Interface fails and Young's module approximation of multilayer flexible devices through finite element method.

Electronic flexible devices are prone to degrade their electrical performance or lose functionality when subjected to deformations. Brittle fracture is a common damaging effect observed in devices composed of low-thickness layered materials stacked onto a flexible substrate by dissimilar mechanical properties interaction. This work studies the mechanical behavior of Organic Flexible Solar Cells (OFSC) with a heterostructure PET/ITO/P3HT:PCBM/Ag subjected to uniaxial displacements through an experimental and numeric point of view. Experimental showed that damage proceeds in two ways. First, the formation of a grid crack pattern begins at the ITO layer, and second, the delamination in the ITO/P3HT:PCBM interface. The numerical model analyzed the force and displacements and the absorption/dissipation of strain energy on layers and interfaces of the device. The comparison of the global Young's module for experimental and numeric studies validated the numeric analysis, with results of 4.16 ± 0.05 GPa for experimental and 4.36 ± 0.15 GPa for numeric. Additionally, the model associates the ITO layer with the highest strain energy dissipation or the most prone to failure, which agrees with the experiments. Then, the model successfully predicts the mechanical behavior of OFSC and represents a valuable tool for studying flexible devices and predicting the appearance of mechanical damage when subjected to uniaxial deformations, even being able to avoid potential damage changing parameters such as the thickness of the layers.

The Effect of ZnO on the Failure of PET by Environmental Stress Cracking.

The aim of the present work is to evaluate the effect of NaOH solution as a stress cracking agent on the thermal and tensile properties of PET and PET/ZnO composites. The solutions were applied during tensile testing and the effects were monitored by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and testing the actual mechanical properties. The rate of crystallization was increased when the samples were exposed to NaOH, as observed by both cold and melt crystallization; this is possibly due to the reduction in molar mass of the PET molecules caused by NaOH. During melting, the DSC peaks became more complex, which is probably due to the distinct macromolecular mass, as well as crystallites with different sizes and levels of perfection. According to TGA analyses, no drastic changes were observed on the thermal stability of PET due to the action of NaOH. The tensile properties were shown to decrease drastically upon exposure to NaOH, which is the main symptom of stress cracking, leading to increased fragility, as also observed in the scanning electron microscopy (SEM) images. The presence of ZnO improved PET crystallization and provided some protection against the harmful effects of NaOH.