U-Net enhanced real-time LED-based photoacoustic imaging.

Photoacoustic (PA) imaging is hybrid imaging modality with good optical contrast and spatial resolution. Portable, cost-effective, smaller footprint light emitting diodes (LEDs) are rapidly becoming important PA optical sources. However, the key challenge faced by the LED-based systems is the low light fluence that is generally compensated by high frame averaging, consequently reducing acquisition frame-rate. In this study, we present a simple deep learning U-Net framework that enhances the signal-to-noise ratio (SNR) and contrast of PA image obtained by averaging low number of frames. The SNR increased by approximately four-fold for both in-class in vitro phantoms (4.39 ± 2.55) and out-of-class in vivo models (4.27 ± 0.87). We also demonstrate the noise invariancy of the network and discuss the downsides (blurry outcome and failure to reduce the salt & pepper noise). Overall, the developed U-Net framework can provide a real-time image enhancement platform for clinically translatable low-cost and low-energy light source-based PA imaging systems.

Celiac Disease: Risks of Cross-Contamination and Strategies for Gluten Removal in Food Environments.

Celiac disease (CD) is the chronic immune-mediated enteropathy of the small bowel, manifesting when exposure to gluten occurs in genetically predisposed individuals. Nowadays, the only treatment considered safe for CD is a gluten-free diet (GFD). However, one of the problems faced by celiac patients is the cross-contamination of gluten-free food when preparing meals, in addition to utensils, surfaces and equipment. This study aimed to evaluate cross-contamination in gluten-free products and strategies for removing gluten from cross-contamination in cooking environments. The selection of papers for this integrative review was carried out by searching different databases. Gluten cross-contamination is a global concern for celiac patients in food environments. Although some practices are positive, such as gluten labeling on processed food in several countries, it is crucial to promote good practices in food services around the world. Only a few studies showed effective results in removing gluten from surfaces and utensils; furthermore, sampling was limited, making it difficult to identify appropriate procedures to reduce cross-contamination. The variation in contamination in different kitchen environments also highlighted that celiac patients must continue paying attention to the methods used to prepare gluten-free food. More research is needed, especially into methods of removing gluten from surfaces and utensils, to ensure food safety for celiac patients in many food environments.

Microplastics removal technologies from aqueous environments: a systematic review.

Purpose: Pollution of the environment with all kinds of plastics has become a growing problem. The problem of microplastics is mainly due to the absorption of stable organic pollutants and metals into them, and as a result, their environmental toxicity increases. The main purpose of this study is to investigate the appropriate and efficient methods of removing microplastics from aqueous environments through a systematic review. Methods: Present study designed according to PRISMA guidelines. Two independent researchers followed all process from search to final analysis, for the relevant studies using international databases of PubMed, Scopus and ISI/WOS (Web of Science), without time limit. The search strategy developed based on the main axis of "microplastics", "aqueous environments" and "removal". This research was carried out from 2017 until the March of 2022. All relevant observational, analytical studies, review articles, and a meta-analysis were included. Results: Through a comprehensive systematic search we found 2974 papers, after running the proses of refining, 80 eligible papers included to the study. According to the results of the review, the methods of removing microplastics from aquatic environments were divided to physical (12), chemical (18), physicochemical (27), biological (12) and integrated (11) methods. In different removal methods, the most dominant group of studied microplastics belonged to the four groups of polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyethylene tetra phthalate (PET). Average removal efficiency of microplastics in different processes in each method was as: physical method (73.76%), chemical method (74.38%), physicochemical method (80.44%), biological method (75.23%) and integrated method (88.63%). The highest removal efficiency occurred in the processes based on the integrated method and the lowest efficiency occurred in the physical method. In total, 80% of the studies were conducted on a laboratory scale, 18.75% on a full scale and 1.25% on a pilot scale. Conclusion: According to the findings; different processes based on physical, chemical, physicochemical, biological and integrated methods are able to remove microplastics with high efficiency from aqueous environments and in order to reduce their hazardous effects on health and environment, these processes can be easily used.

Recent innovations and challenges in the eradication of emerging contaminants from aquatic systems.

Presence of emerging pollutants (EPs), aka Micropollutants (MPs) in the freshwater environments is a severe threat to the environment and human beings. They include pharmaceuticals, insecticides, industrial chemicals, natural hormones, and personal care items and the pollutants are mostly present in wastewater generated from urbanization and increased industrial growth. Even concentrations as low as ngL-1 or mgL-1 have proven ecologically lethal to aquatic biota. For several years, the biodegradation of various Micropollutants (MPs) in aquatic ecosystems has been a significant area of research worldwide, with many chemical compounds being discovered in various water bodies. As aquatic biota spends most of their formative phases in polluted water, the impacts on aquatic biota are obvious, indicating that the environmental danger is substantial. In contrast, the impact of these contaminants on aquatic creatures and freshwater consumption is more subtle and manifests directly when disrupting the endocrine system. Research and development activities are expected to enable the development of ecologically sustainable, cost-effective, and efficient treatments for practical systems in the near future. Therefore, this review aims to understand recent emerging pollutants discovered and the available treatment technologies and suggest an innovative and cost-effective method to treat these EPs, which is sustainable and follows the circular bioeconomy.

[Endoluminal balloon dilatation of impacted central venous catheter-Case report and literature review]. / Endoluminale Ballondilatation impaktierter zentralvenöser Katheter ­ Fallbeschreibung und Literaturreview.

BACKGROUND: The long-term application of tunneled central venous catheters leads to the development of firm adhesions between the wall of the vein and the catheter, which makes removal of the catheter difficult or impossible. The treatment options in such cases include abandonment of catheter parts or an open surgical approach up to sternotomy. At present, procedural alternatives are available, which include endovascular techniques such as the use of laser energy and endoluminal dilatation. METHODS: This article describes the successful application of endoluminal dilatation for removal of ingrown central venous catheters in three patients, which had impacted in the superior vena cava and brachiocephalic vein. A 5 Fr (Cordis, Santa Clara, CA, USA) sheath was inserted into one lumen through the severed end of the double lumen catheter. Subsequently, a balloon catheter was inserted into the other lumen to prevent retrograde bleeding or air embolism. Under fluoroscopy a guidewire (0.018, Terumo Medical Corporation, Somerset, New Jersey, USA) was introduced via the sheath to beyond the tip of the hemodialysis catheter into the right atrium. Finally, an angioplasty balloon was inserted (4â€¯× 80 mm) via the guidewire and the complete catheter was sequentially inflated with a pressure of 4 atm. It was then possible to pull out the catheter with no difficulty. RESULTS: This technique resulted in the removal of the central venous catheters in all three patients, without any relevant complications or resistance. CONCLUSION: By dissolving adhesions between the catheter and the vein wall, endoluminal balloon dilatation constitutes a reliable and safe technique for the extraction of impacted central venous hemodialysis catheters and may thus help to avoid further invasive surgical procedures.

A hypothetical model of multi-layered cost-effective wastewater treatment plant integrating microbial fuel cell and nanofiltration technology: A comprehensive review on wastewater treatment and sustainable remediation.

Wastewater management has emerged as an uprising concern that demands immediate attention from environmentalists worldwide. Indiscriminate and irrational release of industrial and poultry wastes, sewage, pharmaceuticals, mining, pesticides, fertilizers, dyes and radioactive wastes, contribute immensely to water pollution. This has led to the aggravation of critical health concerns as evident from the uprising trends of antimicrobial resistance, and the presence of xenobiotics and pollutant traces in humans and animals due to the process of biomagnification. Therefore, the development of reliable, affordable and sustainable technologies for the supply of fresh water is the need of the hour. Conventional wastewater treatment often involves physical, chemical, and biological processes to remove solids from the effluent, including colloids, organic matter, nutrients, and soluble pollutants (metals, organics). Synthetic biology has been explored in recent years, incorporating both biological and engineering concepts to refine existing wastewater treatment technologies. In addition to outlining the benefits and drawbacks of the current technologies, this review addresses novel wastewater treatment techniques, especially those using dedicated rational design and engineering of organisms and their constituent parts. Furthermore, the review hypothesizes designing a multi-bedded wastewater treatment plant that is highly cost-efficient, sustainable and requires easy installation and handling. The novel setup envisages removing all the major wastewater pollutants, providing water fit for household, irrigation and storage purposes.

Composition, formation mechanism, and removal method of off-odor in soymilk products.

Soybean is a protein-rich material for plant-based products, and its application in soymilk products is limited due to its off-odor such as beany. In order to explore a solution to address this issue, composition, formation mechanism, and removal methods of the off-odor produced in the processing of soymilk products are comprehensively described in this paper. The main off-odor compounds in soymilk products include hexanal, hexanol, 1-octene-3-ol, (E,E)-2, 4-decadienal, 2-pentylfuran, (E,E)-2,4-nonadienal, (E)-2-nonenal, (E) -2-hexenal, and so on. These odor compounds are mainly produced by the enzymatic and nonenzymatic oxidation of unsaturated fatty acids. At present, physical methods are used to remove off-odor in the industrial production of soymilk products, of which heat treatment is still the most effective. With the development of no beany soybean breeding technology, the combination of multiple methods will become a technical trend for removing off-odor. Some new research directions are also explored about removal methods, which can provide a theoretical reference for the production and technical research of soymilk products.

Current status of microplastics and nanoplastics removal methods: Summary, comparison and prospect.

In modern society, plastics also play an indispensable role in people's lives due to their various excellent properties. However, when these plastic products are discarded after being used, after being subjected to external influences, they will continue to be worn, damaged and degraded into micro- and nano-scale plastics, which are microplastics and nanoplastics (M/NPs). Although people's attention has been paid to M/NPs at present, the focus is still mainly on the detection and hazard of M/NPs, and how to remove M/NPs is relatively less popular. This review was written in order to draw the attention of more researchers to remove M/NPs. This review first briefly introduces the research background of M/NPs, and also shows the main analytical methods currently used for qualitative and quantitative M/NPs. Then, most of the current literature on the removal of M/NPs was collected, and they were classified, summarized, and introduced according to the classification of physical, physicochemical, and biological methods. The advantages and disadvantages of various methods are summarized, and they are also compared, which can help more researchers choose the appropriate method for research. In addition, the application scenarios of these methods are briefly introduced. Finally, some future research directions are proposed for the current research status of M/NPs removal. It is hoped that this will further promote the development on the method of removing M/NPs.

A review of antiepileptic drugs: Part 1 occurrence, fate in aquatic environments and removal during different treatment technologies.

Antiepileptic drugs (AEDs) are the main treatment for people with epilepsy. However, in recent years, more and more people are using them for other indications such as: migraine, chronic neuropathic pain, and mood disorders. Consequently, the prescriptions and consumption of these drugs are increasing worldwide. In WWTPs, AEDs can resist degradation processes, such as photodegradation, chemical degradation and/or biodegradation. Until now, only constructed wetlands and photocatalysis have shown good removal rates of AEDs from wastewater. However, their effectiveness depends on the specific conditions used during the treatment. Since the consumption of AEDs has increased in the last decade and their degradation in WWTPs is poor, these drugs have been largely introduced into the environment through the discharge of municipal and/or hospital effluents. Once in the environment, AEDs are distributed in the water phase, as suspended particles or in the sediments, suggesting that these drugs have a high potential for groundwater contamination. In this first part of the AEDs review is designed to fill out the current knowledge gap about the occurrence, fate and removal of these drugs in the aquatic environment. This is a review that emphasizes the characteristics of AEDs as emerging contaminants.

Nano and micro architectured cues as smart materials to mitigate recalcitrant pharmaceutical pollutants from wastewater.

Pharmaceuticals have been recognized for saving billions of lives, but they also appear as a novel group of environmental pollutants. The presence of pharmaceutically active residues in seawater, surface water, wastewater treatment plants, sludges, and soils has been widely reported. Their persistence in the environment for extended durations exerts various adverse consequences, such as gene toxicity, hormonal interference, antibiotic resistance, sex organs imposition, and many others. Various methodologies have been envisioned for their removal from the aqueous media. Different processes have been restricted due to high cost, inefficient removal, generation of toxic materials, and high capital requirement. The employment of nanostructured materials to mitigate pharmaceutical contaminants has been increasing during the last decades. The adsorptive nanomaterials have a high surface area, low cost, eco-friendliness, and high affinity for inorganic and organic molecules. In this review, we have documented the rising concerns of environmental pharmaceutical contamination and their remediation by applications of nanomaterials. Nanomaterials could be a robust candidate for the removal of an array of environmental contaminants in water.

Selective removal of arsenic in water: A critical review.

Selective removal of arsenic (As) is the key challenge for any of As removal mechanisms as this not only increases the efficiency of removal of the main As species (neutral As(III) and As(V) hydroxyl-anions) but also allows for a significant reduction of waste as it does not co-remove other solutes. Selective removal has a number of benefits: it increases the capacity and lifetime of units while lowering the cost of the process. Therefore, a sustainable selective mitigation method should be considered concerning the economic resources available, the ability of infrastructure to sustain water treatment, and the options for reuse and/or safe disposal of treatment residuals. Several methods of selective As removal have been developed, such as precipitation, adsorption and modified iron and ligand exchange. The biggest challenge in selective removal of As is the presence of phosphate in water which is chemically comparable with As(V). There are two types of mechanisms involved with As removal: Coulombic or ion exchange; and Lewis acid-base interaction. Solution pH is one of the major controlling factors limiting removal efficiency since most of the above-mentioned methods depend on complexation through electrostatic effects. The different features of two different As species make the selective removal process more difficult, especially under natural conditions. Most of the selective As removal methods involve hydrated Fe(III) oxides through Lewis acid-base interaction. Microbiological methods have been studied recently for selective removal of As, and although there have been only a small number of studies, the method shows remarkable results and indicates positive prospects for the future.

Removal of denture adhesives from PMMA and Polyamide denture base materials

Abstract Denture adhesives need complete removal due to their frequent replacement. Objective Our study investigates the removal of denture adhesives from denture base materials, using different methods. Methodology PMMA and Polyamide denture base materials were used to fabricate 120 samples (15×15×1.5mm). One side of the samples was left as processed and the other polished with a usual procedure, hydrated for 24 h, dried, and weighted. They received 0.2 g of three adhesive creams on their unpolished surface (Corega, Olivafix, Fittydent), pressed on polysulfide material, stored under 37°C and 95% rel. humidity for 1 h and 60 of them, following their separation from polysulfide base, brushed under running water, whereas the rest inserted in a cleanser bath (Fittydent Super) for 5 min. The samples were dried and inserted in the oven (37°C) for additional 10 min and weighted again. Roughness tests of denture materials and light microscopy of adhesives creams were also used to evaluate the materials. Time lapse images of spayed with water adhesives on PMMA base were also taken to evaluate the volumetric changes of adhesives. Weight data before and after adhesive removal, indicating the amount of remaining adhesive, were statistically analyzed using Welch's ANOVA and Games-Howell multiple comparisons tests at α=0.05 level of significance. Results Roughness of Polyamide was higher than PMMA and Fittydent showed greater volumetric changes than the others. Significant differences (p<0.05), were found between PMMA and Polyamide bases, between Olivafix and Fittydent adhesives, and between brushing and cleansing methods but only for PMMA-Olivafix combination. Conclusions Adhesives showed a stronger adherence to PMMA surface, and Fittydent was the most difficult to be removed. Removal methods were not effective for all adhesives or denture base materials. These indicate that removal methods, adhesive type and denture base material are all playing a significant role in the removal of adhesives from denture surfaces.

Developing Artefact Removal Algorithms to Process Data from a Microwave Imaging Device for Haemorrhagic Stroke Detection.

In this paper, we present an investigation of different artefact removal methods for ultra-wideband Microwave Imaging (MWI) to evaluate and quantify current methods in a real environment through measurements using an MWI device. The MWI device measures the scattered signals in a multi-bistatic fashion and employs an imaging procedure based on Huygens principle. A simple two-layered phantom mimicking human head tissue is realised, applying a cylindrically shaped inclusion to emulate brain haemorrhage. Detection has been successfully achieved using the superimposition of five transmitter triplet positions, after applying different artefact removal methods, with the inclusion positioned at 0°, 90°, 180°, and 270°. The different artifact removal methods have been proposed for comparison to improve the stroke detection process. To provide a valid comparison between these methods, image quantification metrics are presented. An "ideal/reference" image is used to compare the artefact removal methods. Moreover, the quantification of artefact removal procedures through measurements using MWI device is performed.

Dislodged Coronary Artery Stent Retrieved With an Endovascular Snare.

Advances in stent design and technology have made stent loss during percutaneous coronary intervention rare. When stent loss occurs, the risk of life-threatening procedural complications is high. We describe the use of an endovascular snare system to retrieve a dislodged stent from the proximal right coronary artery of a 54-year-old man during percutaneous coronary intervention after other conventional retrieval techniques had failed.

An overview of removing heavy metals from sewage sludge: Achievements and perspectives.

The removal of heavy metals from sewage sludge (SS) is attracting increasing attention because the presence of toxic heavy metals in SS restricts its reuse or disposal, especially on land. This review presents an overview of research on the origin and chemical speciation of heavy metals in SS and describes methods for their removal. SS primarily absorbs heavy metals from wastewater via passive sorption and active uptake of biomass, resulting in the different chemical speciation. The advantages and disadvantages of the current methods for the removal of heavy metals from SS are analysed. The current methods focus on the removal efficiencies of heavy metals, which are high enough to meet the standard of land application, but the treatment cost, the change and retention of nutrients, and the effects on SS properties resulting from heavy metal removal are usually ignored. In this review, the main knowledge gaps are identified and proposals for future research are made. These should comprise determining the underlying mechanisms of current removal methods, optimising and integrating the removal methods, and establishing systematic evaluation standards for these methods. This review will help researchers develop new environmentally and economically friendly methods for the removal of heavy metals from SS.

Modified Pull-Through Technique for Cardiac Resynchronization Therapy Upgrades in Patients with Occluded Access Veins.

The number of procedures for upgrading implantable devices for cardiac resynchronization therapy has increased considerably during the last decade. A major challenge that operators face in these circumstances is occlusion of the access vein. We have modified a pull-through method to overcome this obstacle. Six consecutive patients with occluded access veins and well-developed collateral networks underwent a procedure in which the occluded vein was recanalized by snaring the existing atrial lead via transfemoral access. Upgrading the device was successful in all patients; none had intraprocedural complications. Our experience shows that our modified pull-through technique may be a feasible alternative for upgrading cardiac resynchronization therapy in patients with venous occlusion.

[Current situation of heavy metal pollution,detection and removal techniques in medicinal marine organisms in China].

As an important branch of traditional medicines,medicinal marine organisms have many advantages,including biological diversity,remarkable biological activity,especial for the treatment of anti-cancer,anti-virus,anti-coagulation,analgesia,anti-bacterial,cardiovascular and cerebrovascular diseases. In recent years,with the continuous exploration of marine organisms by human beings,many marine organisms with specific biological activities and medicinal prospects have been found,which have attracted great attention around the world and thus called " new hope" to solve human health problems. However,due to the rapid development of modern industry,heavy metal pollution not only poses a great threat to medicinal marine living resources,but also hinders the development of marine biomedical industry and threatens human health. In view of this,this paper introduced the development trend of medicinal marine organisms and the current situation of heavy metal pollution and focusing on the analysis technology and chemical removal technology of heavy metals in medicinal marine organisms,which is to provide reference for the heavy metals control in marine medicines and the development and utilization of marine medicines.

Current situation of heavy metal pollution,detection and removal techniques in medicinal marine organisms in China / 中国中药杂志

As an important branch of traditional medicines,medicinal marine organisms have many advantages,including biological diversity,remarkable biological activity,especial for the treatment of anti-cancer,anti-virus,anti-coagulation,analgesia,anti-bacterial,cardiovascular and cerebrovascular diseases. In recent years,with the continuous exploration of marine organisms by human beings,many marine organisms with specific biological activities and medicinal prospects have been found,which have attracted great attention around the world and thus called " new hope" to solve human health problems. However,due to the rapid development of modern industry,heavy metal pollution not only poses a great threat to medicinal marine living resources,but also hinders the development of marine biomedical industry and threatens human health. In view of this,this paper introduced the development trend of medicinal marine organisms and the current situation of heavy metal pollution and focusing on the analysis technology and chemical removal technology of heavy metals in medicinal marine organisms,which is to provide reference for the heavy metals control in marine medicines and the development and utilization of marine medicines.

Use of ViperSlide Lubricant to Extract Entrapped Sheath after Severe Radial Artery Spasm during Coronary Angiography.

Radial artery spasm is a known complication of transradial cardiac catheterization. However, severe spasm with sheath entrapment is rare. We describe such a case, and the condition's response to an alternative removal method after conventional efforts failed. A 68-year-old man presented for coronary angiography. We introduced a 5F sheath into the right radial artery, but, because of severe arterial spasm, we could not aspirate blood from the sheath or retract it. We sedated the patient and waited for the spasm to subside; however, the radial sheath remained entrapped. Nitroglycerin injection enabled blood aspiration and vasodilator injection, but not sheath removal. Finally, we injected ViperSlide lubricant into the sheath for its rapid, easy extraction. When sedation and vasodilator therapy fail, we recommend using ViperSlide for radial sheath removal before applying nerve block or general anesthesia.