RESUMEN
PURPOSE: This study aimed to evaluate the substitutive and additive efficacy of multi-peak light-emitting diode (LED) curing units for post-curing of a three-dimensional- (3D-) printed crown and bridge resin. METHODS: A total of 792 disc- and 180 bar-shaped specimens were printed with a crown and bridge resin (NextDent C&B MFH) and post-cured using two LED curing units (VALO Cordless and Bluephase N G4) in fast and standard modes. Conventional post-curing (LC-3D Print Box, Group PC) was compared with LED-only curing (Groups V1, V2, B1, and B2) and LED-combined curing (Groups PV1, PV2, PB1, and PB2) in terms of microhardness, flexural strength, degree of conversion (DC), and CIE L*a*b* color and translucency parameters. Cytotoxicity of the resin eluates was evaluated using the WST-1 assay. Temperature increases on the resin surface were measured with infrared thermography. Data were statistically analyzed using ANOVA and Kruskal-Wallis tests (α=0.05). RESULTS: The microhardness and flexural strength in Groups V1, V2, B1, and DC in all LED-only groups were lower than in other groups (p<0.05). Larger color disparities existed between Group PC and all LED-only groups than between Group PC and the others (p<0.05). There was no significant difference in cytotoxicity among the groups. The temperature increase was lowest in Groups V1 and PV1 during light curing (p<0.05). CONCLUSIONS: Post-curing by multi-peak LED curing units was not as effective as the conventional post-curing device. Additional post-curing by LED curing units did not improve the material properties.
Asunto(s)
Coronas , Luces de Curación Dental , Polimerizacion , Impresión Tridimensional , Ensayo de Materiales , Resinas Compuestas/uso terapéutico , Propiedades de Superficie , DurezaRESUMEN
The aims of this retrospective clinical study were to compare the longevities of direct posterior amalgam restorations (AMs) and resin composite restorations (RCs) that were subjected to occlusal stresses and to investigate variables predictive of their outcome. A total of 269 AMs and RCs filled in Class I and II cavities of posterior teeth were evaluated with Kaplan-Meier survival estimator and multivariate Cox proportional hazard model. Seventy-one retreated restorations were reviewed from dental records. The other 198 restorations still in use were evaluated according to modified US Public Health Service (USPHS) criteria by two investigators. The longevity of RCs was significantly lower than that of AMs (AM = 8.7 years and RC = 5.0 years, p<0.05), especially in molars. The prognostic variables, such as age, restorative material, tooth type, operator group, diagnosis, cavity classification, and gender, affected the longevity of the restorations (multivariate Cox regression analysis, p<0.05). However, among the restorations working in oral cavities, their clinical performance evaluated with modified USPHS criteria showed no statistical difference between both restoratives. In contrast to the short longevity of RCs relative to AMs, the clinical performance of RCs working in oral cavities was observed to be not different from that of AMs. This suggests that once a RC starts to fail, it happens in a rapid progression. As posterior esthetic restorations, RCs must be observed carefully with periodic follow-ups for early detection and timely repair of failures.
Asunto(s)
Resinas Compuestas/uso terapéutico , Amalgama Dental/uso terapéutico , Fracaso de la Restauración Dental/estadística & datos numéricos , Restauración Dental Permanente/métodos , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Niño , Estudios Transversales , Caries Dental , Análisis del Estrés Dental , Femenino , Humanos , Estimación de Kaplan-Meier , Masculino , Persona de Mediana Edad , Modelos de Riesgos Proporcionales , Estudios Retrospectivos , Factores de Tiempo , Adulto JovenRESUMEN
The aim of this retrospective clinical study was to compare the longevity of cervical restorations between resin composite (RC) and glass ionomer (GI) and to investigate variables predictive of their outcome. The clinical performance of the two restorative materials in function was compared using the ratings of the modified United States Public Health Service (USPHS) criteria. A total of 479 cervical restorations were included in the study. Ninety-one already-replaced restorations were reviewed from dental records. The other 388 restorations still in function were evaluated according to the modified USPHS criteria by two investigators. Longevity and prognostic variables were analyzed with the Kaplan-Meier survival analysis and multivariate Cox proportional hazard model. The clinical performances of the two materials were evaluated according to the ratings of the USPHS criteria and compared using the Pearson chi-square test and Fisher exact test. The longevity was not significantly different between RC and GI (median survival time, 10.4 ± 0.7 and 11.5 ± 1.1 years, respectively). The main reasons for failure were loss of retention (82.2%) and secondary caries (17.8%). The longevity of cervical restoration was significantly influenced by tooth group and operator group (Wald test, p<0.05), while material, gender, presence or absence of systemic diseases, arch, and reason for treatment did not affect the longevity. Contrary to the longevity, the clinical performance of RC was superior to GI in the criteria of retention, marginal discoloration, and marginal adaptation, but similar in secondary caries, wear, and postoperative sensitivity.
Asunto(s)
Materiales Dentales/química , Restauración Dental Permanente/métodos , Cuello del Diente/patología , Adulto , Anciano , Anciano de 80 o más Años , Color , Resinas Compuestas/química , Recubrimiento Dental Adhesivo , Caries Dental/etiología , Adaptación Marginal Dental , Fracaso de la Restauración Dental , Alisadura de la Restauración Dental , Femenino , Estudios de Seguimiento , Cementos de Ionómero Vítreo/química , Humanos , Masculino , Persona de Mediana Edad , Pronóstico , Recurrencia , Estudios Retrospectivos , Propiedades de Superficie , Análisis de Supervivencia , Resultado del Tratamiento , Adulto JovenRESUMEN
A 15-year-old teenager with Type 1 Neurofibromatosis presented with grade 4 spondylolisthesis over T12/L1 junction resulting paraparesis (Frankel D). Radiograph showed a Cobb angle of 88 degrees. Computed tomography scan showed dysplastic vertebral bodies, pedicles and facet joints of T11, T12 and L1 vertebra with complete T12/L1 facets dislocation. Magnetic resonance imaging confirmed presence of spinal cord compression. He underwent posterior instrumentation and posterolateral fusion (T8 to L4) using hybrid instrumentation. Extensive corticotomy of the posterior elements was followed by the use of large amount of bone graft. Post operatively, his neurology improved markedly back to normal. Radiographs showed a good correction of the deformity. He was immobilized in a thoracolumbar orthosis for six months. A solid posterior fusion was achieved at six months follow up. At 36-month follow up, he remained asymptomatic. This case report illustrates a successful treatment of a grade 4 thoracolumbar spondylolisthesis secondary to neurofibromatosis with posterior spinal fusion alone.
Asunto(s)
Espondilolistesis , Vértebras Torácicas , Humanos , Vértebras Lumbares , Neurofibromatosis , Fusión Vertebral , Resultado del TratamientoRESUMEN
In this paper, the viability of using Fuzzy-Rule-Based Regression Modeling (FRM) algorithm for tool performance and degradation detection is investigated. The FRM is developed based on a multi-layered fuzzy-rule-based hybrid system with Multiple Regression Models (MRM) embedded into a fuzzy logic inference engine that employs Self Organizing Maps (SOM) for clustering. The FRM converts a complex nonlinear problem to a simplified linear format in order to further increase the accuracy in prediction and rate of convergence. The efficacy of the proposed FRM is tested through a case study - namely to predict the remaining useful life of a ball nose milling cutter during a dry machining process of hardened tool steel with a hardness of 52-54 HRc. A comparative study is further made between four predictive models using the same set of experimental data. It is shown that the FRM is superior as compared with conventional MRM, Back Propagation Neural Networks (BPNN) and Radial Basis Function Networks (RBFN) in terms of prediction accuracy and learning speed.
Asunto(s)
Inteligencia Artificial , Lógica Difusa , Redes Neurales de la ComputaciónRESUMEN
In this paper, to improve the poor wettability between the Carbon nanotubes (CNTs) and metal matrix, the mechanical alloying (MA) technique by the ball milling method was employed. Also, the CNTs were pre-coated to improve the agglomeration of the CNTs with copper powder. The main aim of this work is the fabrication of Cu-CNT nanocomposite powder using the MA by ball milling. The as-received dendritic copper powders change their shape sequentially to flaky, disk-typed particles and finally, to globular type particles. Also, the tendency of globular formation was prominent in the milled Cu-Cu coated MWNTs (multi-walled carbon nanotubes) powder and the grain size of the sintered Cu coated MWNTs specimen decreased more than that of the pure copper specimen. Finally, the homogeneous Cu-CNT nanocomposite intermetallic particles having fine grains was produced by the MA method of ball milling.
RESUMEN
BACKGROUND AND STUDY AIMS: There is a paucity of in vitro methods for evaluating ERCP accessories. We hypothesize that the time taken to perform a simulated single stent or multiple stents placement is different for stenting systems with or without the capability of intraductal ductal release (IDR) of the guide wire. PATIENTS AND METHODS: We conducted an un-blinded in vitro comparison of ERCP accessories using a mechanical simulator during hands-on ERCP practice workshops. A total of 21 U.S. participants and 20 Chinese participants with various level of ERCP experience took part in the different practice workshops. Accessories with and without the capability of intraductal release of guide wire were compared. Total time required for completing a simulated stenting procedure with single or multiple stents and the respective simulated fluoroscopy time were recorded. RESULTS: There was no significant difference in the time taken for placement of a single stent using either stenting systems. Stenting system capable of intraductal release of the guide wire required significantly shorter time to complete placement of three stents. CONCLUSIONS: Using time required to complete a specific task, i. e. biliary stenting, the mechanical simulator permits the performance of different accessories by the same group of operators to be evaluated objectively.
Asunto(s)
Colangiopancreatografia Retrógrada Endoscópica/instrumentación , Modelos Anatómicos , Actitud del Personal de Salud , Colestasis Extrahepática/diagnóstico , Colestasis Extrahepática/terapia , Enfermedades del Conducto Colédoco/diagnóstico , Enfermedades del Conducto Colédoco/terapia , Curriculum , Educación , Diseño de Equipo , Becas , Fluoroscopía/instrumentación , Gastroenterología/educación , Humanos , Técnicas In Vitro , Stents , Encuestas y Cuestionarios , Estudios de Tiempo y MovimientoRESUMEN
Hydrogen peroxide (H(2)O(2)), an oxidizing agent, has been widely used as a disinfectant. Recently, because of its reactive properties, H(2)O(2) has also been used as a tooth bleaching agent in dental care. This is a cause for concern because of adverse biological effects on the soft and hard tissues of the oral environment. To investigate the influence of H(2)O(2) on odontoblasts, the cells producing dentin in the pulp, we assessed cellular viability, generation of reactive oxygen species (ROS), alkaline phosphatase (ALP) activity, and nodule formation of an odontoblastic cell line (MDPC-23) after treatment with H(2)O(2), and compared those with the effects on preosteoblastic MC3T3-E1 cells. Cytotoxic effects of H(2)O(2) began to appear at 0.3 mmol/L in both MDPC-23 and MC3T3-E1 cells. At that concentration, the accumulation of intracellular ROS was confirmed by a fluorescent probe, DCFH-DA. Although more ROS were detected in MDPC-23, the increasing pattern and rate are similar between the two cells. When the cells were treated with H(2)O(2) at concentrations below 0.3 mmol/L, MDPC-23 displayed a significant increase in ALP activity and mineralized bone matrix, while MC3T3-E1 cells showed adverse effects of H(2)O(2). It is known that ROS are generally harmful by-products of aerobic life and represent the primary cause of aging and numerous diseases. These data, however, suggest that ROS can induce in vitro cell differentiation, and that they play a more complex role in cell physiology than simply causing oxidative damage.
Asunto(s)
Fosfatasa Alcalina/metabolismo , Matriz Ósea/efectos de los fármacos , Calcificación Fisiológica/efectos de los fármacos , Peróxido de Hidrógeno/farmacología , Odontoblastos/efectos de los fármacos , Osteoblastos/efectos de los fármacos , Animales , Matriz Ósea/enzimología , Matriz Ósea/metabolismo , Línea Celular , Supervivencia Celular/efectos de los fármacos , Ratones , Odontoblastos/enzimología , Odontoblastos/metabolismo , Osteoblastos/enzimología , Osteoblastos/metabolismo , Estrés Oxidativo/efectos de los fármacos , Especies Reactivas de Oxígeno/metabolismoRESUMEN
The purpose of this study was to evaluate the effects of salicylic-lactic (SL) acid conditioner on the shear bond strength of brackets. Fluoride releasing (Light-bond) and non-fluoride releasing (Enlight) composite adhesives were used after conditioning with 0.22% salicylic + 9% lactic acid or 34% phosphoric acid. Composite adhesives were light cured with either a halogen light curing (HLC) unit for 30-50 s or a plasma arc curing (PAC) unit for 4 s. The shear bond strength was measured with an Instron. Failure modes of debonded brackets were identified based on adhesive remnants on the bracket and tooth. Salicylic-lactic acid conditioning was found to provide adequate shear bond strength. Groups conditioned with SL acid were debonded mainly at the enamel-resin interface and comparatively clean enamel surface after debonding was observed than those conditioned with phosphoric acid. Using confocal laser scanning microscopic examinations, it was found that demineralization patterns between SL acid and phosphoric acid conditioned groups were not different when the same adhesive was used. The SL acid conditioner did not reduce the demineralization. Light-bond adhesive showed less demineralization than Enlight adhesive. The PAC unit can be recommended as an alterative to the HLC unit because it significantly reduces the irradiation time.
Asunto(s)
Esmalte Dental , Ácido Láctico/farmacología , Soportes Ortodóncicos , Resistencia al Corte , Desmineralización Dental/fisiopatología , Grabado Ácido Dental , Diente Premolar , Resinas Compuestas , Recubrimiento Dental Adhesivo/métodos , Humanos , Microscopía Confocal/métodos , Ácidos Fosfóricos/farmacología , Cementos de Resina , Ácido Salicílico/farmacología , Acondicionamiento de Tejidos Dentales/métodosRESUMEN
The objective of this study was to evaluate the difference in the colour and colour change of dental resin composites over commonly used two backgrounds. Colour of five uncured and cured resin composites before and after polishing with 600-, 1000- or 1500-grit SiC paper was measured according to the CIELAB colour scale relative to the illuminant D65 over a white background (WB; reflectance = 91.57%) and a light trap (LT; reflectance = 0.01%) on a reflection spectrophotometer with the SCE geometry. Colour difference (DeltaE*ab) by the background, and by the specimen conditions over each of two backgrounds was calculated. DeltaE*ab values between the same specimen by the background were 2.38-11.60. DeltaE*ab values by the specimen condition were varied by the background, and DeltaE*ab between cured/polished specimens over WB were significantly higher than those over LT (P < 0.05) except a few cases. Background influenced three-colour coordinates of CIE L*, a*, and b* values differently depending on the material and the specimen condition. Background significantly influenced the colour coordinates and colour difference by the specimen conditions. As the light trap can eliminate the influence of variations at the background, measured colour over the light trap can be the colour of material itself. Correlation between the measured colour and varied shades of background should be further studied.
Asunto(s)
Resinas Compuestas , Coloración de Prótesis , Colorimetría , Humanos , EspectrofotometríaRESUMEN
The purpose of this study was to evaluate the polymerization shrinkage of three orthodontic adhesive resins when polymerized with a high-energy plasma arc light (1340 mW cm(-2)) and a conventional halogen light (500 mW cm(-2)), and to correlate the polymerization shrinkage with the degree of conversion. To equalize the total light energy delivered to the adhesive resin, irradiation time was varied between 3 or 6 s for a plasma arc-curing unit, and 8 or 16 s for a halogen light-curing unit. The polymerization shrinkage of adhesive resins during the light-curing process was measured using a computer-controlled mercury dilatometer and the degree of conversion was measured using Fourier transform infrared spectroscopy. A plasma arccuring unit produced significantly lower polymerization shrinkage than a halogen light-curing unit when the equivalent total light energy was irradiated to the orthodontic adhesive resins (P < 0.05). The magnitude of polymerization shrinkage was significantly different depending on the kind of adhesive resins (P < 0.05), but there was no significant correlation between the filler fraction and the polymerization shrinkage (r2 = 0.039). There was strong correlation (r2 = 0.787) between the polymerization shrinkage and the degree of conversion with a halogen light-curing unit, but poor correlation (r2 = 0.377) was observed with a plasma arc-curing unit.
Asunto(s)
Recubrimiento Dental Adhesivo , Cementos Dentales , Ortodoncia , Cementos de Resina , LuzRESUMEN
The objectives of this study were to determine the influence of thermocycling on the changes of elastic modulus (EM) and colour, and to evaluate cytotoxicity after repeated elution of short-term-use soft liners. Three short-term-use soft liners [soft acrylic-based Coe Comfort (CCM), Coe Soft (CST) and Soft Liner (SFL)], and long-term-use silicone-based Tokuso Soft Liner (TSL) acting as a control were studied. EM was measured at baseline and after thermocycling at 5-55 degrees C for 500, 1000, 1500 and 2000 cycles. For the colour measurement, specimens in discs 20 mm in diameter and 1 mm in thickness were prepared, attached to a denture base resin plate, and then thermocycled as above. Colour change (Delta E*) was measured according to the Commission Internationale de l'Eclairage (CIE) L*, a*, and b* scale on a spectrophotometer. For the cytotoxicity evaluation, specimens were eluted for 24 h in culture media repeatedly up to four times, and MTT assay (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) was performed. EM of CCM and CST increased up to 1500 and 1000 cycles of thermocycling respectively. EM of SFL gradually increased up to 2000 cycles, and that of TSL increased after 500 cycles and did not change after then. Delta E* of soft liners after 2000 cycles except CCM were 3.68-8.65. EM increased up to 1000-1500 cycles, and perceivable colour change was observed after 2000 cycles in most materials. Therefore, short-term-use soft liners should be used within a limited time, although the cytotoxicity decreased after repeated elution.
Asunto(s)
Resinas Acrílicas/química , Alineadores Dentales , Resinas Acrílicas/toxicidad , Muerte Celular/efectos de los fármacos , Fenómenos Químicos , Química Física , Color , Elasticidad , Calor , Humanos , Ensayo de Materiales/métodos , Estrés Mecánico , Temperatura , TermodinámicaRESUMEN
This study was performed to increase the treatment efficiency and to reduce operation and maintenance costs of the existing nightsoil treatment plant. The existing nightsoil plant was not established by the nitrogen removal process, and was operated ineffectively with deterioration of treatment efficiency rate, and according to the demand of many operators, the expenses of operation and maintenance have become excessive. Modified plant has been changed through two steps. The first step, liquid decayed tank using closed oxidation ditch is operated to increase retention time only for nitrification. The second step, modified liquid decayed tank including anoxic tank is operated, it has an excellent nitrogen removal rate. In first step, when HRT was increased from 10 days to 13 days in liquid decayed tank including aeration tank using closed oxidation ditch, TN concentration of effluent appeared below 51 mg/L less than discharge limit, 60 mg/L. In second step, when anoxic tank and oxic tank were installed, HRT has been increased to 13 days and 26 days, respectively. Then average TN concentration of effluent was detected less than 13 mg/L for over one year. The simple process modified the existing two processes resulted in the reduction of costs for operation and maintenance in the personnel, chemical, and filter change sphere.
Asunto(s)
Nitrógeno/aislamiento & purificación , Eliminación de Residuos/métodos , Control de Costos , Arquitectura y Construcción de Instituciones de Salud , Heces , Humanos , Corea (Geográfico) , Nitrógeno/análisis , Oxidación-Reducción , Eliminación de Residuos/economía , Aguas del Alcantarillado/químicaRESUMEN
The purpose of this study was to evaluate the effect of the various light curing units (plasma arc, halogen and light-emitting diodes) and irradiation methods (one-step, two-step and pulse) using different light energy densities on the leachability of unreacted monomers (Bis-GMA and UDMA) and the surface hardness of a composite resin (Z250, 3M). Leachability of the specimens immersed for 7 days in ethanol was analysed by HPLC. Vicker's hardness number (VHN) was measured immediately after curing (IC) and after immersion in ethanol for 7 days. Various irradiation methods with three curing units resulted in differences in the amount of leached monomers and VHN of IC when light energy density was lower than 17.0 J cm(-2) (P = 0.05). However, regardless of curing units and irradiation methods, these results were not different when the time or light energy density increased. When similar light energy density was irradiated (15.6-17.7 J cm(-2)), the efficiency of irradiation methods was different by the following order: one-step > or = two-step > pulse. These results suggest that the amount of leached monomers and VHN were influenced by forming polymer structure in activation and initiation stages of polymerization process with different light source energies and curing times.
Asunto(s)
Resinas Compuestas , Restauración Dental Permanente/métodos , Luz , Cementos de Resina , Bisfenol A Glicidil Metacrilato/efectos de la radiación , Resinas Compuestas/efectos de la radiación , Adaptación Marginal Dental , Análisis del Estrés Dental/métodos , Recubrimientos Dentinarios/efectos de la radiación , Dureza/efectos de la radiación , Pruebas de Dureza , Humanos , Metacrilatos/efectos de la radiación , Poliuretanos/efectos de la radiación , Cementos de Resina/efectos de la radiación , Propiedades de SuperficieRESUMEN
The objective of this study was to compare the mechanical properties of calcium phosphate cements (CPC) for possible dental applications with varied liquid and powder compositions under the same testing condition. Cements studied in this experiment were divided into two groups of CPC not containing polymer and polymeric CPC (PCPC). Cement powder was formed by combining equimolar amounts of dicalcium phosphate anhydrous and tetracalcium phosphate, or acrylic resin polymer powder mixture. The CPC specimens for the compressive strength (CS) and diametral tensile strength (DTS) measurements were prepared by mixing powder and liquid for 30 s with a powder/liquid ratio of 3:1, and subsequently packing the paste into a brass mould. The specimens were kept at 37 degrees C and 100% relative humidity for 24 h before measurements were conducted on a Universal Testing Machine with a cross-head speed of 1 mm min-1. The CS of CPC was 0.14-10.29 MPa and that of PCPC was 0.26-117.58 MPa. The DTS of CPC was 0.10-4.56 MPa and that of PCPC was 0.07-22.54 MPa. The CS and DTS were very diverse depending on the composition of powder and liquid. Some compositions showed higher values than commercial liners. Thus compositions of 2% carboxymethyl cellulose + 35% citric acid in phosphate buffered saline (PBS), 20% gelatin in PBS, 2% sodium alginate in PBS, 20-40% aqueous acrylic-maleic copolymer solution, and some of the HPMC and PMVE-Ma solutions exhibited promising formulae for dentine regenerating materials. Acrylic resin-PCPC group showed generally higher CS and DTS values. Based on this study, further studies on the reaction with odontoblast and resultant dentine regeneration should be performed using promising compositions.
Asunto(s)
Fosfatos de Calcio/química , Cementos Dentales/química , Resinas Acrílicas , Materiales Biocompatibles , Fosfatos de Calcio/análisis , Fuerza Compresiva , Cementos Dentales/análisis , Materiales Dentales/análisis , Materiales Dentales/química , Humanos , Ensayo de Materiales/métodos , Polvos , Resistencia a la TracciónRESUMEN
The purpose of this study was to determine the effectiveness of polymerization in the newly introduced blue light emitting diode (LED) (Experimental, SNU, Korea), and plasma arc curing (PAC) (Apollo 95E, Elite, DMD, USA) compared with conventional halogen lamp (Spectrum 800, Dentsply, USA). Various irradiation time with fixed intensity of light-curing units (LCUs) were irradiated to produce the same total light energy. The degree of double bond conversion (DC) of three resin composite (shade A3) was measured with a Fourier-transform infrared (FT-IR) spectrophotometer at various depths from the surface. Immediately after exposure to light, 100 microm thickness of resin composite was sectioned at the 1, 2, 3 and 4 mm from the top surface. The infrared spectrum of uncured resin and each wafer specimen were then obtained. The results were as follows: DC was significantly influenced by three variables of material, depth from the surface, and light source and energy level (P < 0.01). When the same light energy was irradiated, DC by plasma arc and LED was not significantly different from the halogen lamp (P > 0.05). When light energy was increased twice, no significant difference in DC was observed up to 2 mm from the surface (P > 0.05), but DC increased significantly from 3 mm (P < 0.05).
Asunto(s)
Resinas Compuestas/química , Incrustaciones , Luz , Resinas Compuestas/efectos de la radiación , Polímeros , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
The objectives of this paper were to evaluate the effects of colour measuring modes [specular component excluded (SCE) versus specular component included (SCI)] and the standard light source (C, A or D65) on the colour of shade guides. After the labial part of shade tabs of two shade guides (Vita and Chromascop) was polished flat up to no. 2400 silicone carbide paper, the colour was measured according to the International Commission on Illumination (CIE)L*a*b* colour scale on a spectrophotometer. In both shade guides, all the average CIE L* values of each shade series, and most of CIE b* values were different depending on the measuring mode (P < 0.01). However, there was no difference in CIE a* values depending on the measuring mode. Colour difference (deltaE*) between the values measured with SCE mode and with SCI mode was 3.21-6.50 in Vita shade guide, 3.22-5.47 in Chromascop shade guide. DeltaE* caused by the difference in light source was very small in Vita shade guide regardless of the measuring mode. In the Vita shade guide, the shade series (A-D) was negatively correlated with CIE L* and CIE a* values measured with SCE mode. In the Chromascop shade guide, the shade series (100-500) was negatively correlated with CIE L* value measured with SCI mode.
Asunto(s)
Coronas , Iluminación , Coloración de Prótesis , Colorimetría , Ensayo de Materiales , Espectrofotometría/métodosRESUMEN
OBJECTIVES: The goal of this study was to assess the reduction of polymerization contraction stress of composites during a two-step light-activation process and to relate this reduction to the process of polymerization shrinkage and specimen thickness. METHODS: Three test procedures were performed to compare two-step light-activation with delay with one-step continuous irradiation of composites: polymerization contraction stress using a closed-loop servohydraulic testing instrument, polymerization shrinkage by a mercury dilatometer, and degree of conversion by FTIR. For the one-step continuous curing method, the samples were light-activated for 60s at 330 mW/cm(2). For the two-step curing method, a 5s light exposure at 60 mW/cm(2) was followed by 2 min without light exposure, and then a second light exposure for 60s at 330 mW/cm(2). The same light parameters were used for measurements of stress, shrinkage, and degree of conversion. Three composites, Heliomolar, Herculite and Z100 were evaluated. The contraction stress experiments were repeated with varying thickness for Herculite using the one-step and two different two-step techniques. RESULTS: Polymerization contraction stress 10 min after light-activation was significantly reduced (P<0.05) by the two-step method: 29.7% for Heliomolar, 26.5% for Herculite, and 19.0% for Z100. Total volumetric shrinkage and degree of conversion were not significantly different for composites cured by the two different techniques. Increasing the thickness of the composite sample reduced the measured contraction stress, especially for one of the two-step curing methods. SIGNIFICANCE: A combination of low initial energy density followed by a lag period before a final high-intensity light irradiation provides a reduction of polymerization contraction stresses in dental composites. The stress reductions cannot be attributed to reductions in degree of conversion or unrestrained volumetric shrinkage.
Asunto(s)
Resinas Compuestas/química , Luz , Dióxido de Silicio , Circonio , Resinas Acrílicas/química , Análisis de Varianza , Resinas Compuestas/efectos de la radiación , Humanos , Ensayo de Materiales/instrumentación , Polímeros/química , Polímeros/efectos de la radiación , Poliuretanos/química , Cementos de Resina/química , Espectroscopía Infrarroja por Transformada de Fourier , Estadística como Asunto , Estrés Mecánico , Propiedades de Superficie , Factores de Tiempo , TransductoresRESUMEN
High rate algal ponds (HRAP) with a filamentous algae matrix (FAM) as the predominant species, were operated to evaluate the characteristics of FAM and the basic design parameters for treating polluted rural stream water. The porous and gelatinous FAM was formed like a sponge, which functions to prevent excessive loss of the algae in the effluent and can easily be retrieved from the ponds. The organic fraction of harvested FAM was about 88%, which is suitable for use as fertilizer. The HRAP system using FAM was found to be an effective nutrient removal process not requiring any artificial carbon sources for nitrification. At HRT 4 days, the T-N and T-P removal efficiencies were 85.9% and 65.8%, respectively. When the pH and water temperature were maintained above 9 and 15 degrees C, HRT required for achieving a 70% T-N removal efficiency could be reduced by about 3 days. The oxygen production rate by FAM was calculated as 1.45 mgO2/L/m2. The design surface area of HRAP needed per rural inhabitant was about 2.72 m2.
Asunto(s)
Eucariontes , Fertilizantes , Purificación del Agua/métodos , Abastecimiento de Agua , Agricultura , Arquitectura y Construcción de Instituciones de Salud , Concentración de Iones de Hidrógeno , Corea (Geográfico) , Nitrógeno/aislamiento & purificación , Fósforo/aislamiento & purificación , Porosidad , TemperaturaRESUMEN
The objective of the described research was the evaluation of the effects of the differences in the color-measuring geometry (SCE, SCI) and the standard illuminant on the color and color change after polymerization and thermocycling of resin composites. White, translucent, and conventional shades of two brands of resin composites were measured before and after polymerization and after thermocycling according to the CIE L*a*b* color scale on a reflection spectrophotometer with SCE and SCI geometry under the standard illuminants A, D65, and C. Under both SCE and SCI modes, the color differences (DeltaE*) of specimens between the values measured under illuminants A and D65 or A and C were larger than those between D65 and C in unpolymerized, polymerized, and thermocycled conditions. With SCE geometry, DeltaE* after polymerization of the white shade group was 8.7-9.8 under D65, and was higher than the conventional shade group (p < 0.05) in both materials. With SCE geometry, DeltaE* between polymerized and thermocycled white, translucent shade was 4.4-7.1 under D65. With SCI geometry, the results were in general agreement with those of SCE mode. After polymerization, DeltaE* measured under illuminant A was generally higher than that under D65 or C (p < 0.01). After thermocycling, the color change was different depending on the color-measuring geometry and standard illuminant.