Betalains nanodispersions: Effects on betalains stability and on rheological properties of Greek yogurt.

Red beetroot (Beta vulgaris L.) is a great source of betalains. The main betalains are the betacyanins, responsible for the purple color, and betaxanthins, which present a brownish color. These pigments can present antioxidant activity and are very unstable under certain conditions, such as temperature, extreme ranges of pH, and exposure to light. The aim of this work was to obtain beetroot extract (BE) via ultrasound and transform it into nanoparticles by using polyethylene glycol (PBE) and polyethylene glycol with low molecular weight chitosan (PCBE) as dispersants. The stability of the main betalains in the nanodispersions and the effects of the nanodispersions on the color and rheological properties of commercial Greek yogurt were evaluated. Compared to pristine BE, PCBE nanoparticles presented increased stability for the main betalains in acidic conditions (pH 3.0 and 5.0) of 56% and 22%, respectively. Both PBE and PCBE showed enhanced relative thermal stability compared to pristine BE. Furthermore, PCBE improved commercial Greek yogurt's rheological properties and color parameters. PCBE nanodispersions can be successfully applied as a color additive to commercial Greek yogurt.

Antigenic and physicochemical characterization of Hepatitis B surface protein under extreme temperature and pH conditions

Hepatitis B virus causes acute and chronic infections in millions of people worldwide and, since 1982, a vaccine with 95% effectiveness has been available for immunization. The main component of the recombinant hepatitis B vaccine is the surface antigen protein (HBsAg). In this work, the effect of pH, ionic strength and temperature on the native state of the HBsAg antigen were studied by a combination of biophysical methods that included small angle X-ray scattering, synchrotron radiation circular dichroism, fluorescence and surface plasmon resonance spectroscopies, as well as in vivo and in vitro potency assays. The native conformation, morphology, radius of gyration, and antigenic properties of the HBsAg antigen demonstrate high stability to pH treatment, especially in the pH range employed in all stages of HBsAg vaccine production and storage. The HBsAg protein presents thermal melting point close to 56°C, reaching a more unfolded state after crossing this point, but it only experiences loss of vaccine potency and antigenic properties at 100°C. Interestingly, a 6-month storage period does not affect vaccine stability, and the results are similar when the protein is kept under refrigerated conditions or at room temperature (20°C). At frozen temperatures, large aggregates (>200nm) are formed and possibly cause loss of HBsAg content, but that does not affect the in vivo assay. Furthermore, HBsAg has a well-ordered secondary structure content that is not affected when the protein is formulated with silica SBA-15, targeting the oral delivery of the vaccine. The combined results from all the characterization techniques employed in this study showed the high stability of the antigen at different storage temperature and extreme values of pH. These findings are important for considering the delivery of HBsAg to the immune system via an oral vaccine.

Agroindustrial biomass for xylanase production by Penicillium chrysogenum: purification, biochemical properties and hydrolysis of hemicelluloses

Background: In this work, the xylanase production by Penicillium chrysogenum F-15 strain was investigated using agroindustrial biomass as substrate. The xylanase was purified, characterized and applied in hemicellulose hydrolysis. Results: The highest xylanase production was obtained when cultivation was carried out with sugar cane bagasse as carbon source, at pH 6.0 and 20°C, under static condition for 8 d. The enzyme was purified by a sequence of ion exchange and size exclusion chromatography, presenting final specific activity of 834.2 U·mg·prot-1. T he molecular mass of the purified enzyme estimated by SDS-PAGE was 22.1 kDa. The optimum activity was at pH 6.5 and 45°C. The enzyme was stable at 40°C with half-life of 35 min, and in the pH range from 4.5 to 10.0. The activity was increased in the presence of Mg+2 and Mn+2 and reducing agents such as DTT and ßmercaptoethanol, but it was reduced by Cu+2 and Pb+2 . The xylanase presented Km of 2.3 mM and Vmax of 731.8 U·mg·prot-1 with birchwood xylan as substrate. This xylanase presented differences in its properties when it was compared to the xylanases from other P. chrysogenum strains. Conclusion: The xylanase from P. chrysogenum F-15 showed lower enzymatic activity on commercial xylan than on hemicellulose from agroindustry biomass and its biochemistry characteristics, such as stability at 40°C and pH from 4.0 to 10.0, shows the potential of this enzyme for application in food, feed, pulp and paper industries and for bioethanol production.

Biochemical characterization and low-resolution SAXS structure of an exo-polygalacturonase from Bacillus licheniformis.

Among the structural polymers present in the plant cell wall, pectin is the main component of the middle lamella. This heterogeneous polysaccharide has an α-1,4 galacturonic acid backbone, which can be broken by the enzymatic action of pectinases, such as exo-polygalacturonases, that sequentially cleave pectin from the non-reducing ends, releasing mono or di-galacturonic acid residues. Constant demand for pectinases that better suit industrial requirements has motivated identification and characterization of novel enzymes from diverse sources. Bacillus licheniformis has been used as an important source for bioprospection of several industrial biomolecules, such as surfactants and enzymes, including pectate lyases. Here we cloned, expressed, purified, and biochemically and structurally characterized an exo-polygalacturonase from B. licheniformis (BlExoPG). Its low-resolution molecular envelope was derived from experimental small-angle scattering data (SAXS). Our experimental data revealed that BlExoPG is a monomeric enzyme with optimum pH at 6.5 and optimal temperature of approximately 60°C, at which it has considerable stability over the broad pH range from 5 to 10. After incubation of the enzyme for 30min at pH ranging from 5 to 10, no significant loss of the original enzyme activity was observed. Furthermore, the enzyme maintained residual activity of greater than 80% at 50°C after 15h of incubation. BlExoPG is more active against polygalacturonic acid as compared to methylated pectin, liberating mono galacturonic acid as a unique product. Its enzymatic parameters are Vmax=4.18µM.s-1,Km=3.25mgmL-1 and kcat=2.58s-1.

A novel pH-stable, endoglucanase (JqCel5A) isolated from a salt-lake microorganism, Jonesia quinghaiensis

Background: Endoglucanase, one of three type cellulases, can randomly cleave internal p-1,4-linkages in cellulose polymers. Thus, it could be applied in agricultural and industrial processes. Results: A novel endoglucanase gene (JqCel5A) was cloned from Jonesia quinghaiensis and functionally expressed in Escherichia coli Rosetta (DE3). It contained 1722 bp and encoded a 573-residue polypeptide consisting of a catalytic domain of glycoside hydrolase family 5 (GH5) and a type 2 carbohydrate-binding module (CBM2), together with a predicted molecular mass of 61.79 kD. The purified JqCel5A displayed maximum activity at 55°C and pH 7.0, with 21.7 U/mg, 26.19 U/mg and 4.81 U/mg towards the substrate carboxymethyl cellulose, barley glucan and filter paper, respectively. Interestingly, JqCel5A exhibited high pH stability over a broad pH range of pH (3-11), and had good tolerance to a wide variety of deleterious chemicals including heavy metals and detergent. The catalytic mechanism of JqCel5A was also investigated by site mutagenesis and homology-modeling in this study. Conclusions: It was believed that these properties might make JqCel5A to be potentially used in the suitable industrial catalytic condition, which has a broad pH fluctuation and/or chemical disturbance.

The influence of pH, polyethylene glycol and polyacrylic acid on the stability of stem bromelain

Enzyme stability is critical in biotechnology, pharmaceutical and cosmetic industries. Investigations on this subject have drawn attention because of its practical application. Bromelain is a thiol-endopeptidase, obtained from pineapple (Ananas comosus), known for its clinical and therapeutic applications, particularly to selective burn debridement and improvement of antibiotic action and anti-inflammatory activities. To date, the use of bromelain in pharmacological or industrial applications is limited, due to commercial availability, costs, and sensitivity to pH and temperature. Therefore, a better understanding of enzyme stability would be of great interest. The aim of this study was to evaluate bromelain activity and stability in several pH (2.0 to 8.0) and in polyethylene glycol and polyacrylic acid solutions. We observed that bromelain was able to maintain its stability at pH 5.0 for the temperatures studied. PEG solutions increased bromelain stability, but PAA solutions had the opposite effect.

Estabilidade de enzimas é uma questão fundamental em indústrias biotecnológicas, farmacêuticas e cosméticas. As investigações sobre o assunto têm chamado a atenção por sua aplicação prática. A bromelina é uma tiol-endopeptidase, obtida a partir do abacaxi (Ananas comosus). É conhecida por suas aplicações clínicas e terapêuticas, especialmente para desbridamento seletivo de queimaduras, melhoria de ações antibiótica e de atividades anti-inflamatórias. Até o momento, a utilização da bromelina em aplicações farmacológicas industriais é limitada, devido à disponibilidade comercial, os custos, a sensibilidade ao pH e temperatura. Portanto, a maior compreensão da estabilidade desta enzima seria de grande interesse. O objetivo deste estudo foi avaliar a estabilidade da atividade da bromelina em vários pH (2,0 a 8,0) e em soluções de polietilenoglicol e de ácido poliacrílico. Observamos que a bromelina foi capaz de manter a sua estabilidade em pH 5.0, em todas as temperaturas estudadas. Soluções de PEG aumentaram a estabilidade da bromelina, enquanto que soluções de PAA obtiveram efeito oposto.