ABSTRACT
@#Introduction: Nanoparticles exhibit unique features and currently at the forefront of cutting-edge research. Silver nanoparticles (AgNPs) are among the most promising and widely commercialised nanoproducts in various fields. The interaction of these AgNPs with cells remain unclear to connect with its toxicological endpoints. The aim of this study was to investigate the cellular uptake of C. roseus-AgNPs in hepatocellular carcinoma cells HepG2. Methods: The HepG2 cells were treated with the mean IC50 value of C. roseus-AgNPs which was 4.95±0.26 µg/mL for 24, 48 and 72 hours. The effects were compared with the untreated cells and other treatments which include camptothecin, C. roseus-aqueous extract, and AgNO3 . Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to quantify the intracellular Ag+ and Ca2+, while transmission electron microscopy (TEM) imaging was used to visualise the nanoparticle distribution. Results: The HepG2 cells have significantly taken up Ag+ from C. roseus-AgNPs with at least six times higher compared to Ag+ from AgNO3 . The intracellular Ca2+ detected in HepG2 cells for all treatments were significantly higher than the untreated cells, in time-dependent manner. TEM images indicated the endocytosis of C. roseus-AgNPs with the presence of endosomes and exocytic vesicles. Conclusion: The significant accumulation of intracellular Ag+ demonstrated the efficiency of the C. roseus-AgNPs uptake while the increased Ca2+ indicated the early sign of cell injury. The cellular uptake was mainly through endocytosis. These findings are crucial to correlate the physicochemical properties of C. roseus-AgNPs with the anticancer mechanisms towards the development of liver cancer therapy.
ABSTRACT
Plants belonging to the genus Hypericum L. are widely used in traditional folk medicine due to their hypericin and pseudohypericin contents. In this study, we investigated the biological activity, phenolic and elemental content of methanol and acetone extracts of sheepskin grass, Hypericum heterophyllum Vent. a species that that lacks both hypericin and pseudohypericin. The total antioxidant status of the extracts was determined by commercial kits. Antibacterial effect of extracts was investigated on seven bacterial strains. Cytotoxic effects of the extracts on lung cancer cell lines were determined by MTT (3-4,5-dimethyl-thiazolyl-2,5-diphenyltetrazolium bromide) method. Phenolic content was determined by LC-ESI-MS/MS. Elements in the plant were determined by ICP-OES. The total phenolic content and antioxidant status of the species’ methanol extract were found to be higher than the acetone extract. Both of the extracts at a concentration of 20% have an antibacterial effect, especially the antibacterial effect of acetone extract. It was determined that acetone extract has an anticarcinogenic impact depending on the dose. Chlorogenic acid, miquelianin and isoquercitrin are the most abundant flavonoids in methanol and acetone extract. The plant contains Ca, K, and Mg elements in high concentrations. The phenolic substances and elements in H. heterophyllum, widely used in our country, have been presented for the first time in the literature. Besides, it can be said that the plant has antioxidant, anticarcinogen, and antimicrobial activities due to the crucial flavonoids and elements it contains
ABSTRACT
ObjectiveTo obtain content characteristics of inorganic elements in Scutellariae Radix (aged 1-4 years), and to explore the feasibility of identifying the growth years of Scutellariae Radix based on characteristic spectrum of inorganic elements combined with chemometric models. MethodAfter microwave digestion, the contents of Mn, Zn, Ca, Fe, Mg, Na, K, Cr, Cu, Se, As, Cd, Hg, Pb and Ni in 21 batches of Scutellariae Radix were determined by inductively coupled plasma atomic emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS). Meanwhile, characteristic spectrum of inorganic elements in samples was drawn. The identification model was constructed to discriminate the growth years of Scutellariae Radix based on the combination of principal component analysis (PCA), Fisher discriminant function and support vector machine (SVM). ResultThe contents of Mn (7.79-36.48 μg·g-1), Zn (10.12-31.43 μg·g-1), Cu (6.38-17.20 μg·g-1), K (2.98-13.89 μg·g-1), Mg (3.45-7.78 μg·g-1) and Ca (2.32-7.09 μg·g-1) in Scutellariae Radix were detected by ICP-OES and ICP-MS, and their contents increased with the prolongation of growth years. PCA results showed that Cu, Ni, Cd, Na, Mg, Fe, Ca, Zn, Mn and Hg were characteristic elements of Scutellariae Radix. Samples with different years could be divided into four categories in the spatial characteristic diagram of Fisher discriminant analysis. The correct rate of SVM model for identifying the growth years of samples was 95.2%. ConclusionThis established method is accurate and rapid for discriminating the growth years of Scutellariae Radix, which can provide reference for the identification of other Chinese medicinal materials. It is suggested that some elements should be considered as indexes in subsequent construction of the quality evaluation system of Scutellariae Radix.
ABSTRACT
Abstract This study evaluates the efficiency of acid extraction and total digestion to determine the presence of metals in geopropolis produced by the stingless bee Melipona scutellaris. Geopropolis samples were collected at five meliponaries in the city and in the metropolitan region of Salvador, Bahia State, Brazil. The sample treatment methods comprised acid extraction and total digestion. The Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) technique was used to quantify Cd, Cu, Cr, Pb, and Zn. Geopropolis samples submitted to both digestion methods showed statistical differences. For both methods, Cr and Zn showed the highest concentrations, while those of Cd were the lowest. The Cr concentration for determination by total digestion was 37.53 mg/kg, while for acid extraction it was 32.90 mg/kg. For Zn, the concentration was 17.65 mg/kg and 8.85 mg/kg for total digestion and acid extraction, respectively. The total digestion method showed the highest concentrations of the metals evaluated; however, acid extraction (USEPA 3050b) is a more straightforward procedure for metal evaluation in geopropolis samples and presented values that support the use of geopropolis as a bioindicator. The acid extraction method USEPA 3050b, in combination with detection using ICP OES, showed efficiency in analyses carried out to determine metals in geopropolis.
Resumen El objetivo de este artículo fue evaluar la eficacia da extracción ácida y de la digestión total para determinación de metales absorbidos en geopropóleos producidos por Melipona scutellaris. Se colectaron muestras de geopropóleos en cinco meliponarios localizadas en la región metropolitana del Salvador, estado de Bahia, Brasil. Se utilizaron como métodos de tratamiento para muestras, la extracción ácida y la digestión total. Para determinar los metales Cd, Cu, Cr, Pb y Zn se utilizó Espectroscopia de Emisión Óptica con Plasma Acoplado Inductivamente (ICP OES). Se encontraron diferencias estadísticas en la concentración de metales hallados en las muestras de geopropóleos sometidas a los diferentes métodos de digestión. Para ambos métodos de digestión, las mayores concentraciones de metal fueron observadas para Cr y Zn. Entre los metales evaluados Cd presentó la menor concentración. La concentración de Cr para la determinación por digestión total fue de 37,53 mg/kg y para la extracción ácida fue de 32,90 mg/ kg. Para el Zn, la concentración fue de 17,65 mg/kg y 8,85 mg/kg para la digestión total y la extracción ácida, respectivamente. El método de digestión total mostró los mayores valores para concentraciones de los metales evaluados. Entretanto, la extracción ácida, USEPA 3050b, es un procedimiento más simple para la evaluación de metales en muestras de geopropóleos y también mostró valores que pueden satisfacer la necesidad de su uso en evaluaciones de colmenas como bio-indicador. El método de extracción ácida USEPA 3050b en combinación con la detección a través de ICP OES se mostró eficiente para el análisis de metales en geopropóleos.
Resumo O objetivo deste estudo foi avaliar a eficiência da extração ácida e da digestão total para determinação de metais adsorvidos na geoprópolis produzida por Melipona scutellaris. Foram coletadas amostras de geoprópolis em cinco meliponários, situados em Salvador, Estado da Bahia e região metropolitana. Foram utilizados como métodos de tratamento das amostras a extração ácida e a digestão total. Para determinação dos metais Cd, Cu, Cr, Pb e Zn utilizou-se a Espectrometria de Emissão Óptica com Plasma Indutivamente Acoplado (ICP OES). Houve diferença estatística na concentração de metais encontrados nas amostras de geoprópolis submetidas aos diferentes métodos de digestão. Para ambos os métodos de digestão as maiores concentrações de metais foi observada para o Cr e Zn. Dentre os metais avaliados o Cd apresentou a menor concentração. A concentração de Cr para determinação por digestão total foi de 37,53 mg/kg e para extração ácida de 32,90 mg/ kg. Para o Zn, a concentração foi de 17,65 mg/kg e 8,85 mg/kg para digestão total e extração ácida, respectivamente. O método de digestão total apresentou os maiores valores para concentrações dos metais avaliados. No entanto, a extração ácida, USEPA 3050b, é um procedimento mais simples para a avaliação dos metais em amostras de geoprópolis e também apresentou valores que podem satisfazer a necessidade de utilização na avaliação deste produto da colmeia como bioindicador. O método de extração ácida USEPA 3050b em combinação com a detecção por ICP OES mostrou eficiência para análise de metais em geoprópolis.
ABSTRACT
Background: Increasing popularity of Mathan Tailam (mattan tailam, pachai ennai) for the treatment ofdiabetic foot ulcer necessitated standardization and quality control of this medicated oil both in largescale production and quality check in marketed drug.Objective: Present study aims to develop standard operating procedure for the preparation of MathanTailam as per Siddha Formulary of India and its standardization using suitable analytical techniques.Materials and methods: Mathan Tailam was prepared as per Siddha Formulary of India. Physicochemicalparameters and preliminary phytochemical screening were carried out using standard methods. The inhouse prepared sample underwent physico-chemical analysis, qualitative phytochemical analysis, Gaschromatography-mass spectrum (GC-MS) analysis, High performance thin layer chromatographic(HPTLC) fingerprinting profile and inductively coupled plasma-optical emission spectroscopic (ICP-OES)analysis.Results: Physico-chemical parameters of the prepared formulation were comparable to that of coconutoil. Aqueous methonolic extract of this drug was found to be positive for alkaloid, saponin, coumarin,steroid, triterpinoid, quinine and furan. The GC-MS values were comparable to that of the base used i.e.,the coconut oil. HPTLC fingerprinting profile revealed the presence of phytochemicals in the medicatedoil derived from both coconut oil and Datura metel. ICP-OES addressed the mineral portion of theformulation and its safety in heavy metal aspect.Conclusion: All these parameters can be utilized for the overall quality check over its preparation andformulation.© 2017 Transdisciplinary University, Bangalore and World Ayurveda Foundation. Publishing Services byElsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
ABSTRACT
Objective: To provide the new quality control means for Alumen by investigating the elemental differences between calcined Alumen and its counterfeit processed products of ammonium alum, and establishing their characteristic chromatogram. Method: The contents of 22 inorganic elements both in calcined Alumen and processed products of ammonium alum were determined by means of inductively coupled plasma (ICP)-optical emission spectrometer-mass spectrometry (ICP-OES/ICP-MS),SPSS 16.0 was used for cluster analysis (CA) while SIMCA-P 13.0 with t-test and Rank-Sum test was used to identify the differential inorganic elements. In addition, the characteristic spectrum of the inorganic elements for calcined Alumen and counterfeit calcined alumen were established. Result: Calcined Alumen had highest contents of K and Al while counterfeit calcined Alumen has highest contents of Al and Fe;Cr,Sr,and Mn contents in calcined Alumen were relatively higher,while Mn,Ti,and Ga contents in processed products of ammonium alum were relatively higher. The content of K in calcined Alumen was about 205 times of that of counterfeit products. On the contrary,the average contents of Fe,Ti,Mn and Ga in counterfeit products of ammonium alum were much higher than those in calcined Alumen,33,46,38, 27 times, respectively. A total of 18 samples were clustered into two categories in CA:calcined Alumen and processed products of ammonium alum. 18 inorganic elements showed significant difference in contents(PConclusion: This method can be used for quality control of calcined Alumen.
ABSTRACT
Objective@#To establish the method for determination of tungsten and insoluble compounds in the air of workplace by inductively coupled plasma optical emission spectrometry (ICP-OES) .@*Methods@#The tungsten and insoluble compounds were digested by microwave digestion apparatus using nitric acid and hydrofluoric acid, detected by ICP-OES.@*Results@#The linearity of tungsten and insoluble compounds (as tungsten) were good at the range of 0.16-100.0 μg/ml, the minimum quantitation concentration was 0.11 mg/m3, the recovery was ranged from 81.9%-97.1%, the RSD of intra-and inter-batch precision were 0.5%-2.5% and 1.2%-4.4%, respectively.@*Conclusion@#The determination method meet the requirement of analysis and apply to the determination of tungsten and insoluble compounds in the air of workplace.
ABSTRACT
Metals can be leached either directly (physical contact between microorganisms and solid material) or indirectly. The removal of metals from these industrial wastes brings out detoxification of the residues and thus improves the quality of the environment. The waste foundry sand was analyzed for the presence of toxic metals, as the plant uptakes these toxic metals through their food chain which in turn may be harmful to the human beings. In this study Hibiscus was grown on sand blends containing 50% of waste foundry sand (WFS) to assess the availability of Sio2, Al, Ca, Mg, Pb, Cu and Zn. The chemical properties of treated and untreated waste foundry sand were observed. The analysis shows the level of untreated WFS Fe (76.36%), Ca (43.65%) and K (37.49%). Actinomyces sp. was isolated and identified from WFS and was used to bioleach the sand (treated) and was observed to reduce the level of metals present in WFS [Fe (26.54%), Ca (27.67%) and K(5.84%)] and untreated foundry sand had metal levels of [Fe(49.82%), Ca (15.98%) and K(31.65%)]. The treated and untreated sand was later used for growing Hibiscus plant sapling under controlled conditions and was analyzed for the traces of metals absorbed by the plant. The presence of metals was calculated by Atomic Emission Spectroscopy technique that can determine the concentration of trace to major elements. Our observations provide a supportive document on bioleaching of WFS by Actinomyces sp. was adequate in the growth of ornamental plant Hibiscus rosa-sinensis.
ABSTRACT
Van fish is a fish that can live in soda water at pH 9-10. Van fishing area is a very important source of protein for the people. The variations in tissue metal levels according to gender and weight in Van fish (Alburnus tarichi, Güldenstadt 1814) were studied. This study was conducted for the first time in Van fish. Which it is very important for living organisms Calcium(Ca), magnesium(Mg), sodium(Na), potassium(K), cobalt(Co), chromium(Cr) and lithium(Li) elements levels in the muscle, liver, gill, gonad, and brain tissues of Van fish were investigated by using inductively-coupled plasma-optic emission spectroscopy (ICP-OES). The results were evaluated in two groups as macro-elements(Ca, Mg, Na, K) and trace-elements(Co, Cr, Li). Cobalt concentration in brain tissue was found to be higher than those in other tissues. Also, male fish had higher metal concentrations than female fish and their metal levels in brain and gonad tissues varied with their weight (P<0.05). This study shows that consumption of Van fish can be consumed to supply some necessary minerals required for a healthy nutrition.(AU)
Peixes van são a única espécie de peixe vivendo em pH 9-10 no mundo. A área de pescaria Van é uma fonte importante de proteína para a população. As variações de niveis de metal nos tecidos de acordo com sexo e peso do peixe Van (Alburnus tarichi, Güldenstadt 1814) foram estudadas. Esse é o primeiro estudo conduzido com peixes Van. São importantes para organismos vivos o Calcio (Ca), magnésio (Mg), sódio (Na), potássio (K), cobalto (Co), cromio (Cr), e lítio (Li) e foi investigado o nível desses elementos no músculo, fígado, brânquia, gônada, e tecido cerebral dos peixes Van utilizando espectrometria de emissão atômica por plasma acoplado indutivamente (ICP-OES). Os resultados foram avaliados em dois grupos como macro-elementos (Ca, Mg, Na, K) e traços (Co, Cr, Li). Concentração de cobalto em tecido cerebral foi mais alto que em outros tecidos. Peixes machos tinham concentração mais alta de metais que fêmeas e os níveis de metal no cérebro e gônadas variava com seu peso (P<0.05). Esse estudo mostra que o consumo de peixe Van pode suplementar alguns minerais necessários para uma nutrição saudável.(AU)
Subject(s)
Animals , Spectrum Analysis , Tissues/anatomy & histology , Fishes/anatomy & histologyABSTRACT
OBJECTIVE: To establish the method for content determination of 12 trace elements (Cu, Mn, Mg, Cd, Zn, Fe, Ba, Se, Pb, As, Cr, Ni) in Shiquan dabu pills, and to provide reference for further improvement of its quality control.METHODS: ICP-OES was adopted to detect. Microwave digestion was used for sample pretreatment with digestion power of 800 W; digestion process included heating to 120 ℃ keeping for 3 min, heating to 160 ℃ keeping for 5 min, and finally heating to 180 ℃ keeping for 20 min. PF power was 1 150 W, and pump speed was 50 r/min; the flow rate of atomizing gas was 0. 5 L/min, and that of plasma gas was 12. 0 L/min, detection wavelength of 182. 205-455. 403 nm. RESULTS: Results of 12 elements determination were all within standard range according to national standard substance sampling determination. The liner ranges of Cu, Mn, Mg, Cd, Zn, Fe, Ba, As, Cr and Ni were 0. 2-2. 0 mg/L, those of Se and Pb were 0. 4-4. 0 mg/L (r≥0. 999 5). The detection limits ranged 0. 1-8. 5 μg/L, and limits of quantitation were 0. 3-28. 3 μg/L. RSDs of precision tests were all lower than 1. 00% (n=6). The average recovery rates were 88. 5%-99. 0% (RSD were 1. 7%-4. 9%, n=6). CONCLUSIONS: The method is rapid, simple and sensitive, and it can be used for content determination of 12 trace elements in Shiquan dabu pills.
ABSTRACT
Objective@#To establish the method for determination of barium sulfate in the air of workplace. @*Methods@#The barium sulfate was collected by dichloride ethylene filter membrane and then processed by alkali fusion method. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used for the detection of barium sulfate. @*Results@#The sampling efficiency was 100%, the linearity of ICP-OES was good at the range of 0.1~100.0 μg/mL, the recovery was ranged from 93.0%~97.8%, the RSD of intra- and inter-batch precision were 3.7%~7.6% and 4.7%~8.8%, respectively. @*Conclusion@#The sampling method and determination method meet the requirements of analysis and apply to the collection and determination of barium sulfate in the air of workplace.
ABSTRACT
ABSTRACT Determination of potential contaminants elements in food packing films arising from contact with acidic aqueous foods was undertaken by inductively coupled plasma optical emission spectrometry (ICP OES) in accordance with DIN EN 1186-1. Test sections from plastic films were totally immersed in 3% w/v CH3COOH used as the food simulant. Testing was conducted under three conditions: (1) 10 days at 40 ºC; (2) 30 min at 70 ºC and 10 days at 40 ºC; and (3) 30 min at 100 ºC and 10 days at 40 ºC. These time and temperature conditions were considered to be the most severe situations likely to be encountered in practice. Several different containers were investigated, including a borosilicate glass beaker, a glass bottle used for food canning, as well as one of polystyrene. The glass bottle was selected for testing treatments according to procedure (3) and a polystyrene one was chosen for use with procedures (1) and (2). Limits of quantitation were adequate for the determination of Ag, B, Ba, Cd, Cr, Cu, Pb, Sb, Sn and Zn by solution nebulization ICP OES and As by chemical vapor generation (CVG-ICP OES). Results for the analysis of AccuStandard certified reference materials as well as spike recoveries show good agreement with expected concentrations, demonstrating the accuracy and precision of the determinations. Eleven samples of food packing material were analyzed. The lead was present in the range 4.8 - 85.3 µg L-1 in 10 of 11 evaluated packing material, showing the importance of quality control measures.
ABSTRACT
Objective To evaluate the nutritional composition and elemental constituents of Kedrostis africana and their safety aspect. Methods Proximate parameters (moisture, ash, crude fibre, crude fat, proteins, and carbohydrate and energy) were evaluated using ALASA methods, and elemental analysis by ICP-OES technique. Results The results from nutritional analysis showed that the tuber used for this study had a low content of crude fat and high content of ash, crude protein, crude fibre, carbohydrate and energy having the recommended dietary allowances. The tuber was rich in major minerals Na, K, Ca and Mg, there was sufficient amount of trace elements Fe, Cu, and Zn while the anti-nutrients oxalate, phytate, alkaloids, and saponins were detected in amounts that are not harmful according to Food and Agriculture Organization/World Health Organization. Conclusions The outcome of this study suggests that this wild plant has very good nutritional potentials to meet the recommended dietary allowance and it could be a cheap source of essential nutrients that may ameliorate most nutritional challenges and can contribute remarkably to the amount of nutrient intake in human and animal diet.
ABSTRACT
The content of elements in fifteen different regions of Nitraria roborowskii samples were determined by inductively coupled plasma-atomic emission spectrometry(ICP-OES), and its elemental characteristics were analyzed by principal component analysis. The results indicated that 18 mineral elements were detected in N. roborowskii of which V cannot be detected. In addition, contents of Na, K and Ca showed high concentration. Ti showed maximum content variance, while K is minimum. Four principal components were gained from the original data. The cumulative variance contribution rate is 81.542% and the variance contribution of the first principal component was 44.997%, indicating that Cr, Fe, P and Ca were the characteristic elements of N. roborowskii.Thus, the established method was simple, precise and can be used for determination of mineral elements in N.roborowskii Kom. fruits. The elemental distribution characteristics among N.roborowskii fruits are related to geographical origins which were clearly revealed by PCA. All the results will provide good basis for comprehensive utilization of N.roborowskii.
ABSTRACT
Objective To establish a method for the determination of eight heavy metal elements ofPb,Cd,As,Hg,Co,V,Se,Mo in iron dextran by inductively coupled plasma optical emission spectrometry (ICP-OES).Method Through selection of detection wavelengths,optimization of instrument parameters,correction of spectral interference,verification of ionization interference and investigation of suppression methods,the eight heavy metal elements were analyzed by ICP-OES.Results The recovery rate of the detected elements increased 5% to 10% by suppression of ionization interference.The accuracy of the method was good.The spiked recovery rates of the detected elements were from 95.7% to 101.1%.The precision of the method were good (RSD < 3.6%,n =6).The linearities of the detected elements were good,and the correlation coefficients were all greater than 0.999.The detection limits were from 0.15 to 8.09 ng/mL.The quantization limits were from 0.46 to 24.26 ng/mL.Conclusion The method was accurate,sensitivity,rapid and reliable,which can be applied to the determination of contents of eight heavy metal elements in iron dextran.
ABSTRACT
Objective To establish a method for the determination of 8 heavy metal elements of Pb,Cd,As,Hg,Co,V,Se,Mo in iron dextran by inductively coupled plasma optical emission spectrometry (ICP-OES).Method Through selection of detection wavelengths,optimization of instrument parameters,verification of matrix effect interference and investigation of internal standard for correction of matrix effect interference,the 8 heavy metal elements were analyzed by ICP-OES.Results The recovery rate of the detected elements were increased from 83%-90% to 94%-100%,after correction of matrix effect interference by internal standard method.The accuracy of the method were good.The spiked recoveries of the detected elements were from 94.3% to 101.5%.The precision of the method were good (RSD < 3.5%,n =6).The linearities of the detected elements were good,and the correlation coefficients were all greater than 0.999.The detection limits were from 0.22 to 8.54 ng/mL.The quantization limits were from 0.68 to 25.73 ng/mL.Conclusion The established method was accurate,sensitivity,rapid and reliable,which can be applied to the determination of contents of 8 heavy metal elements in iron dextran.
ABSTRACT
Objective To establish a method for the determination of 8 heavy metal elements of Pb,Cd,As,Hg,Co,V,Se,Mo in iron dextran by inductively coupled plasma optical emission spectrometry (ICP-OES).Method Through selection of detection wavelengths,optimization of instrument parameters,verification of matrix effect interference and investigation of internal standard for correction of matrix effect interference,the 8 heavy metal elements were analyzed by ICP-OES.Results The recovery rate of the detected elements were increased from 83%-90% to 94%-100%,after correction of matrix effect interference by internal standard method.The accuracy of the method were good.The spiked recoveries of the detected elements were from 94.3% to 101.5%.The precision of the method were good (RSD < 3.5%,n =6).The linearities of the detected elements were good,and the correlation coefficients were all greater than 0.999.The detection limits were from 0.22 to 8.54 ng/mL.The quantization limits were from 0.68 to 25.73 ng/mL.Conclusion The established method was accurate,sensitivity,rapid and reliable,which can be applied to the determination of contents of 8 heavy metal elements in iron dextran.
ABSTRACT
Objective:To evaluate the nutritional composition and elemental constituents of Kedrostis africana and their safety aspect.Methods:Proximate parameters (moisture,ash,crude fibre,crude fat,proteins,and carbohydrate and energy) were evaluated using ALASA methods,and elemental analysis by ICP-OES technique.Results:The results from nutritional analysis showed that the tuber used for this study had a low content of crude fat and high content of ash,crude protein,crude fibre,carbohydrate and energy having the recommended dietary allowances.The tuber was rich in major minerals Na,K,Ca and Mg,there was sufficient amount of trace elements Fe,Cu,and Zn while the anti-nutrients oxalate,phytate,alkaloids,and saponins were detected in amounts that are not harmful according to Food and Agriculture Organization/World Health Organization.Conclusions:The outcome of this study suggests that this wild plant has very good nutritional potentials to meet the recommended dietary allowance and it could be a cheap source of essential nutrients that may ameliorate most nutritional challenges and can contribute remarkably to the amount of nutrient intake in human and animal diet.
ABSTRACT
Abstract Concentrations of ten elements (Cd, Cr, Cu, Fe, Ni, Pb, Se, Sr, V and Zn) were determinate in muscle tissues of 13 fish species from Aratu Bay, Bahia, Brazil by inductively coupled plasma optical emission spectrometry. The accuracy and precision of our results were checked by using two certified reference materials: BCR-422 cod muscle and SRM 1566b oyster tissue. The average trace element concentrations in the fish species varied in the following ranges, in μg g–1: 0.03-0.8 for Cr; 2.0-33.7 for Cu, 2.4-135.1 for Fe, 1.6-25.6 for Se; 1.6-35.1 for Sr; and 2.8-40.5 for Zn. The Diaptereus rhombeus (carapeba) specie presented the highest concentrations of Se, Cu and Fe. Chromium and Se were present at levels above the limit of tolerance allowed by the National Agency of Sanitary Vigilance (ANVISA). The results were also evaluated using the multivariate analysis techniques: principal component analysis (PCA) and hierarchical cluster analysis (HCA).
Resumo Foram determinadas as concentrações de dez elementos (Cd, Cr, Cu, Fe, Ni, Pb, Se, Sr, V and Zn) em tecidos de músculos de treze espécies de peixes da Baía de Aratu, Bahia, Brasil, utilizando a espectrometria de emissão ótica com plasma indutivamente acoplado. A precisão e exatidão dos resultados foram analisadas utilizando dois materiais de referência certificada: BCR-422 cod muscle e o SRM 1566b oyster tissue. A concentração média dos elementos traço nas espécies de peixes variaram nas seguintes faixas, em μg g−1: Cr = 0,03-0,8; Cu = 2,0-33,7, Fe = 2,4-135,1, Se = 1,6-25,6; Sr = 1,6-35,1; Zn = 2.8-40.5. A espécie Diaptereus rhombeus (carapeba) apresentou as maiores concentrações de Se, Cu e Fe. Cromo e Se apresentaram níveis acima do limite de tolerância estabelecido pela Agência Nacional de Vigilância Sanitária (ANVISA). Os resultados ainda foram avaliados usando técnicas de análises multivariadas: análise de componente principal (PCA) e análise de agrupamento hierárquico (HCA).
Subject(s)
Animals , Trace Elements/analysis , Seafood/analysis , Fishes , Brazil , Food Contamination , Cluster Analysis , Bays , Principal Component Analysis , Metals/analysis , Muscles/chemistryABSTRACT
Piper arboreum Aubl. var. arboreum and P. tuberculatum Jacq. (Piperaceae), both known as "pimenta-longa", are frequently misidentified. Despite the fact that both species are sold as traditional phytotherapeutic products, there are no reports on their quality control. The aim of this study was to prepare and characterize leaf and stem herbal drugs of both species using standard methods aiming to establish parameters for botanical authentication and purity degree for their quality control. Size, shape, color, taste, texture, fracture surface and transection characteristics, and leaf venation patterns are macroscopic diagnostic characters useful to distinguish the herbal drugs when they are not powdered. The following characters are useful for diagnostic purposes of the powdered herbal drugs: cuticular and epicuticular wax patterns, types of trichomes, and wall thickening of the tracheary elements, and shape of the hilum of the starch grains. Emergences are key morphological markers for P. tuberculatum herbal drugs. Physicochemical parameter values were similar in herbal drugs of both species, except acid-insoluble ash value which was higher in the P. arboreum var. arboreum stem herbal drugs. Piper arboreum var. arboreum herbal drugs had the highest metal concentrations. Al, Cu, Mn and V concentrations were the highest, whereas Cd, Co and Hg concentrations were the lowest in the herbal drugs of both species. The results obtained can be used as quality control parameters for the herbal drugs of both species.
Piper arboreum Aubl. var. arboreum e P. tuberculatum Jacq. (Piperaceae), conhecidas como pimenta-longa, são comercializadas como produtos tradicionais fitoterápicos e, frequentemente, identificadas erroneamente, não havendo relatos sobre controle de qualidade dessas espécies. O objetivo do trabalho foi preparar e caracterizar drogas vegetais foliares e caulinares dessas espécies para estabelecer-lhes parâmetros de autenticidade botânica e grau de pureza para o controle de qualidade. Foram utilizados métodos padrões para o preparo e análises estrutural e físico-química das drogas vegetais. São caracteres diagnósticos macroscópicos para distinguir as drogas vegetais íntegras: tamanho, forma, cor, sabor, textura, características da superfície de fratura e da secção transversal e os padrões de venação foliar. São caracteres diagnósticos para distinguir as drogas vegetais pulverizadas: padrões de cutícula e cera epicuticular, tipos de tricoma e espessamento parietal dos elementos traqueais e a forma do hilo dos grãos de amido. Emergências são marcadores morfológicos chave para as drogas vegetais de P. tuberculatum. Os valores dos parâmetros físico-químicos foram similares nas drogas vegetais das espécies, exceto o de cinzas ácido-insolúveis que foi maior nas drogas vegetais caulinares de P. arboreum var. arboreum. As maiores concentrações de metais ocorreram nas drogas vegetais de P. arboreum var. arboreum. As concentrações mais elevadas foram de Al, Cu, Mn e V e as mais baixas de Cd, Co e Hg. Os resultados obtidos poderão ser utilizados como parâmetros de controle de qualidade para as drogas vegetais de ambas as espécies.