Solar evaporation of liquid marbles with Fe3O4/CNT hybrid nanostructures.

HYPOTHESIS: Through the rational design of nanomaterial composites, broadband light harvesting and good thermal insulation can be achieved simultaneously to improve the efficiency of water evaporation. EXPERIMENT: Solar evaporation experiments were carried out on liquid marbles (LMs) coated with Fe3O4 nanoparticles, carbon nanotubes (CNTs) and hybrid nanomaterials (Fe3O4/CNTs) with different mass ratios of 2:1, 1:1 and 1:2. FINDING: The results showed that the mixture of Fe3O4/CNTs enhances the light harvesting ability and solar interfacial evaporation performance. Fe3O4/CNT-LM at the mass ratio of 2:1 case provides the highest evaporation rate of 11.03 µg/s, which is about 1.22 and 1.34 times higher than that of Fe3O4 and CNT, respectively. This high performance is mainly due to the synergistic effect between Fe3O4 nanoparticles and CNTs, as the hybrid nanostructure significantly improves the both photothermal conversion and heat localization capability. Numerical simulation further supports that the composite can concentrate the electromagnetic field and heat at the phase-change interface. This leads to a rapid evaporation of the boundary region. This study provides a novel approach to a three-dimensional interface by assembling nanomaterials on the drop surface to enhance evaporation, which may have far-reaching implications for seawater desalination.

Sensitive visual detection of norfloxacin in water by smartphone assisted colorimetric method based on peroxidase-like active cobalt-doped Fe3O4 nanozyme.

Norfloxacin is widely used owing to its strong bactericidal effect on Gram-negative bacteria. However, the residual norfloxacin in the environment can be biomagnified via food chain and may damage the human liver and delay the bone development of minors. Present work described a reliable and sensitive smartphone colorimetric sensing system based on cobalt-doped Fe3O4 magnetic nanoparticles (Co-Fe3O4 MNPs) for the visual detection of norfloxacin. Compared with Fe3O4, Co-Fe3O4 MNPs earned more remarkably peroxidase-like activity and TMB (colorless) was rapidly oxidized to oxTMB (blue) with the presence of H2O2. Interestingly, the addition of low concentration of norfloxacin can accelerate the color reaction process of TMB, and blue deepening of the solution can be observed with the naked eye. However, after adding high concentration of norfloxacin, the activity of nanozyme was inhibited, resulting in the gradual fading of the solution. Based on this principle, a colorimetric sensor integrated with smartphone RGB mode was established. The visual sensor exhibited good linearity for norfloxacin monitoring in the range of 0.13-2.51 µmol/L and 17.5-100 µmol/L. The limit of visual detection was 0.08 µmol/L. In the actual water sample analysis, the spiked recoveries of norfloxacin were over the range of 95.7%-104.7 %. These results demonstrated that the visual sensor was a convenient and fast method for the efficient and accurate detection of norfloxacin in water, which may have broad application prospect.

Recycling Fe and improving organic pollutant removal via in situ forming magnetic core-shell Fe3O4@CaFe-LDH in Fe(II)-catalyzed oxidative wastewater treatment.

Due to its high efficiency, Fe(II)-based catalytic oxidation has been one of the most popular types of technology for treating growing organic pollutants. A lot of chemical Fe sludge along with various refractory pollutants was concomitantly produced, which may cause secondary environmental problems without proper disposal. We here innovatively proposed an effective method of achieving zero Fe sludge, reusing Fe resources (Fe recovery = 100%) and advancing organics removal (final TOC removal > 70%) simultaneously, based on the in situ formation of magnetic Ca-Fe layered double hydroxide (Fe3O4@CaFe-LDH) nano-material. Cations (Ca2+ and Fe3+) concentration (≥ 30 mmol/L) and their molar ratio (Ca:Fe ≥ 1.75) were crucial to the success of the method. Extrinsic nano Fe3O4 was designed to be involved in the Fe(II)-catalytic wastewater treatment process, and was modified by oxidation intermediates/products (especially those with COO- structure), which promoted the co-precipitation of Ca2+ (originated from Ca(OH)2 added after oxidation process) and by-produced Fe3+ cations on its surface to in situ generate core-shell Fe3O4@CaFe-LDH. The oxidation products were further removed during Fe3O4@CaFe-LDH material formation via intercalation and adsorption. This method was applicable to many kinds of organic wastewater, such as bisphenol A, methyl orange, humics, and biogas slurry. The prepared magnetic and hierarchical CaFe-LDH nanocomposite material showed comparable application performance to the recently reported CaFe-LDHs. This work provides a new strategy for efficiently enhancing the efficiency and economy of Fe(II)-catalyzed oxidative wastewater treatment by producing high value-added LDHs materials.

Targeted Delivery of 2D Composite Minerals for Biofilm Removal.

Microbiologically influenced corrosion (MIC) poses considerable challenges in various industries, prompting the exploration of advanced materials to mitigate microbial threats. This study successfully synthesized nanoscale vermiculite (VMT) from natural seawater and utilized it as a foundation to integrate magnetic nanoparticles (Fe3O4) and chlorhexidine acetate (CA) for inhibiting MIC. A comprehensive investigation encompassing the synthesis, characterization, and application of these VMT/Fe3O4/CA composites was conducted to evaluate their antimicrobial effectiveness against Escherichia coli, Staphylococcus aureus, and sulfate-reducing bacteria (SRB), demonstrating an efficacy exceeding 99.5%. Moreover, the composite material demonstrated the capability to align with a magnetic field, enabling precise drug targeting and release, thereby facilitating biofilm removal. This research makes a significant contribution to the advancement of intelligent, efficient, and eco-friendly corrosion protection solutions.

A New Powerful Magnetic Dark Catalyst Based on rGO/Fe3O4/CdSe Nanocomposite for Ultrafast Degradation of Methylene Blue Dye.

In the present study, Rgo/Fe3O4/CdSe as a dark catalyst material was synthesized by a refluxing method. The synthesized magnetic nanocomposites were studied by various analyses such as Fourier transform infrared (FTIR), energy-dispersive X-ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), X-ray diffractometer (XRD), Raman, Zeta and vibrating sample magnetometer (VSM). Characterization of structural analysis showed that the nanocomposites were successfully synthesized. The absorption spectrum was used to determine the dark catalyst activity of rGO/Fe3O4/CdSe nanocomposite. Analysis of the absorption spectrum showed that the prepared nanocomposites degrade the MB organic dye completely (100%) after 2 min of stirring in the dark, also experimenting with different pH showed that the best performance for the degradation of MB occurs in neutral and alkaline media. The Raman spectrum analysis showed that the Fe3O4/CdSe quantum dots (QDs) were correctly incorporated on the reduced graphene oxide (rGO) nanosheets. Zeta potential analysis showed that rGO/Fe3O4/CdSe has a large amount of negative charge on its surface and the surface charge increased by about 16 mV compared to the Fe3O4/CdSe compound. BET and BJH techniques were used to determine the effective surface area and pore size diameter, BET results to determine the effective surface area showed that by adding graphene to the compound, the specific surface area increased from 42.877 m2g-1 to 54.1896 m2g-1. The radical scavenger experiment showed that electrons play an essential role in the degradation process. VSM analysis showed that the prepared nanocomposites have excellent superparamagnetic behavior, this advantage enables the easy collection of nanocatalysts by magnets from wastewater after dye degradation.

Characterization optimization of synthesis Chitosanclay/benzoin/Fe3O4 composite for adsorption of Thionine dye by design expert study.

A novel composite material, magnetic chitosan-clay/benzoin/Fe3O4 (CS-CY/Benz/Fe3O4), was synthesized for effectively removing thionine dye (TH) from water solutions. The structural integrity and suitability of CS- CY/Benz/Fe3O4 composite for adsorption purposes were validated through extensive characterization techniques including BET, XRD, FTIR, and SEM. The adsorption efficiency was optimized through a Box-Behnken design (BBD) employing response surface methodology (RSM), focusing on variables such as adsorbent dose (A: 0.02-0.08 g), solution pH (B: 4-10), temperature (C: 30-60 °C), and time (D: 5-30 min). Experimental results revealed a maximum TH removal of 99% with significant interactions between temperature (C) and time (D) (p-value = 0.0001). The optimal conditions for TH removal were determined as pH ~ 5.91, adsorbent dosage of 0.08 g, temperature of 54.34 °C, and time of 29.7 min. The investigation of kinetics revealed that the adsorption process conformed to a pseudo-second-order (PSO) model, while the equilibrium data were effectively described by the Freundlich isotherm model. At a temperature of 333.15 K and a TH concentration of 350 mg/L, the adsorption capacity was determined to be 660.86 mg/g. The mechanism of adsorption encompassed various interactions such as electrostatic attractions, n-π interactions, hydrogen bonding, and Yoshida H-bonding. Particularly, the CS-CY/Benz/Fe3O4 composite demonstrated strong magnetic responsiveness, enabling straightforward separation from water using an external magnetic field after adsorption. Particularly, the CS-CY/Benz/Fe3O4 composite demonstrated strong magnetic responsiveness, enabling straightforward separation from water using an external magnetic field after adsorption. This research contributes important findings to the advancement of magnetic chitosan-based composites for efficient removal of TH dye pollutants from water environments.

Ultrasound-responsive nanocarriers with siRNA and Fe3O4 regulate macrophage polarization and phagocytosis for augmented non-small cell lung cancer immunotherapy.

The immunosuppressive tumor microenvironment (TME) significantly inhibits the effective anti-tumor immune response, greatly affecting the efficacy of immunotherapy. Most tumor-associated macrophages (TAMs) belong to the M2 phenotype, which contributes significantly to the immunosuppressive effects in non-small cell lung cancer (NSCLC) TME. The interaction between signal regulatory protein α (SIRPα) expressed on macrophages and CD47, a transmembrane protein overexpressed on cancer cells, activates the "eat-me-not" signaling pathway, inhibiting phagocytosis. In this study, a folic acid (FA)-modified ultrasound responsive gene/drugs delivery system, named FA@ PFP @ Fe3O4 @LNB-SIRPα siRNA (FA-PFNB-SIRPα siRNA), was developed using 1,2-dioleoacyl-3-trimethylammonium-propane (DOTAP), FA-1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N- [amino (polyethylene glycol)2000] (DSPE-PEG2000-FA), cholesterol, and perfluoropentane (PFP), for the delivery of siRNA encoding SIRPα mRNA and immune adjuvant Fe3O4 nanoparticles. Under ultrasound conditions, the nanobubbles effectively transfected macrophages, inhibiting SIRPα mRNA and protein expression, promoting the phagocytosis of TAMs, and synergistically reversing M2 polarization. This system promotes the infiltration of T cells, enhances the proliferation and activation of cytotoxic T cells, and inhibits the infiltration of immunosuppressive cells in tumor tissues. Administration of FA-PFNB-SIRPα siRNA combined with ultrasound significantly inhibits NSCLC progression. The study highlights the potential of ultrasound nanotechnology-enabled delivery of SIRPα siRNA and Fe3O4 as an effective strategy for macrophage-based immunotherapy to reshape the immunosuppressive TME for cancer therapy.

Ultrasound-Responsive Nanocarriers Delivering siRNA and Fe3O4 Nanoparticles Reprogram Macrophages and Inhibit M2 Polarization for Enhanced NSCLC Immunotherapy.

Lung cancer has emerged as the second most common type of malignant tumor worldwide, and it has the highest mortality rate. The overall 5-year survival rate stands at less than 20%, which is primarily related to the limited therapeutic options and the complexity of the tumor immune microenvironment. In the tumor microenvironment, M1 macrophages are known for their tumor-killing capabilities. Although they are less numerous, they play an important role in tumor immunity. Therefore, increasing M1 macrophages' presence is considered a strategy to enhance targeted phagocytosis and antitumor efficacy in nonsmall cell lung cancer (NSCLC). This study introduces the development of folic acid (FA)-conjugated liposomal nanobubbles for precise delivery of PFH, STAT3 siRNA, and Fe3O4 to the tumor microenvironment. These encapsulated PFH liposomal nanobubbles exhibit significant visualization potential and underwent phase transition when exposed to low-intensity focused ultrasound (LIFU). The release of Fe3O4 activates the IRF5 signaling pathway, converting M2-like macrophages to M1. In addition, STAT3 siRNA effectively interrupts the JAK-STAT3 pathway, inhibiting the polarization of M2-like macrophages in tumor-associated macrophages (TAMs). This dual-action therapy facilitates T-cell activation and proliferation, thereby enhancing the immune response against NSCLC.

Nanorobot Swarms Made with Laser-Induced Graphene@Fe3O4 Nanoparticles with Controllable Morphology for Targeted Drug Delivery.

Magnetic nanorobot swarms can mimic group behaviors in nature and can be flexibly controlled by programmable magnetic fields, thereby having great potential in various applications. This paper presents a novel approach for the rapid and large-scale processing of laser-induced graphene (LIG) @Fe3O4-based-nanorobot swarms utilizing one-step UV laser processing technology. The swarm is capable of forming a variety of reversible morphologies under the magnetic field, including vortex-like and strip-like, as well as the interconversion of these, demonstrating high levels of controllability and flexibility. Moreover, the maximum forward motion speed of the nanorobot swarm is up to 2165 µm/s, and the drug loading and release ability of such a nanorobot swarm is enhanced about 50 times due to the presence of graphene, enabling the nanorobot swarm to show rapid and precise targeted drug delivery. Importantly, by controllable morphology transformation to conform to the complicated requirements for the magnetic field, the drug-loaded swarm can smoothly pass through a width-varying zigzag channel while maintaining 96% of the initial drug-loading, demonstrating that LIG @Fe3O4 NPs-based nanorobot swarm can provide effective and controllable targeted drug delivery in complex passages.

Enhancing bone regeneration: Unleashing the potential of magnetic nanoparticles in a microtissue model.

Bone tissue engineering addresses the limitations of autologous resources and the risk of allograft disease transmission in bone diseases. In this regard, engineered three-dimensional (3D) models emerge as biomimetic alternatives to natural tissues, replicating intracellular communication. Moreover, the unique properties of super-paramagnetic iron oxide nanoparticles (SPIONs) were shown to promote bone regeneration via enhanced osteogenesis and angiogenesis in bone models. This study aimed to investigate the effects of SPION on both osteogenesis and angiogenesis and characterized a co-culture of Human umbilical vein endothelial cells (HUVEC) and MG-63 cells as a model of bone microtissue. HUVECs: MG-63s with a ratio of 4:1 demonstrated the best results among other cell ratios, and 50 µg/mL of SPION was the optimum concentration for maximum survival, cell migration and mineralization. In addition, the data from gene expression illustrated that the expression of osteogenesis-related genes, including osteopontin, osteocalcin, alkaline phosphatase, and collagen-I, as well as the expression of the angiogenesis-related marker, CD-31, and the tube formation, is significantly elevated when the 50 µg/mL concentration of SPION is applied to the microtissue samples. SPION application in a designed 3D bone microtissue model involving a co-culture of osteoblast and endothelial cells resulted in increased expression of specific markers related to angiogenesis and osteogenesis. This includes the design of a novel biomimetic model to boost blood compatibility and biocompatibility of primary materials while promoting osteogenic activity in microtissue bone models. Moreover, this can improve interaction with surrounding tissues and broaden the knowledge to promote superior-performance implants, preventing device failure.

Spin Transport Modulation of 2D Fe3O4 Nanosheets Driven by Verwey Phase Transition.

Realizing spin transport between heavy metal and two-dimensional (2D) magnetic materials at high Curie temperature (TC) is crucial to advanced spintronic information storage technology. Here, environmentally stable 2D nonlayered Fe3O4 nanosheets are successfully synthesized using a reproducible process and found that they exhibit vortex magnetic domains at room temperature. A Verwey phase transition temperature (TV) of ≈110 K is identified for ≈3 nm thick nanosheet through Raman characterization and spin Hall device measurement of the Pt/Fe3O4 bilayer. The anisotropic magnetoresistance ratio decreases near TV, while both the spin Hall magnetoresistance ratio and spin mixing conductance (Gr) increase at TV. As the temperature approaches 112 K, the anomalous Hall effect ratio tends to become zero. The maximum Gr reaches ≈5 × 1015 Ω-1m-2 due to the clean and flat interface between Pt and 2D nanosheet. The observed spin transport behavior in Pt/Fe3O4 spin Hall devices indicates that 2D Fe3O4 nanosheets possess potential for high-power micro spintronic storage devices applications.

An Approach to Apply BDNF Targeting Fe3O4-Based Nanoparticles as Multifunctional Anti-Alzheimer Agents.

To search for novel anti-Alzheimer agents, multifunctional Fe3O4-based nanoparticles (FSSIO) is designed and prepared which contain ferulic acid (FA) and Simvastatin linked to the surface of Fe3O4 particles. In vitro tests confirmed that FSSIO possessed favorable biocompatibility and a pronounced ability to penetrate blood brain barrier. The FA moiety endowed the particles with remarkable antioxidant and anti-inflammatory properties, and effectively protected neuron cells from the toxicity induced by Aß. Moreover, the Simvastatin pharmacophore assists the particles up-regulate the expression level of BDNF and significantly promotes the expression levels of p-TrkB, p-ERK, p-PI3K and Akt, which consequently leads to the neurite outgrowth via regulating PI3K/ATK and TrkB-mediated signaling pathway. More importantly, in the Morris water maze test, FSSIO shows excellent activity to enhance the learning and memory retention of AD model rats.

A Raman measurement scheme for accurate compositional analysis of dark-colored sample by minimizing laser-induced sample degradation: Determination of Fe3O4 concentration in sintered ores.

An effective and rapid Raman measurement scheme to determine Fe3O4 concentration in sintered ores was explored. Because sintered ores are brownish-black materials that easily absorb laser photons, accurate quantitative analysis requires obtaining an Fe3O4 peak with a high signal-to-ratio by reducing the possibility of local sample heating and degradation. For this purpose, a wide area coverage (WAC) Raman scheme with a laser-illumination diameter of 1 mm was adopted to decrease the laser power per area (LP/A) on each sample. The sintered ore sample was also wetted with water to reduce the chance of further heating by the laser. The combination of the WAC scheme and water-wetting allowed to increase the laser power during sample measurement, and the subsequent intensity (as well as the signal-to-noise ratio) of the Fe3O4 peak was elevated compared with both that measured by a Raman microscope yielding a higher LP/A and without water-wetting of the sample. In the Raman spectra of 93 real sintered ore samples measured using the proposed scheme, the ratio of Fe3O4 and Fe2O3 peak areas correlated closely (R2 = 0.94) with Fe3O4 concentration determined by titration. The demonstrated scheme is practical when Raman spectroscopy is employed for compositional analysis of dark and highly photon-absorbing samples.

Long-term and multiscale assessment of methanogenesis enhancement mechanisms in magnetite nanoparticle-mediated anaerobic digestion reactor.

Magnetite nanoparticles (Fe3O4-NPs) have been demonstrated to be involved in direct interspecies electron transfer between syntrophic bacteria, yet a comprehensive assessment of the ability of Fe3O4-NPs to cope with process instability and volatile fatty acids (VFAs) accumulation in scaled-up anaerobic reactors is still lacking. Here, we investigated the start-up characteristics of an expanded granular sludge bed (EGSB) with Fe3O4-NPs as an adjuvant at high organic loading rate (OLR). The results showed that the methane production rate of R1 (with Fe3O4-NPs) was approximately 1.65 folds of R0 (control), and effluent COD removal efficiency was maintained at approximately 98.32% upon 20 kg COD/(m3·d) OLR. The components of volatile fatty acids are acetate and propionate, and the rapid scavenging of propionate accumulation was the difference between R1 and the control. The INT-ETS activity of R1 was consistently higher than that of R0 and R2, and the electron transfer efficiencies increased by 68.78% and 131.44%, respectively. Meanwhile, the CV curve analysis showed that the current of R1 was 40% higher than R3 (temporary addition of Fe3O4-NPs), indicating that multiple electron transfer modes might coexist. High-throughput analysis further revealed that it was difficult to reverse the progressive deterioration of system performance with increasing OLR by simply reconfiguring bacterial community structure and abundance, demonstrating that the Fe3O4-NPs-mediated DIET pathway is a prerequisite for establishing multiple electron transfer systems. This study provides a long-term and multi-scale assessment of the gaining effect of Fe3O4-NPs in anaerobic digestion scale-up devices, and provides technical support for their practical engineering applications.

Efficient photocatalysis activation for reactive red 195 degradation by magnetic MIL-53(Fe)/Fe3O4@TiO2 hybrid nanocomposite.

The study investigated the performance of a novel magnetic hybrid MIL-53(Fe)/Fe3O4@TiO2 composite for removing reactive red 195 (RR195) dye from water using UVc light. Various analytical techniques were used to characterize the nanocomposite materials. X-ray diffraction analysis confirmed the presence of MIL-53(Fe) and TiO2 in the composite. FT-IR analysis identified carboxyl and Ti-O-Ti groups in the photocatalyst structure. The study evaluated the effects of pH, dye concentration, photocatalyst dosage, and temperature on RR195 photodegradation. The Langmuir-Hinshelwood kinetic model provided the best fit for the reaction rate. Optimal conditions for an 84 % dye degradation were found at a photocatalyst dose of 15 mg/100 mL, pH 3, dye concentration of 100 mg/L, and 35 °C after 120 minutes of UVc light exposure. Thermodynamic analysis indicated an endothermic reaction with positive values for Δ#H and negative values for Δ#S. The MIL-53(Fe)/Fe3O4@TiO2 composite demonstrated excellent stability and achieved over 90 % dye degradation after five cycles. Overall, the composite shows promise for treating wastewater with dyes.

A Template Method Leads to Precisely Synthesize SiO2@Fe3O4 Nanoparticles at the Hundred-Nanometer Scale.

Constructing photonic crystals with core-shell structured nanoparticles is an important means for applications such as secure communication, anti-counterfeiting marking, and structural color camouflage. Nonetheless, the precise synthesis technology for core-shell structured nanoparticles at the hundred-nanometer scale faces significant challenges. This paper proposes a controlled synthesis method for core-shell structured nanoparticles using a template method. By using 100 nm diameter silica nanospheres as templates and coating them with a ferroferric oxide shell layer, SiO2@Fe3O4 core-shell structured nanoparticles with regular morphology and good uniformity can be obtained. The study experimentally investigated the effects of feed amount, modifiers, temperature, and feed order on the coating effect, systematically optimizing the preparation process. Centrifugal driving technology was used to achieve structural colors in the visible wavelength range. Additionally, the method successfully created well-defined and uniform core-shell structured nanoparticles using 200 nm diameter silica nanospheres as templates, demonstrating that this controllable synthesis method can effectively produce core-shell structured nanoparticles over a wide range of particle sizes. The template method proposed in this paper can significantly improve morphological regularity and size uniformity while effectively reducing the preparation cost of core-shell structured nanoparticles.

Preparation and Thermal Properties of Magnetic PW@CaCO3@Fe3O4 Phase-Change Microcapsules and Their Application to Textile Fabrics.

Multifunctional thermal regulation materials with good thermal properties, efficient magnetic performance, and satisfactory interface bonding on fabrics are highly desirable for protective fabrics, building winter protection materials, medical thermal regulation materials, and special-environment work clothing. Herein, a new class of magnetic phase-change PW@CaCO3@Fe3O4 microcapsules was successfully produced by controlling the content of magnetic Fe3O4 through a self-assembly method. The microstructure, chemical composition, phase-change behavior, and magnetic properties of the products were sequentially characterized and analyzed. The findings revealed that the obtained microcapsules possessed regular spherical structure with uniform size and excellent thermal properties. Furthermore, PW@CaCO3 with Fe3O4 (i.e., 8% mass fraction) showed the highest thermal regulation and magnetic properties and reached an enthalpy value of 94.25 J·g-1, which is clearly superior to the value of 77.51 J·g-1 for PW@CaCO3 microcapsules. At the same time, the encapsulation efficiency of 38.7% and saturation magnetization of 2.50 emu·g-1 were the best among the four given samples. Therefore, the good paramagnetic feature had a significant synergistic effect on the thermal properties of the PW@CaCO3 microcapsules under study. More importantly, multifunctional fabrics loaded with PW@CaCO3@Fe3O4 microcapsules still showed an enthalpy value of 25.81 J·g-1 after several washes and have the potential to be used widely in the field of temperature control. The thermal regulation fabrics in this study exhibited excellent thermal properties and fastness, which contribute to their practical applications in advancing multifunctional textiles and high-technology modern fabrics.

Fe3O4@gC3N4@Thiamine: a novel heterogeneous catalyst for the synthesis of heterocyclic compounds and microextraction of tebuconazole in food samples.

Graphite carbon nitride (g-C3N4) is a two-dimensional nano-sheet with electronic properties, which shows unique characteristics with high chemical and thermal stability in its structure. The functionalization of these compounds through covalent bonding is an important step towards significantly improving their properties and capabilities. To achieve this goal, a novel strategy for the covalent functionalization of Fe3O4@g-C3N4 with thiamine hydrochloride (vitamin B1) via cyanuric chloride (TCT), which is a divalent covalent linker, was presented. The efficiency of Fe3O4@gC3N4@Thiamine as a heterogeneous organic catalyst in the synthesis of spirooxindole-pyran derivatives and 2-amino-4H-pyran under solvent-free conditions was evaluated and the yields of high-purity products were presented. In addition, easy recycling and reuse for seven consecutive cycles without significant reduction in catalytic activity are other features of this catalyst. Moreover, the performance of the prepared sorbent in the microextraction technique (herein, magnetic solid phase extraction) was studied. The tebuconazole was selected as the target analyte. The target analyte was extracted and determined by HPLC-UV. Under the optimum condition, the linear range of the method (LDR) was estimated in the range of 0.2-100 µg L-1 (the coefficient of determination of 0.9962 for tebuconazole). The detection limit (LOD) of the method for tebuconazole was calculated to be 0.05 µg L-1. The limit of quantification (LOQ) of the method was also estimated to be 0.16 µg L-1. In order to check the precision of the proposed method, the intra-day and inter-day relative standard deviations (RSD%) were calculated, which were in the range of 1.5- 2.8%. The method was used for the successful extraction and determination of tebuconazole in tomato, cucumber, and carrot samples.

Mechanistic insights into Fe3O4-mediated inhibition of H2S gas production in sludge anaerobic digestion.

The addition of iron-based conductive materials has been extensively validated as a highly effective approach to augment methane generation from anaerobic digestion (AD) process. In this work, it was additionally discovered that Fe3O4 notably suppressed the production of hazardous H2S gas during sludge AD. As the addition of Fe3O4 increased from 0 to 20 g/L, the accumulative H2S yields decreased by 89.2 % while the content of element sulfur and acid volatile sulfide (AVS) respectively increased by 55.0 % and 30.4 %. Mechanism analyses showed that the added Fe3O4 facilitated sludge conductive capacity, and boosted the efficiency of extracellular electron transfer, which accelerated the bioprocess of sulfide oxidation. Although Fe3O4 can chemically oxidize sulfide to elemental sulfur, microbial oxidation plays a major role in reducing H2S accumulation. Moreover, the released iron ions reacted with soluble sulfide, which promoted the chemical equilibrium of sulfide species from H2S to metal sulfide. Microbial analysis showed that some SRBs (i.e., Desulfomicrobium and Defluviicoccus) and SOB (i.e., Sulfuritalea) changed into keystone taxa (i.e., connectors and module hubs) in the reactor with Fe3O4 addition, showing that the functions of sulfate reduction and sulfur oxidation may play important roles in Fe3O4-present system. Fe3O4 presence also increased the content of functional genes encoding sulfide quinone reductase and flavocytochrome c sulfidedehydrogenase (e.g., Sqr and Fcc) that could oxidize sulfide to sulfur. The impact of other iron-based conductive material (i.e., zero-valent iron) was also verified, and the results showed that it could also significantly reduce H2S production. These findings provide new insights into the effect of iron-based conductive materials on anaerobic process, especially sulfur conversion.

Size-dependent As(V) adsorption of reduced graphene oxide/magnetite nanocomposites.

Arsenic (As(V)) contamination in aqueous resources poses a significant environmental, and public health risk due to its high toxicity. To address this challenge, we synthesized and characterized novel reduced graphene oxide/magnetite (rGO/Fe3O4) nanocomposites, which are efficient adsorbents for removing As(V). Using a co-precipitation method, we obtained three distinct sizes of rGO/Fe3O4 nanocomposites by controlling the salt concentration (Fe2+: Fe3+) ratios. Analysis of the adsorption ability of the samples shows that the adsorption efficiency can reach up to 98.10% within 90 min, and the adsorption capacity value reaches 20.55 mg/g. Furthermore, these test data are ably consistent with both the pseudo-second-order model and the Langmuir model, based on which the adsorption mechanism has been proposed. These results show that the rGO/Fe3O4 nanocomposites that we synthesized are a potential adsorbent for the removal of heavy metals from water.