Topical Cyclosporine in Oral Lichen Planus-A Series of 21 Open-Label, Biphasic, Single-Patient Observations.

Topical cyclosporine (CSA) has been reported as an alternative treatment in steroid-refractory oral lichen planus (OLP), but evidence is limited and conflicting. An N-of-1 trial setting could be appropriate to evaluate interindividual differences in treatment response. We studied a series of 21 open-label, biphasic single-patient observations. Patients (15 women, 6 men) with OLP recalcitrant to topical steroids received four weeks of CSA mouth rinse (200 mg/twice daily) followed by four weeks of drug withdrawal. Pain (visual analogue scale (VAS) score), disease extent (physicians' global assessment (PGA) score) and quality of life (Dermatology Life Quality Index (DLQI) score,) were assessed at baseline (T0), after four weeks of treatment (T1) and after another four weeks without treatment (T2). Median age was 58 years (interquartile range/IQR = 52-67) and median disease duration was 18 months (IQR = 12-44). Median baseline VAS score decreased significantly at T1 (p = 0.0003) and increased at T2 (p = 0.032) (T0 = 5 (IQR = 3-6.5); T1 = 2 (IQR = 0.5-3.4); T2 = 3 (IQR = 2-4.8)). Similarly, median baseline PGA score decreased significantly at T1 (p = 0.001) and increased at T2 (p = 0.007) (T0 = 2 (IQR = 1.3-2.5); T1 = 1 (IQR = 1-2); T2 = 2 (IQR = 1-2)). Median baseline DLQI score also decreased significantly at T1 (p =.027) but did not change at T2 (p = 0.5) (T0 = 2.5 (IQR = 1-5.8); T1 = 1 (IQR = 0-3); T2 = 1 (IQR = 1-4)). CSA responders (n = 16) had significantly higher median baseline VAS scores (5.2 (IQR = 5-6.5)) than nonresponders (n =5) (2 (IQR = 2-3.5) (p = 0.02). In our study, pain, disease extent and quality of life of patients with OLP improved significantly during therapy with low-dose CSA mouth rinse and exacerbated after drug withdrawal. Remarkably, patients with high initial VAS scores seemed to profit most.

Which substances loaded onto collagen scaffolds influence oral tissue regeneration?-an overview of the last 15 years.

BACKGROUND: Collagen scaffolds are widely used for guided bone or tissue regeneration. Aiming to enhance their regenerative properties, studies have loaded various substances onto these scaffolds. This review aims to provide an overview of existing literature which conducted in vitro, in vivo, and clinical testing of drug-loaded collagen scaffolds and analyze their outcome of promoting oral regeneration. MATERIALS AND METHODS: PubMed, Scopus, and Ovid Medline® were systematically searched for publications from 2005 to 2019. Journal articles assessing the effect of substances on oral hard or soft tissue regeneration, while using collagen carriers, were screened and qualitatively analyzed. Studies were grouped according to their used substance type-biological medical products, pharmaceuticals, and tissue-, cell-, and matrix-derived products. RESULTS: A total of 77 publications, applying 36 different substances, were included. Collagen scaffolds were demonstrating favorable adsorption behavior and release kinetics which could even be modified. BMP-2 was investigated most frequently, showing positive effects on oral tissue regeneration. BMP-9 showed comparable results at lower concentrations. Also, FGF2 enhanced bone and periodontal healing. Antibiotics improved the scaffold's anti-microbial activity and reduced the penetrability for bacteria. CONCLUSION: Growth factors showed promising results for oral tissue regeneration, while other substances were investigated less frequently. Found effects of investigated substances as well as adsorption and release properties of collagen scaffolds should be considered for further investigation. CLINICAL RELEVANCE: Collagen scaffolds are reliable carriers for any of the applied substances. BMP-2, BMP-9, and FGF2 showed enhanced bone and periodontal healing. Antibiotics improved anti-microbial properties of the scaffolds.

The impact of clay-based hypoxia mimetic hydrogel on human fibroblasts of the periodontal soft tissue.

Thixotropic clays have favorable properties for tissue regeneration. Hypoxia mimetic agents showed promising results in pre-clinical models for hard and soft tissue regeneration. It is unclear if clays can be used as carrier for hypoxia mimetic agent in a periodontal regenerative setting. Here, we tested the response of human fibroblasts of the periodontal soft tissue to synthetic clay hydrogels and assessed hypoxia mimetic agent release. Cells were cultured on synthetic clay hydrogels (5.00%-0.15%). We assessed viability and differentiation capacity with resazurin-based toxicity assays, MTT staining, Live-Dead staining, and alkaline phosphatase staining. To reveal the response of fibroblasts to hypoxia mimetic agent-loaded clay hydrogels, cells were exposed to clay supplemented with dimethyloxalylglycine, deferoxamine, l-mimosine, and CoCl2. Supernatants from hypoxia mimetic agent-loaded clay hydrogels were harvested and replaced with medium at hour 1, 3, 6, 24, 48, and 72. To reveal the hypoxia mimetic capacity of supernatants, vascular endothelial growth factor production in the fibroblasts was assessed in the culture medium. Our data show that clay did not induce relevant toxic effects in the fibroblasts which remained capable to differentiate into alkaline phosphatase-positive cells at the relevant concentrations. Fibroblasts cultured on clay hydrogel loaded with dimethyloxalylglycine, deferoxamine, l-mimosine, and CoCl2 remained vital, however, no significant increase in vascular endothelial growth factor levels was found in the culture medium. Only dimethyloxalylglycine-loaded clay supernatants taken in the first hours stimulated vascular endothelial growth factor production in fibroblasts. In conclusion no pronounced toxic effects of synthetic clay were observed. Supplementation with dimethyloxalylglycine leads to hypoxia mimetic activity. This pilot study provides first insights into the impact of synthetic clay on periodontal tissue.

Angiogenin production in response to hypoxia and l-mimosine in periodontal fibroblasts.

BACKGROUND: A major mediator of angiogenesis is angiogenin, which is expressed in the early phase of healing in oral tissue engineering strategies. It is unclear how angiogenin is regulated in the periodontal tissue. The objective of this study was to reveal the regulation of angiogenin in response to hypoxia and the hypoxia mimetic agent l-mimosine in periodontal fibroblasts. METHODS: Human fibroblasts of the periodontal ligament (PDLF) and the gingiva (GF) in monolayer and spheroid cultures were exposed to hypoxia or l-mimosine. The production of angiogenin was evaluated at mRNA and protein levels with reverse transcription quantitative polymerase chain reaction and enzyme-linked immunosorbent assays, respectively. Echinomycin, an inhibitor of hypoxia-inducible factor (HIF)-1 activity, was used to test the involvement of HIF-1. RESULTS: Our data show that hypoxia and l-mimosine can increase angiogenin mRNA and protein levels in PDLF monolayer cultures. In GF monolayer cultures, we found an increase of angiogenin at the mRNA level in response to hypoxia. The increase of angiogenin can be blocked by inhibition of HIF-1 signaling via echinomycin. In PDLF and GF spheroid cultures, the impact of hypoxia and l-mimosine did not reach the level of significance. CONCLUSION: Hypoxia and the hypoxia mimetic agent l-mimosine can increase the production of angiogenin via HIF-1 signaling in PDLF monolayer cultures but not in spheroid cultures. GF were less sensitive to the impact of hypoxia and l-mimosine. Overall, these results suggest a link between hypoxia, HIF-1 signaling and angiogenin in the periodontium.

3D Printing-Encompassing the Facets of Dentistry.

This narrative review presents an overview on the currently available 3D printing technologies and their utilization in experimental, clinical and educational facets, from the perspective of different specialties of dentistry, including oral and maxillofacial surgery, orthodontics, endodontics, prosthodontics, and periodontics. It covers research and innovation, treatment modalities, education and training, employing the rapidly developing 3D printing process. Research-oriented advancement in 3D printing in dentistry is witnessed by the rising number of publications on this topic. Visualization of treatment outcomes makes it a promising clinical tool. Educational programs utilizing 3D-printed models stimulate training of dental skills in students and trainees. 3D printing has enormous potential to ameliorate oral health care in research, clinical treatment, and education in dentistry.

Synthetic Clay-based Hypoxia Mimetic Hydrogel for Pulp Regeneration: The Impact on Cell Activity and Release Kinetics Based on Dental Pulp-derived Cells In Vitro.

INTRODUCTION: Thixotropic synthetic clays have been successfully used for tissue engineering in regenerative medicine. The impact of these clays on the dental pulp, in particular in combination with hypoxia-based approaches using hypoxia mimetic agents (HMAs), is unknown. Our aim was to reveal the response of dental pulp-derived cells (DPCs) to a synthetic clay-based hydrogel and evaluate the release of HMAs. METHODS: Using resazurin-based toxicity assays, live-dead staining, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide staining, the viability of human DPCs seeded onto a synthetic clay-based hydrogel of 5%-0.15% as well as onto the hydrogels loaded with the HMAs dimethyloxalylglycine (DMOG), desferrioxamine, L-mimosine, and CoCl2 was evaluated. Furthermore, supernatant of the hydrogels loaded with HMAs were generated. Vascular endothelial growth factor (VEGF) production of DPCs in response to the supernatant was measured to reveal the cellular response to the HMAs. RESULTS: We found that the synthetic clay-based hydrogel did not impair the viability of DPCs. Cell monolayer and cell cluster formations were observed on the hydrogel. No significant increase of VEGF levels was observed in the supernatant when DPCs were cultured on hydrogels loaded with HMAs. Supernatant of DMOG-loaded hydrogels stimulated VEGF production in DPCs in the first hour, whereas the effect of desferrioxamine, L-mimosine, and CoCl2 did not reach a level of significance. CONCLUSIONS: The synthetic clay-based hydrogel represents a promising biomaterial that does not induce prominent toxic effects in DPCs. It can be loaded with DMOG to induce hypoxia mimetic activity. Overall, we provided first insights into the impact of synthetic clays on DPCs for tissue engineering purposes in regenerative endodontics.

Collagen barrier membranes do not adsorb hypoxia mimetic activity-Activity of gingival fibroblasts cultured directly on collagen barrier membranes loaded with hypoxia mimetic agents.

Hypoxia-based strategies for applications in oral surgery and periodontology have been proposed where collagen barrier membranes (CBM) are loaded with hypoxia mimetic agents (HMA) to induce a pro-angiogenic response. While it was found that CBM release HMA, it remained unclear if CBM adsorb HMA activity. Here we evaluated the response of oral cells cultured on CBM, supplemented with the HMA dimethyloxalylglycine (DMOG), desferrioxamine (DFO), and l-mimosine (l-MIM). Gingival fibroblasts (GF) were cultured on unwashed CBM as well as on CBM that had been washed with serum-free medium for 48 hours. The pro-angiogenic response was measured based on vascular endothelial growth factor (VEGF) production. Viability and proliferation were assessed based on MTT and BrdU assays. We found that GF seeded onto CBM loaded with DFO and l-MIM, but not DMOG, showed an increase in VEGF to 6.1-fold and 7.7-fold compared to unloaded CBM, respectively. Cells remained vital, but a trend for decreased proliferation was observed on DMOG and DFO-loaded CBM which did not reach the level of significance. Evaluation of washed CBM revealed no difference between the unloaded CBM and CBM supplemented with DMOG, DFO, or l-MIM. In conclusion, our results suggest that CBM do not adsorb hypoxia mimetic activity but release HMA within the first hours. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 874-879, 2018.

Evaluation of Resins for Stereolithographic 3D-Printed Surgical Guides: The Response of L929 Cells and Human Gingival Fibroblasts.

Additive manufacturing is becoming increasingly important in dentistry for the production of surgical guides. The development of cost-effective desktop stereolithography (SLA) printing systems and the corresponding resins makes this novel technique accessible to dental offices and dental laboratories. The aim of the study was to reveal the response of soft tissue cells to Clear and Dental SG resins used in desktop SLA printing systems at different stages of processing. Cell activity of L929 cells and gingival fibroblasts (GF) in response to the materials was examined in indirect and direct monolayer culture models and a direct spheroid culture model based on MTT, resazurin-based toxicity assays, and live-dead staining. Overall we found that the impact of Clear and Dental SG resins on L929 and GF depends on the processing stage of the materials. Liquid Clear resin induced a stronger reduction of cell activity compared to Dental SG resin. Printing and postcuring reduced the impact on cell activity and viability. As in-house 3D printing for surgical guides is getting integrated in the digital workflow, our data suggest that careful adherence to processing guidelines-especially postcuring-is of clinical relevance.

L-mimosine and hypoxia can increase angiogenin production in dental pulp-derived cells.

BACKGROUND: Angiogenin is a key molecule in the healing process which has been successfully applied in the field of regenerative medicine. The role of angiogenin in dental pulp regeneration is unclear. Here we aimed to reveal the impact of the hypoxia mimetic agent L-mimosine (L-MIM) and hypoxia on angiogenin in the dental pulp. METHODS: Human dental pulp-derived cells (DPC) were cultured in monolayer and spheroid cultures and treated with L-MIM or hypoxia. In addition, tooth slice organ cultures were applied to mimic the pulp-dentin complex. We measured angiogenin mRNA and protein levels using qPCR and ELISA, respectively. Inhibitor studies with echinomycin were performed to reveal the role of hypoxia-inducible factor (HIF)-1 signaling. RESULTS: Both, L-MIM and hypoxia increased the production of angiogenin at the protein level in monolayer cultures of DPC, while the increase at the mRNA level did not reach the level of significance. The increase of angiogenin in response to treatment with L-MIM or hypoxia was reduced by echinomycin. In spheroid cultures, L-MIM increased angiogenin at protein levels while the effect of hypoxia was not significant. Angiogenin was also expressed and released in tooth slice organ cultures under normoxic and hypoxic conditions and in the presence of L-MIM. CONCLUSIONS: L-MIM and hypoxia modulate production of angiogenin via HIF-1 differentially and the response depends on the culture model. Given the role of angiogenin in regeneration the here presented results are of high relevance for pre-conditioning approaches for cell therapy and tissue engineering in the field of regenerative endodontics.

Hypoxia-based strategies for regenerative dentistry-Views from the different dental fields.

The understanding of the cell biological processes underlying development and regeneration of oral tissues leads to novel regenerative approaches. Over the past years, knowledge on key roles of the hypoxia-based response has become more profound. Based on these findings, novel regenerative approaches for dentistry are emerging, which target cellular oxygen sensors. These approaches include hypoxia pre-conditioning and pharmacologically simulated hypoxia. The increase in studies on hypoxia and hypoxia-based strategies in regenerative dentistry highlights the growing attention to hypoxia's role in regeneration and its underlying biology, as well as its application in a therapeutic setting. In this narrative review, we present the current knowledge on the role of hypoxia in oral tissues and review the proposed hypoxia-based approaches in different fields of dentistry, including endodontics, orthodontics, periodontics, and oral surgery.