation through evolutionary processes of the phytoplankton community to the harsh conditions.

An autonomous nutrient analyzer for oceanic long-term in situ biogeochemical monitoring.

An autonomous nutrient analyzer in situ (ANAIS) has been developed to monitor nitrate, silicate, and phosphate concentrations while deployed at sea at pressure (down to 1000 m). Detection is made by spectrophotometry. The instrument uses solenoid-driven diaphragm pumps to propel the sample, the standards, and the reagents through a microconduit, flow injection-style thermostated manifold. The analyzers are placed in an equipressure container filled with oil. The analyzers operate until a pressure of 100 bar and show a linear response up to 40 microM nitrate, 150 microM silicate, and 5 microM phosphate with a detection limit less than 0.1, 0.5, and 0.1 microM and an accuracy of 1, 1, and 3% for nitrate, silicate, and phosphate, respectively. The measurement protocol includes three steps over 13 min: rinsing with the sample stream, reagents introduction, and absorbance detection. Field tests comprise ANAIS nitrate, silicate, and phosphate testing alone in the surface ocean. Phosphate results are not yet fully satisfactory. The instrument implemented on top of a YOYO vertical eulerian profiler was then deployed successfully in the northwestern Mediterranean Sea acquiring 30 nitrate profiles between 200 and 1100 m over a 15-day period. This chemical analyzer can be a valuable observing asset adapted on any type of oceanographic platform.