Spin State Disproportionation in Insulating Ferromagnetic LaCoO3 Epitaxial Thin Films.

The origin of insulating ferromagnetism in epitaxial LaCoO3 films under tensile strain remains elusive despite extensive research efforts are devoted. Surprisingly, the spin state of its Co ions, the main parameter of its ferromagnetism, is still to be determined. Here, the spin state in epitaxial LaCoO3 thin films is systematically investigated to clarify the mechanism of strain-induced ferromagnetism using element-specific X-ray absorption spectroscopy and dichroism. Combining with the configuration interaction cluster calculations, it is unambiguously demonstrated that Co3+ in LaCoO3 films under compressive strain (on LaAlO3 substrate) is practically a low-spin state, whereas Co3+ in LaCoO3 films under tensile strain (on SrTiO3 substrate) have mixed high-spin and low-spin states with a ratio close to 1:3. From the identification of this spin state ratio, it is inferred that the dark strips observed by high-resolution scanning transmission electron microscopy indicate the position of Co3+ high-spin state, i.e., an observation of a spin state disproportionation in tensile-strained LaCoO3 films. This consequently explains the nature of ferromagnetism in LaCoO3 films. The study highlights the importance of spin state degrees of freedom, along with thin-film strain engineering, in creating new physical properties that do not exist in bulk materials.

Tunable Magnetic Properties in Sr2FeReO6 Double-Perovskite.

Double-perovskite oxides have attracted recent attention due to their attractive functionalities and application potential. In this paper, we demonstrate the effect of dual controls, i.e., the deposition pressure of oxygen (PO2) and lattice mismatch (ε), on tuning magnetic properties in epitaxial double-perovskite Sr2FeReO6 films. In a nearly lattice matched Sr2FeReO6/SrTiO3 film, the ferrimagnetic-to-paramagnetic phase transition occurs when PO2 is reduced to 30 mTorr, probably due to the formation of Re4+ ions that replace the stoichiometric Re5+ to cause disorders of B-site ions. On the other hand, a large compressive strain or tensile strain shifts this critical PO2 to below 1 mTorr or above 40 mTorr, respectively. The observations can be attributed to the modulation of B-site ordering by epitaxial strain through affecting elemental valence. Our results provide a feasible way to expand the functional tunability of magnetic double-perovskite oxides that hold great promise for spintronic devices.

Superconductivity in infinite-layer nickelate La1-xCaxNiO2 thin films.

We report the observation of superconductivity in infinite-layer Ca-doped LaNiO2 (La1-xCaxNiO2) thin films and construct their phase diagram. Unlike the metal-insulator transition in Nd- and Pr-based nickelates, the undoped and underdoped La1-xCaxNiO2 thin films are entirely insulating from 300 K down to 2 K. A superconducting dome is observed at 0.15 < x < 0.3 with weakly insulating behavior at the overdoped regime. Moreover, the sign of the Hall coefficient RH changes at low temperature for samples with a higher doping level. However, distinct from the Nd- and Pr-based nickelates, the RH-sign-change temperature remains at around 35 K as the doping increases, which begs further theoretical and experimental investigation to reveal the role of the 4f orbital to the (multi)band nature of the superconducting nickelates. Our results also emphasize a notable role of lattice correlation on the multiband structures of the infinite-layer nickelates.

Electric Field Control of the Magnetic Weyl Fermion in an Epitaxial SrRuO3 (111) Thin Film.

The magnetic Weyl fermion originates from the time reversal symmetry (TRS)-breaking in magnetic crystalline structures, where the topology and magnetism entangle with each other. Therefore, the magnetic Weyl fermion is expected to be effectively tuned by the magnetic field and electrical field, which holds promise for future topologically protected electronics. However, the electrical field control of the magnetic Weyl fermion has rarely been reported, which is prevented by the limited number of identified magnetic Weyl solids. Here, the electric field control of the magnetic Weyl fermion is demonstrated in an epitaxial SrRuO3 (111) thin film. The magnetic Weyl fermion in the SrRuO3 films is indicated by the chiral anomaly induced magnetotransport, and is verified by the observed Weyl nodes in the electronic structures characterized by the angle-resolved photoemission spectroscopy (ARPES) and first-principles calculations. Through the ionic-liquid gating experiment, the effective manipulation of the Weyl fermion by electric field is demonstrated, in terms of the sign-change of the ordinary Hall effect, the nonmonotonic tuning of the anomalous Hall effect, and the observation of the linear magnetoresistance under proper gating voltages. The work may stimulate the searching and tuning of Weyl fermions in other magnetic materials, which are promising in energy-efficient electronics.

Emergent Topological Hall Effect at a Charge-Transfer Interface.

Exploring exotic interface magnetism due to charge transfer and strong spin-orbit coupling has profound application in the future development of spintronic memory. Here, the emergence and tuning of topological Hall effect (THE) from a CaMnO3 /CaIrO3 /CaMnO3 trilayer structure are studied in detail, which suggests the presence of magnetic Skyrmion-like bubbles. First, by tilting the magnetic field direction, the evolution of the Hall signal suggests a transformation of Skyrmions into topologically-trivial stripe domains, consistent with behaviors predicted by micromagnetic simulations. Second, by varying the thickness of CaMnO3 , the optimal thicknesses for the THE signal emergence are found, which allow identification of the source of Dzyaloshinskii-Moriya interaction (DMI) and its competition with antiferromagnetic superexchange. Employing high-resolution transmission electron microscopy, randomly distributed stacking faults are identified only at the bottom interface and may avoid mutual cancellation of DMI. Last, a spin-transfer torque experiment also reveals a low threshold current density of ≈109 A m-2 for initiating the bubbles' motion. This discovery sheds light on a possible strategy for integrating Skyrmions with antiferromagnetic spintronics.

Phase Diagram and Superconducting Dome of Infinite-Layer Nd_{1-x}Sr_{x}NiO_{2} Thin Films.

Infinite-layer Nd_{1-x}Sr_{x}NiO_{2} thin films with Sr doping level x from 0.08 to 0.3 are synthesized and investigated. We find a superconducting dome x between 0.12 and 0.235 accompanied by a weakly insulating behavior in both under- and overdoped regimes. The dome is akin to that in the electron-doped 214-type and infinite-layer cuprate superconductors. For x≥0.18, the normal state Hall coefficient (R_{H}) changes the sign from negative to positive as the temperature decreases. The temperature of the sign changes decreases monotonically with decreasing x from the overdoped side and approaches the superconducting dome at the midpoint, suggesting a reconstruction of the Fermi surface with the dopant concentration across the dome.

Room-Temperature Colossal Magnetoresistance in Terraced Single-Layer Graphene.

Disorder-induced magnetoresistance (MR) effect is quadratic at low perpendicular magnetic fields and linear at high fields. This effect is technologically appealing, especially in 2D materials such as graphene, since it offers potential applications in magnetic sensors with nanoscale spatial resolution. However, it is a great challenge to realize a graphene magnetic sensor based on this effect because of the difficulty in controlling the spatial distribution of disorder and enhancing the MR sensitivity in the single-layer regime. Here, a room-temperature colossal MR of up to 5000% at 9 T is reported in terraced single-layer graphene. By laminating single-layer graphene on a terraced substrate, such as TiO2 -terminated SrTiO3 , a universal one order of magnitude enhancement in the MR compared to conventional single-layer graphene devices is demonstrated. Strikingly, a colossal MR of >1000% is also achieved in the terraced graphene even at a high carrier density of ≈1012 cm-2 . Systematic studies of the MR of single-layer graphene on various oxide- and non-oxide-based terraced surfaces demonstrate that the terraced structure is the dominant factor driving the MR enhancement. The results open a new route for tailoring the physical property of 2D materials by engineering the strain through a terraced substrate.

Atomic Origin of Interface-Dependent Oxygen Migration by Electrochemical Gating at the LaAlO3-SrTiO3 Heterointerface.

Electrical control of material properties based on ionic liquids (IL) has seen great development and emerging applications in the field of functional oxides, mainly understood by the electrostatic and electrochemical gating mechanisms. Compared to the fast, flexible, and reproducible electrostatic gating, electrochemical gating is less controllable owing to the complex behaviors of ion migration. Here, the interface-dependent oxygen migration by electrochemical gating is resolved at the atomic scale in the LaAlO3-SrTiO3 system through ex situ IL gating experiments and on-site atomic-resolution characterization. The difference between interface structures leads to the controllable electrochemical oxygen migration by filling oxygen vacancies. The findings not only provide an atomic-scale insight into the origin of interface-dependent electrochemical gating but also demonstrate an effective way of engineering interface structure to control the electrochemical gating.

Interfacial Oxygen-Driven Charge Localization and Plasmon Excitation in Unconventional Superconductors.

Charge localization is critical to the control of charge dynamics in systems such as perovskite solar cells, organic-, and nanostructure-based photovoltaics. However, the precise control of charge localization via electronic transport or defect engineering is challenging due to the complexity in reaction pathways and environmental factors. Here, charge localization in optimal-doped La1.85 Sr0.15 CuO4 thin-film on SrTiO3 substrate (LSCO/STO) is investigated, and also a high-energy plasmon is observed. Charge localization manifests as a near-infrared mid-gap state in LSCO/STO. This is ascribed to the interfacial hybridization between the Ti3d-orbitals of the substrate and O2p-orbitals of the film. The interfacial effect leads to significant changes in the many-body correlations and local-field effect. The local-field effect results in an inhomogeneous charge distribution, and due to perturbation by an external field, the high polarizability of this nonuniform charge system eventually generates the high-energy plasmon. Transformation of the electronic correlations in LSCO/STO is further demonstrated via temperature-dependent spectral-weight transfer. This study of charge localization in cuprates and interfacial hybridization provides important clues to their electronic structures and superconductive properties.

Characteristic Lengths of Interlayer Charge Transfer in Correlated Oxide Heterostructures.

Using interlayer interaction to control functional heterostructures with atomic-scale designs has become one of the most effective interface-engineering strategies nowadays. Here, we demonstrate the effect of a crystalline LaFeO3 buffer layer on amorphous and crystalline LaAlO3/SrTiO3 heterostructures. The LaFeO3 buffer layer acts as an energetically favored electron acceptor in both LaAlO3/SrTiO3 systems, resulting in modulation of interfacial carrier density and hence metal-to-insulator transition. For amorphous and crystalline LaAlO3/SrTiO3 heterostructures, the metal-to-insulator transition is found when the LaFeO3 layer thickness crosses 3 and 6 unit cells, respectively. Such different critical LaFeO3 thicknesses are explained in terms of distinct characteristic lengths of the redox-reaction-mediated and polar-catastrophe-dominated charge transfer, controlled by the interfacial atomic contact and Thomas-Fermi screening effect, respectively. Our results not only shed light on the complex interlayer charge transfer across oxide heterostructures but also provide a new route to precisely tailor the charge-transfer process at a functional interface.

Outcome of Different Approaches to Reduce Urinary Tract Infection in Patients With Spinal Cord Lesions: A Systematic Review.

Neurogenic bladder disorders are common among patients with spinal cord lesions, which often result in upper and lower urinary tract complications. Urinary tract infection has remained the most frequent type of infection in this population. Our aim is to review systematically the literature on the outcome of different intervention methods to reduce urinary tract infection incidence. A literature search was conducted in the database of Medline, PubMed, Embase, and Scopus. After screening 1559 articles, 42 were included in this review. The intervention methods can be categorized into the four following groups: (1) indwelling catheterization and intermittent catheterization, (2) medications, (3) surgery, and (4) others. Intermittent catheterization is still the most recommended treatment for persons with spinal cord lesions. Hydrophilic catheters are more suitable for adults than children because of complex handling. Bladder management with spontaneous voiding is initially considered for infants and toddlers with spina bifida. Antibiotics treatment should be based on the results of urine cultures. Shortening the course of antibiotics treatment can reduce its adverse effects but may increase urinary tract infection recurrence. Because botulinum toxin injections and bladder surgery can improve urodynamic function, both are conducive toward lowering urinary tract infection incidence.

Magnetic Anisotropy of a Quasi Two-Dimensional Canted Antiferromagnet.

We report the control of the interplane magnetic exchange coupling in CaIrO3 perovskite thin films and superlattices with SrTiO3. By analyzing the anisotropic magneto-transport data, we demonstrate that a semimetallic paramagnetic CaIrO3 turns into a canted antiferromagnetic Mott insulator at reduced dimensions. The emergence of a biaxial magneto-crystalline anisotropy indicates the canted moment responding to the cubic symmetry. Extending to superlattices and probing oxygen octahedral rotation by half-integer X-ray Braggs diffraction, a more complete picture about the canted moment evolution with interplane coupling can be understood. Remarkably, a rotation of the canted moments' easy axes by 45° is also observed by a sign reversal of the in-plane strain. These results demonstrate the robustness of anisotropic magnetoresistance in revealing quasi two-dimensional canted antiferromagnets, as well as valuable insights about quadrupolar magnetoelastic coupling, relevant for designing future antiferromagnetic spintronic devices.

Erasable and recreatable two-dimensional electron gas at the heterointerface of SrTiO3 and a water-dissolvable overlayer.

While benefiting greatly from electronics, our society also faces a major problem of electronic waste, which has already caused environmental pollution and adverse human health effects. Therefore, recyclability becomes a must-have feature in future electronics. Here, we demonstrate an erasable and recreatable two-dimensional electron gas (2DEG), which can be easily created and patterned by depositing a water-dissolvable overlayer of amorphous Sr3Al2O6 (a-SAO) on SrTiO3 (STO) at room temperature. The 2DEG can be repeatedly erased or recreated by depositing the a-SAO or dissolving in water, respectively. Photoluminescence results show that the 2DEG arises from the a-SAO-induced oxygen vacancy. Furthermore, by gradually depleting the 2DEG, a transition of nonlinear to linear Hall effect is observed, demonstrating an unexpected interfacial band structure. The convenience and repeatability in the creation of the water-dissolvable 2DEG with rich physics could potentially contribute to the exploration of next generation electronics, such as environment-friendly or water-soluble electronics.

Modulation of New Excitons in Transition Metal Dichalcogenide-Perovskite Oxide System.

The exciton, a quasi-particle that creates a bound state of an electron and a hole, is typically found in semiconductors. It has attracted major attention in the context of both fundamental science and practical applications. Transition metal dichalcogenides (TMDs) are a new class of 2D materials that include direct band-gap semiconductors with strong spin-orbit coupling and many-body interactions. Manipulating new excitons in semiconducting TMDs could generate a novel means of application in nanodevices. Here, the observation of high-energy excitonic peaks in the monolayer-MoS2 on a SrTiO3 heterointerface generated by a new complex mechanism is reported, based on a comprehensive study that comprises temperature-dependent optical spectroscopies and first-principles calculations. The appearance of these excitons is attributed to the change in many-body interactions that occurs alongside the interfacial orbital hybridization and spin-orbit coupling brought about by the excitonic effect propagated from the substrate. This has further led to the formation of a Fermi-surface feature at the interface. The results provide an atomic-scale understanding of the heterointerface between monolayer-TMDs and perovskite oxide and highlight the importance of spin-orbit-charge-lattice coupling on the intrinsic properties of atomic-layer heterostructures, which open up a way to manipulate the excitonic effects in monolayer TMDs via an interfacial system.

Controlling the Magnetic Properties of LaMnO3 /SrTiO3 Heterostructures by Stoichiometry and Electronic Reconstruction: Atomic-Scale Evidence.

Interface-driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking are of importance for fundamental physics and device applications. How interfaces affect the interplay between charge, spin, orbital, and lattice degrees of freedom is the key to boosting device performance. In LaMnO3 /SrTiO3 (LMO/STO) polar-nonpolar heterostructures, electronic reconstruction leads to an antiferromagnetic to ferromagnetic transition, making them viable for spin filter applications. The interfacial electronic structure plays a critical role in the understanding of the microscopic origins of the observed magnetic phase transition, from antiferromagnetic at 5 unit cells (ucs) of LMO or below to ferromagnetic at 6 ucs or above, yet such a study is missing. Here, an atomic scale understanding of LMO/STO ambipolar ferromagnetism is offered by quantifying the interface charge distribution and performing first-principles density functional theory (DFT) calculations across this abrupt magnetic transition. It is found that the electronic reconstruction is confined within the first 3 ucs of LMO from the interface, and more importantly, it is robust against oxygen nonstoichiometry. When restoring stoichiometry, an enhanced ferromagnetic insulating state in LMO films with a thickness as thin as 2 nm (5 uc) is achieved, making LMO readily applicable as barriers in spin filters.

Dielectric resonator method for determining gap symmetry of superconductors through anisotropic nonlinear Meissner effect.

We present a new measurement method which can be used to image the gap nodal structure of superconductors whose pairing symmetry is under debate. This technique utilizes a high quality factor microwave resonance involving the sample of interest. While supporting a circularly symmetric standing wave current pattern, the sample is perturbed by a scanned laser beam, creating a photoresponse that was previously shown to reveal the superconducting gap anisotropy. Simulation and the measurement of the photoresponse of an unpatterned Nb film show less than 8% anisotropy, as expected for a superconductor with a nearly isotropic energy gap along with expected systematic uncertainty. On the other hand, measurement of a YBa2Cu3O7-δ thin film shows a clear 4-fold symmetric image with ∼12.5% anisotropy, indicating the well-known 4-fold symmetric dx2-y2 gap nodal structure in the ab-plane. The deduced gap nodal structure can be further cross-checked by low temperature surface impedance data, which are simultaneously measured. The important advantage of the presented method over the previous spiral resonator method is that it does not require a complicated lithographic patterning process which limits one from testing various kinds of materials due to photoresponse arising from patterning defects. This advantage of the presented technique, and the ability to measure unpatterned samples such as planar thin films and single crystals, enables one to survey the pairing symmetry of a wide variety of unconventional superconductors.

Ferromagnet/Two-Dimensional Semiconducting Transition-Metal Dichalcogenide Interface with Perpendicular Magnetic Anisotropy.

Ferromagnet/two-dimensional transition-metal dichalcogenide (FM/2D TMD) interfaces provide attractive opportunities to push magnetic information storage to the atomically thin limit. Existing work has focused on FMs contacted with mechanically exfoliated or chemically vapor-deposition-grown TMDs, where clean interfaces cannot be guaranteed. Here, we report a reliable way to achieve contamination-free interfaces between ferromagnetic CoFeB and molecular-beam epitaxial MoSe2. We show a spin reorientation arising from the interface, leading to a perpendicular magnetic anisotropy (PMA), and reveal the CoFeB/2D MoSe2 interface allowing for the PMA development in a broader CoFeB thickness-range than common systems such as CoFeB/MgO. Using X-ray magnetic circular dichroism analysis, we attribute generation of this PMA to interfacial d-d hybridization and deduce a general rule to enhance its magnitude. We also demonstrate favorable magnetic softness and considerable magnetic moment preserved at the interface and theoretically predict the interfacial band matching for spin filtering. Our work highlights the CoFeB/2D MoSe2 interface as a promising platform for examination of TMD-based spintronic applications and might stimulate further development with other combinations of FM/2D TMD interfaces.

Superhydrophobic foam prepared from high internal phase emulsion templates stabilised by oyster shell powder for oil-water separation.

In this paper, poly(styrene-divinylbenzene) foams were synthesized using a high internal phase emulsion (HIPE) technique with Span 80 and with 900 °C calcined oyster shell powder as a co-emulsifier, 2,2'-azobisisobutyronitrile (AIBN) as an initiator and deionized water as the dispersing phase. SEM images revealed that the materials possess a hierarchical porous structure of nano/micro size, which resulted in saturated oil adsorption in only half a minute. The dispersing phase amount was investigated for its effect on adsorption. The optimized foams have 24.8-58.3 g g-1 adsorbencies for several organic solvents, and they demonstrated superhydrophobicity and excellent oleophilicity with the water contact angle (WCA) even close to 149° and oil contact angle approaching 0°. Moreover, the foams displayed high oil retention under pressure. The adsorption-centrifugation cycling results indicated high repeatability of the recovered foams. All of these features predicted the potential applications of superhydrophobic foams in oil-water separation.

Anatase TiO2-A Model System for Large Polaron Transport.

Large polarons have been of significant recent technological interest as they screen and protect electrons from point-scattering centers. Anatase TiO2 is a model system for studying large polarons as they can be studied systematically over a wide range of temperature and carrier density. The electronic and magneto transport properties of reduced anatase TiO2 epitaxial thin films are analyzed considering various polaronic effects. Unexpectedly, with increasing carrier concentration, the mobility increases, which rarely happens in common metallic systems. We find that the screening of the electron-phonon (e-ph) coupling by excess carriers is necessary to explain this unusual dependence. We also find that the magnetoresistance could be decomposed into a linear and a quadratic component, separately characterizing the carrier transport and trapping as a function of temperature, respectively. The various transport behaviors could be organized into a single phase diagram, which clarifies the evolution of large polaron in this material.

Interface-Induced Enhancement of Ferromagnetism in Insulating LaMnO3 Ultrathin Films.

Engineering ferromagnetism, by modulating its magnitude or anisotropy, is an important topic in the field of magnetism and spintronics. Among different types of magnetic materials, ferromagnetic insulators, in which magnetic moment unusually coexists with localized electrons, are of particular interest. Here, we report a remarkable interfacial enhancement of the ferromagnetism by adding one unit-cell LaAlO3 adjacent to an insulating LaMnO3 ultrathin film. The enhancement of ferromagnetism is explained in terms of charge transfer at the interface, as evidenced by X-ray absorption spectroscopy and ab initio calculations. This study demonstrates an effective and dramatic approach to modulate the functionality of ferromagnetic insulators, contributing to the arsenal of engineering techniques for future spintronics.