Ferrous sulfate microparticles obtained by spray chilling: characterization, stability and in vitro digestion simulation.

The use of microencapsulated ferrous-sulfate is among the various options recommended for food fortification, as the protective wall material surrounding the compound can preserve it from undesirable alterations and also protect the food. Microencapsulated iron can be produced using different wall materials and encapsulation methods. Thus, a microparticle was developed through spray chilling, containing ferrous sulfate (FS), as active compound, and a fat mixture as the coating material. The resulting samples analyzed to determine encapsulation efficiency, particle size distribution, and morphology. Furthermore, the oxidative stability and bioaccessibility of FS microparticles were investigated by simulating in vitro digestion. The findings indicated that the encapsulation technique effectively retained FS, resulting in microparticles physically stable at room temperature with typical morphology. The encapsulation efficiency revealed that lower concentrations of FS led to reduced superficial iron content. However, the oxidative stability demonstrated that the presence of iron in the microparticles accelerated the lipid oxidation process. The in vitro digestion test demonstrated that the microparticles with lower iron content exhibited a higher percentage of bioaccessibility, even when compared to non-encapsulated FS. Additionally, the coating material successfully released FS during the simulation of gastrointestinal digestion, resulting in a bioaccessibility of 7.98%. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05820-1.

Impact of the fortification of a rice beverage with different calcium and iron sources on calcium and iron bioaccessibility.

Rice beverages are commonly fortified with minerals to improve their nutritional value. However, the effect of fortification on mineral bioaccessibility is poorly understood. Thus, the effects of fortification of a rice beverage on mineral concentration and bioaccessibility using calcium carbonate (CaCO3), tricalcium phosphate (Ca3(PO4)2), sodium iron EDTA (NaFeEDTA) and ferric pyrophosphate (Fe4(P2O7)3) individually and in combination were studied. Recovery of the added minerals in the rice beverage ranged from 71.4 % to 92.0 % and 61.0 % to 93.3 % for Ca and Fe, respectively. Mineral bioacessibility was shown to be higher for CaCO3(≤39.0 %) compared to Ca3(PO4)2 (≤14.4 %) and for NaFeEDTA (≤50.7 %) compared to Fe4(P2O7)3 (≤3.9 %). No interaction of the different Ca sources was identified; the addition of iron sources did not have a significant effect on Ca bioaccessibility. The addition of NaFeEDTA to the rice beverage was found to be better than the addition of iron pyrophosphate and the simultaneous addition of this iron sources did not result in an additive effect on Fe bioaccessibility. These results may be used to develop plant-based beverages with an improved mineral bioaccessibility.

In vitro digestion effect on mineral bioaccessibility and antioxidant bioactive compounds of plant-based beverages.

Consumption of plant-based beverages (PBB) is a growing trend; and have been used as viable substitutes for dairy based products. To date, no study has comparatively analyzed mineral composition and effect of in vitro digestion on the bioaccessibility of different PBB. The aim of this research was to investigate the content of essential minerals (calcium (Ca), magnesium (Mg), iron (Fe), zinc (Zn)) and to estimate the effect of in vitro digestion in plant-based beverages, and their antioxidant bioactive compounds (phenolic compounds and antioxidant capacity). Moreover, the presence of antinutritional factors, such as myo-inositol phosphates fractions, were evaluated. Samples of PBB (rice, cashew nut, almond, peanut, coconut, oat, soy, blended or not with another ingredients, fortified with minerals or naturally present) and milk for comparison were evaluated. TPC ranged from 0.2 mg GAEq/L for coconut to 12.4 mg GAEq/L for rice and, the antioxidant capacity (DPPH) ranged from 3.1 to 306.5 µmol TE/L for samples containing peanut and oat, respectively. Only a few samples presented myo-inositol phosphates fractions in their composition, mostly IP5 and IP6, especially cashew nut beverages. Mineral content showed a wide range for Ca, ranging from 10 to 1697.33 mg/L for rice and coconut, respectively. The Mg content ranged from 6.29 to 251.23-268.43 mg/L for rice and cashew nut beverages, respectively. Fe content ranged from 0.76 mg/L to 12.89 mg/L for the samples of rice. Zinc content ranged from 0.57 mg/L to 8.13 mg/L for samples of oat and soy, respectively. Significant variation was observed for Ca (8.2-306.6 mg/L) and Mg (1.9-107.4 mg/L) dialyzed between the beverages, with lower concentrations of Fe (1.0 mg/L) and Zn (0.5 mg/L) in dialyzed fractions. This study provides at least 975 analytically determined laboratory results, providing important information for characterization and comparison of different plant-based beverages.

Sodium in different processed and packaged foods: Method validation and an estimative on the consumption.

Excessive sodium (Na) consumption can lead to serious health problems such as hypertension, and cardiovascular and renal diseases. Therefore, the food industry in worldwide has been trying to reduce sodium levels in processed products. The aim of this study was to validate a method and quantify sodium in processed and packaged foods and to estimate its ingestion in the consumption. In the first step, for choose the adequate analytical procedure different samples preparations (mineralization) were evaluated as wet and dry ash mineralization, as well as CsCl concentration to suppress chemical interferences for apply FAAS technique. The best performance conditions were applied for the analytical method validation: mineralization by wet digestion and adding 0.1% CsCl, which characterized the method as simple and low cost. The method was validated and was applied in 12 different processed food matrices (5 brands, 3 batches), including products of vegetable and animal origins, different majority components and interferences for Na evaluation. The results showed that sausage, hamburger, ham, bread, tomato sauce, ketchup, mustard, mayonnaise and mashed potato were classified as high-sodium foods, with mean values above 460 mg 100 g-1. It was verified that 68% of the samples were regarded as having high sodium content and the maximum value found was 2851 mg 100 g-1 for a sample of mashed potatoes. In addition, it was found that 38% of the samples presented differences in Na concentration when compared to content declared on the label. It is also observed that is possible different sodium ingestion according the combinations of processed and packaged foods in the same meal and, in this case, the sodium consumption is above than the daily value as recommended by the regulatory agencies. It was concluded that the majority of processed and packaged foods presented high sodium concentration even with efforts of the food industry to reduce the levels of this mineral and its remains an important public health problem.

A comprehensive characterization of Solanum lycocarpum St. Hill and Solanum oocarpum Sendtn: Chemical composition and antioxidant properties.

In this study we evaluated the proximate composition of two Solanaceae fruits from Brazilian Cerrado, their mineral content, volatile organic compounds (VOCs), phenolic compounds profile, and antioxidant capacity employing Oxygen Radical Absorbance Capacity (ORAC) assay, for each part of the fruits (pulp, peel and seeds). Our results showed that the pulp has a high moisture content (74.62-85.40 g/100 g) and soluble fiber (1.29-2.06 g/100 g) content, and low fat, protein, and ash content. The peel exhibited high levels of carbohydrates and total fibers (6.55-11.39 and 12.35-13.12 g/100 g, respectively), while the seed presented high content of fat, protein, and insoluble fiber (10.14-12.62, 9.14-13.24 and 19.84-23.15 g/100 g). Potassium is the main mineral found in both fruits. It is the first time that the carbohydrate profile, volatile components, and phenolic compounds of the fruta-do-lobo and juá-açu are reported. 1-Kestose (GF2) and nystose (GF3) were found in both fruits. The main VOCs of juá-açu were esters, while in fruta-do-lobo, aldehydes were the major components. UPLC-Q-ToF fraction analysis of juá-açu and fruta-do-lobo revealed 24 phenolic compounds, most being hydroxycinnamic acids derivatives in juá-açu, and chlorogenic acids in fruta-do-lobo. The antioxidant capacity (ORAC) of the fruits ranged from 1.35 to 11.51 µmol TE/100 mL of extract. These results indicate that Solanum genus can be interesting for the Brazilian fruit market, and that it has potential to be exploited for agroindustry for diversification of fruit products.

Bioaccessibility of calcium, iron and magnesium in residues of citrus and characterization of macronutrients.

The aim of this study was to estimate bioaccessibility of Ca, Fe and Mg in residues of orange, lime, and their mixture, in order to evaluate the effects of cooking in water on mineral bioaccessibility and also to determine the composition of macronutrients and myo-inositol phosphate content. The citrus samples contained on average 9.53g/100 g moisture, 6.09g/100 g protein, 3.23g/100g ash, 3.15g/100g lipids, 34.26g/100g insoluble fiber, 27.88g/100g soluble fiber and 25.64g/100g carbohydrates. The percentage of soluble and dialyzable minerals ranged from 19.36 to 77.33% and from 5.59 to 69.06% for Fe, from 33.34 to 60.84% and 14.71 to -26.13% for Ca, and from 29.95 to 94.20% and 34.42 to 62.51%, for Mg, respectively. It was verified that cooking influenced the minerals bioaccessibility and increased the dialyzable fraction of Fe and Mg, but decreased the fraction of Ca dialysate, except to orange. No myoinositol phosphate esters were detected. The Principal Component Analysis allowed the separation of different types of citrus residues, but did not discriminate the raw and cooked samples. This study pointed the potential of citrus residue to be used for human consumption and contribute to the necessary dietary minerals and macronutrients, with high content of soluble and insoluble fibers.

Effect of different iron compounds on rheological and technological parameters as well as bioaccessibility of minerals in whole wheat bread.

This study aimed at investigating the effect of iron compounds used in whole wheat flour (WWF) fortification, both on rheological properties of the dough and on bread technological quality. Furthermore, bioaccessibility of iron (Fe), zinc (Zn) and calcium (Ca) in the final breads was determined. Rheological properties (mainly dough development time, stability, mixing tolerance index, resistance to extension and ratio number) of the dough and the technological quality of bread (mainly oven spring and cut opening) were altered. However, producing roll breads fortified with different iron compounds was still possible. NaFeEDTA (ferric sodium ethylene diamine tetra acetic acid) proved to be the most effective iron compound in the fortification of WWF, since it presented the highest levels of solubility (44.80%) and dialysability (46.14%), followed by microencapsulated ferrous fumarate (FFm). On the other hand, the microencapsulated ferrous sulfate (FSm) and reduced iron presented the lowest solubility (5.40 and 18.30%, respectively) and dialysability (33.12 and 31.79%, respectively). Zn dialysis was positively influenced by NaFeEDTA, FSm, and ferrous fumarate. As for Ca, dialysis was positively influenced by FSm and negatively influenced by FFm. The data indicated that there is a competitive interaction for the absorption of these minerals in whole wheat roll breads, but all studied minerals can be considered bioaccessible.