Instrumentación rotatoria comparado con instrumentación manual para tratamiento endodóntico en dientes permanentes / Rotary instrumentation compared to manual instrumentation for endodontic treatment in permanent teeth

RESUMEN: Introducción: El éxito del tratamiento endodóntico requiere de la desinfección completa del sistema de canales radiculares. Convencionalmente este procedimiento se realiza a través de maniobras de instrumentación rotatoria o manual e irrigación química. Dentro de las diferentes técnicas de instrumentación, la de tipo rotatoria ha surgido como una alternativa a la instrumentación manual, cuyos beneficios en comparación a ésta aún deben ser dilucidados. Métodos: Realizamos una búsqueda en Epistemonikos, la mayor base de datos de revisiones sistemáticas en salud, la cual es mantenida mediante el cribado de múltiples fuentes de información, incluyendo MEDLINE, EMBASE, Cochrane, entre otras. Extrajimos los datos desde las revisiones identificadas, analizamos los datos de los estudios primarios, realizamos un metanálisis y preparamos una tabla de resumen de los resultados utilizando el método GRADE. Resultados y conclusiones: Identificamos cinco revisiones sistemáticas que en conjunto incluyeron 15 estudios primarios, de los cuales, 10 corresponden a ensayos aleatorizados. Concluimos que el uso de instrumentación rotatoria en comparación a instrumentación manual probablemente disminuye la incidencia del dolor postoperatorio. Además, la instrumentación rotatoria podría disminuir el uso de analgésicos post tratamiento endodóntico. Sin embargo, podría resultar en poca o nula diferencia en la intensidad del dolor, pero la certeza de la evidencia es baja. Además, no es posible establecer con claridad si el uso de instrumentación rotatoria en comparación a la instrumentación manual aumenta la reparación apical debido a que la certeza de la evidencia existente ha sido evaluada como muy baja.

ABSTRACT: Introduction: Successful root canal therapy (endodontic treatment) requires complete disinfection of the root canal system. Traditionally, disinfection of the root canal system involves rotary or manual instrumentation and chemical irrigation. Various rotary instrumentation techniques have emerged as an alternative to manual instrumentation, but its benefits against manual techniques need to be clarified. Methods: We searched in Epistemonikos, the largest database of systematic reviews in health, which is maintained by screening multiple information sources, including MEDLINE, EMBASE, Cochrane, among others. We extracted data from the systematic reviews, reanalyzed data of primary studies, conducted a meta-analysis and generated a summary of findings table using the GRADE approach. Results and conclusions: We identified five systematic reviews that together included 15 primary studies, of which 10 correspond to randomized trials. We conclude that the use of rotary instrumentation compared to manual instrumentation probably reduces the incidence of pain. Also, rotatory instrumentation may reduce the use of postoperative analgesics. However, it could result in little or no difference in pain intensity, but the certainty of the evidence is low. Furthermore, it is not possible to clearly establish whether the use of rotary instrumentation increases apical repair as the certainty of the evidence has been assessed as very low.

Comparative Evaluation of The Efficacy Of Rotary file system (Kedo-S) Vs Hand K-Files In Root Canal Preparation Of Primary Teeth Using Cone Beam Computed Tomography (CBCT) - An In Vitro Study / Avaliação Comparativa da Eficácia dos Sistemas de Limas Rotatórias (Kedo-S) Versus Limas manuais (Kerr) no Preparo do Canais Radiculares de Dentes decíduos Utilizando Tomografia Computadorizada de Feixe Cônico (TCFC) - Um Estudo In Vitro

Objective: To evaluate the efficacy of rotary Kedo-S and hand K-files in shaping ability in primary canines using cone beam computed tomography. Material and Methods: Thirty extracted primary maxillary and mandibular canines were selected. Using cone beam computed tomography the teeth were scanned before instrumentation. In Group I, the teeth were prepared using stainless steel K file up to the size of 40. In the Group II teeth, U1 size Kedo-S rotary file was used in crown down technique. The instrumented teeth were scanned again with cone beam computed tomography and the images were compared. Results: The canal taper was more conical for rotary Kedo-S files as compared to K-files, which was statistically significant. Conclusion: Canal preparation with Rotary files resulted in more conical canals when compared to manual instrumentation in primary teeth that contributes to more uniform obturation. (AU)

Objetivo: Avaliar a eficácia da instrumentação rotatória com limas Kedo-S e instrumentação manual com limas Kerr na modelagem de caninos decíduos utilizando tomografia computadorizada de feixe cônico (TCFC). Material e Métodos: Foram selecionados 30 caninos decíduos superiores e inferiores extraídos. Usando a TCFC, os dentes foram escaneados previamente a instrumentação. No Grupo I, os dentes foram confeccionados com limas de aço inoxidável até o tamanho 40. Nos dentes do Grupo II, utilizou-se a lima rotatória Kedo-S tamanho U1 na técnica coroaápice. Os dentes instrumentados foram novamente escaneados por TCFC e as imagens foram comparadas. Resultados: A conicidade do canal foi maior no grupo com instrumentação rotatória em comparação com a instrumentação manual, com diferença estatística significante entre eles. Conclusão: O preparo do canal com o Rotary resulta em canais mais cônicos em comparação com a instrumentação manual em dentes decíduos, o que contribui para uma obturação mais uniforme.(AU)

Reverse rotary instrumentation in the apical third of the root canal system: An scanning electron microscope analysis

The aim of the present study was to evaluate the efficacy of reverse rotary instrumentation in disinfection of the root canal at the apical third and qualitative confirmatory analysis using the scanning electron microscope (SEM). Subjects and Methods: Sixty single-rooted mandibular premolars were instrumented up to Protaper rotary file size F2 and contaminated with a known species of Enterococcus faecalis (ATCC 29212). The samples were then divided into three groups; Group 1: Experimental group-irrigation by agitation of 1% NaOCl with reverse rotary instrumentation; Group 2: Negative control-no irrigation; and Group 3 positive control-irrigation with 1% NaOCl using a 30-gauge needle. The colony forming units of all the groups were checked. SEM analysis of the samples was focused on the apical third to confirm the absence of E. faecalis biofilms. The data obtained were statistically analyzed by the Fisher's exact test and Pearson's Chi-square test. Results: Group I and III showed significant reduction in the growth of E. faecalis (P ≤ 0.001). SEM confirmed dense bacterial colonies in the Group II consistent with biofilm formation and reduction in bacterial colonies in Group I and II. Conclusion: Agitation with reverse rotary instrumentation in the apical third of the root canal along with 1% sodium hypochlorite proved effective in disinfection of the apical third of the root canal, which was further confirmed by scanning electron microscopic analysis. Hence, it can be used as an adjunct during rotary instrumentation in efficient cleansing of the root canal system in the apical third of the root canal system.

Permeabilización del Canal Radicular y Transporte Apical: Comparación de Tres Sistemas / Root Canal Glide Path and Apical Transportation: Three System Comparison

La mantención de la anatomía original del canal radicular incide directamente en el éxito del tratamiento endodóntico. Para ello, los sistemas rotatorios de instrumentación requieren de canales radiculares permeables. Existen distintas limas y sistemas para la permeabilización o glide path como las limas tipo K manuales de acero inoxidable y los sistemas de NiTi rotatorios PathFile y ProGlider (Dentsply, Maillefer). Así, el objetivo de esta investigación fue comparar la capacidad de distintos sistemas de permeabilización para mantener la anatomía radicular sin producir transporte apical en canales mesiales de molares inferiores humanos extraídos. Se realizó un estudio cuantitativo experimental cuya muestra estuvo conformada por 36 canales mesiales de molares mandibulares humanos extraídos. Las muestras fueron divididas aleatoriamente en tres grupos conformados por 12 canales, cada uno de los cuales fueron sometidos a distintos sistemas de permeabilización (Lima K, PathFile y ProGlider). Las muestras fueron fotografiadas antes y después de la permeabilización utilizando un microscopio con magnificación 30X. Se cuantificó el desplazamiento del canal radicular en sentido mesio - distal y buco - lingual posterior a la permeabilización. Para el análisis de los datos se utilizó el paquete estadístico InfoStat/L y se aplicó la prueba de ANOVA / Tukey. Se observó que el sistema PathFile produce mayor transporte del canal radicular en su tercio apical en la dirección mesio-distal (p=0,77) y el sistema ProGlider en la dirección buco-lingual (p=0,57). Sin embargo, estas diferencias no fueron significativas. En conclusión, los sistemas de permeabilización analizados no presentaron diferencias en cuanto a su capacidad para mantener la anatomía sin producir transporte apical.

Preservation of the original root canal anatomy has a direct influence on the success of an endodontic treatment. In order to achieve this, rotary instrumentation systems require permeable root canals. Different files and systems are used for the establishment of a glide path such as manual stainless steel K files and NiTi rotatory systems like PathFile and ProGlider (Dentsply, Maillefer). Thus, the objective of this research was to compare the ability of different systems to create a glide path and maintain root canal anatomy without producing apical transportation in mesial root canals of extracted human lower molars. A quantitative experimental study was performed with a sample of 36 mesial root canals of extracted human mandibular molars. The samples were randomly divided into three groups consisting of 12 root canals each, which were subjected to different glide path systems (K-Files, PathFile and ProGlider). Samples were photographed before and after creating glide path using a microscope with 30X magnification. The displacement of the root canal in a mesio - distal and bucco - lingual direction was quantified after creating glide path. Data was analyzed using the statistical package InfoStat / L and the ANOVA / Tukey test was applied. The PathFile system produced greater transport of the root canal in its apical third in the mesio-distal direction (p = 0.77) and the ProGlider system in the bucco-lingual direction (p = 0.57). However, these differences were not significant. In conclusion, the glide path systems analyzed do not present any differences in their ability to maintain the anatomy without producing apical transportation.

Performance of Three Single Instrument Systems in the Preparation of Long Oval Canals

Abstract This study aimed to evaluate the performance of the Wave One, Easy ProDesign Logic and One Shape systems in the preparation of long oval root canals. Forty-two mandibular incisors were randomized into three groups: Group I, Wave One Primary (WO) (#25.08); Group II, Easy ProDesign Logic (EPL) (#25.06) and Group III, One Shape (OS) (#25.06). Micro-computed tomography scans were obtained pre- and post-preparation of the samples. Instrument fractures or loss of working length did not occur in any of the groups. There was a statistically significant difference in total root canal volume between the WO and EPL (p<0.05) and OS systems (p<0.05) The mean percentages of instrumented canal area in the middle thirds were 76.9% in the WO, 62.3% in the EPL and 71.8% in the OS (p>0.05). The OS system had the strongest correlation between volume increase and instrumented area (R=0.63). The WO, EPL and OS systems presented mean preparation times of 2.13 min, 0.54 min, and 2.21 min (p<0.05), respectively. All three systems enabled the safe preparation of long oval root canals. The WO system most effectively increased root canal volume, but it did not affect the instrumented areas. The OS system had the strongest correlation between volume increase and instrumented area, while the EPL system was the fastest.

Resumo Este estudo teve como objetivo avaliar o desempenho dos sistemas Wave One, Easy ProDesign Logic e One Shape no preparo de canais radiculares ovais. Quarenta e dois incisivos inferiores foram randomizados em três grupos: Grupo I, Wave One primary (WO) (#25.08); Grupo II, Easy ProDesign Logic (EPL) (#25.06) e Grupo III, One Shape (OS) (#25.06). As amostras foram submetidas a microtomografia computadorizada antes e após o preparo. Não ocorreram fraturas de instrumento ou perda de comprimento de trabalho em qualquer dos três grupos. Houve diferença estatisticamente significante no volume total do canal radicular entre o WO e EPL. A média do percentual de área instrumentada do canal no terço médio foi 76,9% no grupo WO, 62,3% no grupo EPL e 71,8% no grupo OS (p>0,05). O sistema OS teve a correlação mais forte entre o aumento de volume e área instrumentada (R=0,63). Os sistemas WO, EPL e OS apresentaram tempos de preparo médios de 2,13 min, 0,54 min e 2,21 min (p<0,05). Todos os três sistemas foram seguros no preparo canais radiculares ovais. O sistema WO foi mais eficaz no aumento do volume de canal, entretanto, isso não afetou as áreas instrumentadas. O sistema OS teve a correlação mais forte entre o aumento de volume e área instrumentada, enquanto o sistema EPL foi o mais rápido.

Manual and Rotary Instrumentation Ability to Reduce Enterococcus faecalis Associated with Photodynamic Therapy in Deciduous Molars

This aim of this study was to assess the ability of manual or rotary instrumentation associated with photodynamic therapy (PDT) to reduce Enterococcus faecalis using three combinations of light/photosensitizers: toluidine blue O/laser, fuchsin/halogen light and fuchsin/LED. Twenty deciduous molars were selected and contaminated with Enterococcus faecalis (McFarland 0.5 scale). Working length determination was performed by visual method. The teeth were randomly divided into two groups: G1 (n=10): manual instrumentation (Kerr-type files) and G2 (n=10): rotary instrumentation (ProTaper system). The bacteria were collected three times using sterile paper cones compatible with the anatomic diameter of the root canal for 30 s before and after instrumentation and after PDT. The samples were diluted in peptone water, seeded on blood agar plates and incubated in an oven at 37 °C for colony-forming units counting. The decrease of E. faecalis counts after instrumentation and after PDT was compared using the Wilcoxon test, t-test and Kruskal Wallis test. A significant reduction of E. faecalis occurred after manual and rotary instrumentation and after PDT using the three combinations of light/photosensitizer (p<0.05). It may be concluded that both rotary and manual instrumentation reduced E. faecalis. Fuchsin with halogen light or LED irradiation and toluidine blue O with laser irradiation can be used to reduce E. faecalis in root canals of primary molars. PDT can be used as an adjuvant to conventional endodontic treatment.

O objetivo do presente estudo foi avaliar a redução de Enterococcus faecalis após instrumentação manual ou rotatória associada à terapia fotodinâmica (PDT) utilizando 3 combinações luz/fotossensibilizante: azul de toluidina O/laser, fucsina/luz halógena e fucsina/LED. Foram selecionados 20 molares decíduos que foram contaminados com Enterococcus faecalis (escala 0,5 de McFarland). A odontometria foi feita através do método visual. Os dentes foram divididos aleatoriamente em dois grupos: G1 (n=10): instrumentação manual (limas tipo Kerr) e G2 (n=10): instrumentação rotatória (sistema ProTaper). Foram realizadas coletas com cone de papel estéril compatível com o diâmetro anatômico do canal durante 30 s antes e após a instrumentação e a PDT. As amostras foram diluídas em água peptonada, semeadas em placas de agar-sangue e incubadas em estufa a 37 °C para contagem das unidades formadoras de colônias. As comparações antes da redução de E. faecalis após a instrumentação e após a realização da PDT foram realizadas pelo teste de Wilcoxon, teste t e Kruskal Wallis. Houve redução significante de E. faecalis após a instrumentação manual ou rotatória e após realização da PDT com as três combinações de luz/fotossensibilizante (p<0,05). Pode-se concluir que a instrumentação rotatória e manual acarretou a redução de E. faecalis. A fucsina irradiada com luz halógena ou led e o azul de toluidina irradiado com laser podem ser utilizados para redução de E. faecalis do sistema de canais radiculares de molares decíduos. A terapia fotodinâmica pode ser utilizada como coadjuvante ao tratamento endodôntico convencional.

Analysis of Endodontist Posture Utilizing Cinemetry, Surface Electromyography and Ergonomic Checklists

The postural risk factors for dentists include the ease of vision in the workplace, cold, vibration and mechanical pressure in tissues, incorrect posture, functional fixity, cognitive requirements and work-related organizational and psychosocial factors. The objective was to analyze the posture of endodontists at the workplace. Eighteen right-handed endodontists aged 25 to 60 years (34±3) participated in the study. Electromyography, kinemetry, ergonomic scales (RULA and Couto's checklist) and biophotogrammetry were used to analyze the posture of endodontists during root canal treatment of the maxillary right first and second molars using rotary and manual instrumentation. The variations observed in the electromyographic activities during the performance of rotary and manual techniques suggest that the fibers of the longissimus region, anterior and medium deltoid, medium trapezium, biceps, triceps brachii, brachioradialis and short thumb abductor muscles underwent adaptations to provide more accurate functional movements. Computerized kinemetry and biophotogrammetry showed that, as far as posture is concerned, rotary technique was more demanding than the manual technique. In conclusion, the group of endodontists evaluated in this study exhibited posture disorders regardless of whether the rotary or manual technique was used.

Os fatores de risco posturais para cirurgiões dentistas incluem o acesso a visão no local de trabalho, frio, vibração, pressão mecânica nos tecidos, postura incorreta, alterações funcionais, requisitos cognitivos e fatores organizacionais e psicossociais relacionados com o trabalho. O objetivo é analisar a postura dos endodontistas no local de trabalho. Participaram dezoito endodontistas destros com idades entre as idades de 25 e 60 anos (34±3). Nesta pesquisa foi utilizado a eletromiografia, cinemetria, escalas de ergonomia (do RULA e Couto checklist) e biofotogrametria para analisar a postura dos endodontistas durante o preparo químico-mecânico do sistema de canais radiculares para primeiros e segundos molares superiores direitos, utilizando a instrumentação rotatória e manual. As variações observadas nas atividades eletromiográficas durante a execução das técnicas rotatórias e manuais sugerem que as fibras da região dos músculos longuíssimo, deltóide anterior e médio, trapézio médio, bíceps, tríceps braquial, braquiorradial e músculos abdutores curtos do polegar passaram por adaptações para promover movimentos funcionais mais precisos. A cinemetria e biofotogrametria computadorizada mostraram que a técnica rotatória foi mais exigente da postura corporal do que a técnica manual. Em conclusão, os endodontistas estudados apresentaram distúrbios de postura, independentemente da técnica utilizada, rotatória ou manual.

Grado de transportación del canal radicular de tres sistemas de instrumentación rotatoria: estudio a través de tomografía computarizada Cone beam / Degree of root canal transportation of three rotary instrumentation systems: a cone-beam computed tomography study

Introducción: en la preparación del sistema de canales radiculares se debe lograr una conformación progresivamente cónica desde apical hacia coronal, sin generar accidentes de procedimiento. Se define como transportación al cambio de ubicación espacial del canal radicular con respecto a su ubicación original, produciéndose así el desgaste no proporcional de alguna de las paredes dentinarias en relación con la anatomía original de este. Durante la última década, se han fabricado nuevos instrumentos endodónticos rotatorioscon base en níquel-titanio (NiTi), lo que provee mayor flexibilidad y resistencia a la fractura, disminuye el tiempo de trabajo y la fatiga del operador, facilitando así la conformación adecuada del canal y reduciendo accidentes durante los procedimientos.Método: estudio in vitro, de 45 canales radiculares humanos superiores e inferiores con curvaturas severas seleccionados a través de radiografías convencionales. Se formaron 3 grupos de 15 conductos que fueron preparados con los sistemas de instrumentación rotatoria antes mencionados. Se utilizótecnología Cone beam para registro de imágenes previas y posteriores a la instrumentación, las que se tomaron a través de rodetes de siliconaconformando una arcada dentaria con la idea de ser un montaje reproducible posinstrumentación. Se hicieron mediciones en los cortes tomados a los 2, 4, 6, y 8 mm desde el ápice por canal instrumentado, en cada corte se hicieron 4 mediciones, pared vestibular, lingual, furca y cara libre. Los datos obtenidos fueron analizados mediante test Wilcoxon para muestras pareadas y el test ANOVA. Resultados yconclusiones: los resultados indican que el sistema ProTaper Universal (Dentsplay-Maillefer, Switzerland) produce mayor transportación delcanal radicular a nivel del tercio medio en comparación con los sistemas RaCe (FKG-Dentaire, Switzerland) y K3 (SybrondEndo, USA).

Introduction: the preparation of root canals should provide a progressively tapered shape from apical towards coronal, without producing procedural errors. Transportation is defined as the change in location of the root canal with respect to its original position, producing unbalanced wear in any of the dentine walls in relation to their original anatomy. New rotary endodontic instruments have been developed during the latest decade with nickel-titanium (NiTi), a material that provides increased flexibility and fracture strength, reduces working time and operator fatigue, and facilitates proper canal preparation while reducing procedural errors. Method: this wasan in vitro study on 45 upper and lower human root canals with moderate to severe curvatures, selected through conventional radiograph They were sorted out in 3 groups of 15 canals that were prepared with the aforementioned rotary instrumentation systems. The cone beam technology was used to record images before and after instrumentation; these images were obtained by means of a silicon rim that formed a dental arch intended to serve as a post-instrumentation reproducible assembly. Measurements were made in sections taken at 2, 4, 6, and 8 mm from the apex via instrumented canal; four measurements were made in each section: the buccal, lingual, furcation and free side walls. The obtained data were analyzed with the Wilcoxon test for paired samples and the ANOVA test.Results and conclusions: the results suggest that the ProTaper Universal system (Dentsply-Maillefer, Switzerland) produces the most root canal transportation at the middle third compared with the RaCe (FKG-Dentaire, Switzerland) and K3 (SybronEndo, USA) systems. Also, the K3 system showed more conservative wear at 2, 4 and 6 mm of root canal instrumentation, which makes it suitable for instrumenting thin and curved canals.

Instrumentación rotatoria en endodoncia: reporte de casos clínicos / Rotary instrumentation in endodontics: clinical cases report

Los recientes avances en endodoncia de los últimos años, como la introducción de instrumentación rotatoria con limas de Niquel Titanio (NiTi), han simplificado el proceso del tratamiento, mejorando el éxito a largo plazo en términos de tiempo, efectividad y reducción de riesgos, comparados con la instrumentación manual con limas de acero inoxidable. Sin embargo, para algunos clínicos resulta difícil seleccionar el sistema rotatorio NiTi más apropiado, debido a la numerosa cantidad de instrumentos que conforman los diferentes sistemas existentes en el mercado. El presente reporte, basado en casos clínicos de la práctica diaria, tiene como objetivo mostrar, analizar y destacar la posibilidad de realizar tratamientos endodónticos predecibles con la técnica corono apical utilizando el sistema ProTaper Universal.

Advances in recent years in endodontics, such introduction of rotary Niquel Titanium (NiTi) instrumentation have simplified the treatment process and improved the long term success in terms of procedural time, accuracy, and risk reduction compared with the previously used, manual, stainless steel files. However, selecting the most appropriate NiTi system remains difficult for clinicians because of the large number of NiTi rotary instruments available nowadays on the market. This paper aims to show, analyze and emphasize, on the basis of every day clinical practice, the possibility of realizing predictability root canal preparations with the crown down technique of ProTaper Universal system.

Evaluation of cleaning efficacy of a nickel-titanium rotary system, with or without 17% EDTA passive ultrasonic activation: a scanning electron microscopic study

Introduction: The goal of endodontic instrumentation is to promote root canal cleaning and shaping to prepare it for the subsequent three-dimensional filling. Objective: The aim of this study was to evaluate, ex vivo, root canal cleaning ability executed by nickel-titanium rotary system instrumentation and this same system plus ultrasound passive activation of 17% EDTA, through SEM. Material and methods: Seventy upper second single-rooted human bicuspids were used. All teeth presented a single root canal, flattened towards buccal-palatal direction. The teeth were randomly separated into 3 groups. Group 1 (n = 30), had the canals instrumented by using the original operative sequence of ProTaper Universal System, up to instrument #F3. In this group, 5 ml of 5.25% sodium hypochlorite was employed as irrigant, every each instrument change. After group 1 instrumentation, root canals were irrigated with 5 ml of 17% EDTA, which was kept inside the canal for 3 minutes. Next, a final irrigation with 5 ml of 5.25% NaOCl was performed to remove the smear layer in suspension. Group 2 (n = 30) had the canals instrumented by the same system and up to the same instrument size. It was used 5.0 ml of 5.25% NaOCl as irrigant substance every each instrument change. In group 2, however, 17% EDTA (5 ml) was applied through ultrasonic passive activation for 1 minute, and then leaving the substance for 2 minutes within root canal.A final irrigation and with 5.25% NaOCl was also performed. Group 3 (n = 10) was the control group, where the canals were not instrumented and irrigation was executed with saline solution. After that, the teeth were cut into their long axis, metalized and taken for SEM analysis, at x2000 magnification. Each tooth's cervical, middle and apical thirds were observed. The cleaning quality of root canal's walls was observed by the images analyzed by three examiners. Results: Data were statistically analysed by analysis of variance and Tukey test, with a significance level of 5%. The control group showed an average score of the presence of smear layer of 3.41; group 1 (ProTaper) of 2.34; and the group 2 (ProTaper+Ultrassound) of 0.60. Conclusion: None of the studied preparation techniques promoted the total cleaning of the root canal walls. The addition of the ultrasound passive activation, after rotary instrumentation, promoted an increase of the smear layer removal, improving the cleaning of root canal wall. The apical third obtained the smallest cleaning rate, regardless of the technique employed.

Endodontic treatment of a c-shaped mandibular second molar: case report / Tratamento endodôntico de um segundo molar inferior em forma de C: relato de caso

Objectives: To report a clinical case of endodontic treatment of a C-shaped mandibular second molar. Casereport: A patient came to the dental clinic of the Paulista University complaining of pain in tooth 47. Thediagnosis was irreversible pulpitis in which biopulpectomy was recommended. Access was made, and afteridentifying the distal and mesiobuccal canals, the absence of the mesiolingual canal was observed and withthe aid of a surgical operating microscope it was possible to confirm the presence of C-shaped canal. Rotaryinstrumentation with Profile type NiTi files was initiated making a stop up to file #40.04 in the distal canaland up to file #35.04 in the mesial canal. The filling technique performed was thermal compaction usingMcSpadden condenser #45. Conclusion: The case has been followed-up for nine months and the patientdoes not present painful symptomatology, thus indicating the clinical success of the case.

Objetivos: Relatar um caso clínico de tratamento endodôntico de segundo molar inferior em formato de “C”. Relato de caso: Um paciente chegou à clínica odontológica da Universidade Paulista com queixa de dor no dente 47. O diagnóstico foi pulpite irreversível, sendo recomendada a biopulpectomia. O acesso foi realizado e, após identificação dos canais disto e mésio-vestibular e verificação da ausência do canal mésio-lingual, com auxílio de um microscópio cirúrgico foi possível confirmar a presença de um canal em forma de “C”. Foi iniciada instrumentação rotatória com limas tipo NiTi Profile, com parada na lima #40.04 no canal distal e lima #35.04 no canal mesial. A técnica de obturação realizada foi a de compactação térmica utilizando condensador deMcSpadden #45. Conclusão: O caso foi acompanhado durante nove meses, sendo que o paciente não apresentou sintomatologia dolorosa, confirmando, portanto, o sucesso clínico do tratamento.

Comparación microscópica del barro dentinario residual en conductos radiculares, tras instrumentación rotatoria con y sin un quelante viscoso / A Microscopic Comparison of the Residual Smear Layer Remaining in Root Canals, after Rotary Instrumentation with and without a Viscous Chelator

Quelantes de consistencia viscosa son utilizados para ayudar la instrumentación en conductos muy estrechos, no obstante, podrían contribuir al acúmulo de más barro dentinario. El objetivo de este estudio fue comparar el barro dentinario residual tras instrumentar conductos radiculares, con y sin la utilización de un quelante viscoso. 39 incisivos inferiores extraídos fueron instrumentados con Protaper® y divididos en tres grupos. La irrigación de los grupos A y B fue con NaClO 5,25 por ciento entre cada lima. Al terminar la instrumentación se irrigó con EDTA 17 por ciento (1 minuto), luego con NaClO 5,25 por ciento y finalmente con suero fisiológico. Además, en el grupo A se utilizó un quelante viscoso entre cada lima. El grupo C sólo fue irrigado con suero fisiológico. Tres dientes no fueron instrumentados e irrigados (control negativo). Las raíces fueron seccionadas longitudinalmente y divididas en tercios para ser evaluadas bajo microscopía óptica. Los valores de detritus obtenidos fueron analizados con estadística no paramétrica (p<0,05). En cada tercio medio se encontraron valores muy bajos de barro dentinario, siendo iguales en todos los grupos. En cambio en el tercio apical de los grupos A y C se encontró significativamente más barro dentinario que en el grupo B. Conductos instrumentados con la ayuda de un quelante viscoso, acumularon significativamente más barro dentinario.

Viscous chelators are used to help the instrumentation of narrow root canals, however, they could contribute to greater accumulated smear layer. The aim of this study was to compare the smear layer generated following instrumentation with or without the application of a viscous chelator. 39 inferior incisors were instrumented with Protaper® and divided into three groups. Irrigation in group A and B was performed after each instrument was changed, irrigation was realized as follows: EDTA 17 percent (1 minute), then NaOCl 5.25 percent and a final rinse with physiologic saline solution. Also in group A, a viscous chelator was used between each file. Group C irrigation was performed only with physiologic saline solution. Three teeth were not instrumented and irrigated (negative control). The roots were then longitudinally grooved and sectioned by thirds for microscopic evaluation. The detritus score obtained was compared statistically using non-parametric test (p<0.05). In each third very low values of smear layer were found, and were the same in all three groups. In contrast, in the apical third of the groups A and C there was significantly more smear layer than in group B.

Opinião de graduandos após 5 anos de experiência com instrumentos endodônticos rotatórios / Undergraduates' opinion after 5-year experience with rotary endodontic instruments

Introdução: A evolução da odontologia nos últimos anos revolucionou a prática diária em algumas especialidades. Uma dessas revoluções ocorreu na Endodontia devido ao avanço das técnicas rotatórias de preparo do canal radicular e sua posterior incorporação ao ensino dos graduandos de Odontologia. Objetivo: O objetivo deste estudo foi relatar uma experiência de 5 anos na graduação laboratorial e clínica do preparo endodôntico rotatório em uma universidade privada. Material e métodos: O levantamento dos dados foi realizado por meio de um questionário composto por nove questões objetivas; o questionário foi respondido pelos graduandos. Resultados: Os resultados mostraram uma aceitação positiva em relação ao ensino da técnica rotatória na graduação (94,7%). As seguintes vantagens foram destacadas: preparo mais rápido do canal radicular (91,6%) e redução do estresse do paciente (80,9%). Conclusão: Pode-se concluir que a experiência com as duas turmas de graduação foi excelente devido ao alto nível de aceitação da nova técnica pelos alunos

Introduction: Dentistry evolution in the past few years has revolutionized daily practice in some specialties. One of these revolutions has occurred in Endodontics due to the advancement of rotary techniques for root canal preparation and its subsequent incorporation into the teaching of Dentistry undergraduates. Objective: The aim of this study was to report a 5-year experience on the undergraduate laboratorial and clinical use of rotary endodontic preparation at a private university. Material and methods: Data survey was performed by using a questionnaire composed of nine objective questions; the questionnaire was answered by the undergraduates. Results: The results showed a positive acceptance regarding the undergraduate teaching of the rotary technique (94.7%). The following advantages were highlighted: faster root canal preparation (91.6%) and reduction of patient's stress (80.9%). Conclusion: It can be concluded that the experience with the two undergraduate groups was excellent due to the high acceptance level of the new technique by the students

Influence of apical enlargement in cleaning and extrusion in canals with mild and moderate curvatures

Optical microscopy and morphometric analysis were used in this study to evaluate, in vitro, the cleaning of the apical region in root canals with mild or moderate curvatures subjected to biomechanical preparation with a rotary system, as well as to assess the amount of extruded material to the periapical area. Lateral incisors (n = 32), 16 with curvature angles smaller or equal to 10º (GI) and 16 between 11º and 25º angles (GII) were submitted to Hero 642 rotary instrumentation with different surgical diameters: (A) 30.02 and (B) 45.02. Irrigation was performed at each change of instrument with 5 mL of ultrapure Milli-Q water and the extruded material through the apical foramen was collected. Root cross-sections were subjected to histological analysis by optical microscopy (×40) and the images were evaluated morphometrically using the Image Tool software. Quantification of the extruded material was performed by weighing after liquid evaporation. ANOVA showed no statistically significant differences (p>0.05) among the groups with respect to the procedures used to clean the apical region. Considering the amount of extruded material, the Tukey's HSD showed that canals with mild curvature prepared with the 45.02 surgical diameter showed significantly higher values (p<0.05) that those of the other groups, which were similar between themselves (p>0.05). In conclusion, the effect of cleaning the apical region did not differ in the groups, considering root curvature and the surgical diameter of instruments used for apical preparation. The amount of extruded material was greater in canals with mild curvature that were prepared with the 45.02 surgical instrument diameter.

Este estudo avaliou, in vitro, por meio de microscopia óptica e morfometria, a limpeza da região apical em canais radiculares com curvatura leve e moderada submetidos ao preparo biomecânico com sistema rotatório, bem como avaliou a quantidade de material extruído para a área apical. Incisivos laterais (n = 32), sendo 16 com ângulo de curvatura igual ou inferior a 10º (GI) e 16 entre 11º e 25º (GII), foram submetidos à instrumentação rotatória com o sistema Hero 642 com diferentes diâmetros cirúrgicos: (A) 30,02 e (B) 45,02. A irrigação, a cada troca de instrumento, foi realizada com água ultra-pura de Milli Q (5 mL), e o material extruído através do forame apical foi coletado. As raízes foram submetidas a análise histológica sob microscopia óptica (40×) e as imagens foram submetidas à análise morfométrica utilizando o software Image Tool. A quantificação do material extruído foi realizada por pesagem, após a evaporação do líquido. A análise de variância não mostrou diferença estatística significante em relação à limpeza da região apical nos diferentes grupos testados (p>0,05). Considerando a quantidade de material extruído, o teste de T6ukey mostrou que os canais com curvatura leve preparados com o diâmetro cirúrgico 45,02 apresentaram os maiores valores, sendo estatisticamente diferente dos demais grupos (p<0,05) que foram semelhantes entre si (p>0,05). Pode-se concluir que a limpeza da região apical não diferiu entre os diferentes grupos, considerando a curvatura radicular e o diâmetro cirúrgico. A quantidade de material extruído foi maior nos canais preparados com curvatura leve que foram preparados com diâmetro cirúrgico 45,02.

Efficacy of five rotary systems versus manual instrumentation during endodontic retreatment

The purpose of this study was to evaluate the efficiency of ProFile, GT, ProTaper, Race and K3 rotary instruments compared with hand K-files for removal of gutta-percha during retreatment. Sixty mandibular premolars were instrumented with GT rotary files and filled by thermomechanical compaction of gutta-percha and AH Plus sealer. The teeth are randomly divided into 6 groups of 10 specimens each. The roots were split longitudinally, digital images were created using a flatbed scanner, and the areas with remaining filling material were demarcated using Image Tool 1.21 software. The results indicate that GT left significantly less (p<0.05) remaining filling material (1.18 ± 1.47) than hand (3.70 ± 3.16) and Hero instruments (2.99 ± 2.58). There was no statistically significant difference (p<0.05) among the others techniques: ProFile (1.99 ± 2.66), ProTaper (2.00 ± 1.99) and K3 (2.71 ± 2.87) when compared with GT. In conclusion, GT, ProFile, ProTaper and K3 were more effective in removing gutta-percha than manual and Hero instruments.

O propósito deste estudo foi avaliar a eficiência dos instrumentos rotatórios ProFile, GT, ProTaper, Race e K3 comparados com limas K para a remoção do material obturador durante o retratamento. Sessenta pré-molares inferiores foram instrumentados com o sistema rotatório GT e obturados usando a técnica de compactação termomecânica de guta-percha com cimento AH Plus. Os dentes foram divididos aleatoriamente em seis grupos de dez espécimes cada. As raízes foram seccionadas longitudinalmente, imagens digitais foram criadas através de um scanner, e as áreas de remanescentes de material foram medidas usando o programa Image Tool 1.21. Os resultados indicaram que o GT deixou significantemente menos material remanescente (1,18 ± 1,47) do que os instrumentos manuais (3,70 ± 3,16) e os instrumentos Hero (2,99 ± 2,58) (p<0,05). Não houve diferença estatisticamente significante entre as outras técnicas ProFile (1,99 ± 2,66), ProTaper (2,00 ± 1,99) e K3 (2,71 ± 2,87) quando comparadas com o GT. Como conclusão, GT, ProFile, ProTaper e K3 foram revelados como mais efetivos em remover a guta-percha do que os instrumentos manuais e os instrumentos Hero.

Antimicrobial activity of chlorhexidine in root canals instrumented with the ProTaper Universal™ System

Aim: The purpose of the present study was to evaluate the antimicrobial activity of 0.2%, 1%, and2% chlorhexidine in root canals instrumented with the ProTaper Universal™ system. Methods:Fifty human mandibular premolar teeth were infected with a mixture of Candida albicans,Pseudomonas aeruginosa, Enterococcus faecalis and Staphylococcus aureus. The specimens were randomly divided into 5 groups with 10 root canals according to the irrigant used. All root canals were instrumented with the ProTaper Universal™ system. Assessment of the antimicrobial action of the irrigant was performed before, during, and after instrumentation. Data were analyzed statistically by Chi-squared test and the Fisher exact test at 5% significance level. Results: The0.2% chlorhexidine solution was ineffective against all test microorganisms. The 1% chlorhexidinesolution was effective in eliminating P. aeruginosa and C. albicans after the use of the F1 and F3instruments, respectively. The 2% chlorhexidine solution was effective at killing S. aureus, P.aeruginosa and C. albicans after the use of the S1 instrument. There were statistically significant differences (p<0.05) between the concentrations of chlorhexidine and the instruments used.Conclusions: The 0.2% chlorhexidine solution in combination with rotary instrumentation was ineffective against all test microorganisms. The 1% chlorhexidine solution was ineffective against S. aureus and E. faecalis. The 2% chlorhexidine solution was not sufficient to inactivate E.faecalis.

Influence of protaper finishing files and sodium hypochlorite on cleaning and shaping of mandibuldar central incisors: a histological analysis

OBJECTIVE: This study investigated the influence of the last apical instrument of the ProTaper system with and without 2.5% sodium hypochlorite for cleaning mandibular central incisors. MATERIAL AND METHODS: Thirty two mandibular central incisors were divided into six study groups: Group I - F1 instrument with 2.5% sodium hypochlorite; Group II - F1 and F2 with 2.5% sodium hypochlorite; Group III - F1, F2 and F3 with 2.5 percent sodium hypochlorite; Group IV - F1 with distilled water; Group V - F1 and F2 with distilled water; Group VI - F1, F2 and F3 with distilled water. The two remaining teeth comprised the negative control group. The specimens were prepared following the principles of the technique suggested by the manufacturer and then submitted to histological preparation and morphometric analysis. Data were analyzed statistically by the Kruskal Wallis test at 1% significance level. RESULTS: There was statistically significant difference (p<0.01) between all study groups, except between Groups I and VI. CONCLUSIONS: It was concluded that no technique allowed complete cleaning of the root canals. However, the technique of finishing preparation of the apical third with the F3 instrument with 2.5% sodium hypochlorite irrigation was the most effective.

Efectividad de las técnicas rotatoria y oscilatoria en la preparación de conductos radiculares de conformación ovalada / Efetividade das técnicas rotatória e oscilatória no preparo biomecânico de canais radiculares de conformação ovalada / Effectiveness of root canal rotary and oscillatory peraparation techniques in flattened root canals

Este trabajo evaluó la preparación biomecánica de conductos radiculares de conformación ovalada, en cuanto al área de utilización de los instrumentos, se aplicaron cuatro técnicas: instrumentación oscilatoria con instrumentos de acero inoxidable Endo-Eze; instrumentación rotatoria con instrumentos de níquel-titanio del sistema Profile, instrumentación oscilatoria utilizando o sistema Profile, e instrumentación rotatoria con sistema Profile asociada a la instrumentación oscilatoria con sistema Endo-Eze. Fueron utilizadas 40 raíces distales de molares inferiores extraídos. Los especimenes fueron incluidos en resina poliéster cristal incolora, obteniendo un bloque con marcas en la porción externa. La raíz incluida en el bloque de resina fue seccionada de forma que pudiéramos visualizar la porción media del conducto radicular. Los dos cortes del bloque de resina fueron reposicionados, posibilitando la instrumentación de los conductos radiculares. Las imágenes de la superficie inferior de la sección media de cada raíz fueron obtenidas a través de una cámara digital y las imágenes archivadas. Después de la instrumentación, fueron realizadas nuevas fotografías. Las imágenes fueron transferidas para el programa AutoCAD, para que los conductos radiculares fueran trazados y la medición de las áreas de actuación de los instrumentos fuera realizada. Los resultados demostraron que no hubo diferencia estadísticamente significativa entre los grupos, aún haya sido observado un desgaste más uniforme en las paredes dentinarias por la instrumentación con los sistemas Profile y Endo-Eze asociados

This study evaluated the biomechanical preparation of flattened root canals, considering the effective area of instrumentation, using four different techniques: oscillatory instrumentation using Endo-Eze instruments; rotary instrumentation using Profile system; oscillatory instrumentation using Profile system; and rotary instrumentation with Profile system associated to oscillatory instrumentation with Endo-Eze system. A total of 40 distal roots of lower molars were used. These teeth were included in transparent resin blocks and grooves were made in the external portion of the block. The resin block containing the teeth was cut showing the median third of the root. Using a digital camera, the lower portion from the median third of the root were photographed, and the images recorded. After instrumentation, new images were obtained. The images were transferred to AutoCAD, the root canal was demarcated and the root canal area was measured. The results showed no statistically significant difference between the groups. However, a more uniform enlargement was observed in the group where oscillatory and rotary instrumentation were associated

Este trabalho avaliou o preparo biomecânico de canais radiculares de conformação ovalada, quanto à área de atuação dos instrumentos, utilizando quatro técnicas: instrumentação oscilatória com instrumentos de aço inoxidável Endo-Eze; instrumentação rotatória com instrumentos de níquel-titânio do sistema Profile, instrumentação oscilatória utilizando o sistema Profile, e instrumentação rotatória com sistema Profile associada à instrumentação oscilatória com sistema Endo-Eze. Foram utilizadas 40 raízes distais de molares inferiores extraídos. Os espécimes foram incluídos em resina poliéster cristal incolor, obtendo-se um bloco com marcas na porção externa. A raiz incluída no bloco de reina foi seccionada de forma a visualizarmos a porção média do canal radicular. Os dois cortes do bloco de resina foram reposicionados, possibilitando a instrumentação dos canais radiculares. As imagens da superfície inferior da secção média de cada raiz foram obtidas através de uma câmera digital e as imagens arquivadas. Após a instrumentação, foram realizadas novas fotografias. As imagens foram transferidas para o programa AutoCAD, para q os canais radiculares fossem traçados e a mensuração das áreas de atuação dos instrumentos fosse realizada. Os resultados demonstraram que não houve diferença estatisticamente significante entre os grupos, embora tenha sido observado um desgaste mais uniforme nas paredes dentinárias pela instrumentação com os sistemas Profile e Endo-Eze associados

Change of working length in curved canals by various instrumentation techniques / 대한치과보존학회지

To evaluate the change of working length with various instrumentation techniques in curved canals, working length and canal curvature were determined before and after canal instrumentation in buccal or mesial canals of extracted human molars. Stainless steel K-files (MANI(R), Matsutani Seisakusho Co. Takanezawa, Japan), nickel-titanium K-files (Naviflex NT(TM), Brassler, Savannah, USA), ProFile(R), and ProTaper(TM) (Dentsply-Maillefer, Ballaigues, Switzerland) were used to prepare the canals with crown-down technique. In two hand instrumentation groups, coronal flaring was made with Gates Glidden burs. Apical canals were instrumented until apical diameter had attained a size of 30. Positional relation between the tooth apex and the #10 K-file tip was examined by using AutoCAD 2000 (Autodesk Corp., San Rafael. CA, USA) under a stereomicroscope before and after coronal flaring, and after apical instrumentation. Degree of canal curvature was also measured with Schneider's method in radiographs. Data of working length and canal curvature changes were statistically analyzed with one-way ANOVA and Tukey's studentized range test. Working length and canal curvature were decreased significantly in each step in all instrumentation groups. Coronal flaring using Gates Glidden burs in hand instrument groups and whole canal instrumentation using stainless steel hand K-files caused significantly more working length change than in ProFile instrumentation group (p < 0.05). The result of this study demonstrates that all of the above kinds of instrumentation in curved canals cause reduction of working length and canal curvature at each instrumentation steps, and hand instrumentation causes more working length change than ProFile.