A Radiometric Technique for Monitoring the Desulfurization Process of Blister Copper.

In this paper, a novel optical technique for following the progress of the blister copper desulfurization process is presented. The technique is based on the changes observed in the continuous spectrum of the visible-near-infrared (VIS-NIR) radiation that the blister melt emits while the chemical reactions of the sulfur elimination process are taking place. Specifically, the proposed technique uses an optical probe composed of an optical fiber, a collimating lens, and a quartz tube, which is immersed in the melt. This optical probe provides a field of view of the blowing zone where the desulfurization reaction occurs. The experimental results show that the melt VIS-NIR total irradiance evolves inversely to the SO2 concentration reported by a gas analyzer based on differential optical absorption spectroscopy. Furthermore, the blister copper spectral emissivity as well as the total emissivity observed throughout the process show strong correlation with the sulfur content during desulfurization reaction.

Dust emission source characterization for visibility hazard assessment on Lordsburg Playa in Southwestern New Mexico, USA.

In drylands around the world, ephemeral lakes (playas) are common. Dry, wind-erodible playa sediments are potent local and regional sources of dust and PM10 (airborne particles with diameters less than 10 µm). Dust clouds often cause sudden and/or prolonged loss of visibility to travelers on downwind roadways. Lordsburg Playa, in southwestern New Mexico, USA is bisected by Interstate Highway 10. Dust storms emanating from the playa have been responsible for numerous visibility-related road closures (including 39 road closures between 2012 and 2019) causing major economic losses, in addition to well over a hundred dust-related vehicle crashes causing at least 41 lost lives in the last 53 years. In order to improve understanding of the surfaces responsible for the dust emissions, we investigated the critical wind friction velocity thresholds and the dust emissivities of surfaces representing areas typical of Lordsburg Playa's stream deltas, shorelines, and ephemerally flooded lakebed using a Portable In-Situ Wind ERosion Laboratory (PI-SWERL). Mean threshold friction velocities for PM10 entrainment ranged from less than 0.30 m s- 1 for areas in the delta and shoreline to greater than 0.55 m s- 1 for ephemerally flooded areas of the lakebed. Similarly, we quantified mean PM10 vertical flux rates ranging from less than 500 µg m- 2 s- 1 for ephemerally flooded areas of lakebed to nearly 25,000 µg m- 2 s- 1 for disturbed delta surfaces. The unlimited PM10 supply of the relatively coarse sediments along the western shoreline is problematic and indicates that this may be the source area for longer-term visibility reducing dust events and should be a focus area for dust mitigation efforts.

Infrared optical and thermal properties of microstructures in butterfly wings.

While surface microstructures of butterfly wings have been extensively studied for their structural coloration or optical properties within the visible spectrum, their properties in infrared wavelengths with potential ties to thermoregulation are relatively unknown. The midinfrared wavelengths of 7.5 to 14 µm are particularly important for radiative heat transfer in the ambient environment, because of the overlap with the atmospheric transmission window. For instance, a high midinfrared emissivity can facilitate surface cooling, whereas a low midinfrared emissivity can minimize heat loss to surroundings. Here we find that the midinfrared emissivity of butterfly wings from warmer climates such as Archaeoprepona demophoon (Oaxaca, Mexico) and Heliconius sara (Pichincha, Ecuador) is up to 2 times higher than that of butterfly wings from cooler climates such as Celastrina echo (Colorado) and Limenitis arthemis (Florida), using Fourier-transform infrared (FTIR) spectroscopy and infrared thermography. Our optical computations using a unit cell approach reproduce the spectroscopy data and explain how periodic microstructures play a critical role in the midinfrared. The emissivity spectrum governs the temperature of butterfly wings, and we demonstrate that C. echo wings heat up to 8 °C more than A. demophoon wings under the same sunlight in the clear sky of Irvine, CA. Furthermore, our thermal computations show that butterfly wings in their respective habitats can maintain a moderate temperature range through a balance of solar absorption and infrared emission. These findings suggest that the surface microstructures of butterfly wings potentially contribute to thermoregulation and provide an insight into butterflies' survival.

FTIR analysis and evaluation of carcinogenic and mutagenic risks of nitro-polycyclic aromatic hydrocarbons in PM1.0.

Nitro-polycyclic aromatic hydrocarbons (NPAHs) represent a group of organic compounds of significant interest due to their presence in airborne particulates of urban centers, wide distribution in the environment, and mutagenic and carcinogenic properties. These compounds, associated with atmospheric particles of size < 1 µm, have been reported as a major risk to human health. This study aims at identifying the spectral features of NPAHs (1-nitropyrene, 2-nitrofluorene, and 6-nitrochrysene) in emissivity and transmittance spectra of samples of particulate matter < 1 µm (PM1.0) using infrared spectrometry. Carcinogenic and mutagenic risks of the studied NPAHs associated with PM1.0 samples were also determined for two sampling sites: Canoas and Sapucaia do Sul. The results showed that NPAH standard spectra can effectively identify NPAHs in PM1.0 samples. The transmittance and emissivity sample spectra showed broader bands and lower relative intensity than the standard NPAH spectra. The carcinogenic risk and the total mutagenic risk were calculated using the toxic equivalent factors and mutagenic potency factors, respectively. Canoas showed the highest total carcinogenic risk, while Sapucaia do Sul had the highest mutagenic risk. The seasonal analysis suggested that in the study area the ambient air is more toxic during the cold periods. These findings might of significant importance for the decision and policy making authorities.

Infrared thermal image for assessing animal health and welfare / Imagem termográfica infravermelha na avaliação do bem-estar animal

Infrared thermal imaging is a non-destructive testing technology that can be used to determine the superficial temperature of objects. This technology has an increasing use in detecting diseases and distress in animal husbandry within the poultry, pig and dairy production. The process can identify changes in peripheral blood flow from the resulting changes in heat loss and; therefore, have been a useful tool for evaluating the presence of disease, edema, and stress in animals. This paper reviews the current literature related to the use of infrared technology and discusses their results and implications in animal welfare issues, poultry, pig and bovine industry.(AU)

Imagem térmica infravermelha é uma tecnologia experimental não destrutiva, que pode ser utilizado para determinar a temperatura superficial dos objetos. Esta tecnologia tem uma crescente aplicação na detecção de doenças e estresse em criação de animais: aves, suínos e produção de leite. Este processo pode detectar mudanças no fluxo de sangue periférico das alterações resultantes na perda de calor e, portanto, têm sido ferramenta útil para avaliar a presença de doença, edema e estresse nos animais. Este trabalho revisa a literatura atual em relação ao uso da tecnologia de infravermelho e discute seus resultados e implicações em questões de bem-estar animal, e na indústria de produção de aves, suínos e bovinos.(AU)

Infrared thermal image for assessing animal health and welfare / Imagem termográfica infravermelha na avaliação do bem-estar animal

Infrared thermal imaging is a non-destructive testing technology that can be used to determine the superficial temperature of objects. This technology has an increasing use in detecting diseases and distress in animal husbandry within the poultry, pig and dairy production. The process can identify changes in peripheral blood flow from the resulting changes in heat loss and; therefore, have been a useful tool for evaluating the presence of disease, edema, and stress in animals. This paper reviews the current literature related to the use of infrared technology and discusses their results and implications in animal welfare issues, poultry, pig and bovine industry.

Imagem térmica infravermelha é uma tecnologia experimental não destrutiva, que pode ser utilizado para determinar a temperatura superficial dos objetos. Esta tecnologia tem uma crescente aplicação na detecção de doenças e estresse em criação de animais: aves, suínos e produção de leite. Este processo pode detectar mudanças no fluxo de sangue periférico das alterações resultantes na perda de calor e, portanto, têm sido ferramenta útil para avaliar a presença de doença, edema e estresse nos animais. Este trabalho revisa a literatura atual em relação ao uso da tecnologia de infravermelho e discute seus resultados e implicações em questões de bem-estar animal, e na indústria de produção de aves, suínos e bovinos.