Biosurfactant and bioemulsifier as promising molecules produced by Mucor hiemalis isolated from Caatinga soil

BACKGROUND: The present study describes the production of biosurfactant (BS) and emulsifier (BE) by the filamentous fungus Mucor hiemalis UCP 0039, as well as the characterization and stability of the both biomolecules for environmental or industrial applications. RESULTS: Biosurfactants and bioemulsifiers are amphiphilic compounds and are produced as extracellular molecules. The results showed that bioproduct obtained by shaker condition reduced the water surface tension of 72 to 32 mN/m and reached an emulsification index of 96%, while the static cultivation resulted in a biomolecule with a surface tension of 40 mN/m and an emulsification index of 96%, suggesting the production of a biosurfactant and bioemulsifier, respectively. The compounds showed glycolipid nature but the biosurfactant presented cationic charge, while the bioemulsifier, anionic charge. Thus, the results confirmed that M. hiemalis produced two distinct biomolecules under different parameters and in the same culture medium. CONCLUSIONS: It is the first time that biosurfactant and emulsifier production has been described in the same medium and under different physical conditions by Mucor hiemalis. Both biomolecules showed thermal stability, as well as have significant effect on the viscosity of hydrophobic compounds, indicating the excellent potential for environmental safety or industrial applications to improve the efficiency of sustainable and economic technologies.

Recovery of chitin and chitosan from shrimp waste with microwave technique and versatile application / Recuperação de quitina e quitosana de resíduos de camarão por micro-ondas e aplicação versátil

In this study, chitin and chitosan were extracted from Litopenaeus vannamei waste using chemical and microwave methods. Shrimp waste was cleaned, dried and ground sieved to 16, 32 and 60 mesh, and the samples were depigmented, demineralized, and deproteinized. Then, the chitin was submitted to a deacetylation process by 45% NaOH solution under microwave irradiation at 600w, for intermittent 15 min or using 5 pulses of 5 minutes. The study showed that the effectiveness of the particle size of 32 mesh and 6 pulses of 5 min to deacetylation with 92% of degree and chitosan yield (52.2%). The polymer chitosan showed higher antimicrobial activity against to Staphylococcus aureus, Escherichia coli, Salmonella enterica and the yeast Candida sp., respectively. The results indicated the feasibility of the microwave radiation as an attractive method to recover chitin and chitosan from shrimp wastes.(AU)

Neste estudo, a quitina e a quitosana foram extraídas de resíduos de Litopenaeus vannamei utilizando métodos químicos e do micro-ondas. Os resíduos de camarão foram limpos, secos e peneirados a 16, 32 e 60 mesh, e as amostras foram despigmentadas, desmineralizadas e desproteinizadas. Posteriormente, a quitina foi submetida a processo de desacetilação por solução de NaOH a 45% sob irradiação de micro-ondas a 600w, durante 15 min intermitentes ou utilizando 6 pulsos de 5 min. O estudo mostrou eficácia nas partículas com tamanho de 32 mesh e 6 pulsos de 5 minutos, com 92% grau de desacetilação e rendimento de quitosana (52,2%). A atividade antimicrobiana foi para Staphylococcus aureus, Escherichia coli e Salmonella enterica contra a levedura Candida sp., respectivamente. Os resultados indicaram a viabilidade da radiação de micro-ondas como um método atraente para recuperação de quitina e quitosana a partir de resíduos de camarão.(AU)

Biosurfactant production by fungi as a sustainable alternative / Produção de biossurfactantes por fungos como uma alternativa sustentável

A wide variety of bacteria is far more exploited than fungi as biosurfactants (BS) or bioemulsifiers (BE), using renewable sources. BS are considered to be environmentally safe and offer advantages over synthetic surfactants. However, the BS yield depends largely on the metabolic pathways of the microorganisms and the nutritional medium. The production of BS or BE uses several cultural conditions, in which a small change in carbon and nitrogen sources affects the quantity of BS or BE produced. The type and quantity of microbial BS or BE produced depend mainly on the producer organism, and factors such as carbon and nitrogen sources, trace elements, temperature and aeration. The diversity of BS or BE makes it interesting to apply them in the pharmaceutical and cosmetics industries, agriculture, public health, food processes, detergents, when treating oily residues, environmental pollution control and bioremediation. Thus, this paper reviews and addresses the biotechnological potential of yeasts and filamentous fungi for producing, characterizing and applying BS or BE.(AU)

Uma grande variedade de espécies bacterianas é bem mais explorada que os fungos como agentes biossurfactantes (BS) ou bioemulsificantes (BE), usando fontes renováveis. Os BS são considerados ecologicamente seguros e oferecem vantagens sobre os surfactantes sintéticos. Entretanto o rendimento de BS depende grandemente das vias metabólicas dos micro-organismos e do meio nutricional. A produção de BS ou BE utiliza várias condições culturais, em que uma pequena alteração nas fontes de carbono e nitrogênio afeta a produção de BS. O tipo e a quantidade de BS ou BE microbianos produzidos dependem principalmente do organismo produtor e de fatores como fontes de carbono e nitrogênio, oligoelementos, temperatura e aeração. A diversidade de BS ou BE torna-os interessantes para aplicação nos campos farmacêutico, cosmético, da agricultura, da saúde pública, em processos alimentares, detergentes, no tratamento de resíduos oleosos, no controle de poluição ambiental e na biorremediação. Assim, a presente revisão aborda o potencial biotecnológico de leveduras e fungos filamentosos para produção, caracterização e aplicações de BS ou BE.(AU)

Copper-induced adaptation, oxidative stress and its tolerance in Aspergillus niger UCP1261

Background The effects of exposure to copper, during growth, on the production of biomass, total protein, catalase, glutathione-S transferase, glutathione peroxidase, peroxidase, polyphosphate, acid and alkaline phosphatases, ultrastructure and the ability to remove this metal from Aspergillus niger, obtained from caatinga soil, were evaluated. Results All parameters tested were influenced by the concentration of metal in the culture medium. The presence of metal induced high levels of antioxidant enzymes, including lipid peroxidation, thereby revealing the appearance of an oxidative stress response. The variation in polyphosphate levels indicates the participation of the polymer in response to stress induced by copper. The activities of the phosphatases were positively influenced by growing them in the presence of copper. Ultrastructure changes in the cell surface, electron density, thickness, and septation were visualized by exposing cells to increasingly larger concentrations of metal. The isolate was able to remove the agent from the growth medium, while maintaining its physiological functions. The metal removed from the cultures exposed to 0.5 mM, 1 mM and 2 mM copper exhibited percentages of removal equivalent to 75.78%, 66.04% and 33.51%. Conclusions The results indicate that the isolate was able to grow in high concentrations of copper, activates mechanisms for adaptation and tolerance in the presence of metal, and is highly efficient at removing the agent. Such data are fundamental if a better understanding is to be reached of the cellular and molecular abilities of native isolates, which can be used to develop bioprocesses in environmental and industrial areas.

Characterization and properties of the biosurfactant produced by Candida lipolytica UCP 0988

Background: Biotechnological processes are costly, especially for the production of biosurfactants. The successful production of a biosurfactant is dependent on the development of processes using low cost raw materials. Considering the importance of the characteristics of a biosurfactant to facilitate its industrial application, the properties of the biosurfactant produced by Candida lipolytica through previously optimized medium have been established. Results: The yeast was grown for 72 h to determine the kinetics of growth and production. The surface tension of the cell-free broth was reduced from 55 to 25 mN/m. The yield of biosurfactant was 8.0 g/l with a CMC of 0.03%. The biosurfactant was characterized as an anionic lipopeptide composed of 50% protein, 20% lipids, and 8% of carbohydrates. Conclusions: The isolated biosurfactant showed no toxicity against different vegetable seeds: Brassica oleracea, Solanum gilo and Lactuca sativa L. and the micro-crustacean Artemia salina. The properties of the biosurfactant produced suggest its potential application in industries that require the use of effective compounds at low cost.

Biosurfactant production by Chr omobacterium violaceum ATCC 12472 using corn steep liquor and corn post-frying oil as nutrients / Produção de biossurfactante por Chromobacterium violaceum ATCC 12472 utilizando milhocina e óleo de milho pós-fritura como nutrientes

The interest in microbial surfactants has been increased considerably in the recent years. Environmental concern among consumers, combined with new laws control of the environment, the demand for natural surfactants, to replace petrochemicals. The microbial surfactants have been tested in many industrial and environmental applications, such as in bioremediation, oil dispersion and oil recovery, replacing chemical surfactants. Furthermore, they can also be used in the food, cosmetic, detergent and agriculture. However, increased environmental concern among consumers to new legislation combined control of the environment has led to demand for natural surfactants as alternatives to existing products. This work aimed to produce biosurfactant by Chromobacterium violaceum ATCC 12472, using low nutrient value. The surface tension of the biosurfactant produced by C. violaceum ATCC 12472 had values between 29 and 40 mN/m. The best result was observed on the assay 8 (8.0% of corn steep liquor, 1.0% of lactose and corn oil post-frying 7.5%) factorial design, within 72 hours of fermentation, lowering the surface tension of water from 71 to 29 mN/m. The best results of the index (E24) and emulsification activity (UEA) were observed in the central point, and using the both methods and corn post-frying oil resulted in 72% of emulsification, and the emulsification activity value of 6 UAE. The results demonstrate the high potential of C. violaceum promising in producing a biosurfactant.

O interesse em surfactantes de origem microbiana tem aumentado consideravelmente nos últimos anos. A preocupação ambiental entre os consumidores, combinada às novas legislações de controle do meio ambiente, aumentou a procura por surfactantes naturais em substituição aos derivados petroquímicos. Os surfactantes microbianos têm sido testados em muitas aplicações ambientais e industriais, como na biorremediação, na dispersão de manchas oleosas e na recuperação de petróleo, substituindo os surfactantes químicos. Além disso, também podem ser utilizados nas indústrias de alimentos, cosméticos, detergentes e na agricultura. Neste trabalho foi produzido biossurfactante por Chromobacterium violaceum ATCC 12472, utilizando nutrientes de baixo valor agregado. A tensão superficial do biossurfactante produzido por C. violaceum ATCC 12472 teve valores entre 29 e 40 mN/m. O melhor resultado foi observado no ensaio 8 (milhocina 8,0%, lactose 1,0% e óleo de milho pós-fritura 7,5%) do planejamento fatorial, com 72 horas de fermentação, reduzindo a tensão superficial da água de 71 para 29 mN/m. Os melhores resultados do índice (E24) e da atividade de emulsificação (UEA) foram observados no ponto central, sendo utilizados para ambos os métodos o óleo de milho, que resultou no E24 de 2% e atividade com valores acima de 6 UAE. Os resultados obtidos demonstram o elevado potencial de C. violaceum na produção de um promissor biossurfactante.

Monitoring the effect of pyrene on the germination and radial growth of the wild and mutant strains of Rhizopus arrhizus UCP402

The physiological mutant of Rhizopus arrhizus was obtained in the pyrene resistance gradient test. Comparative studies were carried out about the behavior of the germination process and the radial growth of the mutant and wild strains of R. arrhizus UCP 402. Sabouraud Sucrose and Yeast Malt Broth cultures containing pyrene (10 mg/L) induced the germination process of the sporangiospores of the wild and mutant strains of R. arrhizus. The radial growth of the strains was inversely proportional to the pyrene concentration in the culture medium. The results showed an adaptation of R. arrhizus UCP 402x (mutant) in the pyrene (50mg/L) and suggested a higher ability of application in the removal of pyrene from the contaminated areas.

O mutante fisiológico de Rhizopus arrhizus foi obtido pelo teste do gradiente de resistência ao pireno. Estudos comparativos conduzidos sobre o comportamento do processo de germinação e o crescimento radial foram realizados entre as amostras selvagem e mutante de R. arrhizus UCP 402. Os meios Sabouraud Sacarose e Caldo de Levedura e Malte contendo pireno (10 mg/L) induziram ao processo de germinação de esporangiosporos das amostras selvagem e mutante de R. arrhizus. O crescimento radial das amostras foi inversamente proporcional à concentração de pireno no meio de cultura. Os resultados demonstraram uma excelente adaptação da amostra mutante de R. arrhizus UCP 402x na concentração de pireno (50 mg/L), sugerindo uma alta habilidade e possibilidade de aplicação na remoção de pireno em áreas contaminadas.

Growth of Cunninghamella elegans UCP 542 and production of chitin and chitosan using yam bean medium

Microbiological processes were used for chitin and chitosan productions by Cunninghamella elegans (UCP 542) grown in a new economic culture medium. The assay was carried out to evaluate the growth of C. elegans using yam bean (Pachyrhizus erosus L. Urban) medium, in different times of growth (24, 48, 72 and 96 hrs), incubated at 28°C in an orbital shaker at 150 rpm. The lyophilized biomass was determined by gravimetry. The polysaccharides were extracted by alkali-acid treatment, and characterized by infrared spectroscopy, titration and viscosity. C. elegans grown in the yam bean medium and produced higher yields of biomass (24.3 g/ mL) in 96 hrs. The high level was chitosan (66 mg/g), and chitin (440 mg/g) were produced at 48 and 72 hrs of growth, respectively. The polysaccharides showed degree of deacetilation and viscosimetric molecular weight as: 6.2 percent and 3.25 x10(4) g/mol for chitin, and 85 percent and 2.72 x 10(4) g/mol for chitosan, respectively. The results obtained suggest high biotechnological potential of yam bean as an economic source to produce chitin and chitosan by C. elegans. In addition, the new medium using yam bean for production of the chitin and chitosan may be used for many purposes to reduce the cost price of fermentation processes.

Production and stability studies of the bioemulsifier obtained from a new strain of Candida glabrata UCP 1002

Evaluation of both tenso-active and emulsifying activities indicated that a biosurfactant was produced by the newly isolated and promising strain Candida glabrata isolated from mangrove sediments. The extracellular water-soluble emulsifying agent was isolated and identified as a heteropolymer. The maximum of bioemulsifier production was observed when the strain was grown on soluble and insoluble substrates cotton seed oil plus glucose, reaching values of 10.0 g/l after 144 hrs at 200 rpm. The cell-free culture broth containing the examined agent lowered the surface tension of the medium to 31 mN/m. Stable and compact emulsions with emulsifying activity of 75 percent of cotton seed oil were detected. The emulsification capacity remained practically unaltered within a wide pH (2-12), temperature (4-80°C) ranges and under NaCl concentrations up to 10 percent.

Partition of proteins in aqueous two-phase systems based on Cashew-nut tree gum and poly(ethylene glycol)

A partição de duas proteínas, albumina de soro bovino (BSA) e tripsina foi estudada no sistema bifásico aquoso Polietileno glicol(PEG) - Goma do cajueiro. O diagrama de fases foi estabelecido para a Goma do Cajueiro e para PEG de peso molecular 1500 em duas diferentes temperaturas. A influência de vários parâmetros na partição destas proteínas, incluindo concentração dos polímeros, pH, adição de sal e temperatura foi investigada. Os resultados desta pesquisa demonstraram a importância das características da proteína na partição em sistemas bifásicos aquosos.

Recovery of ascorbic oxidoreductase from crude extract with an aqueous two-phase system in a perforated rotating disc contactor

Uma coluna de discos perfurados rotativos foi utilizada na extração da enzima ascorbato oxidorredutase (E.C.1.10.3.3), obtida do extrato bruto de Curcubita maxima, através da utilização do sistema bifásico aquoso Polietilenoglicol-sais de fosfato. Os efeitos da velocidade da fase dispersa nos coeficientes de transferência de massa e na eficiência de separação para valores de 1, 2 e 3 mL/min foram estudados. Observou-se um aumento da transferência de massa com a velocidade da fase dispersa, enquanto que a eficiência de separação demonstrou uma ligeira redução com o aumento deste parâmetro. Os resultados experimentais obtidos durante a extração contínua demonstraram que a atividade da ascorbato oxidorredutase se concentrou preferencialmente na fase rica em sal para todas as condições estudadas. A maior recuperação da atividade enzimática foi de 236%, com um fator de purificação de 34 para o valor de 1 mL/min para a fase dispersa.

Heavy metal biosorption by chitin and chitosan isolated from Cunninghamella elegans (IFM 46109)

Chitin and chitosan were extracted from mycelial biomass of Cunninghamella elegans and the performance for copper, lead and iron biosorption in aqueous solution was evaluated. The growth curve of C. elegans was accomplished by determination of biomass, pH, glucose and nitrogen consumption. Chitin and chitosan were extracted by alkali-acid treatment and the yields were 23.8 and 7.8 percent, respectively. For the adsorption analysis, the process of heavy uptake metal sorption was evaluated using polysaccharides solutions (1 percent w/v). The rate of metallic biosorption was dependent upon the concentration and pH of metal solutions, and the best results were observed with pH 4.0. Chitosan showed the highest affinity for copper and chitin for iron adsorption. The results suggest that C. elegans (IFM 46109) is an attractive source of production of chitin and chitosan, with a great potential of heavy metals bioremediation in polluted environments.

Effects of phosphorus on polyphosphate accumulation by Cunninghamella elegans

O crescimento, consumo de fosfato e glicose, bem como o conteúdo de fósforo, a distribuicão, estrutura e localizacão de polifosfato foram avaliados no micélio de Cunninghamella elegans cultivado em meios contendo diferentes concentracões de fosfato. Os resultados permitiram verificar a influência dessas concentracões de fosfato sobre o crescimento do fungo estudado. A maior concentracão de fosfato proporcionou maior rendimento da biomassa ao longo do crescimento. Uma relacão entre consumo de fosfato e glicose do meio foi observada em relacão ao crescimento e a quantidade de polifosfato total nos micélios cultivados nos diferentes meios de cultivo. Distintos métodos de extracão permitiram identificar e quantificar as diferentes fracões do polifosfato celular de Cunninghamella elegans. A citoquímica ultrastrutural foi utilizada com sucesso para identificar a localizacão e a distribuicão de polifosfato em Cunninghamella elegans. Os resultados revelaram diferencas no padrão de marcacão citoquímica nas diferentes fases do crescimento e meios de cultivo. Uma marcacão uniforme do polifosfato foi observada sobre a superfície celular, em especial, na parede celular e na membrana citoplasmática. Produtos de reacão resultantes da marcacão citoquímica foram também visualizados em estruturas trabeculares, vacuolares, vesiculares, sob a forma de corpos eletrondensos e grânulos dispersos no citoplasma. Os resultados demonstraram o potencial de Cunninghamella elegans na acumulacão de polifosfato, sugerindo uma possível aplicacão em processos biotecnológicos.

New bioemulsifiers produced by Candida lipolytica using D-glucose and babassu oil as carbon sources

Candida lipolytica IA 1055 produced extracellular biosurfactants with emulsification activity by fermentation using babassu oil and D-glucose as carbon sources. Natural seawater diluted at 50 percent supplemented with urea, ammonium sulfate, and phosphate was used as economic basal medium. The best results were achieved with the YSW-B2 medium, which contained urea, ammonium sulfate, and babassu oil and with YSW-B3 medium, which contained urea, ammonium sulfate, phosphate, and babassu oil, kept under fed batch fermentation for 60 hours with 5 percent of babassu oil. For the two media, the maximum specific growth rates were 0.02 h-1 and 0.04 h-1; the generation times were 34.6 h-1 and 17.3 h-1, and the emulsification activities were 0.666 and 0.158 units, respectively. The molecules of these new bioemulsifiers were contituted of carbohydrates, proteins and lipids.

Protoplast formation and regeneration from Streptomyces clavuligerus NRRL 3585 and clavulanic acid production

Protoplasts of the wild type Streptomyces clavuligerus NRRL 3585 (ATCC 27064) were formed from spores cultures obtained in the lag, exponential and stationary growth phases by using 0.5 percent glycine in the culture medium. The protoplasts were obtained by treatment of the cells with lysozyme (Ec û3.2.1.17) 40,000 U (1mg/ml), in an osmotic solution for 90 min at 28oC. The frequency of regenerated protoplasts in the lag phase was 1.7x103 CFU/ml (28,97 percent), in the beginning of the exponential phase 0.4x102 CFU/ml (31.67 percent), in the exponential growth phase 2.5x103 CFU/ml (46.30 percent) and 1.0x105 CFU/ml in stationary phase (48.45 percent). Antibiotic production and activity of regenerated protoplasts were observed in all phases, except in the lag phase. The protoplast formation and regeneration techniques resulted in a new isolate strain of Streptomyces clavuligerus that produced approximately 2.5 fold more clavulanic acid.

Production of extracellular proteases by Mucor circinelloides using d-glucose as carbon source / substrate

Recently, some Mucorales species have been reported as protease producers. The production of extracellular proteases by Mucor circinelloides using glucose as substrate was studied. Experiments were carried out with different D-glucose concentrations (40, 60 and 80 g/L). Biomass, pH and protease activity were determined. Although biomass production had reached best yields for the medium containing D-glucose in a concentration of 80 g/L, the enzymatic production was higher when the substrate concentration was reduced to 40 g/L. The yield factor for product on cell growth and the yield factor for product on carbon substrate were higher when the microorganism grew in medium containing 40 g/L glucose. The kinetics parameters suggest that this strain seems to be promising as an alternative microorganism for protease production.

Polyphospate in zygomycetes: a cytochemical study

The inorganic phosphorus content, and distribution, structure and localization of polyphosphate in mycelia of zygomycetous fungi was evaluated. Ultrastructural cytochemistry was successfully used to identifying the localization and distribution of polyphosphate in Absidia cylindrospora, Gongronella butleri and Mucor javanicus. The results revealed differences in the cytochemical staining pattern in all species studied and a uniform labeling on the cellular surface (cell wall and citoplasmic membrane). Reaction products were observed in intracellular structures and cellular membrane. Intracellular staining was observed in trabecullar, vacuolar and vesicular structures, in dense bodies and in the cytoplasm. However, the cytochemical staining intensity varied during the cellular growth. Analytical procedure revealed the phosphorus content during cell growth. The results demonstrated that phosphorus content varied during cultivation time and could be related to the polyphosphate cytochemical staining. Polyhosphate functions such as storage and utilization are discussed.

Qualidade microbiológica do mapará (Hypophtalmus edentatus) salgado, comercializado em Fortaleza, CE / Microbiological quality of saltet-fish samples of mapará marked in Fortaleza, CE

Foram analisadas 48 amostras de peixe mapará (Hypophtalmus edentatus) salgado, coletadas em dois pontos de comercializaçäo (A e B) estabelecidos na rua Conde d'Eu, centro de Fortaleza, no período de abril a setembro de 1999. As amostras apresentaram Micrococcus, bolores e leveduras em números significantes. Os valores de Microccus se apresentaram no intervalo entre 1,0 x 1000 a 1,8 x 10000 UFC/g para as amostras do ponto de comercializaçäo A e 1,15 x 1000 a 1,43 x 10000 UFC/g para amostras do ponto B, enquanto os de leveduras se mostraram nos intervalos <10 a 8,5 x 1000 e <10 a 9,2 x 1000 UFC/g para A e B, respectivamente. Doze colônias de Penicillium spp. foram identificadas nas 48 amostras. Leveduras do gênero Candida spp. foram identificadas nas amostras provenientes dos pontos A e B, com predominância da espécie Candida albicans. Näo foi observada a presença de Staphylococcus aureus nas amostras.

Faster Chitosan productions by mucoralean strains in submerged culture

Production of chitosan was conducted using two Mucoralean strains, Mucor racemosus and Cunninghamella elegans. Chitosan was extracted from mycelia of M. racemosus and C. elegans at different growth phases on YPD medium. In both fungi, chitosan was rapidly produced, while highest yield of extractable chitosan was found in 24h of cultivation in submerged culture. The yield of chitosan isolated from dry mycelia of M. racemosus was about 40 per cente higher than from C. elegans. The degree of N-acetylation of chitosan was 49 per cente in M. racemosus and 20 per cente in C. elegans, and the D-glucosamine contents were about 48 per cente and 90 per cente, respectively.

A cytochemical study of acid carbohydrates on the surface of Candida lipolytica grown in tween 80-containing medium

Carbohydrate-containing molecules were located on the surface of Candida lipolytica by using ruthenium red in a cytochemical study. The yeast was grown in media containing Tween 80. The surfactant, at 1.0 (per cent) and 0.5 (per cent), was added to the culture medium in different intervals of time, correspondent to the beginning of exponential growth phase, mid of logarithimic phase and beginning of stationary growth phase. Control cultures were grown in a medium containing glucose. The growth of the yeast in media containing glucose and Tween 80 induced changes in the pattern of distribution and location of acid polyssacharides in the cell wall of the microorganism. In adition, the pattern also changed according to Tween 80 concentration. The influence of Tween 80 on cellular carbohydrate expression is discussed.