Influence of 3-chloropropyl) triethoxysilane and pH on the properties of modified guar gum film.

Guar gum (GG) as a polymer biopolymer is widely used in the field of bio-based packaging. However, its poor mechanical properties, barrier properties and high viscosity greatly hinder its use as an effective packaging material. Therefore, this study introduced CPTES to improve the mechanical (16.58-27.39 MPa) and tensile properties (26.80 %-30.67 %). The FTIR and XRD results indicated a strong interaction between the biofilm fractions modified by CPTES, CPTES bound to the hydroxyl groups on GG and formed a dense polysiloxane network through adsorption and grafting. OM and AFM reflect a denser and flatter film structure on the surface of the G30 film, which has the best film formation. Based on this, the pH of the solution was further adjusted to reach an alkaline environment, disrupting the intermolecular binding through electrostatic repulsion. The rheological behavior indicates that the viscosity and viscoelasticity of film solution gradually decrease with the increase in pH. OM and AFM results show that the G30/8 film has the best compact properties, while the nonporous compact film structure further improves the mechanical, barrierand and thermodynamic properties of the film. Accordingly, the findings of this study had a certain value for regulating the low viscoelasticity of GG emulsion and enhancing the stability of film formation.

ß(1,3) ß(1,6) glucogalactan from Rhizopus microsporus var. oligosporus: extraction, characterization, antioxidant and α-amylase inhibitory activities.

In this study, the Box-Behnken experimental planning was used to optimize the extraction of polysaccharides from the cell wall of Rhizopus microspore var. oligosporus, with analysis of the quantitative effects of parameters pH, temperature and extraction time for polysaccharide yield. The optimal conditions for extraction were determined by the regression equation and evaluation of the response surface graphs, which indicated: pH 13, temperature of 120ºC and time of 60 min, with maximum yield around 18.5%. Fourier transform infrared spectroscopy analysis indicated typical polysaccharide signals. Nuclear magnetic resonance spectroscopy and monosaccharide analysis indicated a ß(1,3) ß(1,6) glucogalactan. The polysaccharide exhibited an average molecular weight of 120 kDa and a polymerization degree of 741. Antioxidant assays in vitro revealed the potential of polysaccharide in elimination of ABTS+ radical and hydroxyl radicals. EC50 values for free radical elimination were 7.69 and 17.8 mg/mL, for ABTS+ and hydroxyls, respectively. The polysaccharides showed potential for α-amylase inhibition with an EC50 of 1.66 mg/mL. The results suggest that ß(1,3) ß(1,6) glucogalactan from Rhizopus microsporus var. oligosporus can be used in biotechnological applications.

Optimized production and characterization of endo-ß-mannanase by Aspergillus niger for generation of prebiotic mannooligosaccharides from guar gum.

Optimized production of Aspergillus niger ATCC 26011 endo-ß-mannanase (ManAn) on copra meal resulted in 2.46-fold increase (10,028 U/gds). Purified ManAn (47 kDa) showed high affinity towards guar gum (GG) as compared to konjac gum and locust bean gum with Km 2.67, 3.25 and 4.07 mg/mL, respectively. ManAn efficiently hydrolyzed GG and liberated mannooligosaccharides (MOS). Changes occurring in the rheological and compositional aspects of GG studied using Differential scanning calorimetry (DSC), Thermal gravimetric analysis (TGA) and X-ray diffraction (XRD) revealed increased thermal stability and crystallinity of the partially hydrolyzed guar gum (PHGG). Parametric optimization of the time and temperature dependent hydrolysis of GG (1% w/v) with 100 U/mL of ManAn at 60 °C and pH: 5.0 resulted in 12.126 mg/mL of mannotetraose (M4) in 5 min. Enhanced growth of probiotics Lactobacilli and production of short chain fatty acids (SCFA) that inhibited enteropathogens, confirmed the prebiotic potential of PHGG and M4.

Synergistic effect of gellan gum and guar gum on improving the foaming properties of soy protein isolate-based complexes: Interaction mechanism and interfacial behavior.

Interactions among multi-component play a critical role in modulating the foaming properties of aerated foods. This study evaluated the mechanisms of synergistic improvement of gellan gum (GEG) and guar gum (GUG) on the foaming properties of soy protein isolate (SPI)-based complex. The results showed that the GEG/GUG ratio was closely related to the intermolecular interactions of SPI-based ternary complex and the dynamical changing of its foaming properties. The SPI/GEG/GUG ternary complex with a GEG/GUG ratio of 2/3 exhibited the highest foamability (195 %) and comparable foam stability (99.17 %), which were 32.95 % and 2.99 % higher than that of SPI/GEG binary complex. At this ratio, GUG promoted the interactions between SPI and GEG, and bound to complex's surface through hydrogen bonding, resulting in the increase of particle size and surface charge, and the decrease of surface hydrophobicity. Although this reduced the diffusion of complex onto the air/water interface, it increased permeation rate and molecular rearrangement behavior, which were the potential mechanisms to improve the foaming properties. Additionally, the synergistic effect of GEG and GUG also enhanced the elastic strength and solid characteristics of foam systems. This study provided a theoretical guidance for the targeted modulation of foaming properties of multi-component aerated foods.

The study of galactomannans with different molecular weights and their ability to form microparticles suitable for pulmonary delivery.

The influence of locust bean gum (LBG) galactomannans (GMs) molecular weight (Mw) to assemble microparticulate systems was evaluated, and carriers for deep lung delivery were developed. A commercial batch of LBG with a mannose/galactose (M/G) ratio of 2.4 (batch 1) was used to study the influence of different microwave partial acid hydrolysis conditions on carbohydrate composition, glycosidic linkages, and aqueous solutions viscosity. The microwave treatment did not affect the composition, presenting 4-Man (36-42 %), 4,6-Man (27-35 %), and T-Gal (24-25 %) as the main glycosidic linkages. Depolymerization led to a viscosity reduction (≤0.005 Pa·s) with no major impact on polysaccharide debranching. The structural composition of the LBG galactomannans were further elucidated with sequence-specific proteins using carbohydrate microarray technologies. A second batch of LBG (M/G 3.3) was used to study the impact of GMs with different Mw on microparticle assembling, characteristics, and insulin release kinetics. The low-Mw GMs microparticles led to a faster release (20 min) than the higher-Mw (40 min) ones, impacting the release kinetics. All microparticles exhibited a safety profile to cells of the respiratory tract. However, only the higher-Mw GMs allowed the assembly of microparticles with sizes suitable for this type of administration.

Shellac and locust bean gum coacervated curcumin, epigallocatechin gallate nanoparticle ameliorates diabetic nephropathy in a streptozotocin-induced mouse model.

Curcumin and epigallocatechin gallate have the disadvantage of low aqueous solubility and first-pass metabolism, resulting in limited bioavailability. This work aimed to enhance oral bioavailability by forming gastric pH-stable shellac nanoparticles containing curcumin and epigallocatechin gallate using locust bean gum by anti-solvent precipitation (CESL-NP). The nanoparticles were characterized by their particle size, morphology, zeta potential, gastric pH stability, release profile, drug loading, and entrapment efficiency. The findings showed that a network of hydrolyzed shellac, locust bean gum, curcumin, and epigallocatechin gallate successfully entrapped individual particles inside a complex system. The morphological investigation of the CESL-NP formulation using FESEM, TEM, and AFM revealed the presence of spherical particles. FTIR, DSC, and XRD analysis revealed that curcumin and epigallocatechin gallate were amorphous due to their bond interactions with the matrix. Streptozotocin-treated mice, upon treatment with CESL-NP, showed kidney and pancreatic improvements with normalized kidney hypertrophy index and histopathology, maintained biochemical parameters, increased beta cell count, and a 38.68-fold higher blood glucose level inhibition were observed when compared to free-(CUR + EGCG). This research affirms that the shellac-locust bean gum complex shows potential for the sustained oral delivery of curcumin and epigallocatechin gallate, specifically for treating diabetic nephropathy.

Synthesis and characterization of amino-functionalized guar gum based polyurea: Preparation of iodine complexes, structural investigation and release studies.

Biobased materials are expanding dramatically in various industrial applications due to their unique intrinsic properties. In this study, various chemical functionalization procedures were used to synthesize guar gum, a naturally occurring polysaccharide-based polyurea, and its iodine complexes. Firstly, guar gum was subjected to tosylation reaction using p-toluene sulphonyl chloride to introduce tosyl moieties in the polymer chain with the degree of substitution (DS) ranging between 0.16 and 1.54. Sample having the highest degree of tosyl moiety was further reacted with tris(2-aminoethyl) amine to produce 6-deoxy-6-tris(2-aminoethyl) amine derivative via nucleophilic substitution reaction to impart amino functional groups. The degree of substitution in 6-deoxy-6-tris(2-aminoethyl) amine derivative was found to be 0.59. 6-deoxy-6-tris(2-aminoethyl) amine derivative was reacted with different diisocyanates (Toluene-2,4-diisocyanate (TDI), 1,6-diisocyanatohexane (HMDI)) to produce guar gum based polyurea. Iodine complexes of the resulting polyurea were prepared by reacting with different iodinating agents. Different chemical reactions, formation of polyurea and its iodine complexes were thoroughly analyzed by different analytical techniques such as FT-IR, NMR, elemental analysis, XRD, UV-Vis spectroscopy, and a reaction scheme has been proposed. Morphological and rheological characteristics were analyzed by SEM and viscosity measurement. Thermal analysis was carried out by TGA and DSC studies. Finally, by examining the complex's UV-Vis spectra, the iodine release characteristics from polyurea­iodine complexes were investigated.

Development and evaluation of guar gum-coated nano-nutriosomes for cyanidin-3-O-glucoside encapsulation.

Cyanidin-3-O-glucoside (C3G) is a type of water-soluble flavonoid compound that is abundantly found in fruits and vegetables. C3G possesses numerous biological activities, however, it is prone to breakdown under environmental conditions. To overcome these issues, we developed nano-nutriosome (NS) carriers created by vortex-mixing and probe-sonication techniques for C3G encapsulation in which the phospholipid and Nutriose® FB06 were chosen as carrier material, and guar gum (GG) as a coating material to formulate a unilamellar and multicompartment structure. This study aimed to develop and evaluate C3G-loaded nano-nutriosomes coated by GG (GG-C3G-NS) for improving physicochemical stability, antioxidant activity, cellular uptake, and controlled release properties. The C3G-NS and GG-C3G-NS are nanosized (143.47 to 154.13 nm), with high encapsulation efficiency (>93.31 %). The NS carriers successfully encapsulated C3G which was confirmed by transmission electron microscopy, differential scanning calorimetry, and Fourier transform infrared spectroscopy. C3G showed more stability in storage, thermal, pH, ionic, and oxidative conditions. Furthermore, the NS exhibited a better-controlled release of C3G in different food stimulant conditions and in vitro release study. Additionally, NS systems enhanced cellular uptake and showed no cytotoxicity. Overall, GG-NS could be a promising nanocarrier for improving the stability, controlled release, and antioxidant activity of bioactive compounds.

Fermenter scale production of recombinant beta-mannanase by E. coli BL21 cells under microaerobic environment.

Aim of the study was to optimize and produce beta-mannanase at fermenter scale by using cheaper minimal media. Increased production of beta-mannanase from Microbacterium camelliasinensis CIAB417 was achieved by heterologous expression in E. coli BL21 (DE3). The scale-up production of beta-mannanase was optimized from shake flask to 5-L fermenter. The cost-effective minimal media (M9+e) without any vitamins was found to be most effective and optimized for culturing the cells. The same media displayed no significant fluctuation in the pH while culturing the cells for the production of beta-mannanase both at shake flask and fermenter level. Additionally, E. coli cells were able to produce similar amount of dry cell weight and recombinant beta-mannanase both in the presence of micro and macro-oxygen environment. The optimized media was demonstrated to show no significant drop in pH throughout the recombinant protein production process. In one litre medium, 2.0314 g dry weight of E. coli cells yielded 1.8 g of purified recombinant beta-mannanase. The purified enzyme was lyophilized and demonstrated to hydrolyse locust bean gum to release mannooligosaccharides.

Design of Stretchable and Conductive Self-Adhesive Hydrogels as Flexible Sensors by Guar-Gum-Enabled Dynamic Interactions.

The limited elasticity and inadequate bonding of hydrogels made from guar gum (GG) significantly hinder their widespread implementation in personalized wearable flexible electronics. In this study, we devise GG-based self-adhesive hydrogels by creating an interpenetrating network of GG cross-linked with acrylic, 4-vinylphenylboronic acid, and Ca2+. With the leverage of the dynamic interactions (hydrogen bonds, borate ester bonds, and coordination bonds) between -OH in GG and monomers, the hydrogel exhibits a high stretchability of 700%, superior mechanical stress of 110 kPa, and robust adherence to several substrates. The adhesion strength of 54 kPa on porcine skin is obtained. Furthermore, the self-adhesive hydrogel possesses stable conductivity, an elevated gauge factor (GF), and commendable durability. It can be affixed to the human body as a strain sensor to obtain precise monitoring of human movement behavior. Our research offers possibilities for the development of GG-based hydrogels and applications in wearable electronics and medical monitoring.

In-depth understanding of transport behavior of sulfided nano zerovalent iron/reduced graphene oxide@guar gum slurry: Stability and mobility.

Nanoscale zero-valent iron (NZVI), which has the advantages of small particle size, large specific surface area, and high reactivity, is often injected into contaminated aquifers in the form of slurry. However, the prone to passivation and agglomeration as well as poor stability and mobility of NZVI limit the further application of this technology in fields. Therefore, sulfided NZVI loaded on reduced graphene oxide (S-NZVI/rGO) and guar gum (GG) with shear-thinning properties as stabilizers were used to synthesize S-NZVI/rGO@GG slurries. SEM, TEM, and FT-IR confirmed that the dispersion and anti-passivation of NZVI were optimized in the coupled system. The stability and mobility of the slurry were improved by increasing the GG concentration, enhancing the pH, and decreasing the ionic strength and the presence of Ca2+ ions, respectively. A modified advection-dispersion equation (ADE) was used to simulate the transport experiments considering the strain and physicochemical deposition/release. Meanwhile, colloidal filtration theory (CFT) demonstrated that Brownian motion plays a dominant role in the migration of S-NZVI/rGO@GG slurry, and the maximum migration distance can be increased by appropriately increasing the injection rate. Extended-Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory showed that the excellent stability and migration of S-NZVI/rGO@GG slurry mainly came from the GG spatial forces. This study has important implications for the field injection of S-NZVI/rGO@GG slurry. According to the injection parameters, the injection range of S-NZVI/rGO@GG slurry is effectively controlled, which lays the foundation for the promotion of application in actual fields.

The α-linkage in funoran and agarose could be hydrolyzed by a GH96 family enzyme: Discovery of the α-funoranase.

Agarans represent a group of galactans extracted from red algae. Funoran and agarose are the two major types and commercially applied polysaccharides of agaran. Although the glycoside hydrolases targeting ß-glycosidic bonds of agaran have been widely investigated, those capable of degrading α-glycosidic bonds of agarose were limited, and the enzyme degrading α-linkages of funoran has not been reported till now. In this study, a GH96 family enzyme BiAF96A_Aq from a marine bacterium Aquimarina sp. AD1 was heterologously expressed in Escherichia coli. BiAF96A_Aq exhibited dual activities towards the characteristic structure of funoran and agarose, underscoring the multifunctionality of GH96 family members. Glycomics and NMR analysis revealed that BiAF96A_Aq hydrolyzed the α-1,3 glycosidic bonds between 3,6-anhydro-α-l-galactopyranose (LA) and ß-d-galactopyranose-6-sulfate (G6S) of funoran, as well as LA and ß-d-galactopyranose (G) of agarose, through an endo-acting manner. The end products of BiAF96A_Aq were majorly composed of disaccharides and tetrasaccharides. The identification of the activity of BiAF96A_Aq on funoran indicated the first discovery of the funoran hydrolase for α-1,3 linkage. Considering the novel catalytic reaction, we proposed to name this activity as "α-funoranase" and recommended the assignment of a dedicated EC number for its classification.

A multifunctional Ag NPs/guar gum hydrogel as versatile platform for catalysts, antibacterial agents, and construction of oil-water separation interfaces.

The frequently encountered wastewater contaminations, including soluble aromatic compound and dye pollutants, pathogenic bacteria, and insoluble oils, have resulted in significant environmental and human health issues. It poses a challenge to utilize identical materials for the treatment of complex wastewater. Herein, in this research, multifunctional Ag NPs/guar gum hybrid hydrogels were fabricated using a facile in situ reduction and self-crosslinking method for efficient remediation of complex wastewater. The Ag NPs/guar gum hybrid hydrogel showed remarkable remodeling, adhesive, and self-healing characteristics, which was favorable for its versatile applications. The combination of Ag NPs with the guar gum skeleton endowed the hybrid hydrogel with exceptional catalytic activity for reducing aromatic compounds and dye pollutants, as well as remarkable antibacterial efficacy against pathogenic bacteria. In addition, the Ag NPs/guar gum hybrid hydrogel could be employed to coat a variety of substrates, including cotton fabrics and stainless steel meshes. The hydrogel coated cotton fabrics and meshes presented superhydrophilicity/underwater superoleophobicity, excellent antifouling capacity, and outstanding recyclability, which could be successfully applied for efficient separation of oil-water mixtures. The findings of this work provide a feasible and cost-effective approach for the remediation of intricate wastewater.

Optimization of guar gum-based anti-browning coating for prolonging the shelf life of cut potatoes.

The impact of guar gum (GG), crude algae ethanolic extract (CAEE), and turmeric essential oil (TEO) incorporated edible coating formulations on the quality of cut potatoes was investigated at room temperature (27 ±â€¯3 °C, 70-85 % RH) storage using a rotatable central composite design. Besides, 30 % glycerol, 5 % calcium chloride, and 3 % ascorbic acid (w/w) were added to the coating solution as additives. The surface color, respiration rate, water vapor transmission rate, visible mold growth, and sensory analysis were assessed after seven days of storage. The inclusion of ascorbic acid and TEO in edible coating demonstrated a more effective delay in browning. The coated potatoes had lower OTR, CTR, and WVTR values for GG concentrations of 0.5 to 1 g/100 mL than the control. Compared to additives, higher concentrations of GG improved response parameters. The WVTR value of coated potatoes was significantly impacted by the interaction between CAEE and TEO with GG. Incorporating CAEE and TEO into the formulations of guar gum led to a reduction in the permeability of the coating to oxygen and water vapor. The seven days of extended shelf life compared to two days of control were observed with the optimized coating formulation. Furthermore, the application of the coating treatment proved effective in preventing enzymatic browning and creating a barrier against moisture and gases, contributing to prolonged freshness during extended storage periods.

Superabsorbent quaternary ammonium guar gum hydrogel with controlled release of humic acid for soil improvement and plant growth.

Growing plants in karst areas tends to be difficult due to the easy loss of water and soil. To enhance soil agglomeration, water retention, and soil fertility, this study developed a physically and chemically crosslinked hydrogel prepared from quaternary ammonium guar gum and humic acid. The results showed that non-covalent dynamic bonds between the two components delayed humic acid release into the soil, with a release rate of only 35 % after 240 h. The presence of four hydrophilic groups (quaternary ammonium, hydroxyl, carboxyl, and carbonyl) in the hydrogel more than doubled the soil's water retention capacity. The interaction between hydrogel and soil minerals (especially carbonate and silica) promoted hydrogel-soil and soil­carbonate adhesion, and the adhesion strength between soil particles was enhanced by 650 %. Moreover, compared with direct fertilization, this degradable hydrogel not only increased the germination rate (100 %) and growth status of mung beans but also reduced the negative effects of excessive fertilization on plant roots. The study provides an eco-friendly, low-cost, and intelligent system for soil improvement in karst areas. It further proves the considerable application potential of hydrogels in agriculture.

Self-Healing Guar Gum-Based Nanocomposite Hydrogel Promotes Infected Wound Healing through Photothermal Antibacterial Therapy.

Preventing bacterial infections is a crucial aspect of wound healing. There is an urgent need for multifunctional biomaterials without antibiotics to promote wound healing. In this study, we fabricated a guar gum (GG)-based nanocomposite hydrogel, termed GBTF, which exhibited photothermal antibacterial therapy for infected wound healing. The GBTF hydrogel formed a cross-linked network through dynamic borate/diol interactions between GG and borax, thereby exhibiting simultaneously self-healing, adaptable, and injectable properties. Additionally, tannic acid (TA)/Fe3+ nanocomplexes (NCs) were incorporated into the hydrogel to confer photothermal antibacterial properties. Under the irradiation of an 808 nm near-infrared laser, the TA/Fe3+ NCs in the hydrogel could rapidly generate heat, leading to the disruption of bacterial cell membranes and subsequent bacterial eradication. Furthermore, the hydrogels exhibited good cytocompatibility and hemocompatibility, making them a precandidate for preclinical and clinical applications. Finally, they could significantly promote bacteria-infected wound healing by reducing bacterial viability, accelerating collagen deposition, and promoting epithelial remodeling. Therefore, the multifunctional GBTF hydrogel, which was composed entirely of natural substances including guar gum, borax, and polyphenol/ferric ion NCs, showed great potential for regenerating infected skin wounds in clinical applications.

Efficient production of High-Purity manno-oligosaccharides from guar gum by citric acid and enzymatic hydrolysis.

Currently, the production of manno-oligosaccharides (MOS) from guar gum faces challenges of low oligosaccharide enzymatic hydrolysis yield and complicated steps in separation and purification. In this work, a potential strategy to address these issues was explored. By combining citric acid pretreatment (300 mM, 130 °C, 1 h) with ß-mannanase hydrolysis, an impressive MOS yield of 61.8 % from guar gum (10 %, w/v) was achieved. The key success lay in the optimizing conditions that completely degraded other galactomannans into monosaccharides, which could be easily removable through Saccharomyces cerevisiae fermentation (without additional nutrients). Following ion exchange chromatography for desalination, and concluding with spray drying, 4.57 g of solid MOS with a purity of 90 % was obtained from 10 g of guar gum. This method offers a streamlined and effective pathway for obtaining high-yield and high-purity MOS from guar gum by combining citric acid pretreatment and enzymatic hydrolysis.

Antioxidant Active Polysaccharides Extracted with Oxalate from Wild Blackthorn Fruits (Prunus spinosa L.).

Although several therapeutic effects have been attributed to wild blackthorn fruits, their use is still negligible. Purification of the antioxidant-active fraction, obtained from wild blackthorn fruits by hot ammonium oxalate extraction (Ao), yielded seven fractions after successive elution with water, sodium chloride and sodium hydroxide solutions. The purified fractions differ in carbohydrates, proteins, and phenolics. About 60% of the applied Ao material was recovered from the column, with the highest yields eluted with 0.25 M NaCl solution, accounting for up to 70 wt% of all eluted material. Analyses have shown that two dominant fractions (3Fa and 3Fb) contain 72.8-81.1 wt% of galacturonic acids, indicating the prevalence of homogalacturonans (HG) with a low acetyl content and a high degree of esterification. The low content of rhamnose, arabinose and galactose residues in both fractions indicates the presence of RG-I associated with arabinogalactan. In terms of yield, the alkali-eluted fraction was also significant, as a dark brown-coloured material with a yield of ~15 wt% with the highest content of phenolic compounds of all fractions. However, it differs from other fractions in its powdery nature, which indicates a high content of salts that could not be removed by dialysis.

Effect of guar gum, gelatin, and pectin on moisture changes in freeze-dried restructured strawberry blocks.

This study aimed to investigate the effects of edible gum addition on moisture changes in freeze-dried restructured strawberry blocks (FRSB), which involved five groups: the control, 1.2% guar gum, 1.2% gelatin, 1.2% pectin, and the composite group with 0.5% guar gum, 0.5% gelatin, and 0.45% pectin. The results indicated that the drying rates of the five groups of FRSB presented similar early acceleration and later deceleration trends. Moisture content in FRSB was linearly predicted by peak area of low field nuclear magnetic resonance with R2 higher than 0.90 for all the five groups. The FRSB samples in the gelatin and composition groups formed a denser porous structure and had a lower hygroscopicity after four days of storage. This study provides a theoretical basis for controlling the processing of FRSB.

Molecular modification of low-dissolution soy protein isolates by anionic xanthan gum, neutral guar gum, or neutral konjac glucomannan to improve the protein dissolution and stabilize fish oil emulsion.

Herein, the effects of anionic xanthan gum (XG), neutral guar gum (GG), and neutral konjac glucomannan (KGM) on the dissolution, physicochemical properties, and emulsion stabilization ability of soy protein isolate (SPI)-polysaccharide conjugates were studied. The SPI-polysaccharide conjugates had better water dissolution than the insoluble SPI. Compared with SPI, SPI-polysaccharide conjugates had lower ß-sheet (39.6 %-56.4 % vs. 47.3 %) and α-helix (13.0 %-13.2 % vs. 22.6 %) percentages, and higher ß-turn (23.8 %-26.5 % vs. 11.0 %) percentages. The creaming stability of SPI-polysaccharide conjugate-stabilized fish oil-loaded emulsions mainly depended on polysaccharide type: SPI-XG (Creaming index: 0) > SPI-GG (Creaming index: 8.1 %-21.2 %) > SPI-KGM (18.1 %-40.4 %). In addition, it also depended on the SPI preparation concentrations, glycation times, and glycation pH. The modification by anionic XG induced no obvious emulsion creaming even after 14-day storage, which suggested that anionic polysaccharide might be the best polysaccharide to modify SPI for emulsion stabilization. This work provided useful information to modify insoluble proteins by polysaccharides for potential application.