Effect of psyllium husk powder on the gelation behavior, microstructure, and intermolecular interactions in myofibrillar protein gels from Andrias davidianus.

The interaction between proteins and soluble dietary fibers plays a vital role in the development of animal-derived foods. Herein, the effects of different contents (0-3.0%) of round-bracted psyllium husk powder (PHP) on the gelation behavior, microstructure, and intermolecular interactions of Andrias davidianus myofibrillar protein (MP) were investigated. Rheological and chemical forces suggested that PHP (1.5%-2.0%) enhanced the functional properties of MP at low ionic strength, thereby increasing the viscoelasticity of mixed gels. SDS-PAGE revealed that PHP reinforced the cross-linking and aggregation of protein molecules. Circular dichroism spectroscopy, low-field nuclear magnetic resonance, and scanning electron microscopy demonstrated that PHP induced the transformation of α-helix (decreased by 14.85%) to an ordered ß-sheet structure (increased by 81.58%), which was more favorable for the formation of dense network structure and improved (10.53%) the water retention of MP gels. This study provided new insights for PHP to effectively meliorate the heat-induced gelling properties of MP.

Development of Oleogel-Based Fat Replacer and Its Application in Pan Bread Making.

In recent years, the bakery industry has been exploring alternative fats to replace traditional solid fats. Shortening, a common baking ingredient, is produced through the hydrogenation of vegetable oils, resulting in high levels of saturated and trans fatty acids, despite its vegetable oil origin. The excessive consumption of these fats has been associated with negative health effects, including dyslipidemia and cardiovascular issues. Oleogels, incorporating hydroxypropyl methylcellulose (HPMC), xanthan gum (XG), and olive oil, were utilized to replace shortening in the production of white pan bread. The substitution of shortening with oleogel in the white pan bread preparation demonstrated potential reductions in saturated fat, trans fat, and the ratio of saturated fat to unsaturated fatty acids. Specifically, with the complete substitution of shortening with oleogel, saturated fatty acids decreased by 52.46% and trans fatty acids by 75.72%, with unsaturated fatty acids increasing by 57.18%. Our findings revealed no significant difference in volume between bread made with shortening and bread with up to 50% shortening substitution. Moreover, when compared to bread made with shortening and 50% oleogel substitution, no adverse effects on the quality characteristics of volume and expansion properties were observed, and the retrogradation rate was delayed. This study suggests that incorporating oleogels, formed with hydrocolloids such as HPMC and XG, to replace shortening in bread, in conjunction with traditional solid fats, provides positive effects on the quality and nutritional aspects of the bread compared to using oleogel alone. Through this study, we demonstrate the use of oleogels as a healthier alternative to shortening, without reducing the bread's quality, thus offering a practical solution to reduce unhealthy fats in bakery products.

Development of hen egg-based protein beverages with high nutritional value.

Physical stability is a prerequisite for any emulsion-based beverage. This study aimed to optimize beverage emulsion (BE) rich in whole egg, whey protein isolate (WPI), and soyabean oil in the presence of polygalactose derivative as adsorbing hydrocolloids (AH) and partially hydrolyzed starch as non-adsorbing hydrocolloids (NAH). All formulations were optimized for stability, particle size, polydispersity index (PDI), and zeta potential (ζ). A central composite design was applied to investigate the impact of WPI concentration, hydrocolloid concentration, oil volume, and pH as independent factors on particle size, PDI, and ζ of emulsions. The optimum conditions were met upon formulating BE with 1 whole egg, 9.28 g WPI, 11.24 g AH, 5.58 mL oil at pH 7. Two optimal formulations were obtained for BE stabilized with NAH at pH 3 and 7, at which droplets had the highest electrical charge. Noting that, less amount of NAH (7.5 g) was required at pH 3 than at pH 7 (13.56 g). Oil content (3 mL) and WPI concentration (16 g) for both NAH formulations were similar. The size, polydispersity index (PDI), and zeta potential of AH-stabilized emulsion were 762 nm, 0.69, and - 32.05 mV, respectively, while for NAH emulsion, they were 150.02 nm, 0.40, and - 28.53 mV at pH 7; and 248.39 nm, 0.41, and 27.1 mV at pH 3, respectively. No conspicuous gravitational separation was observed after 20 days of storage at 4 °C. Hence, both hydrocolloids are appropriate to stabilize protein-enriched BE at neutral pH; however, physical stability was also achieved at acidic pH for NAH-stabilized emulsions.

Texture improvement and in vitro digestion modulation of plant-based fish cake analogue by incorporating hydrocolloid blends.

Hydrocolloids have proven effective in improving the texture of surimi gels, yet their application in plant-based seafood analogues remains underexplored. This study aimed to develop a hydrocolloid blend comprising methylcellulose (MC), curdlan gum (CG), and high-acyl gellan gum (GG) to achieve a surimi-like texture in plant-based fish cakes (PBFC) made from brown rice and pea protein isolates. The research showcased that higher MC concentration boosted protein powder's heated oil holding capacity, while CG concentration increments lowered it. However, heated water holding capacity remained stable despite changes in MC and GG levels. Incorporating hydrocolloids elevated PBFC moisture content, decreasing expressible moisture and oil amounts with rising MC, CG and GG concentrations. PBFC hardness increased with higher hydrocolloid levels and was influenced by temperature, while springiness remained unaffected. GG helped maintain storage modulus (G') during PBFC cooling at higher concentrations, whereas the opposite effect was observed for MC. Analytically, higher MC concentrations reduced protein digestibility, while increased GG concentrations appeared to enhance it. Microstructural analysis corroborated these findings, with more protein aggregates in PBFC containing 3.8% MC and fewer in PBFCs with 6% CG and 3% GG. Consumer evaluations indicated that PBFC formulated with 1% MC, 3% CG, and 1.5% GG matched the springiness of commercial surimi-tofu fish cake, though it received slightly lower overall liking scores. In conclusion, the combined use of these three hydrocolloids demonstrated the potential to enhance the physical properties of PBFC and modify protein digestibility, offering insights into the development of innovative plant-based seafood analogues.

Crystalline nanoxylan from hot water extracted wood xylan at multi-length scale: Molecular assembly from nanocluster hydrocolloids to submicron spheroids.

As a contribution to expand accessibility in the territory of bio-based nanomaterials, we demonstrate a novel material strategy to convert amorphous xylan preserved in wood biomass to hierarchical assemblies of crystalline nanoxylan on a multi-length scale. By reducing the end group in pressurized hot water extracted (PHWE) xylan to primary alcohol as a xylitol form with borohydride reduction, the endwise-peeling depolymerization is effectively impeded in the alkali-catalyzed hydrolytic cleavage of side substitutions in xylan. Nanoprecipitation by a gradual pH decrease resulted in a stable hydrocolloid dispersion in the form of worm-like nanoclusters assembled with primary crystallites, owing to the self-assembly of debranched xylan driven by strong intra- and inter-chain H-bonds. With evaporation-induced self-assembly, we can further construct the hydrocolloids as dry submicron spheroids of crystalline nanoxylan (CNX) with a high average elastic modulus of 47-83 GPa. Taking the advantage that the chain length and homogeneity of PHWE-xylan can be tailored, a structure-performance correlation was established between the structural order in CNX and the phosphorescent emission of this crystalline biopolymer. Rigid clusterization and high crystallinity that are constructed by strong intra- and inter-molecule interactions within the nanoxylan effectively restrict the molecular motion, thereby promoting the emission of ultralong organic phosphorescence.

Design of colloid structure to realize gel salt reduction: a review.

Excessive consumption of salt is associated with increased incidence of cardiovascular diseases, hypertension, diabetes, and other health issues. However, it is challenging to find appropriate strategies that balance sensory qualities while achieving sodium reduction as salt plays a crucial role in providing desired appearance, texture, and taste. The impact of hydrocolloid properties (addition and type) on saltiness perception were reviewed. Additionally, considering the interactions between food components, both covalent and noncovalent, we propose designing specialized colloidal structures capable of binding sodium ions to enhance salt-taste perception. The effects of hydrocolloids on the physicochemical, structural, and sensory qualities of gel foods are then discussed. Finally, by addressing current issues with low-salt foods and consumer demands, we provide a future outlook for low-salt food development. The selection of suitable hydrocolloids and precise control of the addition are crucial considerations for achieving salt reduction. The interaction between hydrocolloids and other food components can be utilized to design specialized colloidal structures, thereby accomplishing gel-based salt reduction and enhancing properties. This review serves as a theoretical reference for developing healthy, nutritious, and flavorful low-salt foods that can aid in the prevention and mitigation of diseases associated with excessive salt consumption.

Evaluación de galletas a base de harina de quinua(Chenopodium quinoa) y maíz (Zea mays) empleandodiferentes hidrocoloides / Evaluation of quinoa (Chenopodium quinoa) and corn (Zea mays) flour-basedcookies using different hydrocolloids

Introducción: La quinua (Chenopodium quinoa), es un pseudocereal andino, el maíz (Zea mays L.) es uno de los principales cultivos del mundo, en la antigüedad se empleaba para la alimentación de las personas de sectores rurales y para dieta animal, ambos cereales tienes las propiedades para poder ser industrializados en el área de repostería como es el caso de las galletas Objetivo: Evaluar las formulaciones de galletas a base de harina de quinua (chenopodium quinoa) y maíz (zea mays) empleando diferentes hidrocoloides Materiales y métodos: Para la elaboración de las galletas se empleó un Diseños Completamente al Azar (D.C.A), con modelo factorial AxB, donde Factor A= Tipo de harina (quinua y maíz), Factor B= Hidrocoloides Resultados: La concentración del 60 % harina de quinua + harina de maíz 40 % + goma xantana, situó los mejores valores para las características fisicoquímicas. Sin embargo, el T5= 40 % harina de quinua + harina de maíz 60 % + goma xantana, obtuvo la mejor valoración en los perfiles sensoriales (color, textura, sabor y aceptabilidad), en cuanto a los análisis microbiológicos no se encontró presencia de E. coli, levaduras y mohosConclusión: En cuanto los resultados fisicoquímicos, se demostró que los tratamientos presentaron una humedad dentro de límites permisibles por la Norma Técnica Ecuatoriana INEN 2 085:2005. Galletas, Requisitos. Por su parte, el T2 resalto en el contenido de proteína (8.12 %) y carbohidratos (64.46 %). El T5 obtuvo mejores atributos sensoriales, Así mismo el análisis microbiológico presentó ausencia en E. coli, levaduras y mohos.(AU)

Introduction: Quinoa is a pseudocereal of high nutritionalvalue, rich in proteins, lipids, fiber, vitamins and gluten-free.On the other hand, corn is a cereal that is characterized by itshigh production and commercialization. In ancient times, it was used to feed people in rural areas and for animal feed. Itis important to point out that both cereals have the propertiesand characteristics to be used as raw material in the elabora-tion of food products.Objective: To evaluate the physicochemical and sensorycharacteristics of quinoa (C. quinoa) and corn (Z mays) flour-based cookies using different hydrocolloids.Materials and methods: For the production of the cook-ies, a completely randomized design (CRD) was used with anA*B factorial model, where factor A = quinoa flour/corn flourratio and factor B = hydrocolloids.Results: The concentration of 60% quinoa flour + 40%corn flour + xanthan gum gave the best values for the physic-ochemical characteristics. However, T5, which corresponds to40% quinoa flour + 60% corn flour + xanthan gum, obtainedthe best evaluation in the sensory profiles (color, texture, fla-vor and acceptability). In terms of microbiological analysis, noE. coli, yeasts or molds were found. For this reason, the safetyof the raw material and the final product is guaranteed.Conclusion: As for the physicochemical analyses, thetreatments presented a moisture content within the limits es-tablished by the Ecuadorian Technical Standard INEN 2085,requirements for cookies. Therefore, it is concluded that byincluding 60% quinoa flour + 40% corn flour + xanthan gum,the protein (8.12%) and carbohydrate (64.46%) content in-creased considerably. While the use of 40% quinoa flour +60% corn flour + xanthan gum allowed intensifying the sen-sory attributes, obtaining the best results. In addition, it wasdetermined that the raw material and final product is innocu-ous and free of microorganisms, being suitable for human consumption.(AU)

Novel hydrocolloids synthesized by polyphenols grafted onto chitosan: A promising coating to inhibit PhIP formation during pan-frying of golden pompano fillets.

Hydrocolloids synthesized by gallic acid (GA) and ferulic acid (FA) grafting onto chitosan (CS) were characterized, and their effects on PhIP formation in pan-fried golden pompano were investigated. Spectrograms including nuclear magnetic resonance, Fourier transform infrared spectroscopy and ultraviolet-visible confirmed that GA and FA were successfully grafted onto CS via covalent bonds, with grafting degree of 97.06 ± 2.56 mg GA/g and 93.56 ± 2.76 mg FA/g, respectively. The CS-g-GA and CS-g-FA exerted better solubility and antioxidant activities than CS. For the 8-min pan-fried golden pompano fillets, CS-g-GA and CS-g-FA (0.5 %, m/v) significantly reduced the PhIP formation by 61.71 % and 81.64 %, respectively. Chemical models revealed that CS-g-GA and CS-g-FA inhibited PhIP formation mainly by decreasing the phenylacetaldehyde contents from Maillard reaction and competing with creatinine to react with phenylacetaldehyde. Therefore, it was suggested that CS-g-phenolic acids emerge as novel coating for aquatic products during processing and inhibit heterocyclic amines generation.

Three-Dimensional Printing of Red Algae Biopolymers: Effect of Locust Bean Gum on Rheology and Processability.

Seaweeds, rich in high-value polysaccharides with thickening/gelling properties (e.g., agar, carrageenan, and alginate), are extensively used in the food industry for texture customization and enhancement. However, conventional extraction methods for these hydrocolloids often involve potentially hazardous chemicals and long extraction times. In this study, three red seaweed species (Chondrus crispus, Gelidium Corneum, and Gracilaria gracilis) commercialized as food ingredients by local companies were chosen for their native gelling biopolymers, which were extracted using water-based methodologies (i.e., (1) hydration at room temperature; (2) stirring at 90 °C; and (3) centrifugation at 40 °C) for production of sustainable food gels. The potential use of these extracts as bioinks was assessed employing an extrusion-based 3D printer. The present work aimed to study the gelation process, taken place during printing, and assess the effectiveness of the selected green extraction method in producing gels. To improve the definition of the printed gel, two critical printing parameters were investigated: the addition of locust bean gum (LBG) at different concentrations (0, 0.5, 1, 1.5, 2, and 2.5%) and printing temperature (30, 40, 60, and 80 °C). Rheological results from a controlled-stress rheometer indicated that gels derived from G. corneum and G. gracilis exhibited a lower gel strength (lower G' and G″) and excessive material spreading during deposition (lower viscosity) than C. crispus. Thus, G' was around 5 and 70 times higher for C. crispus gels than for G. corneum and G. gracilis, respectively. When increasing LBG concentration (0.5 to 2.5% w/w) and lowering the printing temperature (80 to 30 °C), an enhanced gel matrix definition for G. corneum and G. gracilis gels was found. In contrast, gels from C. crispus demonstrated greater stability and were less influenced by these parameters, showcasing the potential of the seaweed to develop sustainable clean label food gels. Eventually, these results highlight the feasibility of using algal-based extracts obtained through a green procedure as bioinks where LBG was employed as a synergic ingredient.

In sight the behavior of natural Bletilla striata polysaccharide hydrocolloids by molecular dynamics method.

Plant polysaccharides, distinguished by diverse glycosidic bonds and various cyclic sugar units, constitute a subclass of primary metabolites ubiquitously found in nature. Contrary to common understanding, plant polysaccharides typically form hydrocolloids upon dissolution in water, even though both excessively high and low temperatures impede this process. Bletilla striata polysaccharides (BSP), chosen for this kinetic study due to their regular repeating units, help elucidate the relationship between polysaccharide gelation and temperature. It is suggested that elevated temperatures enhance the mobility of BSP molecular chains, resulting in a notable acceleration of hydrogen bond breakage between BSP and water molecules and consequently, compromising the conformational stability of BSPs to some extent. This study unveils the unique relationship between polysaccharide dissolution processes and temperature from a kinetics perspective. Consequently, the conclusion provides a dynamical basis for comprehending the extraction and preparation of natural plant polysaccharide hydrocolloids, pharmaceuticals and related fields.

Effects of hydrocolloids and oleogel on techno-functional properties of dairy foods.

This paper aims to overview the influence of different gels that including hydrocolloids and oleogel on techno-functional changes of dairy foods. The hydrocolloids are widely added to dairy products as stabilizers, emulsifiers, and gelling agents to enhance their texture, or improve sensory properties to meet consumer needs; and the newly developed oleogel, which despite less discussed in dairy foods, this article lists its application in different dairy products. The properties of different hydrocolloids were explained in detail, meanwhile, some common hydrocolloids such as pectin, sodium alginate, carrageenan along with the interaction between gel and proteins on techno-functional properties of dairy products were mainly discussed. What's more, the composition of oleogel and its influence on dairy foods were briefly summarized. The key issues have been revealed that the use of both hydrocolloids and oleogel has great potential to be the future trend to improve the quality of dairy foods effectively.

Scope and challenges of seaweed utilization in food and nutraceutical industry in India: a review.

Seaweeds are an excellent source of unique antioxidant phytochemicals, dietary fibres, essential amino acids, vitamins, polyunsaturated fatty acids and minerals. The presence of such structurally diverse and high value bioactive compounds has led to popularization of seaweed as functional food ingredient in global health supplement market. India, with a long coastline of 8100 km and exclusive economic zone of 2.17 million km2, is rich in diverse seaweed resources belonging to almost 700 species. However, food and nutraceutical application of Indian seaweed is highly constrained. Apart from Kappaphycus alvarezii, there is no systematic commercial cultivation of seaweed in India. The regulatory framework for use of seaweed as food is still developing and consumer acceptance is still low. However, there is a timely and renewed interest from different government agencies and research organisations to develop a thriving food and nutraceutical industry using India's vast seaweed resources. The review briefly describes the nutritional and functional food potential of the seaweed and goes on to discuss the scope of seaweed utilization in food and nutraceutical industry in India. Further, the review has identified the regulatory challenges and quality control requirements for use of seaweeds in food and nutraceuticals.

Xanthan gum and pectin as beverage stabilizers reduce the digestive enzyme hydrolysis of antioxidant and antihypertensive peptides obtained from a brewery byproduct.

An acidic beverage was formulated with xanthan gum (XG), pectin (P) and brewer spent grain (BSG) peptides with antioxidant and antihypertensive properties. The impact of hydrocolloids levels on peptide bioaccessibility was studied. Peptides were obtained from BSG using Purazyme and Flavourzyme enzymes. BSG peptides were fractionated by ultrafiltration (UF) and four fractions were obtained: F1 (>10 kDa), F2 (10-5 kDa), F3 (1-5 kDa), and F4 (<1 kDa). F3 showed the highest protein purity, ferulic acid content, proportion of amphipathic peptides, and bioactive properties (ABTS+ radical scavenging and ACE-I inhibitory activity). The identified peptides from F3 by tandem mass spectrometry were 138. In silico analysis showed that 26 identified peptides had ABTS+ inhibitory activity, while 59 ones presented good antihypertensive properties. The effect of XG and P levels on bioaccessibility of F3 peptides in the formulated beverages was studied by a central composite experimental design. It was observed that F3 peptides interacted with hydrocolloids by electrostatic forces at pH of formulated beverages. The addition of hydrocolloids to formulation modulated the release of the antioxidant peptides and protected the degradation of ACE-I inhibitory peptides from F3 during simulated gastrointestinal digestion. Finally, the level of hydrocolloids that produced intermediate viscosities in the formulated beverages improved the bioaccessibility of the F3 peptides.

Recent Approaches to the Formulation, Uses, and Impact of Edible Coatings on Fresh Peach Fruit.

Peaches are among the most well-known fruits in the world due to their appealing taste and high nutritional value. Peach fruit, on the other hand, has a variety of postharvest quality issues like chilling injury symptoms, internal breakdown, weight loss, decay, shriveling, and over-ripeness, which makes a challenging environment for industries and researchers to develop sophisticated strategies for fruit quality preservation and extending shelf life. All over the world, consumers prefer excellent-quality, high-nutritional-value, and long-lasting fresh fruits that are free of chemicals. An eco-friendly solution to this issue is the coating and filming of fresh produce with natural edible materials. The edible coating utilization eliminates the adulteration risk, presents fruit hygienically, and improves aesthetics. Coatings are used in a way that combines food chemistry and preservation technology. This review, therefore, examines a variety of natural coatings (proteins, lipids, polysaccharides, and composite) and their effects on the quality aspects of fresh peach fruit, as well as their advantages and mode of action. From this useful information, the processors could benefit in choosing the suitable edible coating material for a variety of fresh peach fruits and their application on a commercial scale. In addition, prospects of the application of natural coatings on peach fruit and gaps observed in the literature are identified.

Red seaweed biorefinery: The influence of sequential extractions on the functional properties of extracted agars and porphyrans.

Red seaweeds are exploited for their hydrocolloids, but other fractions are usually overlooked. In a novel approach, this study aimed to evaluate cold-water (CWE), ethanolic (EE), and alkaline (SE) extractions, alone and in sequence, to simultaneously: i) decrease the hydrocolloid extraction waste (valorizing bioactive side-streams and/or increasing extraction yield); and ii) increase the hydrocolloids' texturizing properties. It is the first time these extractions' synergetic and/or antagonistic effects will be accessed. For Porphyra dioica, a combination of CWE and EE was optimal: a positive influence on the melting temperature (increasing 5 °C to 74 °C) and sulphate content (a 3-fold reduction to 5 %) was observed, compared to a direct porphyran extraction. The same was observed for Gracilaria vermiculophyla, recovering two additional bioactive fractions without impacting the hydrocolloid's extraction (agar with 220 g/cm2 gelling strength and 14 % yield was obtained). The sequential use of CWE, EE, and SE was the most beneficial in Gelidium corneum processing: it enhanced agar's texturizing capacity (reaching 1150 g/cm2, a 1.5-fold increase when compared to a direct extraction), without affecting its 22 % yield or over 88 % purity. Ultimately, these findings clarified the effects of cascading biorefinery approaches from red seaweeds and their pertinence.

Study of molecular interaction and texture characteristics of hydrocolloid-mixed alginate microspheres: As a shell to encapsulate multiphase oil cores.

This work investigates the molecular interaction of hydrocolloids (xanthan gum (XG), hydroxyethyl cellulose (HEC), carbomer (CBM) and hymagic™-4D (HA)) with sodium alginate (SA) in microspheres in detail. The molecular interaction of hydrocolloids with SA are demonstrated by the rheological property analysis of the mixed solutions as well as the morphology structure and texture characteristics studies of the microspheres. It is found that the hydrocolloids (XG, HEC and CBM) with branches or capable to coil are able to form complex networks with SA through molecular interactions which hinders the free diffusion of calcium ions and changes the texture characteristics of microspheres. In addition, the mixed solutions (SA-XG and SA-HEC) with complex networks and do not have a chelating effect on calcium ions are used to form the shell of the microcapsules through droplet microfluidic technology, and stable with soft microcapsules encapsulating multiphase oil cores have been successfully prepared. At the same time, the textural properties of microcapsules are quantized, which are related to human sensory properties. The developed stable and soft microcapsules which have the properties of sensory comfort are expected to be applied in the personal care industry and a variety of fields.

Oleo-foams and emulsion-foams as lipid-based foam systems: a review of their formulation, characterization, and applications.

Lipid-based foam systems (LBFs) have grown in popularity recently because of their effectiveness and potential uses. As a result, in order to stabilize them, considerable work has been put into developing more biodegradable and environmentally friendly materials. However, the use of natural stabilizing agents has been constrained due to a lack of thorough knowledge of them. This review offers insightful data that will encourage more studies into the development and use of LBFs. Emulsifiers or gelling agents, as well as new preparation and characterization methods, can be used to increase or prolong the functional performance of LBFs. Special emphasis has been given on the connections between their structures and properties and expanding the range of industries in which they can be applied. In conclusion, it is crucial to gain a deeper understanding of the preparation mechanisms and influencing factors in order to improve the quality of foam products and create novel LBFs.

Comparative studies on the rheological characteristics, functional attributes, and baking stability of xanthan and guar gum formulated honey gel matrix.

The research aims to enhance the characteristics of honey by incorporating xanthan gum (XG) and guar gum (GG) at various concentrations (0.5-2.0% w/w) and preparing a honey gel matrix (HGM) through high-shear homogenization. This approach serves as a substitute for fat-based filling materials commonly used in bakery products. The study encompassed an investigation of the rheological characteristics (steady and dynamic), total phenolic content (TPC), antioxidant activity, and baking stability of the HGMs. The concentration of the gums used significantly influenced the transformation of honey into the HGM and its stability. Notably, the XG-HGM demonstrated greater shear thinning behavior and higher consistency compared to the GG-HGM. Herschel Bulkley and power law models were found to be the best-fitted models for XG-HGM and GG-HGM, respectively. Furthermore, both XG-HGM and GG-HGM exhibited a higher viscous component (G″) than an elastic component (G') at low concentrations, up to 1% (w/w) for XG-HGM and 1.5% (w/w) for GG-HGM; however, this behavior reversed beyond those concentrations (G' > G″). The XG-HGM exhibited lower temperature sensitivity compared to GG-HGM, indicating better stability under varying heat conditions. Moreover, both TPC and antioxidant activity decreased with increasing concentrations of both gums. The XG-HGM achieved the highest baking stability index, reaching 95.23% at a 2% concentration. This modified HGM formulated with XG demonstrated superior consistency, color retention, and exceptional baking stability, making it a promising candidate for application as a filling material in the bakery sector. Its improved stability and quality can facilitate the development of a wide range of baking products in the food industry.

The influence of different gums compared with surfactants as encapsulating stabilizers on the thermal, storage, and low-pH stability of chlorophyllin.

Sodium copper chlorophyllin (SCC), with a higher stability and water solubility than chlorophyll, has limited applications in acidic products due to precipitation. We investigated the effect of pectin (PE), carboxymethyl cellulose (CMC), xanthan gum (XG), carrageenan gum (CG), gellan gum (GG), tragacanth gum (TG), gum Arabic (GA), and polysorbate 80 (PS80) on SCC stability in acidic model solutions (pH = 3.5). These stabilizers led to a significant reduction in particle size and zeta-potential compared to control sample. GA (33.3:1), PE (8:1), CMC (4:1), XG (1.33:1), and PS80 (0.67:1) stabilized SCC in acidic systems for 28 days. The FTIR analysis showed that mainly electrostatic and hydrogen bonds between SCC and stabilizers led to a substantial decline in particle size, improving SCC distribution and stability within acidic environment. Thus, XG and CMC could be effectively used for SCC stabilization under acidic solutions where applying PS80 surfactant is a health concern.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels).

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.