Effects of including of Japanese Pumpkin Seeds and Pomace in the Diets of Pacific White Shrimp (Penaeus vannamei).

A 60-day feeding trial was conducted to evaluate the effects of including pumpkin seeds and pomace in the diets of Pacific white shrimp Penaeus vannamei, and the effects of these supplements on growth performance, body composition, and total polyphenol, flavonoid and carotenoid contents, as well as on total antioxidant activity, and body color parameters. Five diets were evaluated: pumpkin seeds (PS) at 50 and 100 g·kg-1, pumpkin pomace (PP) at 50 and 100 g·kg-1, and a control treatment. Pacific white shrimp (P. vannamei) juveniles (0.60 ± 0.01 g) were stocked in 15 tanks (310 L), containing 30 shrimps per tank, and the treatments were randomly distributed in triplicate. At the end of the experiment, shrimps were euthanized, weighed, and dissected for further analyses. The inclusion of PS in the diets impaired growth performance, reduced the total flavonoid content and had a pro-oxidative effect on muscle. The inclusion of PP in the diets did not affect growth performance, improved the feed conversion ratio, increased the total flavonoid content in the diets and hepatopancreas, and improved the antioxidant activity of the feeds and shrimp muscle. The total carotenoid content of the feeds increased with the inclusion of PS or PP in the diets; however, the total carotenoid content of shrimp increased only in those fed PP diets. Shrimp fed with PS diets showed a yellowish color and higher saturation when fresh and a reddish color and yellow hue angle after cooking. Shrimp fed PP diets turned reddish and yellowish, both when fresh and after cooking. The inclusion of PS in P. vannamei diets is not recommended; however, PP can be included at 100 g·kg-1 without affecting the growth parameters. Further studies evaluating the inclusion of higher PP levels in shrimp diets are recommended.

Production of Cookies Enriched with Bioactive Compounds through the Partial Replacement of Wheat Flour by Cocoa Bean Shells.

Approximately 500 thousand tons of cocoa bean shells (CSs) are generated annually and treated as waste. However, their composition is of great nutritional, technological, and economic interest due to their dietary fiber (46.4 to 60.6%), protein (11.6 to 18.1%), and lipid contents (2 to 18.5%), as well as the presence of flavonoids and alkaloids. Thus, this study aimed to obtain CS flour by milling the CSs, characterizing the flour according to its chemical composition and functionalities, and then applying it in the production of cookies, substituting a wheat flour portion (10, 20, 30, and 40%) with CS flour. Cookies were characterized in terms of water, lipids, proteins, phenolic (PC), and total flavanol (FLA) contents, and specific volume (SV), hardness (H), and L*, a*, and b color scale parameters. Increasing the amount of CS showed positive results, as the cookies were enriched with PC (0.68 to 2.37 mg gallic acid equivalents/g of sample) and FLA (0.10 to 0.19 mg epicatechin equivalents/g of sample) but increased hardness (353 to 472 N). By associating the responses, it was concluded that the wheat flour replacement with 30% CS presented values of PC and FLA 3 and 1.6 times higher than the control and could be a formulation of interest to consumers.

Mathematical Models to Describe the Foam Mat Drying Process of Cumbeba Pulp (Tacinga inamoena) and Product Quality.

The present study investigated the mathematical modeling foam-mat drying kinetics of cumbeba pulp and the effect of drying conditions on the color and contents of ascorbic acid, flavonoids, and phenolic compounds of the powder pulps obtained. Foam-mat drying was carried out in a forced air circulation oven at temperatures of 50, 60, and 70 °C, testing foam-mat thicknesses of 0.5, 1.0, and 1.5 cm. The increase in the water removal rate is a result of the increase in air temperature and the decrease in the thickness of the foam layer. Among the empirical and semi-empirical mathematical models, the Midilli model was the one that best represented the drying curves in all conditions evaluated. Effective water diffusivity ranged from 1.037 × 10-9 to 6.103 × 10-9 m2 s-1, with activation energy of 25.212, 33.397, and 36.609 kJ mol-1 for foam thicknesses of 0.5, 1.0, and 1.5 cm, respectively. Cumbeba powders showed light orangish colors and, as the drying temperature increased from 50 to 70 °C, for all thicknesses, the lightness value (L*) decreased and the values of redness (+a*) and yellowness (+b*) increased. Foam-mat drying at higher temperatures (60 and 70 °C) improved the retention of ascorbic acid and flavonoids, but reduced the content of phenolic compounds, while the increase in thickness, especially for flavonoids and phenolic compounds, caused reduction in their contents. The foam-mat drying method allowed obtaining a good-quality cumbeba pulp powder.

Effect of Chitosan and Aloe Vera Extract Concentrations on the Physicochemical Properties of Chitosan Biofilms.

Chitosan films have been extensively studied as dressings in formulations for the treatment of chronic wounds. The incorporation of aloe vera (Aloe barbadensis Miller) into chitosan dressings could potentialize the healing process since aloe vera shows several pharmacological activities. This work aimed to evaluate the effect of aloe vera and chitosan concentrations on the physicochemical properties of the developed films. The films were obtained by casting technique and characterized with respect to their color parameters, morphology, barrier and mechanical properties, and thermal analysis. Results showed that the presence of aloe vera modified the films' color parameters, changed barrier properties, increased fluid handling capacity (FHC), and decreased water-vapor permeability (WVP). The reduced elongation at break resulted in more rigid films. Aloe vera concentration did not significantly change film properties, but the presence of this gel increased the films' stability at temperatures below 200 °C, showing similar behavior as chitosan films above 400 °C. The results suggest a crosslinking/complexation between chitosan and aloe vera, which combine appropriate physicochemical properties for application as wound dressing materials.

Microwave Parboiling: Reduction in Process Time, Browning of Rice and Residual Phosphorus Content in the Waste Water.

The conventional prolonged parboiling process results in high operation cost and grain darkening, which may limit consumption. Moreover, residue generation by rice industries is another challenge. The objective of this study was to evaluate the use of microwave irradiation during soaking and gelatinization stages of parboiling rice. Processing time, colorimetric profile, broken and nongelatinized grains, sucrose and glucose content, free 5-hydroxymethyl-2-furfural, and residual phosphorus were evaluated. As the soaking and gelatinization times during microwave treatments increased, the colorimetric parameters increased; however, the values were lower than those with the conventional process. Regardless of soaking time, a decrease in broken and nongelatinized grains was obtained by using the lowest steaming time (5 min). Additionally, lower residual phosphorus content was found in soaking water (10 and 20 min) when using microwave irradiation. Under favorable conditions, a reduction in the levels of broken and nongelatinized grains, residual phosphorus, and color changes was observed, indicating that microwave irradiation may be more beneficial than conventional parboiling. PRACTICAL APPLICATION: Parboiling requires a high volume of water and soaking time, which leads to high costs, underutilization of infrastructures, and high residue in the water after processing. The rapid parboiling process involves the use of microwaves during the soaking and gelatinization stages. The main advantages of the microwave parboiling process include reduced processing time, ranging from 83% to 95%, higher gelatinization, greater yield, reduced darkening, and reduced residual phosphorus in the effluents by 60%. This report can aid industries in streamlining their processes, thereby providing a high-quality, lower cost, and environmentally safe product.

Whey acerola-flavoured drink submitted ohmic heating processing: Is there an optimal combination of the operational parameters?

Whey acerola-flavoured drink was treated using ohmic heating (OH) at 65°C for 30min to evaluate different frequencies (10, 100 and 1000Hz with 25V) and voltages (45, 60 and 80V at 60Hz) and by conventional heating (CH) with the same temperature profile (65°C/30min). Rheology parameters, color changes (h°, C∗, ΔE) microstructure (optical microscopy), and ascorbic acid (AA) degradation kinetics were performed. AA degradation rates ranged from 1.7 to 29.3% and from 2.8 to 24.8% for OH and CH, respectively. The beverages treated with both processes exhibited a pseudo-plastic behavior (n<1), higher saturation (C∗), lesser reddish color (h°), and higher color variations (ΔE∗). In microstructure analysis, OH (1000Hz-25V and 80V-60Hz) was able to rupture the cell structure. The best results were observed at low frequencies and voltage OH processes on whey acerola-flavoured drinks should be performed at low frequencies and voltages (≤100Hz and 45V), an alternating current (A/C). However, despite the use of inert electrodes, the existence of corrosion was not evaluated, being an important information to be investigated.

Estabilidade da cor de doces em massa de polpa de umbu (Spondias tuberosa arr. cam.) no estádio de maturação verde / Color stability of marmalade made from pulp of unripe umbu

Os frutos de umbu (Spondias tuberosa Arr. Cam.) maduros são altamente perecíveis, e o aproveitamento deles no estádio de maturação verde, sob a forma de doce é uma interessante alternativa econômica, para o semi-árido nordestino. A conservação da cor, durante o armazenamento, constitui um fator de qualidade dos mais importantes para o consumo, e o presente trabalho objetivou avaliar sua alteração em função de diferentes formulações, embalagens (polipropileno e celofane) e temperaturas (33 e 43°C), por 90 dias de armazenamento. A adição de pectina e/ou xarope de glicose não alterou a luminosidade (L*), mas diminuiu os valores de a* ( intensidade do vermelho ) e b*. ( intensidade do amarelo). Verificou-se diminuição dos valores de L* a* e b*, notadamente para os doces armazenados à temperatura de 43°C e para a formulação sem adição de pectina. A embalagem não exerceu efeito significativo sobre L*( luminosidade), mas afetou a* e b* aos 90 dias de estocagem, em ambas as temperaturas. Os resultados globais indicaram o uso de pectina e xarope de glicose, embalagens de polipropileno e estocagem à temperaturas mais baixas como sendo as condições mais adequadas para preservação da cor.

Ripe umbu (Spondias tuberosa Arr. Cam.) is highly perishable, thus using unripe umbu to make marmalade is an interesting economic alternative for the semi arid northeastern region in Brazil. Color conservation during storage is one of the major quality factors for consumption. This work aimed to evaluate color alteration in function of different formulations, packagings (polypropylene and cellophane) and temperatures (33 and 43°C) over 90 storage days. Pectin and/or glucose syrup adittion did not alter luminosity (L*), but decreased a* (red intensity) and b*(yellow intensity) values. L* (luminosity), a* ( red intensity) and b* (yellow intensity) values were found to decrease, especially for marmalade stored at 43°C and formulation without pectin addition. The package did not influenced the L* (luminosity), but at 90 days of storage, this factor influenced the values of a* and b* parameters em both temperatures. The overall results indicated the use pectin-and glucose syrup-added formulation , packaging in polypropylene pots and storage at lower temperatures as being the most adequate conditions for color preservation.