Comparing the electrochemical degradation of the fluoroquinolone antibiotics norfloxacin and ciprofloxacin using distinct electrolytes and a BDD anode: evolution of main oxidation byproducts and toxicity.

The effects of the supporting electrolytes (SEs) Na2SO4, NaCl, Na2CO3, NaNO3, and Na3PO4 on the anodic oxidation of norfloxacin (NOR) and ciprofloxacin (CIPRO), assessed by the respective degradation kinetics and byproducts and electrolyzed solution antimicrobial activity, are compared. Galvanostatic anodic oxidations were performed in a filter-press flow cell fitted with a boron-doped diamond anode. Removal rates higher than the theoretical one for a process purely controlled by mass transfer were found for all SEs, indicative of contribution by indirect oxidation processes. However, the removal rates for NaCl were about tenfold higher, with the lowest energy consumption per order (EC O) of targeted pollutant removal rate (ca. 0.7 kW h m-3 order-1), a very competitive performance. The TOC removal rates were also affected by the SE, but not as markedly. The antimicrobial activity of the electrolyzed solutions against Escherichia coli showed distinct temporal profiles, depending on the fluoroquinolone and SE. For instance, when Na3PO4 was used, the antimicrobial activity was completely removed for NOR, but none for CIPRO; conversely, when NaCl was used, complete removal was attained only for CIPRO. From LC-MS/MS analyses of Na3PO4 electrolyzed solutions, rupture of the fluoroquinolone ring leading to byproducts with no toxicity against E. coli occurred only for NOR, whereas exactly the opposite occurred for the NaCl solutions. Clearly, the nature of both the SE and the fluoroquinolone influence the oxidation steps of the respective molecule; this was also evidenced by the distinct short-chain carboxylic acids identified in the degradation of NOR and CIPRO.

Electrochemical degradation of the antibiotic ciprofloxacin in a flow reactor using distinct BDD anodes: Reaction kinetics, identification and toxicity of the degradation products.

The performances of distinct BDD anodes (boron doping of 100, 500 and 2500 ppm, with sp3/sp2 carbon ratios of 215, 325, and 284, respectively) in the electrochemical degradation of ciprofloxacin - CIP (0.5 L of 50 mg L-1 in 0.10 M Na2SO4, at 25 °C) were comparatively assessed using a recirculating flow system with a filter-press reactor. Performance was assessed by monitoring the CIP and total organic carbon (TOC) concentrations, oxidation intermediates, and antimicrobial activity against Escherichia coli as a function of electrolysis time. CIP removal was strongly affected by the solution pH (kept fixed), flow conditions, and current density; similar trends were obtained independently of the BDD anode used, but the BDD100 anode yielded the best results. Enhanced mass transport was achieved at a low flow rate by promoting the solution turbulence within the reactor. The fastest complete CIP removal (within 20 min) was attained at j = 30 mA cm-2, pH = 10.0, and qV = 2.5 L min-1 + bypass turbulence promotion. TOC removal was practically accomplished only after 10 h of electrolysis, with quite similar performances by the distinct BDD anodes. Five initial oxidation intermediates were identified (263 ≤ m/z ≤ 348), whereas only two terminal oxidation intermediates were detected (oxamic and formic acids). The antimicrobial activity of the electrolyzed CIP solution was almost completely removed within 10 h of electrolysis. The characteristics of the BDD anodes only had a marked effect on the CIP removal rate (best performance by the least-doped anode), contrasting with other data in the literature.