Characteristic study of biological CaCO3-supported nanoscale zero-valent iron: stability and migration performance.

nZVI has attracted much attention in the remediation of contaminated soil and groundwater, but the application is limited due to its aggregation, poor stability, and weak migration performance. The biological CaCO3 was used as the carrier material to support nZVI and solved the nZVI agglomeration, which had the advantages of biological carbon fixation and green environmental protection. Meanwhile, the distribution of nZVI was characterised by SEM-EDS and TEM carefully. Subsequently, the dispersion stability of bare nZVI and CaCO3@nZVI composite was studied by the settlement experiment and Zeta potential. Sand column and elution experiments were conducted to study the migration performance of different materials in porous media, and the adhesion coefficient and maximum migration distances of different materials in sand columns were explored. SEM-EDS and TEM results showed that nZVI could be uniformly distributed on the surface of biological CaCO3. Compared with bare nZVI, CaCO3@nZVI composite suspension had better stability and higher absolute value of Zeta potential. The migration performance of nZVI was poor, while CaCO3@nZVI composite could penetrate the sand column and have good migration performance. What's more, the elution rates of bare nZVI and CaCO3@nZVI composite in quartz sand columns were 5.8% and 51.6%, and the maximum migration distances were 0.193 and 0.885 m, respectively. In summary, this paper studies the stability and migration performance of bare nZVI and CaCO3@nZVI composite, providing the experimental and theoretical support for the application of CaCO3@nZVI composite, which is conducive to promoting the development of green remediation functional materials.

Advances in aldo-keto reductases immobilization for biocatalytic synthesis of chiral alcohols.

Chiral alcohols are essential building blocks of numerous pharmaceuticals and fine chemicals. Aldo-keto reductases (AKRs) constitute a superfamily of oxidoreductases that catalyze the reduction of aldehydes and ketones to their corresponding alcohols using NAD(P)H as a coenzyme. Knowledge about the crucial roles of AKRs immobilization in the biocatalytic synthesis of chiral alcohols is expanding. Herein, we reviewed the characteristics of various AKRs immobilization approaches, the applications of different immobilization materials, and the prospects of continuous flow bioreactor construction by employing these immobilized biocatalysts for synthesizing chiral alcohols. Finally, the opportunities and ongoing challenges for AKR immobilization are discussed and the outlook for this emerging area is analyzed.

Potential of Drought Tolerant Rhizobacteria Amended with Biochar on Growth Promotion in Wheat.

Drought stress is the prime obstacle for worldwide agricultural production and necessitates innovative strategies for enhancing crop resilience. This study explores the efficacy of plant growth-promoting rhizobacteria (PGPR) and biochar (BC) as sustainable amendments for mitigating the effects of drought on wheat growth. Multiple experiments were carried out on isolated strains to assess their drought tolerance potential and multiple plant growth-promoting attributes. Experiments in the laboratory and natural environment were conducted to assess the impact of plant growth-promoting rhizobacteria, biochar, and their synergistic application on various growth parameters of wheat. The results revealed that the drought-tolerant PGPR strains (Bacillus subtilis and Bacillus tequilensis), alongside biochar (rice husk), alleviated the phytotoxic impact of drought by increasing the root length from 17.0% to 70.0% and shoot length from 30.0% to 82.0% as compared to un-inoculated stressed controls. The total chlorophyll and carotenoid contents of the plants were substantially increased to 477% and 423%, respectively, when biochar and PGPR were applied synergistically. Significant enhancements in membrane stability index, relative water content, proline, and sugar level were achieved by combining biochar and bacterial strains, resulting in increases of 19.5%, 37.9%, 219%, and 300%, respectively. The yield of wheat in terms of plant height, spike length, number of spikelets per spike, and number of grains per spike was enhanced from 26.7% to 44.6%, 23.5% to 62.7%, 91.5% to 154%, and 137% to 182%, respectively. It was concluded that the biochar-based application of PGPR induced drought tolerance in wheat under water deficit conditions, ultimately improving the production and yield of wheat.

The Injection of Gels Through an Intact Annulus Maintains Biomechanical Performance without Extrusion Risk.

For autologous-disc-derived chondrocyte transplantation (ADCT) a transglutaminase crosslinked gelatine gel and an albumin hyaluronic acid gel, crosslinked with bis-thio-polyethylene glycol, were injected through a syringe into a degenerated intervertebral disc, where they solidified in situ. This biomechanical in vitro study with lumbar bovine motion segments evaluated disc height changes, motion characteristics in a quasi-static spine loading simulators, and the potential extrusion risk of these biomaterials in a complex dynamic multi-axial loading set-up with 100,000 loading cycles. After the injection and formation of the gel in the center of the nucleus, the disc height increase was about 0.3 mm. During cyclic testing, a gradual decrease in height could be detected due to viscoelastic effects and fluid loss. No gel extrusion could be observed for all specimens during the entire test procedure. A macroscopic inspection after dissections showed an accumulation of the solidified gel in the center of the nucleus. The results demonstrate that the injection of in situ solidifying gels through the intact annulus allows for the stable maintenance of the injected gel at the target location, with high potential for use as a suitable scaffold to anchor therapeutically applied cells for disc regeneration within the treated nucleus pulposus.

Stabilizing interactions of casein microparticles after a thermal post-treatment.

Casein microparticles from milk are important carrier materials for bioactive substances with stability and swelling properties that can be influenced by heat treatment. Microparticles produced by depletion flocculation and film drying remain stable in acidic media but swell and disintegrate under slightly alkaline conditions. Heat treatment after formation can stabilize the microparticles via a disulfide bridge network and newly formed hydrophobic contacts. Temperatures >60 °C are required so that denatured whey protein initiate formation of disulfide bridges via thiol exchange reactions. The particles then swell in a two-step process and exhibit an overshooting effect. If formation of disulphide bridges is prevented during heat treatment by adding N-methylmaleimide, overshooting swelling disappears and microparticles continue to expand instead. The analysis with parallel system dynamics models is based on the swelling of uncross-linked caseins, which is limited by the expansion capacity of cross-linked caseins.

Recent development of carrier materials in anthocyanins encapsulation applications: A comprehensive literature review.

Anthocyanins are natural polyphenols belonging to the flavonoid family that possess a variety of putative health benefits when consumed in a balanced diet. However, applications of anthocyanins in, for example, functional foods are limited due to poor stability, degradation, and low transmembrane efficiency. To maintain bioactivities of anthocyanins and optimize their use, various carrier materials have been developed. Here, we reviewed the uses of the different carrier materials (organic/inorganic, micro/nano) for anthocyanin encapsulation and delivery over the past five years. The performance of different materials and interactions between anthocyanins and these materials are described. Lastly, we give our perspective on the future development trend of anthocyanin encapsulation strategies.

Effect of type of carrier material on the in vitro properties of solid dispersions of progesterone / 药学学报

This study investigated the effect of different carrier materials on the in vitro properties of progesterone solid dispersions. The solid dispersions of the insoluble drug progesterone were prepared by hot melt extrusion technique using rheological properties as the index of investigation, and the in vitro properties of the solid dispersions were characterized. Scanning electron microscope revealed solid dispersions with rough surfaces and agglomerated microstructures into irregular lumpy particles. Differential scanning calorimetry and powder X-ray diffraction showed the change of progesterone crystalline form in solid dispersions from crystalline to amorphous state. In vitro dissolution studies showed that solid dispersions prepared with different carrier materials can effectively improve the dissolution rate of drugs. The results of the study showed that the type of carrier material had a significant effect on the in vitro properties of solid dispersions, providing a reference for the study of solid dispersions in the controlled release of insoluble drugs.

[Research progress of coarse-grained molecular dynamics in drug carrier materials].

As one of the traditional computer simulation techniques, molecular simulation can intuitively display and quantify molecular structure and explain experimental phenomena from the microscopic molecular level. When the simulation system increases, the amount of calculation will also increase, which will cause a great burden on the simulation system. Coarse-grained molecular dynamics is a method of mesoscopic molecular simulation, which can simplify the molecular structure and improve computational efficiency, as a result, coarse-grained molecular dynamics is often used when simulating macromolecular systems such as drug carrier materials. In this article, we reviewed the recent research results of using coarse-grained molecular dynamics to simulate drug carriers, in order to provide a reference for future pharmaceutical preparation research and accelerate the entry of drug research into the era of precision drug design.

Enhanced cadmium phytoextraction efficiency of ryegrass (Lolium perenne L.) by porous media immobilized Enterobacter sp. TY-1.

Although studies on immobilized microorganisms have been conducted, their performance remains unclear for enhancing plants to remediate cadmium (Cd)-contaminated soil. In this study, a Cd-resistant strain TY-1 with good plant growth promotion traits was immobilized by biochar (BC) or oyster shell (OS) power to strengthen ryegrass to remediate Cd-contaminated soil. SEM-EDS combined with FTIR showed that TY-1 could tolerate Cd toxicity by surface precipitation, and functional groups such as hydroxyl and carbonyl groups might be involved. In the biocomposite treatments, soil pH increased, and the activity of fertility-related enzymes such as dehydrogenase increased by 109.01%-128.01%. The relative abundance of genus Saccharimonadales decreased from 7.97% to 3.35% in BS-TY and 2.61% in OS-TY, respectively. Thus, a suitable environment for ryegrass growth was created. The fresh weight, dry weight, plant height and Cd accumulation of ryegrass in TY treatment increased by 122.92%, 114.81%, 42.08% and 8.05%, respectively, compared to the control. Cd concentration in ryegrass was further increased in BC-TY and OS-TY by 24.14% and 40.23%, respectively. The improvement in soil microcosm and plant biomass forms an ongoing virtuous cycle, demonstrating that using carrier materials to improve the efficiency of microbial-assisted phytoremediation is realistic and feasible.

Advances in bone regeneration with growth factors for spinal fusion: A literature review.

Bone tissue is regenerated via the spatiotemporal involvement of various cytokines. Among them, the bone morphogenetic protein (BMP), which plays a vital role in the bone regeneration process, has been applied clinically for the treatment of refractory orthopedic conditions. Although BMP therapy using a collagen carrier has shown efficiency in bone regeneration over the last two decades, a major challenge-considerable side effects associated with the acute release of high doses of BMPs-has also been revealed. To improve BMP efficiency, the development of new carriers and biologics that can be used in conjunction with BMPs is currently underway. In this review, we describe the current status and future prospects of bone regeneration therapy, with a focus on BMPs. Furthermore, we outline the characteristics and molecular signaling pathways involving BMPs, clinical applications of BMPs in orthopedics, clinical results of BMP use in human spinal surgeries, drugs combined with BMPs to provide synergistic effects, and novel BMP carriers.

Research progress of coarse-grained molecular dynamics in drug carrier materials / 生物医学工程学杂志

As one of the traditional computer simulation techniques, molecular simulation can intuitively display and quantify molecular structure and explain experimental phenomena from the microscopic molecular level. When the simulation system increases, the amount of calculation will also increase, which will cause a great burden on the simulation system. Coarse-grained molecular dynamics is a method of mesoscopic molecular simulation, which can simplify the molecular structure and improve computational efficiency, as a result, coarse-grained molecular dynamics is often used when simulating macromolecular systems such as drug carrier materials. In this article, we reviewed the recent research results of using coarse-grained molecular dynamics to simulate drug carriers, in order to provide a reference for future pharmaceutical preparation research and accelerate the entry of drug research into the era of precision drug design.

Surface modification of two-dimensional layered double hydroxide nanoparticles with biopolymers for biomedical applications.

Layered double hydroxides (LDHs) are appealing nanomaterials for (bio)medical applications and their potential is threefold. One can gain advantage of the structure of LDH frame (i.e., layered morphology), anion exchanging property towards drugs with acidic character and tendency for facile surface modification with biopolymers. This review focuses on the third aspect, as it is necessary to evaluate the advantages of polymer adsorption on LDH surfaces. Beside the short discussion on fundamental and structural features of LDHs, LDH-biopolymer interactions will be classified in terms of the effect on the colloidal stability of the dispersions. Thereafter, an overview on the biocompatibility and biomedical applications of LDH-biopolymer composite materials will be given. Finally, the advances made in the field will be summarized and future research directions will be suggested.

The Incidence of Severe Hypercalcaemia-Induced Mental Status Changes in Patients Treated with Antibiotic-Loaded Calcium Sulphate Depot for Orthopaedic Infections.

Local application of antibiotics with calcium-containing carrier materials (CCCM) might deliver large quantities of calcium, with some cases of hypercalcaemia reported. The incidence of symptomatic hypercalcaemia was estimated retrospectively in a consecutive, prospective series of patients treated between 10/2006 and 02/2019 with antibiotic-loaded CCCM for various orthopaedic infections. Risk factors were analysed. In the study period, 215 CCCM applications were performed. Two patients (0.9%) developed symptomatic hypercalcaemia. In one case, hypercalcaemia occurred 14 days after a second CCCM application during a staged septic hip revision. In the other case, hypercalcaemia became symptomatic six days after application of vancomycin-loaded CCCM in a component-retaining septic revision hip arthroplasty. In both cases, hypercalcemia was not imputable solely to the CCCM. Prolonged immobilization, renal impairment and other specific risk factors were present. Implantation of a CCCM for local application of antibiotics exposes the patient to large quantities of calcium during dissolution. This might induce symptomatic hypercalcaemia, a potentially life-threatening complication. The observed incidence of symptomatic hypercalcaemia remained rare (<1%). In some patients, compensatory mechanisms might be overwhelmed in the presence of other risk factors. Postoperative monitoring of calcaemia as well as elimination of risk factors is mandatory for all patients treated with CCCM.

Multifunctional manganese-containing vaccine delivery system Ca@MnCO3/LLO for tumor immunotherapy.

The ideal vaccine delivery systems can not only deliver antigens in intelligent manners but also act as adjuvants. Recently found that Mn2+ can effectively stimulate anti-tumor immune responses, and Ca2+ can regulate autophagy to promote the cross-presentation of antigens. Thus, we constructed such a manganese-containing multimode vaccine delivery system by using calcium-doped manganese carbonate microspheres (Ca@MnCO3) and perforin-listeria hemolysin (LLO), as termed as Ca@MnCO3/LLO. The two components Ca@MnCO3 and LLO, not only act as vaccine adjuvants by themselves, but also contribute to achieve cellular immunity. Among them, Ca@MnCO3 microspheres as an excellent Mn2+ and Ca2+ reservoir, can continuously release adjuvants Mn2+ and Ca2+ to enhance immune response in dendritic cells, while LLO can contribute to induce lysosomal escape. Particularly, Ca2+ was added firstly to MnCO3 microspheres to improve the stability and load capacity of the microspheres. Along with the degradation of intracellular Ca@MnCO3 microspheres, and the lysosomal membrane-lytic effects of perforin LLO, the Mn2+, Ca2+ and OVA were released to the cytoplasm. These outcomes cooperatively promote antigen cross-presentation, elicit CD8+ T cell proliferation, and finally achieve prominent anti-tumor effects. The results indicate that the manganese-containing vaccine delivery system Ca@MnCO3/LLO provides a promising platform for the construction of tumor vaccines.

Efficacy of organic-based carrier material for plant beneficial rhizobacteria application in okra under normal and salt-affected soil conditions.

AIMS: Plant beneficial rhizobacteria (PBR) improve salt tolerance and plant yield in vegetable plants by producing 1-aminocyclopropane-1-carboxylate-deaminase, indole-3-acetic acid and phosphate solubilization. Organic-based carrier material is needed to ensure the PBR's uniform application, distribution, survival and functioning in a variety of fields. The PBR also use carbon present in the carrier as food and energy source. The selection of a suitable organic-based carrier material for the application of the PBR in normal and saline soils always has received less attention. The current study compared the PBR suitability of different organic-based carrier materials (biochar, biogas residues [BGRs] and coconut powder) and evaluated their effects on okra productivity under normal and saline soil conditions. METHODS AND RESULTS: In a pot experiment, the PBR strain Bacillus sp. MR-1/2 (accession number, MG548383) was applied with/or without organic-based carrier materials to okra grown in three different soils: S1 (EC 1.0 dS m-1 ), S2 (EC 3.0 dS m-1 ) and S3 (EC 5.0 dS m-1 ). The experiment was set up in a completely randomized design with five replicates in factorial arrangement. Results indicated that in soil S1, PBR + BGR increased the number of pods per plant, plant dry weight and indole compounds by 64%, 68% and 17% while reduced the electrolyte leakage (ELL), malonaldehyde (MDA) contents and stress ethylene level by 17%, 55% and 38%, respectively over the PBR application without any carrier. Similarly, in soil S2, the treatment PBR + BGR increased the number of pods by 81%, plant dry weight by 40% and indole compounds by 13% while reduced the ELL by 17%, MDA contents by 50% and stress ethylene by 30% over the PBR alone treatment. In soil S3, PBR + biochar increased the number of pods by 51%, plant dry weight by 62% and indole compounds by 20%, while reduced the ELL by 21%, MDA by 40% and indole compounds by 54% over the PBR alone treatment. CONCLUSIONS: Results concluded that in soil S1 and S2 (normal soils), BGR as carrier for PBR showed best results, while in soil S3, biochar as carrier for PBR resulted in enhanced potassium (K+ ) and calcium (Ca+2 ) uptake and increased the productivity of okra. SIGNIFICANCE AND IMPACT OF STUDY: Response of different carrier materials in supporting PBR under different soil conditions was variable. This study will help in the selection and use of best suitable carrier material for PBR application under different soil conditions. It is recommended that farmer should use BGR as carrier material for PBR application in normal soils while biochar should be used as carrier for the PBR application in saline soil.

Effect of carrier material on the thermodynamic properties and recrystallization kinetics of andrographolide-solid dispersion.

OBJECTIVES: This work investigated the effect of the lipophilic long carbon chain of carrier material on the thermodynamic properties and the recrystallization kinetics of solid dispersion (SD). METHODS: The thermodynamic properties and recrystallization kinetic parameters of amorphous andrographolide (AG)-PEG8000 laurate (SM12)-SD, AG-PEG8000 palmitate (SM16)-SD and AG-PEG8000 behenate (SM22)-SD were determined and calculated by differential scanning calorimetry combining AGV equation and Avrami equation. KEY FINDINGS: From AG-SM12-SD to AG-SM22-SD with the increase of the carbon chain length of carrier material, the glass transition temperature, the maximum relaxation enthalpy and the mean relaxation time of SD increased at first and then decreased; the isothermal crystallization rate constants at different temperatures and non-isothermal crystallization rate constants at different heating rates of SD showed a trend of decreasing at first and then increasing. CONCLUSIONS: Increasing the carbon chain length of polyethylene glycol fatty acid ester can improve the space-limiting effect of the carrier material on the AG molecule, but the carbon chain length of carrier was not the longer the better. SM16 had the appropriate spatial scale, which better limited the molecular mobility of AG in SD, so AG-SM16-SD has better thermodynamic stability and recrystallization kinetic stability.

Bacterial biofilm and extracellular polymeric substances in the moving bed biofilm reactor for wastewater treatment: A review.

Among the several biofilm-based bioreactors, moving bed biofilm reactors (MBBR) have been extensively used for wastewater treatment due to low operational costs, technical feasibility, and stability. Biofilm forming strains, e.g., Stenotrophomonas maltophila DQ01, achieved 94.21% simultaneous nitrification and denitrification (SND) and 94.43% removal of total nitrogen (TN) at a cycle time of 7 h, and a biofilm consortium consisting of Chryseobacteriumsp. andRhodobactersp. achieved 86.8% removal of total organic carbon (TOC) at hydraulic retention time (HRT) of 24 h using lab-scale MBBR. Modifications in the surface properties of the biocarrier materials achieved 99.5 ± 1.1% chemical oxygen demand (COD) and 93.6 ± 2.3% NH4+-N removal, significantly higher than the conventional commercial carrier. This review article summarizes the application of MBBR technology for wastewater treatment. The importance of bacterial biofilm and extracellular polymeric substances (EPS), anammox-n-DAMO coupled processes, and carrier surface modifications in MBBR technology have also been discussed.

Bioremediation of oily seawater by Bacteria immobilization on a novel carrier material containing nutrients.

A novel carrier material was obtained by coating puffed rhubarb rice (PRR) with calcium alginate (CA) membrane. The carrier material was prepared to contain oil-degrading bacterial strains and inorganic nutrients through entrapping them in different locations. This formulation possessed floatability, biodegradability and nutrient slow-release properties. Therefore, it could be applied for oil biodegradation on seawater surfaces. For controlling the release rate of nutrients, the optimal preparation technique was established. The number of viable cells immobilized on the carrier material reached 2 × 109 CFU/g. This formulation could be stored at -20 °C for three months without a significant decrease in the number of viable immobilized cells (4 × 108 CFU/g). Scanning electron microscope (SEM) results showed that the cells were immobilized on the outer CA membrane, and the inorganic nutrients were entrapped in the inner PRR and CA membrane. The immobilized cells were able to remove 86% of the diesel oil at an initial diesel oil concentration of 1% (v/v), an incubation temperature of 37 °C, during three days of incubation. Gas chromatography-mass spectrometry (GC-MS) analysis results showed that most components of diesel oil were degraded by the formulations.

Research progress of silk fibroin-based nanoparticulate drug delivery systems / 药学学报

Silk fibroin is a natural polymer with certain water solubility, structural modification, good biocompatibility and biodegradability, which can be used as a drug delivery carrier material. As a promising drug delivery system, drug-loaded silk fibroin nanoparticles can control drug release, reduce toxicity and improve therapeutic effects. In this paper, the basic characteristics of silk fibroin, the preparation methods of drug-loaded silk fibroin nanoparticles and the application of silk fibroin in nanoparticulate drug delivery systems are reviewed, and on this basis, the further development of drug-loaded silk fibroin nanoparticles is prospected.

The Imprinted PARAFILM as a New Carrier Material for Dried Plasma Spots (DPSs) Utilizing Desorption Electrospray Ionization Mass Spectrometry (DESI-MS) in Phospholipidomics.

The application of desorption electrospray ionization mass spectrometry (DESI-MS) and dried blood spot (DBS) sampling has been successfully implemented several times. However, the difficulty of combining DBS sampling with DESI-MS is still the carrier material used for the blood samples. In this study, a new, easily obtained, and cost-effective carrier substrate for dried plasma spot (DPS) sampling and DESI-MS analysis and its application in phospholipidomics studies was described. First, the effects of several carrier materials, including cellulose-based materials (31 ET paper and filter paper) and non-cellulose-based materials (PARAFILM and its shape-modified material, PTFE-printed glass slide and polyvinylidene fluoride film), were tested. Second, a method combining DPS sampling with DESI-MS for phospholipidomics analysis was established, and parameters affecting compound signal intensities, such as sample volume and sprayer solvent system, were optimized. In conclusion, the total signal intensity obtained from shape-modified PARAFILM was the strongest. The suitable plasma sample volume deposited on PARAFILM carriers was 5 µl, and acetonitrile (ACN) was recommended as the optimal spray solvent for phospholipid (PL) profiling. Repeatability (87.5% of compounds with CV < 30%) and stability for data acquisition (48 h) were confirmed. Finally, the developed method was applied in phospholipidomics analysis of schistosomiasis, and a distinguished classification between control mice and infected mice was observed by using multivariate pattern recognition analysis, confirming the practical application of this new carrier material for DPS sampling and DESI-MS analysis. Compared with a previously reported method, the rapid metabolomics screening approach based on the implementation of DPS sampling coupled with the DESI-MS instrument developed in this study has increased analyte sensitivity, which may promote its further application in clinical studies.