Comparative performance evaluation of conventional and two-phase hydrophobic stirred tank reactors for methane abatement: Mass transfer and biological considerations.

This study demonstrated for the first time the capability of methanotrophs to grow inside silicone oil (SO200) and identified the optimum cultivation conditions for enrichment of hydrophobic methanotrophs (high dilution rates (D) and low CH4 transfer rates). The potential of the hydrophobic methanotrophs enriched was assessed in a single-phase stirred tank reactor (1P-STR) and in a two-phase stirred tank reactor (2P-STR). Different operational conditions were systematically evaluated in both reactors (SO200 fractions of 30 and 60 %, stirring rates of 250 and 500 rpm, and D of 0.1-0.35 day(-1) with and without biomass retention). The results showed that the TPPB only supported a superior CH4 abatement performance compared to the 1P-STR (40% enhancement at 250 rpm and 25% enhancement at 500 rpm) at a D of 0.3 day(-1) due to the retention of the biocatalytic activity inside the SO200, while the 1P-STR achieved higher elimination capacities (EC up to ≈3 times) than the TPPB under the rest of conditions tested (ECmax = 91.1 g m(-3) h(-1) ). Furthermore, the microscopic examination and DGGE-sequencing of the communities showed that the presence of SO200 influenced the microbial population structure, impacting on bacterial biodiversity and favoring the growth of methanotrophs such as Methylosarcina. Biotechnol. Bioeng. 2016;113: 1203-1212. © 2015 Wiley Periodicals, Inc.

Integral approaches to wastewater treatment plant upgrading for odor prevention: Activated Sludge and Oxidized Ammonium Recycling.

Traditional physical/chemical end-of-the-pipe technologies for odor abatement are relatively expensive and present high environmental impacts. On the other hand, biotechnologies have recently emerged as cost-effective and environmentally friendly alternatives but are still limited by their investment costs and land requirements. A more desirable approach to odor control is the prevention of odorant formation before being released to the atmosphere, but limited information is available beyond good design and operational practices of the wastewater treatment process. The present paper reviews two widely applicable and economic alternatives for odor control, Activated Sludge Recycling (ASR) and Oxidized Ammonium Recycling (OAR), by discussing their fundamentals, key operating parameters and experience from the available pilot and field studies. Both technologies present high application potential using readily available plant by-products with a minimum plant upgrading, and low investment and operating costs, contributing to the sustainability and economic efficiency of odor control at wastewater treatment facilities.

Two-liquid phase partitioning biotrickling filters for methane abatement: exploring the potential of hydrophobic methanotrophs.

The potential of two-liquid phase biotrickling filters (BTFs) to overcome mass transfer limitations derived from the poor aqueous solubility of CH4 has been scarcely investigated to date. In this context, the abatement of diluted methane emissions in two-liquid phase BTFs was evaluated using two different inocula: a type II methanotrophs culture in BTF 1 and a hydrophobic microbial consortium capable of growing inside silicone oil in BTF 2. Both BTFs supported stable elimination capacities above 45 g m(-3) h(-1) regardless of the inoculum, whereas no improvement derived from the presence of hydrophobic microorganisms compared to the type II metanotrophs culture was observed. Interestingly, the addition of silicone oil mediated a reduced metabolites concentration in the recycling aqueous phase, thus decreasing the needs for mineral medium renewal. Moreover, a 78% similarity was recorded between the microbial communities enriched in both BTFs at the end of the experimental period in spite of the differences in the initial inoculum structure. The results obtained confirmed the superior performance of two-liquid phase BTFs for CH4 abatement compared with conventional biotrickling filters.

Selection of odour removal technologies in wastewater treatment plants: a guideline based on Life Cycle Assessment.

This paper aims at analysing the environmental benefits and impacts associated with the treatment of malodorous emissions from wastewater treatment plants (WWTPs). The life cycle assessment (LCA) methodology was applied to two biological treatments, namely biofilter (BF) and biotrickling filter (BTF), two physical/chemical alternatives, namely activated carbon tower (AC) and chemical scrubber (CS), and a hybrid combination of BTF + AC. The assessment provided consistent guidelines for technology selection, not only based on removal efficiencies, but also on the environmental impact associated with the treatment of emissions. The results showed that biological alternatives entailed the lowest impacts. On the contrary, the use of chemicals led to the highest impacts for CS. Energy use was the main contributor to the impact related to BF and BTF, whereas the production of glass fibre used as infrastructure material played an important role in BTF impact. Production of NaClO entailed the highest burdens among the chemicals used in CS, representing ∼ 90% of the impact associated to chemicals. The frequent replacement of packing material in AC was responsible for the highest environmental impacts, granular activated carbon (GAC) production and its final disposal representing more than 50% of the impact in most categories. Finally, the assessment of BTF + AC showed that the hybrid technology is less recommendable than BF and BTF, but friendlier to the environment than physical/chemical treatments.

Biocatalytic coatings for air pollution control: a proof of concept study on VOC biodegradation.

Although biofilm-based biotechnologies exhibit a large potential as solutions for off-gas treatment, the high water content of biofilms often causes pollutant mass transfer limitations, which ultimately limit their widespread application. The present study reports on the proof of concept of the applicability of bioactive latex coatings for air pollution control. Toluene vapors served as a model volatile organic compound (VOC). The results showed that Pseudomonas putida F1 cells could be successfully entrapped in nanoporous latex coatings while preserving their toluene degradation activity. Bioactive latex coatings exhibited toluene specific biodegradation rates 10 times higher than agarose-based biofilms, because the thin coatings were less subject to diffusional mass transfer limitations. Drying and pollutant starvation were identified as key factors inducing a gradual deterioration of the biodegradation capacity in these innovative coatings. This study constitutes the first application of bioactive latex coatings for VOC abatement. These coatings could become promising means for air pollution control.

Deterioration of organic packing materials commonly used in air biofiltration: effect of VOC-packing interactions.

The abiotic deterioration of three conventional organic packing materials used in biofiltration (compost, wood bark and Macadamia nutshells) caused by their interaction with toluene (used as a model volatile organic compound) was here studied. The deterioration of the materials was evaluated in terms of structural damage, release of co-substrates and increase of the packing biodegradability. After 21 days of exposure to toluene, all packing materials released co-substrates able to support microbial growth, which were not released by the control materials not exposed to toluene. Likewise, the exposure to toluene increased the packing material biodegradability by 26% in wood bark, 20% in compost and 17% in Macadamia nutshells. Finally, scanning electron microscopy analysis confirmed the deterioration in the structure of the packing materials evaluated due to the exposure to toluene, Macadamia nutshells being the material with the highest resistance to volatile organic compound attack.

Step-feed biofiltration: a low cost alternative configuration for off-gas treatment.

Clogging due to biomass accumulation and the loss of structural stability of the packing media are common operational drawbacks of standard gas biofiltration inherent to the traditional biofilter design, which result in prohibitive pressure drop buildups and media channeling. In this work, an innovative step-feed biofilter configuration, with the air emission supplied in either two or three locations along the biofilter height, was tested and compared with a standard biofilter using toluene as a model pollutant and two packing materials: compost and perlite. When using compost, the step-feed biofilter supported similar elimination capacities (EC ≈ 80 g m(-3) h(-1)) and CO2 production rates (200 g m(-3) h(-1)) to those achieved in the standard biofilter. However, while the pressure drop in the step-feed system remained below 300 Pa m bed(-1) for 61 days, the standard biofilter reached this value in only 14 days and 4000 Pa m bed(-1) by day 30, consuming 75% more compression energy throughout the entire operational period. Operation with perlite supported lower ECs compared to compost in both the step-feed and standard biofilters (≈ 30 g m(-3) h(-1)), probably due to the high indigenous microbial diversity present in this organic packing material. The step-feed biofilter exhibited 65% lower compression energy requirements than the standard biofilter during operation with perlite, while supporting similar ECs. In brief, step-feed biofiltration constitutes a promising operational strategy capable of drastically reducing the operating costs of biofiltration due to a reduced energy consumption and an increased packing material lifespan.

A comparative study of fungal and bacterial biofiltration treating a VOC mixture.

Bacterial biofilters usually exhibit a high microbial diversity and robustness, while fungal biofilters have been claimed to better withstand low moisture contents and pH values, and to be more efficient coping with hydrophobic volatile organic compounds (VOCs). However, there are only few systematic evaluations of both biofiltration technologies. The present study compared fungal and bacterial biofiltration for the treatment of a VOC mixture (propanal, methyl isobutyl ketone-MIBK, toluene and hexanol) under the same operating conditions. Overall, fungal biofiltration supported lower elimination capacities than its bacterial counterpart (27.7 ± 8.9 vs 40.2 ± 5.4 gCm(-3) reactor h(-1)), which exhibited a final pressure drop 60% higher than that of the bacterial biofilter due to mycelial growth. The VOC mineralization ratio was also higher in the bacterial bed (≈ 63% vs ≈ 43%). However, the substrate biodegradation preference order was similar for both biofilters (propanal>hexanol>MIBK>toluene) with propanal partially inhibiting the consumption of the rest of the VOCs. Both systems supported an excellent robustness versus 24h VOC starvation episodes. The implementation of a fungal/bacterial coupled system did not significantly improve the VOC removal performance compared to the individual biofilter performances.

Biotechnologies for greenhouse gases (CH4, N2O, and CO2) abatement: state of the art and challenges.

Today, methane (CH4), nitrous oxide (N2O), and carbon dioxide (CO2) emissions represent approximately 98 % of the total greenhouse gas (GHG) inventory worldwide, and their share is expected to increase significantly in this twenty-first century. CO2 represents the most important GHG with approximately 77 % of the total GHG emissions (considering its global warming potential) worldwide, while CH4 and N2O are emitted to a lesser extent (14 and 8 %, respectively) but exhibit global warming potentials 23 and 298 times higher than that of CO2, respectively. Most members of the United Nations, based on the urgent need to maintain the global average temperature 2 °C above preindustrial levels, have committed themselves to significantly reduce their GHG emissions. In this context, an active abatement of these emissions will help to achieve these target emission cuts without compromising industrial growth. Nowadays, there are sufficient empirical evidence to support that biological technologies can become, if properly tailored, a low-cost and environmentally friendly alternative to physical/chemical methods for the abatement of GHGs. This study constitutes a state-of-the-art review of the microbiology (biochemistry, kinetics, and waste-to-value processes) and bioreactor technology of CH4, N2O, and CO2 abatement. The potential and limitations of biological GHG degradation processes are critically discussed, and the current knowledge gaps and technology niches in the field are identified.

Influence of gaseous VOC concentration on the diversity and biodegradation performance of microbial communities.

In this work, the influence of toluene gas concentration on the isolation of toluene degrading microbial communities from activated sludge was studied. Toluene biodegradation at gas phase concentration of 10 g m(-3) (R1) resulted in process instability with removal efficiencies (RE) lesser than 33 %, while operation at toluene gas phase concentrations of 300 mg m(-3) (R2) and 11 mg m(-3) (R3) was stable with RE ranging from 74 to 94 %. The consortium isolated in R1 exhibited the highest tolerance toward toluene but the lowest biodegradation performance at trace level VOC concentrations. Despite R2 and R3 showed a similar sensitivity toward toluene toxicity, the microbial community from R2 supported the most efficient toluene biodegradation at trace level VOC concentrations. The Shannon-Wiener index showed an initial biodiversity decrease from 3.2 to 2.0, 1.9 and 2.7 in R1, R2 and R3, respectively. However, while R2 and R3 were able to recover their initial diversity levels by day 48, this loss in diversity was permanent in R1. These results showed that traditional inoculum isolation/acclimation techniques based on the exposure of the inoculum to high VOC concentrations, where toxicity tolerance plays a key role, may result in a poor abatement performance when the off-gas stream is diluted.

A sensitivity analysis of process design parameters, commodity prices and robustness on the economics of odour abatement technologies.

The sensitivity of the economics of the five most commonly applied odour abatement technologies (biofiltration, biotrickling filtration, activated carbon adsorption, chemical scrubbing and a hybrid technology consisting of a biotrickling filter coupled with carbon adsorption) towards design parameters and commodity prices was evaluated. Besides, the influence of the geographical location on the Net Present Value calculated for a 20 years lifespan (NPV20) of each technology and its robustness towards typical process fluctuations and operational upsets were also assessed. This comparative analysis showed that biological techniques present lower operating costs (up to 6 times) and lower sensitivity than their physical/chemical counterparts, with the packing material being the key parameter affecting their operating costs (40-50% of the total operating costs). The use of recycled or partially treated water (e.g. secondary effluent in wastewater treatment plants) offers an opportunity to significantly reduce costs in biological techniques. Physical/chemical technologies present a high sensitivity towards H2S concentration, which is an important drawback due to the fluctuating nature of malodorous emissions. The geographical analysis evidenced high NPV20 variations around the world for all the technologies evaluated, but despite the differences in wage and price levels, biofiltration and biotrickling filtration are always the most cost-efficient alternatives (NPV20). When, in an economical evaluation, the robustness is as relevant as the overall costs (NPV20), the hybrid technology would move up next to BTF as the most preferred technologies.

Odor abatement in biotrickling filters: effect of the EBRT on methyl mercaptan and hydrophobic VOCs removal.

The performance and microbiology of a biotrickling filter (BTF) treating methyl mercaptan, toluene, alpha-pinene and hexane at the mg m(-3) level was studied at empty bed residence times (EBRT) of 50, 30, 11 and 7 s. Removal efficiencies (REs) higher than 95% were observed for MeSH, toluene and alpha-pinene even at 11 s, while hexane REs exceeded 70%. At 7 s, an irreversible damage of the microbial activity due to the accumulation of toxic metabolites resulted in a decrease of REs. The addition of silicone stabilized process performance but only re-inoculation allowed achieving a complete removal of MeSH, toluene and alpha-pinene, and hexane REs of 80%. The high K(L)a values (ranging from 38 ± 4 to 90 ± 11 h(-1)) explained the good BTF performance at such low EBRTs. A high bacterial diversity, along with a vertical distribution of the bacterial communities was observed, the main phyla being Proteobacteria, Actinobacteria, Nitrospira, Chloroflexi and Gemmatimonadertes.

Gasto cardíaco materno como predictor del síndrome de preeclampsia-eclampsia / Maternal cardiac output as a predictor of preeclampsia-eclampsia syndrome

Introducción y objetivos: La hipertensión es la complicación médica más común del embarazo, y puede dejar secuelas permanentes como: alteraciones neurológicas, hepáticas, hematológicas o renales. Cada tres minutos muere una mujer debido a la preeclampsia. Durante el embarazo el gasto cardíaco sufre un incremento de hasta 40 por ciento. Este incremento es secundario al aumento de aproximadamente 30 por ciento del volumen sistólico. El objetivo de la investigación fue predecir la aparición del síndrome de preeclampsia-eclampsia mediante la identificación de alteraciones del gasto cardíaco. Método: Se realizó un estudio observacional, descriptivo, longitudinal y analítico, de cohorte prospectiva, donde se determinó, por ecocardiografía, el gasto cardíaco en 31 embarazadas, entre las semanas 11 y 13,6 de gestación como único valor; y mediante seguimiento prenatal, se observó la aparición o no del síndrome de Preeclampsia-Eclampsia. Resultados: Se logró el seguimiento de 31 embarazadas a las que se le midió el gasto cardíaco, y se encontró una prevalecía de la enfermedad de 12,9 por ciento con un 64,5 por ciento de pacientes correctamente diagnosticados, con una sensibilidad de 75 por ciento, con valor predictivo positivo de 23 por ciento, especificidad de 62 por ciento y valor predictivo negativo de 94 por ciento, con un riesgo relativo de 4,1 (intervalo de confianza 95 por ciento, 0,48-35,6). Conclusiones: Es posible establecer la medición de gasto cardíaco como estudio de escrutinio para predecir la aparición del síndrome de Preeclampsia desde el control prenatal, y contribuir así a la disminución de la muerte materna(AU)

A comparative analysis of odour treatment technologies in wastewater treatment plants.

Biofiltration, activated sludge diffusion, biotrickling filtration, chemical scrubbing, activated carbon adsorption, regenerative incineration, and a hybrid technology (biotrickling filtration coupled with carbon adsorption) are comparatively evaluated in terms of environmental performance, process economics, and social impact by using the IChemE Sustainability Metrics in the context of odor treatment from wastewater treatment plants (WWTP). This comparative analysis showed that physical/chemical technologies presented higher environmental impacts than their biological counterparts in terms of energy, material and reagents consumption, and hazardous-waste production. Among biological techniques, the main impact was caused by the high water consumption to maintain biological activity (although the use of secondary effluent water can reduce both this environmental impact and operating costs), biofiltration additionally exhibiting high land and material requirements. From a process economics viewpoint, technologies with the highest investments presented the lowest operating costs (biofiltration and biotrickling filtration), which suggested that the Net Present Value should be used as selection criterion. In addition, a significant effect of the economy of scale on the investment costs and odorant concentration on operating cost was observed. The social benefits derived from odor abatement were linked to nuisance reductions in the nearby population and improvements in occupational health within the WWTP, with the hybrid technology exhibiting the highest benefits. On the basis of their low environmental impact, high deodorization performance, and low Net Present Value, biotrickling filtration and AS diffusion emerged as the most promising technologies for odor treatment in WWTP.