ABSTRACT
This work proposes a novel method to determine the Cd(II) and Cr(III) content in commercial sugar samples. It is based on the extraction of the analytes (as ammonium pyrrolidine dithiocarbamate complexes) into a semipermeable membrane device (SPMD) filled with CHCl3. After extraction, the SPMD was deployed and opened, and the analytes were recovered from the organic phase by back extraction with a 4.2 mol L-1 HNO3 solution. The analytes present in the acid extract were measured with graphite furnace atomic absorption spectrometry. Under optimized conditions, the limit of quantification of the method was 1.2 and 3.1 ng g-1 for Cd(II) and Cr(III), respectively. Twelve samples of different types of sugar were analyzed. In addition, a recovery test was performed to evaluate the accuracy of the method. The recovery percentage was 90 %-102 % for Cd(II) and 85.2 %-103 % for Cr(III).
ABSTRACT
The Deepwater Horizon (DWH) oil spill from April to July of 2010 contaminated Gulf of Mexico waters through release of an estimated 4.1â¯×â¯106 barrels of oil. Beginning in June of 2010, semipermeable membrane devices (SPMDs) were deployed near areas with sensitive marine habitats (Alabama Alps and Western Shelf) potentially exposed to that oil. Elevated TPAH50 concentrations, flux rates and similarity of histograms and diagnostic ratios for polycyclic aromatic hydrocarbons (PAH) from SPMDs to weathered floating oil collected during the DWH spill indicates the Alabama Alps habitats were affected. While not affected by oil from the DWH spill, the temporal pattern of PAH contamination of SPMDs deployed near the Western Shelf between July 2010 and March 2011 could indicate prevailing currents affected contaminant transport to the Western Shelf Area (East and West Flower Garden, Sonnier, and Stetson Banks) from non-DWH sources, including oil and gas exploration, shipping, and Mississippi River effluent.