Role of light emitting diode (LED) wavelengths on increase of protein productivity and free amino acid profile of Spirulina sp. cultures.

LEDs have specific wavelengths that can positively influence the production of microalga biomass and biomolecules of interest. Filling the gaps in the literature, this study evaluated the effect of different LED wavelengths and photoperiods on protein productivities and free amino acid (FAA) profile of Spirulina sp. LEB 18 cultures. The best protein productivity results were obtained in red and green LED cultures using integral and partial photoperiods, respectively. In these experiments, protein productivities increased 2 and 1.6 times, respectively, compared to the control culture using fluorescent light. Green LEDs in partial photoperiod provided also the highest concentrations of essential and non-essential FAA, about 1.8 and 2.3 times higher, respectively, than control cultures. LEDs showed to be a promising sustainable light source for increasing protein productivity and FAA concentration in Spirulina sp. LEB 18 cultures.

Brackish Groundwater from Brazilian Backlands in Spirulina Cultures: Potential of Carbohydrate and Polyunsaturated Fatty Acid Production.

The composition of brackish groundwater from Brazilian backlands contains important elements necessary for metabolism in microalgae. This study evaluated the use of 100% brackish groundwater with different amounts of Zarrouk nutrients for Spirulina sp. LEB 18 cultivation. The growth parameters and biomass composition, including the concentrations of proteins, carbohydrates, ash, lipids, and fatty acids, were evaluated. The best growth parameter results were obtained in the assay using 100% brackish groundwater and only 25% of Zarrouk nutrients, which were equal to those obtained for the control culture. The concentrations of carbohydrates and polyunsaturated fatty acids were increased by as much as 4- and 3.3-fold, respectively, when brackish groundwater was used in the cultures. The lipid profile demonstrated that the biomass had the potential for use in biodiesel production. The use of brackish groundwater is a sustainable, economical way to obtain high-quality biomass for different applications during Spirulina sp. LEB 18 cultivation.

Biological CO2 mitigation by microalgae: technological trends, future prospects and challenges.

The increase in the CO2 concentration in the Earth's atmosphere has been a topic of worldwide concern since anthropogenic emissions of greenhouse gases began increasing considerably during the industrial period. The effects of these mass emissions are probably the main cause of global warming, which has been observed over recent decades. Among the various techniques of CO2 capture, microalgal biofixation by photosynthesis is considered a promising technology due to the efficiency of these microorganisms in converting this gas into organic compounds through its use as a nutrient in the culture medium. Over the years, several research centers have developed studies on this subject, which have focused on mainly the development of bioreactors, the growth conditions that increase the efficiency of the process and the production of biomass with applicability in several areas. The biological mitigation of CO2 by microalgae has many advantages, including reductions in the concentration of an industrially sourced greenhouse gas and the energy or food obtained from the produced photosynthetic biomass. This versatility allows for the cultivation of economically useful biomass while reducing the environmental impacts of industrial facilities. In this context, this mini-review aims to discuss new technologies and strategies along with the main challenges and future prospects in the field and the ecological and economic impacts of CO2 biofixation by microalgae.

Cultivation of different microalgae with pentose as carbon source and the effects on the carbohydrate content.

In the search for alternative carbon sources for microalgae cultivation, pentoses can be considered interesting alternatives since the most abundant global source of renewable biomass is lignocellulosic waste, which contains significant quantities of pentoses. However, the use of pentoses (C5) in the cultivation of microalgae is still not widely studied and only recently the first metabolic pathway for pentose absorption in microalgae was proposed. So, the objective of this work was to evaluate if the use of pentoses affects the growth and carbohydrates content of Chlorella minutissima, Chlorella vulgaris, Chlorella homosphaera and Dunaliella salina. The kinetic parameters, carbohydrate and protein content and the theoretical potential for ethanol production were estimated for all strains. The highest cellular concentrations (1.25 g L-1) were obtained for D. salina with 5% of pentoses. The addition of pentoses leads to high levels of carbohydrates for C. minutissima (58.6%) cultured with 5% of pentoses, and from this biomass, it is possible to determine a theoretical production of ethanol of 38 mL per 100 g of biomass. The pentoses affect the growth and the biomass composition of the studied strains, generating biomass with potential use for bioethanol production.

Outdoor pilot-scale cultivation of Spirulina sp. LEB-18 in different geographic locations for evaluating its growth and chemical composition.

This study evaluated whether outdoor cultivation of Spirulina sp. in different geographical locations affected its growth and biomass quality, with respect to the chemical composition, volatile compound and heavy metal content, and thermal stability. The positive effect of solar radiation and temperature on biomass productivity in Spirulina sp. cultivated in the northeast was directly related to its improved nutritional characteristics, which occurred with an increase in protein, phycocyanin, and polyunsaturated fatty acid (mainly γ-linolenic) content. The biomass produced in Northeast and South Brazil showed high thermal stability and had volatile compounds that could be used as biomarkers of Spirulina, and their parameters were within the limits of internationally recognized standards for food additives; hence, they have been considered safe foods. However, the growth of crops in south Brazil occurred at lower rates due to low temperatures and luminous intensities, indicative of the robustness of microalgae in relation to these parameters.

Polyhydroxybutyrate (PHB) Synthesis by Spirulina sp. LEB 18 Using Biopolymer Extraction Waste.

The reuse of waste as well as the production of biodegradable compounds has for years been the object of studies and of global interest as a way to reduce the environmental impact generated by unsustainable exploratory processes. The conversion of linear processes into cyclical processes has environmental and economic advantages, reducing waste deposition and reducing costs. The objective of this work was to use biopolymer extraction waste in the cultivation of Spirulina sp. LEB 18, for the cyclic process of polyhydroxybutyrate (PHB) synthesis. Concentrations of 10, 15, 20, 25, and 30% (v/v) of biopolymer extraction waste were tested. For comparison, two assays were used without addition of waste, Zarrouk (SZ) and modified Zarrouk (ZM), with reduction of nitrogen. The assays were carried out in triplicate and evaluated for the production of microalgal biomass and PHB. The tests with addition of waste presented a biomass production statistically equal to ZM (0.79 g L-1) (p < 0.1). The production of PHB in the assay containing 25% of waste was higher when compared to the other cultivations, obtaining 10.6% (w/w) of biopolymer. From the results obtained, it is affirmed that the use of PHB extraction waste in the microalgal cultivation, aiming at the synthesis of biopolymers, can occur in a cyclic process, reducing process costs and the deposition of waste, thus favoring the preservation of the environment.

Ultrafine fibers of zein and anthocyanins as natural pH indicator.

BACKGROUND: pH-sensitive indicator membranes, which are useful for pharmaceutical, food, and packaging applications, can be formed by encapsulating halochromic compounds within various solid supports. Accordingly, electrospinning is a versatile technique for the development of these indicators, by entrapping pH dyes within ultrafine polymer fibers. RESULTS: The ultrafine zein fibers, containing 5% (w/v) anthocyanins, had an average diameter of 510 nm. The pH-sensitive membrane exhibited color changes from pink to green when exposed to acidic and alkaline buffers, respectively. The contact angle was negligible after 10 and 2 s for neat and 5% anthocyanin-loaded zein membranes, respectively. CONCLUSION: The pH membranes exhibited color changes in a board pH range, which can potentially be used in various active packaging applications. © 2017 Society of Chemical Industry.

CO2 Biofixation by the Cyanobacterium Spirulina sp. LEB 18 and the Green Alga Chlorella fusca LEB 111 Grown Using Gas Effluents and Solid Residues of Thermoelectric Origin.

The concentration of carbon dioxide (CO2) in the atmosphere has increased from 280 to 400 ppm in the last 10 years, and the coal-fired power plants are responsible for approximately 22 % of these emissions. The burning of fossil fuel also produces a great amount of solid waste that causes serious industrial and environmental problems. The biological processes become interesting alternative in combating pollution and developing new products. The objective of this study was to evaluate the CO2 biofixation potential of microalgae that were grown using gaseous effluents and solid residues of thermoelectric origin. The microalgae Chlorella fusca LEB 111 presented higher rate of CO2 biofixation (42.8 %) (p < 0.01) than did Spirulina sp. LEB 18. The values for the CO2 biofixation rates and the kinetic parameters of Spirulina and Chlorella cells grown using combustion gas did not differ significantly from those of cells grown using CO2 and a carbon source in the culture media. These microalgae could be grown using ash derived from coal combustion, using the minerals present in this residue as the source of the essential metals required for their growth and the CO2 derived from the combustion gas as their carbon source.

Biologically Active Metabolites Synthesized by Microalgae.

Microalgae are microorganisms that have different morphological, physiological, and genetic traits that confer the ability to produce different biologically active metabolites. Microalgal biotechnology has become a subject of study for various fields, due to the varied bioproducts that can be obtained from these microorganisms. When microalgal cultivation processes are better understood, microalgae can become an environmentally friendly and economically viable source of compounds of interest, because production can be optimized in a controlled culture. The bioactive compounds derived from microalgae have anti-inflammatory, antimicrobial, and antioxidant activities, among others. Furthermore, these microorganisms have the ability to promote health and reduce the risk of the development of degenerative diseases. In this context, the aim of this review is to discuss bioactive metabolites produced by microalgae for possible applications in the life sciences.

Biofunctionalized nanofibers using Arthrospira (Spirulina) biomass and biopolymer.

Electrospun nanofibers composed of polymers have been extensively researched because of their scientific and technical applications. Commercially available polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-valerate (PHB-HV) copolymers are good choices for such nanofibers. We used a highly integrated method, by adjusting the properties of the spinning solutions, where the cyanophyte Arthrospira (formally Spirulina) was the single source for nanofiber biofunctionalization. We investigated nanofibers using PHB extracted from Spirulina and the bacteria Cupriavidus necator and compared the nanofibers to those made from commercially available PHB and PHB-HV. Our study assessed nanofiber formation and their selected thermal, mechanical, and optical properties. We found that nanofibers produced from Spirulina PHB and biofunctionalized with Spirulina biomass exhibited properties which were equal to or better than nanofibers made with commercially available PHB or PHB-HV. Our methodology is highly promising for nanofiber production and biofunctionalization and can be used in many industrial and life science applications.

Biological effects of Spirulina (Arthrospira) biopolymers and biomass in the development of nanostructured scaffolds.

Spirulina is produced from pure cultures of the photosynthetic prokaryotic cyanobacteria Arthrospira. For many years research centers throughout the world have studied its application in various scientific fields, especially in foods and medicine. The biomass produced from Spirulina cultivation contains a variety of biocompounds, including biopeptides, biopolymers, carbohydrates, essential fatty acids, minerals, oligoelements, and sterols. Some of these compounds are bioactive and have anti-inflammatory, antibacterial, antioxidant, and antifungal properties. These compounds can be used in tissue engineering, the interdisciplinary field that combines techniques from cell science, engineering, and materials science and which has grown in importance over the past few decades. Spirulina biomass can be used to produce polyhydroxyalkanoates (PHAs), biopolymers that can substitute synthetic polymers in the construction of engineered extracellular matrices (scaffolds) for use in tissue cultures or bioactive molecule construction. This review describes the development of nanostructured scaffolds based on biopolymers extracted from microalgae and biomass from Spirulina production. These scaffolds have the potential to encourage cell growth while reducing the risk of organ or tissue rejection.

Effect of the carbon concentration, blend concentration, and renewal rate in the growth kinetic of Chlorella sp.

The microalgae cultivation can be used as alternative sources of food, in agriculture, residual water treatment, and biofuels production. Semicontinuous cultivation is little studied but is more cost-effective than the discontinuous (batch) cultivation. In the semicontinuous cultivation, the microalga is maintained in better concentration of nutrients and the photoinhibition by excessive cell is reduced. Thus, biomass productivity and biocompounds of interest, such as lipid productivity, may be higher than in batch cultivation. The objective of this study was to examine the influence of blend concentration, medium renewal rate, and concentration of sodium bicarbonate on the growth of Chlorella sp. during semicontinuous cultivation. The cultivation was carried out in Raceway type bioreactors of 6 L, for 40 d at 30°C, 41.6 µmol m(-2) s(-1), and a 12 h light/dark photoperiod. Maximum specific growth rate (0.149 d(-1)) and generating biomass (2.89 g L(-1)) were obtained when the blend concentration was 0.80 g L(-1), the medium renewal rate was 40%, and NaHCO3 was 1.60 g L(-1). The average productivity (0.091 g L(-1) d(-1)) was achieved with 0.8 g L(-1) of blend concentration and NaHCO3 concentration of 1.6 g L(-1), independent of the medium renewal rate.

The role of biochemical engineering in the production of biofuels from microalgae.

Environmental changes that have occurred due to the use of fossil fuels have driven the search for alternative sources that have a lower environmental impact. First-generation biofuels were derived from crops such as sugar cane, corn and soybean, which contribute to water scarcity and deforestation. Second-generation biofuels originated from lignocellulose agriculture and forest residues, however these needed large areas of land that could be used for food production. Based on technology projections, the third generation of biofuels will be derived from microalgae. Microalgae are considered to be an alternative energy source without the drawbacks of the first- and second-generation biofuels. Depending upon the growing conditions, microalgae can produce biocompounds that are easily converted into biofuels. The biofuels from microalgae are an alternative that can keep the development of human activity in harmony with the environment. This study aimed to present the main biofuels that can be derived from microalgae.

Preparation of nanofibers containing the microalga Spirulina (Arthrospira).

Spirulina is a microalga which offers biological functions highly favorable for tissue engineering. Highly porous scaffolds can be produced by electrospinning containing biomass of Spirulina. The goal of this contribution was therefore to establish spinning conditions allowing to produce well defined nanofibers with diameters down to about 100 nm and to produce nanofibers with various concentration of the biomass for subsequent studies in tissue engineering applications. The experimental results reveal that the blend system PEO/biomass is behaved surprisingly well in electrospinning. Very thin bead-free nanofibers with diameters of about 110 nm can be produced for different biomass contents of up to 67 wt.% of the nanofibers and for PEO concentrations in the spinning solution well below 4 wt.%. These results suggest to us the use of the biomass containing nanofibers as extracellular matrices for stem cell culture and future treatment of spinal chord injury.

Isolation and characterization of a new Arthrospira strain.

A filamentous microorganism, morphologically similar to the cyanobacterium Arthrospira, was isolated from Mangueira Lagoon in Brazil, from which Arthrospira has not previously been isolated. Random amplified polymorphic DNA (RAPD) comparison with the standard Arthrospira platensis strains LEB 52 and Paracas indicated that the organism isolated was an Arthrospira isolate, which we denominated strain LEB 18. The RAPD analysis showed conserved sequences which indicated that the three strains belonged to the same genus, and were all Arthrospira species, but there were sufficient differences between them suggesting that they were separate strains. The strain LEB 18 was cultivated in undiluted Zarrouk medium and in 60% and 20% (v/v) Zarrouk medium diluted with sterilized Mangueira Lagoon water (MLW) using illuminance rates of 32.5, 45.5 and 58.5 micromol m(-2) s(-1) according to a complete 32 factorial design with a triplicate central point. The strains LEB 52 and Paracas were cultived in the conditions central point. Our new isolate produced the highest specific growth rate (Umax = 0.22 d(-1)) in 60% Zarrouk medium diluted with MLW and illuminated with 58.5 micromol m(-2) s(-1) and the highest protein content (86.0% w/w).

Carbon dioxide fixation by Chlorella kessleri, C. vulgaris, Scenedesmus obliquus and Spirulina sp. cultivated in flasks and vertical tubular photobioreactors.

CO(2) at different concentrations were added to cultures of the eukaryotic microalgae, Chlorella kessleri, C. vulgaris and Scenedesmus obliquus, and the prokaryotic cyanobacterium, Spirulina sp., growing in flasks and in a photobioreactor. In each case, the best kinetics and carbon fixation rate were with a vertical tubular photobioreactor. Overall, Spirulina sp. had the highest rates. Spirulina sp., Sc. obliquus and C. vulgaris could grow with up to 18% CO(2).

Biofixation of carbon dioxide by Spirulina sp. and Scenedesmus obliquus cultivated in a three-stage serial tubular photobioreactor.

The increase in the concentration of atmospheric carbon dioxide is considered to be one of the main causes of global warming. As estimated by the Intergovernmental Panel on Climate Change (IPCC) criteria, about 10-15% of the gases emitted from the combustion coal being in the form of carbon dioxide. Microalgae and cyanobacteria can contribute to the reduction of atmospheric carbon dioxide by using this gas as carbon source. We cultivated the Scenedesmus obliquus and Spirulina sp. at 30 degrees C in a temperature-controlled three-stage serial tubular photobioreactor and determined the resistance of these organisms to limitation and excess of carbon dioxide and the capacity of the system to fix this greenhouse gas. After 5 days of cultivation under conditions of carbon limitation both organisms showed cell death. Spirulina sp. presenting better results for all parameters than S. obliquus. For Spirulina sp. the maximum specific growth rate and maximum productivity was 0.44 d(-1), 0.22 g L(-1)d(-1), both with 6% (v/v) carbon dioxide and maximum cellular concentration was 3.50 g L(-1) with 12% (v/v) carbon dioxide. Maximum daily carbon dioxide biofixation was 53.29% for 6% (v/v) carbon dioxide and 45.61% for 12% carbon dioxide to Spirulina sp. corresponding values for S. obliquus being 28.08% for 6% (v/v) carbon dioxide and 13.56% for 12% (v/v) carbon dioxide. The highest mean carbon dioxide fixation rates value was 37.9% to Spirulina sp. in the 6% carbon dioxide runs.

Simultaneous cultivation of Spirulina platensis and the toxigenic cyanobacteria Microcystis aeruginosa.

Mangueira Lagoon, located in the extreme south of Brazil, has water with physicochemical characteristics such as alkaline pH and carbonate levels propitious for the growth of the cyanobacterium Spirulina platensis. Previously published studies have shown that Mangueira Lagoon water supplemented with small quantities of carbon and nitrogen is suitable for S. platensis cultivation and can significantly reduce production costs. We studied mixed cultures of Spirulina platensis and the toxic cyanobacterium Microcystis aeruginosa using a 2(3) factorial design in which the three factors were the initial biomass concentration of S. platensis and M. aeruginosa and the type of culture medium (100% Zarrouk's medium or 80% Mangueira Lagoon water plus 20% Zarrouk's medium). The highest S. platensis maximum specific growth rate (mu(max)) occurred in the culture with the highest M. aeruginosa biomass concentration and when undiluted culture medium was used (micro(max) = 0.283 d(-1)). The highest M. aeruginosa specific death rate (k) was obtained in the presence of S. platensis (k = 0.555 d(-1)) and was independent of the initial M. aeruginosa biomass concentration and culture medium, demonstrating that S. platensis cultures are not susceptible to contamination by M. aeruginosa. The culture medium had no significant influence (p > 0.05) on S. platensis micro(max) values, indicating that production costs could be reduced by using a medium consisting of 80% Mangueira Lagoon water plus 20% Zarrouk's medium.