RESUMEN
Supported metal single atom catalysis is a dynamic research area in catalysis science combining the advantages of homogeneous and heterogeneous catalysis. Understanding the interactions between metal single atoms and the support constitutes a challenge facing the development of such catalysts, since these interactions are essential in optimizing the catalytic performance. For conventional carbon supports, two types of surfaces can contribute to single atom stabilization: the basal planes and the prismatic surface; both of which can be decorated by defects and surface oxygen groups. To date, most studies on carbon-supported single atom catalysts focused on nitrogen-doped carbons, which, unlike classic carbon materials, have a fairly well-defined chemical environment. Herein we report the synthesis, characterization and modeling of rhodium single atom catalysts supported on carbon materials presenting distinct concentrations of surface oxygen groups and basal/prismatic surface area. The influence of these parameters on the speciation of the Rh species, their coordination and ultimately on their catalytic performance in hydrogenation and hydroformylation reactions is analyzed. The results obtained show that catalysis itself is an interesting tool for the fine characterization of these materials, for which the detection of small quantities of metal clusters remains a challenge, even when combining several cutting-edge analytical methods.
RESUMEN
Ru and Rh nanoparticles catalyze the selective H/D exchange in phosphines using D2 as the deuterium source. The position of the deuterium incorporation is determined by the structure of the P-based substrates, while activity depends on the nature of the metal, the properties of the stabilizing agents, and the type of the substituent on phosphorus. The appropriate catalyst can thus be selected either for the exclusive H/D exchange in aromatic rings or also for alkyl substituents. The selectivity observed in each case provides relevant information on the coordination mode of the ligand. Density functional theory calculations provide insights into the H/D exchange mechanism and reveal a strong influence of the phosphine structure on the selectivity. The isotope exchange proceeds via C-H bond activation at nanoparticle edges. Phosphines with strong coordination through the phosphorus atom such as PPh3 or PPh2Me show preferred deuteration at ortho positions of aromatic rings and at the methyl substituents. This selectivity is observed because the corresponding C-H moieties can interact with the nanoparticle surface while the phosphine is P-coordinated, and the C-H activation results in stable metallacyclic intermediates. For weakly coordinating phosphines such as P(o-tolyl)3, the interaction with the nanoparticle can occur directly through phosphine substituents, and then, other deuteration patterns are observed.
RESUMEN
Here, we report a simple procedure that drastically reduces the electrochemical E(FeI/Fe0) and E0cat of the commercially available iron(III) tetraphenylporphyrin chloride (FeIIITPP·Cl) catalyst via a synergetic effect with the imidazolium dications of the ionic liquid electrolyte. This procedure enhanced the performance of catalytic systems in the electrochemical production of CO and enabled us to perform different tandem CO2 reduction-carbonylation reactions under mild conditions.
RESUMEN
The successful rhodium-catalyzed asymmetric hydroformylation and hydroaminomethylation of α-substituted acrylamides is described using 1,3-phosphite-phosphoramidite ligands based on a sugar backbone. A broad scope of chiral aldehydes and amines were afforded in high yields and excellent enantioselectivities (up to 99%). Furthermore, the synthetic potential of this method is demonstrated by the single-step synthesis of the brain imaging molecule RWAY.
RESUMEN
In the present work, hollow PdAg-CeO2 heterodimer nanocrystals (NCs) were prepared and tested as catalysts for the selective hydrogenation of alkynes. These nanostructures combine for the first time the beneficial effect of alloying Pd with Ag in a single NC hollow domain with the formation of active sites at the interface with the CeO2 counterpart in an additive manner. The PdAg-CeO2 NCs display excellent alkene selectivity for aliphatic alkynes. For the specific case of hydrogenation of internal alkynes such as 4-octyne, very low over-hydrogenation and isomerization products were observed over a full conversion regime, even after prolonged reaction times. These catalytic properties were remarkably superior in comparison to standard catalysts. The promotion of Ag on the moderation of the reactivity of the Pd phase, in combination with the creation of interfacial sites with the CeO2 moiety in the same nanostructure, is pointed as the responsible of such a remarkable catalytic performance.
RESUMEN
A facile and straightforward methodology for the preparation of monometallic (copper and palladium) and bimetallic nanocatalysts (NiCu and PdCu) stabilized by a N-heterocyclic carbene ligand is reported. Both colloidal and supported nanoparticles (NPs) on carbon nanotubes (CNTs) were prepared in a one-pot synthesis with outstanding control on their size, morphology and composition. These catalysts were evaluated in the selective hydrogenation of alkynes and alkynols. PdCu/CNTs revealed an efficient catalytic system providing high selectivity in the hydrogenation of terminal and internal alkynes. Moreover, this catalyst was tested in the semi-hydrogenation of acetylene in industrially relevant acetylene/ethylene-rich model gas feeds and showed excellent stability even after 40â h of reaction.
RESUMEN
A range of iridium complexes, Ir(η3-C3H5)(CO)(PR2R')2 (1a-1e) [where 1a, PR2R' = PPh3, 1b P(p-tol)3, 1c PMePh2, 1d PMe2Ph and 1e PMe3] were synthesized and their reactivity as stoichiometric hydroformylation precursors studied. Para-hydrogen assisted NMR spectroscopy detected the following intermediates: Ir(H)2(η3-C3H5)(CO)(PR2R') (2a-e), Ir(H)2(η1-C3H5)(CO)(PR2R')2 (4d-e), Ir(H)2(η1-C3H5)(CO)2(PR2R') (10a-e), Ir(H)2(CO-C3H5)(CO)2(PR2R') (11a-c), Ir(H)2(CO-C3H7)(CO)2(PR2R') (12a-c) and Ir(H)2(CO-C3H5)(CO)(PR2R')2 (13d-e). Some of these species exist as two geometric isomers according to their multinuclear NMR characteristics. The NMR studies suggest a role for the following 16 electron species in these reactions: Ir(η3-C3H5)(CO)(PR2R'), Ir(η1-C3H5)(CO)(PR2R')2, Ir(η1-C3H5)(CO)2(PR2R'), Ir(CO-C3H5)(CO)2(PR2R'), Ir(CO-C3H7)(CO)2(PR2R') and Ir(CO-C3H5)(CO)(PR2R')2. Their role is linked to several 18 electron species in order to confirm the route by which hydroformylation and hydrogenation proceeds.
RESUMEN
In the last decade, the semi-hydrogenation of alkynes has experienced significant advances in terms of fine control of alkene selectivity and prevention of the over-hydrogenation reaction. Such advances have been possible to a large extent through the progress in colloidal methods for the preparation of metallic nanoparticles. The present review describes the contributions in the field of the selective hydrogenation of alkynes involving the utilization of colloidal methodologies. These approaches permit the fine modulation of several parameters affecting the catalytic performance of the active phase such as the particle size, the bulk and the surface structure and composition. For the transformation of liquid substrates, the nature of the stabilizers, the reducing agents and the metal precursors employed for the synthesis of the catalysts can be tuned to enhance the alkene selectivity. In contrast, in catalytic transformations of gaseous substrates, the presence of adsorbed species at the metal surface usually gives detrimental results while the interplay between the support and the active phase appears to be a more convincing alternative for catalyst tuning.
RESUMEN
Well defined Ni nanoparticles (NiNPs) stabilized with N-heterocyclic carbenes (NHCs) have been synthesized through a new methodology involving the decarboxylation of a zwitterionic CO2 adduct. Their catalytic performance was tested in the partial hydrogenation of alkynes into (Z)-alkenes under very mild reaction conditions (50 °C and 5 bar H2 pressure), providing excellent activities and selectivities.
RESUMEN
A series of small and well defined cobalt nanoparticles were synthesized by the chemical reduction of cobalt salts in water using NaBH4 as a reducing agent and using various polymeric stabilizers. The obtained nanocatalysts of similar mean diameters (ca. 2.6 nm) were fully characterized and tested in the aqueous phase Fischer-Tropsch Synthesis (AFTS). Interestingly, the nature and structure of the stabilizers used during the synthesis of the CoNPs affected the reduction degree of cobalt and the B-doping of these NPs and consequently, influenced the performance of these nanocatalysts in AFTS.
RESUMEN
Molecular ruthenium-based water oxidation catalyst precursors of general formula [Ru(tda)(Li )2 ] (tda2- is [2,2':6',2''-terpyridine]-6,6''-dicarboxylato; L1 =4-(pyren-1-yl)-N-(pyridin-4-ylmethyl)butanamide, 1 b; L2 =4-(pyren-1-yl)pyridine), 1 c), have been prepared and thoroughly characterized. Both complexes contain a pyrene group allowing ready and efficiently anchoring via π interactions on multi-walled carbon nanotubes (MWCNT). These hybrid solid state materials are exceptionally stable molecular water-oxidation anodes capable of carrying out more than a million turnover numbers (TNs) at pHâ 7 with an Eapp =1.45â V vs. NHE without any sign of degradation. XAS spectroscopy analysis before, during, and after catalysis together with electrochemical techniques allow their unprecedented oxidative ruggedness to be monitored and verified.
RESUMEN
Phenyl rings in phenyl- or phenyl-alkylphosphines are selectively deuterated at the ortho position using Ru/PVP nanoparticles, while are fully reduced in the case of arylphosphine oxide derivatives and do not react in the case of arylphosphite. This different behavior provides information about the coordination mode of each ligand.
RESUMEN
The mechanism of the experimentally reported phosphine-free palladium-catalysed carbonylation of aryl iodides with amines in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as base was investigated at the DFT level. Paths were identified for both di- and monocarbonylation, and the calculated selectivity for three different substrates was in agreement with experiment. In dicarbonylation yielding α-ketoamides, formation of the second carbon-carbon bond occurs through reductive elimination in the Pd acyl amide intermediate after DBU-assisted nucleophilic attack of an amine at a terminal CO ligand. This path yields the major product with iodobenzene and the almost exclusive product with p-methoxyiodobenzene. Two different possible pathways yield the monocarbonylated amide product. In one of them, which affords the minor product for iodobenzene, base-assisted nucleophilic attack of the amine takes place on a Pd-bound acyl ligand. For substrates with electron-withdrawing substituents, such as p-cyanoiodobenzene, aryl migration to the CO ligand is disfavoured, and this allows base-assisted amine attack at a terminal CO ligand early in the catalytic cycle. From the resulting Pd amide aryl complex, the subsequent reductive elimination occurs easily, and monocarbonylation becomes favoured.
RESUMEN
Rhodium is currently the metal of choice to achieve high enantioselectivities in the hydroformylation of a relatively wide variety of alkene substrates. The elucidation of the different steps of the catalytic cycle and the characterization of the resting state, together with the discovery of several types of ligands that are able to provide high enantioselectivities, have made the rhodium-catalyzed hydroformylation a synthetically useful tool. For years, ligands containing phosphite moieties such as diphosphites and phosphine-phosphites were considered the most successful ligands to achieve high enantioselectivities for classical substrates such as styrene and vinyl acetate. In fact, the phosphite-phosphine BINAPHOS (43) and its derivatives are still today the most successful ligands in terms of selectivity and scope. For more substituted substrates, general trends can be extracted. However, recent studies showed that these general trends can be sometimes reversed by the use of the appropriate catalyst and choice of reaction conditions, clearly showing that these trends are only indicative and that there are still many challenges to be tackled in this area.
RESUMEN
Palladium complexes bearing monodentate and bidentate phosphine ligands (1-7) were synthesised and used as catalyst precursors in the methoxycarbonylation of norbornene. The catalytic systems bearing ligands 1, 3 and 4 afforded excellent conversions (>99%) and selectivity of the ester (>99%). NMR investigations showed that using complex 1a as the precursor resulted in the protonated phosphine, 1-H(+), being formed under catalytic conditions and thus the addition of acid is not required for the activation of this system since the reaction involving the precursor with methanol under CO pressure produces 2 equivalents of HCl and leads to the formation of the active species. The protonation of ligand 4 under methoxycarbonylation conditions was also observed and the diprotonated diphosphine was isolated and characterised. This compound was tested as a ligand and acid source in a catalysis and provided excellent conversion and high selectivity to the ester.
Asunto(s)
Monóxido de Carbono/química , Espectroscopía de Resonancia Magnética/métodos , Norbornanos/química , Paladio/química , Presión , Temperatura , Catálisis , Especificidad por SustratoRESUMEN
The reactivity of [Rh(CO)(2){(R,R)-Ph-BPE}]BF(4) (2) toward amine, CO and/or H(2) was examined by high-pressure NMR and IR spectroscopy. The two cationic pentacoordinated species [Rh(CO)(3) {(R,R)-Ph-BPE}]BF(4) (4) and [Rh(CO)(2)(NHC(5)H(10)){(R,R)-Ph-BPE}]BF(4) (8) were identified. The transformation of 2 into the neutral complex [RhH(CO)(2){(R,R)-Ph-BPE}] (3) under hydroaminomethylation conditions (CO/H(2), amine) was investigated. The full mechanisms related to the formation of 3, 4 and 8 starting from 2 are supported by DFT calculations. In particular, the pathway from 2 to 3 revealed the deprotonation by the amine of the dihydride species [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}]BF(4) (6), resulting from the oxidative addition of H(2) on 2.
RESUMEN
Reaction of [Rh(CO)(2){(R,R)-Ph-BPE}][BF(4)] 1 under 7 bar H(2) provides the dihydride [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 3, which reacts with the neutral hydride [Rh(H)(CO){(R,R)-Ph-BPE}] 2 arising from 3 in THF. The resulting complex is the dimeric monocationic Rh((I))-Rh((III)) complex [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 4.
RESUMEN
The first phosphine-free Pd-catalysed double carbonylation of aryl iodides is reported as a general and practical method, giving excellent conversions and selectivities for a wide range of aryl iodides and amine nucleophiles under atmospheric CO pressure.
Asunto(s)
Monóxido de Carbono/química , Yoduros/química , Paladio/química , Urea/análogos & derivados , Catálisis , Urea/químicaRESUMEN
The catalytic formation of C-C bonds is one of the most useful transformations in organic synthesis. Over the last decade, the use of transition metal nanoparticles (NPs) in catalysis has attracted much interest and their use in C-C bond formation reactions constitutes one of their most important applications, including the Suzuki, Heck, and Sonogashira reactions. This tutorial review highlights recent work in this active area, considering the stabilising agents used to prepare the NPs, the catalytic results and the recycling possibilities.
RESUMEN
Chiral carbohydrate-based diphosphites were used for Pd-catalysed asymmetric allylic substitution (alkylation, amination, phosphination) in neat ionic liquids (ILs). Pyrrolidinium-based IL led to the best activities, allowing an efficient catalyst immobilization. In the allylic amination (TOF > 3100 h(-1)), the catalyst could be recycled nine times preserving both activity and enantioselectivity.