RESUMO
Flow assurance is a long-term challenge for oil and gas exploration as it plays a key role in designing safe and efficient operation techniques to ensure the uninterrupted transport of reservoir fluids. In this regard, the sensitive monitoring of the scale formation process is important by providing an accurate assessment of the minimum inhibitor concentration (MIC) of antiscale products. The optimum dosage of antiscale inputs is of pivotal relevance as their application at concentrations both lower and higher than MIC can imply pipeline blockages, critically hindering the entire supply chain of oil-related inputs and products to society. Using a simple and low-cost impedimetric platform, we here address the monitoring of the scale formation on stainless-steel capillaries from its early stages under real topside (ambient pressure and 60 °C) and subsea (1000 psi and 80 °C) sceneries of the oil industry. The method could continuously gauge the scale formation with a sensitivity higher than the conventional approach, i.e., the tube blocking test (TBT), which proved to be mandatory for avoiding misleading inferences on the MIC. In fact, whereas our sensor could entail accurate MICs, as confirmed by scanning electron microscopy, TBT suffered from negative deviations, with the predicted MICs being lower than the real values. Importantly, the impedance measurements were performed through a hand-held, user-friendly workstation. In this way, our method is envisioned to deliver an attractive and readily deployable platform to combat the scale formation issues because it can continuously monitor the salt precipitation from its early stages and yield the accurate determination of MIC.
RESUMO
The development of a tailored filament is reported composed of reduced graphene oxide (rGO) and carbon black (CB) in a polylactic acid (PLA) matrix and its use in the production of electrochemical sensors. The electrodes containing rGO showed superior performance when compared with those prepared in the absence of this material. Physicochemical and electrochemical characterizations of the electrodes showed the successful incorporation of both rGO and CB and an improved conductivity in the presence of rGO (lower resistance to charge transfer). As a proof-of-concept, the developed electrodes were applied to the detection of the forensic analytes TNT and cocaine. The electrodes containing rGO presented a superior analytical performance for both TNT and cocaine detection, showing the lower limit of detection values (0.22 and 2.1 µmol L-1, respectively) in comparison with pure CB-PLA electrodes (0.93 and 11.3 µmol L-1, respectively). Besides, better-defined redox peaks were observed, especially for TNT, as well as increased sensitivity for both molecules.
RESUMO
Herein, we present the first 3D-printed electrochemical portable biodevice for the detection of monkeypox virus (MKPV). The electrochemical device consists of two biosensors: an immunosensor and a genosensor specifically designed for the detection of the protein A29 and a target DNA of MKPV, respectively. The electrodes were manufactured using lab-made ultraflexible conductive filaments composed of carbon black, recycled PLA from coffee pods, and castor oil as a plasticizer. The sensors created through 3D printing technology exhibited good reproducibility and repeatability of analytical responses. Furthermore, both the immunosensor and genosensor demonstrated excellent MKPV detection capabilities, with a linear range from 0.01 to 1.0 µmol L-1 for the antigen and 0.1 to 20.0 µmol L-1 for the DNA target. The biosensors achieved limits of detection of 2.7 and 29 nmol L-1 for the immunosensor and genosensor, respectively. Interference tests conducted with the biosensors demonstrated their selectivity for MKPV. Moreover, analyses of fortified human serum samples showed recoveries close to 100%, confirming the absence of significant matrix effects for MKPV analysis. Therefore, the 3D-printed multiplex device represents a viable and highly promising alternative for on-site, portable, and rapid point-of-care MKPV monitoring.
RESUMO
Leptospirosis is an anthropozoonosis of economic and public health importance, caused by bacteria of the genus Leptospira. Horses are deemed important in its transmission chain due to their proximity to humans, and because the species is often asymptomatic, making these animals potential silent reservoirs. In this context, the objectives of this study were to determine the prevalence of seropositive horses for Leptospira spp., and to identify the presence of Leptospira spp. serogroups and antibody titers, the occurrence of areas with higher density of infection cases and demographic characteristics associated with seropositivity in the states of Paraíba (PB), Pernambuco (PE), Rio Grande do Norte (RN) and Ceará (CE), in the Northeast region of Brazil, during rainy (May and June) and dry (October and November) seasons from 2017 to 2019. Using the microscopic agglutination test (MAT), 1152 equine serum samples from 225 municipalities were analyzed. Anti-Leptospira antibodies were detected in 23.9â¯% (95â¯% CI= 21.4 - 26.3â¯%) of the samples in the three-year period, with a frequency of 30.4â¯% (95â¯% CI= 26.7 - 34.2â¯%) during the rainy period (with greater emphasis on the Ballum serogroup) and 17.4â¯% (95â¯% CI= 14.3 - 20.5â¯%) in the dry period (with greater emphasis on the Sejroe serogroup). Age of horses ≥ 6 years (6-10 years, 11-15 years and ≥ 16 years), rainy season, and animal belonging to Pernambuco state were factors with higher seropositivities. Regarding spatial distribution, a higher percentage of seropositive animals was observed in Pernambuco (P < 0.05), in interstate border areas, and large urban centers, with a spatial cluster detected in the dry season of 2018 with relative risk of 2.8 (P = 0.049) times higher in municipalities within the cluster. It is suggested that measures for controlling rodents and contact with wild animals in equine farming, both in rainy and dry periods, combined with care regarding the use of pastures shared with cattle and the adoption of immunoprophylaxis are important in preventing and controlling leptospirosis in horses in the Northeast region of Brazil.
Assuntos
Doenças dos Cavalos , Leptospira , Leptospirose , Estações do Ano , Animais , Cavalos , Leptospirose/veterinária , Leptospirose/epidemiologia , Leptospirose/microbiologia , Brasil/epidemiologia , Doenças dos Cavalos/epidemiologia , Doenças dos Cavalos/microbiologia , Leptospira/isolamento & purificação , Leptospira/imunologia , Estudos Soroepidemiológicos , Prevalência , Masculino , Feminino , Anticorpos Antibacterianos/sangue , Análise Espacial , SorogrupoRESUMO
Preeclampsia (PE) is a hypertensive pregnancy syndrome associated with target organ damage and increased cardiovascular risks, necessitating antihypertensive therapy. However, approximately 40% of patients are nonresponsive to treatment, which results in worse clinical outcomes. This study aimed to compare circulating proteomic profiles and identify differentially expressed proteins among 10 responsive (R-PE), 10 nonresponsive (NR-PE) patients, and 10 healthy pregnant controls (HP). We also explored correlations between these proteins and clinical data. Plasma protein relative quantification was performed using mass spectrometry, followed by bioinformatics analyses with the UniProt database, PatternLab for Proteomics 4.0, and MetaboAnalyst software (version 6.0). Considering a fold change of 1.5, four proteins were differentially expressed between NR-PE and R-PE: one upregulated (fibronectin) and three downregulated (pregnancy-specific beta-1-glycoprotein 1, complement C4B, and complement C4A). Between NR-PE and HP, six proteins were differentially expressed: two upregulated (clusterin and plasmin heavy chain A) and four downregulated (apolipoprotein L1, heparin cofactor II, complement C4B, and haptoglobin-related protein). Three proteins were differentially expressed between R-PE and HP: one downregulated (transthyretin) and two upregulated (apolipoprotein C1 and hemoglobin subunit beta). These findings suggest a complex interplay of these proteins involved in inflammatory, immune, and metabolic processes with antihypertensive therapy responsiveness and PE pathophysiology.
Assuntos
Anti-Hipertensivos , Pré-Eclâmpsia , Proteômica , Humanos , Feminino , Gravidez , Pré-Eclâmpsia/sangue , Pré-Eclâmpsia/metabolismo , Pré-Eclâmpsia/tratamento farmacológico , Anti-Hipertensivos/uso terapêutico , Anti-Hipertensivos/farmacologia , Adulto , Proteômica/métodos , Proteoma/metabolismo , Biomarcadores/sangue , Biologia Computacional/métodos , Estudos de Casos e ControlesRESUMO
BACKGROUND: The aim of this study was to evaluate the incidence of preloading crestal bone loss (PLCBL) and to identify the patient-related and implant-related factors associated with PLCBL. METHODS: This retrospective cohort examined the dental records of patients who received at least one dental implant. PLCBL was defined as a reduction ⩾0.5 mm and severe PLCBL (primary variable) as a reduction ⩾1.5 mm in mesial and/or distal bone level, measured from the day of implant placement to uncovering or abutment installation/crown delivery. The incidence of PLCBL and patient and implant variables were recorded. Bivariate analysis and binary logistic regression identified factors associated with PLCBL ⩾0.5 mm and ⩾1.5 mm. RESULTS: A total of 746 dental implants placed in 361 patients from January 2011 to July 2021 was included in the analyses. Of the implants assessed, 24.4% (n = 182) exhibited PLCBL ⩾ 0.5 mm and 10.5% (n = 78) presented severe PLCBL (i.e., ⩾1.5 mm). Males (odds ratio [OR] = 1.85, 95% confidence interval [CI] = 1.11-3.07), patients with diabetes (OR = 3.33, 95% CI = 1.73-6.42), and those allergic to penicillin (OR = 3.13, 95% CI = 1.57-6.22) were more likely to experience severe PLCBL (p < 0.05). Implants placed in the anterior area (OR = 2.08, 95% CI = 1.16-3.73), with bone-level platform-abutment connection (OR = 4.73, 95% CI = 1.94-11.49) and inserted supracrestally (OR = 3.77, 95% CI = 1.84-7.72), presented a greater risk of developing severe PLCBL (p < 0.05). Implants placed in a previously grafted area presented a lower likelihood of developing severe PLCBL (OR = 0.489, 95% CI = 0.28-0.84). CONCLUSION: The incidence of PLCBL ⩾ 0.5 mm and ⩾1.5 mm was 24.4% and 10.5%, respectively. Male sex, diabetes, allergy to penicillin, anterior location, bone-level platform-abutment connection, and supracrestal implant placement are potential risk factors for severe PLCBL. A previously grafted area is a potential protective factor.
Assuntos
Perda do Osso Alveolar , Implantes Dentários , Humanos , Masculino , Estudos Retrospectivos , Feminino , Pessoa de Meia-Idade , Perda do Osso Alveolar/epidemiologia , Incidência , Idoso , Adulto , Fatores de Risco , Implantação Dentária Endóssea/métodos , Fatores Sexuais , Idoso de 80 Anos ou maisRESUMO
The evolving prevalence of anabolic androgenic steroids (AAS) abuse among nonathletes is alarming because of the known harm to an individual's health. Among the adverse effects of AAS abuse, male infertility and sexual dysfunction have been often reported in the literature, but little is known regarding its actual prevalence, possible underpinning mechanisms, and potential treatments either during or post-AAS usage. Thus, the current narrative review summarizes the state-of-art regarding the effects of AAS on male fertility and sexual function. Evidence was gathered from the latest reviews and recent original studies, specifically from prospective cohorts and clinical trials, ultimately resulting in five main topics of discussion. First, AAS usage is briefly characterized by its historical background, main physiological mechanisms, and the most frequently used AAS substances. Second, data on the prevalence of AAS-induced male infertility and sexual dysfunction are described. Third, some new insights on possible underpinning mechanisms of AAS-induced male infertility and sexual dysfunction are thoroughly discussed, with particular attention to histological data derived from animal models and the latest insights from prospective cohorts in humans. Fourth, the potential treatments during and after the AAS usage are presented, highlighting the odds of resolving male infertility and sexual dysfunction. Fifth, future directions on this topic are discussed, focusing on the methodological robustness of scientific studies.
RESUMO
Additive manufacturing is a technique that allows the construction of prototypes and has evolved a lot in the last 20 years, innovating industrial fabrication processes in several areas. In chemistry, additive manufacturing has been used in several functionalities, such as microfluidic analytical devices, energy storage devices, and electrochemical sensors. Theophylline and paracetamol are important pharmaceutical drugs where overdosing can cause adverse effects, such as tachycardia, seizures, and even renal failure. Therefore, this paper aims at the development of miniaturized electrochemical sensors using 3D printing and polylactic acid-based conductive carbon black commercial filament for theophylline and paracetamol detection. Electrochemical characterizations of the proposed sensor were performed to prove the functionality of the device. Morphological characterizations were carried out, in which chemical treatment could change the surface structure, causing the improvement of the analytical signal. Thus, the detection of theophylline at a linear range of 5.00-150 µmol L-1 with a limit of detection of 1.2 µmol L-1 was attained, and the detection of paracetamol at a linear range of 1.00-200 µmol L-1 with a limit of detection of 0.370 µmol L-1 was obtained, demonstrating the proposed sensor effectively detected pharmaceutical drugs.
Assuntos
Acetaminofen , Técnicas Eletroquímicas , Poliésteres , Fuligem , Teofilina , Acetaminofen/análise , Fuligem/química , Técnicas Eletroquímicas/métodos , Teofilina/análise , Poliésteres/química , Limite de Detecção , Impressão Tridimensional , MiniaturizaçãoAssuntos
Composição Corporal , Diabetes Mellitus Tipo 2 , Exercício Físico , Controle Glicêmico , Treinamento Resistido , Humanos , Diabetes Mellitus Tipo 2/terapia , Diabetes Mellitus Tipo 2/sangue , Composição Corporal/fisiologia , Exercício Físico/fisiologia , Glicemia/metabolismo , Masculino , Feminino , Pessoa de Meia-Idade , Hemoglobinas Glicadas/metabolismoRESUMO
OBJECTIVE: The aim of this study was to evaluate the accuracy of the Root ZX II (RZX), Raypex 6 (RAY), EPex Pro (EPEX), and CanalPro (CNP) electronic foramen locators (EFLs) in different foraminal morphologies (fully formed foramen, immature foramen with parallel walls, and immature foramen with divergent walls); this article also evaluated the influence of different penetration levels (0.0 mm and -1.0 mm). MATERIALS AND METHODS: Thirty single-rooted human premolars were accessed and had their cervical/middle thirds prepared with SX ProTaper files. The apical foramens (AF) were standardized to 250 µm and the initial root canal length (RCL1) was measured under 16x magnification with aid of a digital caliper. Using the alginate model, electronic measurements (EM) were taken 1.0 mm up to AF (EM1/-1) and at AF (EM1/0), always using adjusted hand K-files. The root apexes were then cross-sectioned 3.0 mm from the foramen; then, new RCL (RCL2) and electronic measurements were performed (EM2/-1 and EM2/0.0). Finally, retropreparations were performed with instruments SX ProTaper files introduced 4.0 mm in the apicocervical direction. Then new RCL (RCL3) and electronic measurements (EM3/-1 and EM3/0) were performed. STATISTICAL ANALYSIS: Values were tabulated and tested for normality using the Shapiro-Wilk test, which yielded nonparametric distributions of the data. Data were subjected to the Kruskal-Wallis and Dunn tests to estimate possible differences between devices as a function of foramen morphology and/or apical limit. The significance level was set at 5.0%. RESULTS: In general, the EFLs were accurate in determining the RCL. Statistically significant differences were observed between EPEX and RAY at 0.0, when measuring the divergent AF canals (p < 0.05). Regarding the different foramen morphologies in each EFL, RZX and EPEX showed no interference (p > 0.05), whereas RAY and CNP had lower accuracy levels at 0.0 with divergent AF (p < 0.05). CONCLUSION: The four devices evaluated are accurate to determine the RCL in the conditions tested. The apical limit of penetration did not have significant influence on their accuracy. Conversely, the presence of divergence in the AF walls negatively influenced de RAY and CNP precisions at the foraminal level.
RESUMO
Previous studies of DNA sequence and karyotypic data have revealed high genetic diversity in the Physalaemus cuvieri - Physalaemus ephippifer species complex-a group of small leptodactylid frogs in South America. To date, seven major genetic lineages have been recognized in this group, with species delimitation tests supporting four to seven of them as valid species. Among these, only P. ephippifer shows heteromorphic sex chromosomes, but the implications of cytogenetic divergence for the evolution of this group are unknown. We analyzed karyotypic, mitochondrial DNA, and 3RAD genomic data to characterize a putative contact zone between P. ephippifer and P. cuvieri Lineage 1, finding evidence for admixture and karyotypic evolution. We also describe preliminary evidence for admixture between two other members of this species complex-Lineage 1 and Lineage 3 of P. cuvieri. Our study sheds new light on evolutionary relationships in the P. cuvieri - P. ephippifer species complex, suggesting an important role of karyotypic divergence in its evolutionary history and underscoring the importance of hybridization as a mechanism of sex chromosome evolution in amphibians.
Assuntos
Anuros , Cromossomos Sexuais , Animais , Cariotipagem , Anuros/genética , Cariótipo , Cromossomos Sexuais/genética , América do Sul , Filogenia , Evolução MolecularRESUMO
Background: Food allergy has considerably increased in recent years and this situation has been aggravated mainly by the consumption of more processed and complex foods, since minor or potentially allergenic foods are not required to be labeled. Manihot esculenta (cassava) is a widely consumed food in South America, Africa, and Asia and can be used in the production of flour and starch, as well as several other products. This root can cause allergic reactions with symptoms ranging from mild to severe. Methods: Thus, the aim of this study was the characterization of the immunogenic cassava proteins responsible for sensitizing patients allergic to it. Using a 2D-SDS-PAGE based proteomic approach, six proteins were identified, including Fructose Bisphosphate Aldolase (FBA). Recombinant FBA was produced in Expi293 cells and evaluated by immunoblotting with the serum of 10 individual study subjects. Results: Our results showed six cassava IgE-reactive proteins. From those, recombinant fructose bisphosphate aldolase (FBA) showed a positivity of 80% among tested sera, proving to be a highly sensitizing protein. Conclusion: The recombinant FBA molecule obtained in this study can be important for in vivo diagnostic assays, by producing more accurate results, and for desensitization protocols, in which the use of the isolated molecule produces more precise results by avoiding secondary sensitization. Trial registration: All patients signed a consent form approved by the internal ethics committee CAPPesq, Comissão de Ética para Análise de Projetos de Pesquisa do HC FMUSP (CAAE: 10420619.6.0000.0068).
RESUMO
Multidrug-resistant K. pneumoniae is one of the main causes of hospital-acquired infections worldwide and frequently carries antimicrobial resistance genes in moving elements. In this study, we described a K. pneumoniae clinical isolate carrying simultaneous chromosomal blaKPC, and plasmid-mediated blaNDM and blaOXA-9. The isolate is multidrug-resistant and belongs to ST 225. While blaKPC were identified in the chromosome, the blaNDM was mediated by IncFII(K) plasmid and the blaOXA-9, in a IncFIB(K) plasmid. The blaKPC context was composed by Tn4401 transposon and two insertion sequences ISKpn6 and ISKpn7. The co-production of diverse ß-lactamases brings an alert about a new adaptive profile of K. pneumoniae strains and their dissemination in the hospital-acquired infectious.
Assuntos
Infecções por Klebsiella , Klebsiella pneumoniae , Humanos , Klebsiella pneumoniae/genética , Antibacterianos/farmacologia , Brasil , beta-Lactamases/genética , Plasmídeos/genética , Cromossomos , Testes de Sensibilidade MicrobianaRESUMO
STATEMENT OF PROBLEM: The success rate of monolithic polymer-infiltrated ceramic posterior crowns after 1 year is unclear. PURPOSE: The purpose of this controlled, randomized, and double-blind clinical trial was to evaluate the performance of posterior complete crowns in polymer-infiltrated and lithium disilicate ceramics and to assess the impact of oral rehabilitation on esthetic satisfaction, quality of life, and periodontal health. MATERIAL AND METHODS: A total of 33 crowns were provided in 18 participants allocated to 2 groups: Control (Lithium disilicate-IPS e.max CAD; Ivoclar AG) and Experimental (Polymer-infiltrated ceramic-Vita Enamic; Vita Zahnfabrik). The crowns were evaluated before treatment (T0) and after 1 (T1), 6 (T2), and 12 (T3) months by using modified United States Public Health Service (USPHS) criteria, visual analog scales (VASs), oral impacts on daily performances (OIDP), and periodontal parameters. Survival analysis was performed by using Kaplan-Meier followed by the log-rank test (α=.05). The OIDP and USPHS data were analyzed descriptively while VASs for esthetic satisfaction and periodontal parameters were statistically evaluated by using the Mann-Whitney Friedman, and Wilcoxon post hoc tests. RESULTS: For 18 participants with a mean age of 47.2 years, 19 crowns were manufactured in lithium disilicate and 14 in polymer-infiltrated ceramic. The Kaplan-Meier test revealed similar survival rates of 92.5% for polymer-infiltrated ceramic and 94.7% for lithium disilicate (P>.05). The analysis of periodontal parameters revealed a significant increase in the bleeding on probing (BOP) for polymer-infiltrated ceramics (P=.032) but for lithium disilicate, it was not significant (P=.387). CONCLUSIONS: Survival rates between the evaluated materials were not significantly different, with acceptable clinical performance after 1 year of follow-up.
RESUMO
Certified reference materials (CRM) of amphetamine derivatives were produced through a simple, rapid and efficient synthesis in both batch and continuous-flow conditions, accompanied by the development of a comprehensive certification protocol for this class of substances. Our chemistry enabled the synthesis of MDA, MDMA, PMA and PMMA in two steps from safrole and estragole with overall yields of 38-61 % in 48â hours under batch conditions and 61-65 % in 65â minutes under continuous-flow conditions, followed by the development of a certification protocol for these materials through identity checking, homogeneity, stability, and characterization studies. Furthermore, as result of this work, a very pure CRM of MDA.HCl with 99.1±1.4â g/100â g of certified characterization value was produced. Considering the importance of supplying amphetamine calibrants for public security efforts in Forensic Chemistry, the potential therapeutical applications, and responding to the rising demand for the synthesis of CRM, this work presents a pioneering approach for the production of amphetamine and related compounds.
RESUMO
The appearance of new viruses and diseases has made the development of rapid and reliable diagnostic tests crucial. In light of it, we proposed a new method for assembling an electrochemical immunosensor, based on a one-step approach for selective layer formation. For this purpose, a mixture containing the immobilizing agent (polyxydroxybutyrate, PHB) and the recognition element (antibodies against SARS-CoV-2 nucleocapsid protein) was prepared and used to modify a screen-printed carbon electrode with electrodeposited graphene oxide, for the detection of SARS-CoV-2 nucleocapsid protein (N-protein). Under optimum conditions, N-protein was successfully detected in three different matrixes - saliva, serum, and nasal swab, with the lowest detectable values of 50 pg mL-1, 1.0 ng mL-1, and 50 pg mL-1, respectively. Selectivity was assessed against SARS-CoV-2 receptor-binding domain protein (RBD) and antibodies against yellow fever (YF), and no significant response was observed in presence of interferents, reinforcing the suitability of the proposed one-step approach for selective layer formation. The proposed biosensor was stable for up to 14 days, and the mixture was suitable for immunosensor preparation even after 60 days of preparation. The proposed assembly strategy reduces the cost, analysis time, and waste generation. This reduction is achieved through miniaturization, which results in the decreased use of reagents and sample volumes. Additionally, this approach enables healthcare diagnostics to be conducted in developing regions with limited resources. Therefore, the proposed one-step approach for selective layer formation is a suitable, simpler, and a reliable alternative for electrochemical immunosensing.
Assuntos
Técnicas Biossensoriais , COVID-19 , Humanos , COVID-19/diagnóstico , Imunoensaio , SARS-CoV-2 , Anticorpos , Proteínas do NucleocapsídeoRESUMO
PURPOSE: The present study aims to assess the impact of the local language on the view count of patient-oriented educational Sports Medicine videos in an Orthopaedic and Sports Medicine Hospital in the Middle East and North Africa. METHODS: An observational study on English and Arabic versions of Aspetar's YouTube channel patient-oriented educational video series was conducted in February 2023, comparing the view count and viewer characteristics. Included videos were posted either simultaneously or in English version first, in both languages, and shared on the same media platforms. Collected data of interest included video title, view count in each language, age and sex of the viewers, location, and traffic source. RESULTS: Eleven videos of the patient-oriented educational video series were included in the present study. Except for one, the view count was significantly higher in the Arabic version of all 11 videos (minimum sevenfold, P = 0.03). Viewers were predominantly males (73.9%) and between 18 and 44 years old (81.1%). Eleven out of 19 countries of the Middle East and North Africa region [11] were among the viewers' top 20 countries. Traffic sources included YouTube search (45.9%), YouTube suggested videos (17%), external sources (14.4%), YouTube browse features (8.5%), and YouTube advertising (6%). CONCLUSION: Patient-oriented educational Sports Medicine videos in Arabic yield higher view counts than their English version in young adult viewers from 11 countries in the Middle East and Africa among the top 20. Content creation on languages with limited online representation could effectively reach the targeted population by breaking language barriers.
Assuntos
Mídias Sociais , Masculino , Adulto Jovem , Humanos , Adolescente , Adulto , Feminino , Idioma , África do Norte , Oriente Médio , África , Gravação em VídeoRESUMO
Aim: Our study evaluated the activity of sertraline (SER) alone and associated with antifungal drugs in planktonic Candida spp. strains, and investigated its mechanism of action. Materials & methods: Broth microdilution method and minimum fungicidal concentration/MIC ratio were used to assess SER anticandidal activity, and the interaction with antifungals was determined by fractional inhibitory concentration index. The mechanism of action was investigated by flow cytometry and in silico tests. Results: SER inhibited Candida spp. strains at low concentrations by the fungicidal effect and showed no loss of effectiveness when combined. Its action seemed to be related to the membrane and cell wall biosynthesis inhibition. Conclusion: SER has activity against Candida spp. isolated and associated with antifungals, and acts by causing cell wall and membrane damage.