cGMP dynamics that underlies thermosensation in temperature-sensing neuron regulates thermotaxis behavior in C. elegans.

Living organisms including bacteria, plants and animals sense ambient temperature so that they can avoid noxious temperature or adapt to new environmental temperature. A nematode C. elegans can sense innocuous temperature, and navigate themselves towards memorize past cultivation temperature (Tc) of their preference. For this thermotaxis, AFD thermosensory neuron is pivotal, which stereotypically responds to warming by increasing intracellular Ca2+ level in a manner dependent on the remembered past Tc. We aimed to reveal how AFD encodes the information of temperature into neural activities. cGMP synthesis in AFD is crucial for thermosensation in AFD and thermotaxis behavior. Here we characterized the dynamic change of cGMP level in AFD by imaging animals expressing a fluorescence resonance energy transfer (FRET)-based cGMP probe specifically in AFD and found that cGMP dynamically responded to both warming and cooling in a manner dependent on past Tc. Moreover, we characterized mutant animals that lack guanylyl cyclases (GCYs) or phosphodiesterases (PDEs), which synthesize and hydrolyze cGMP, respectively, and uncovered how GCYs and PDEs contribute to cGMP and Ca2+ dynamics in AFD and to thermotaxis behavior.

A multicentre tobacco cessation intervention study in the dental setting in Japan.

OBJECTIVE: The objective of this study was to assess the efficacy of a tobacco cessation intervention conducted by different dental specialists directed at a group of patients with tobacco-related oral diseases or undergoing implant treatment. METHODS: The study design was a multicentre, nonrandomized prospective cohort study to examine the effects of smoking cessation. The target patients were current smokers (aged ≥20 years) with an oral potentially malignant disorder or periodontitis and those seeking dental implants. A total of 74 patients were enrolled in the study. All dental specialists who participated in the trial completed an e-learning Japan Smoking Cessation Training Outreach Project (J-STOP) tobacco cessation education programme. Nicotine dependence was evaluated by the Fagerstrom Test for Nicotine Dependence. Cessation status was verified biochemically by measurement of salivary cotinine or exhaled carbon monoxide. Tobacco cessation intervention was implemented for 8 weeks with or without nicotine replacement therapy with follow-up for 12 months. RESULTS: A total of 61 patients agreed to the tobacco cessation intervention. The mean biochemically confirmed tobacco abstinence rate was 37.7% at month 3, 34.4% at month 6, and 32.8% at month 12. The highest rate of biochemically confirmed tobacco abstinence at month 12 was among patients receiving implant treatment (42.9%) followed by patients with oral potentially malignant disorder (37.1%), and those with periodontitis (21.1%). CONCLUSION: This interventional study demonstrates the challenges encountered and the feasibility of tobacco cessation intervention among Japanese patients attending dental specialists who had completed an e-learning course on smoking cessation. Making tobacco cessation an integral part of patient management by dental specialists requires further evaluation.

The Ball Technique for Peri-implant Soft Tissue Augmentation Using a Xenogeneic Collagen Matrix: A Technical Report.

In the maxillary anterior region, augmentation to correct a soft tissue deficiency is often required for an esthetic outcome and long-term implant therapy success. This case series of three patients presents a novel approach for soft tissue augmentation using xenogeneic collagen matrix balls in the esthetic zone around the implants. This technique avoids a secondary donor site compared to autogenous connective tissue graft. With this technique, a horizontal soft tissue volume increase (range: 3 to 5 mm) was observed postsurgically and maintained at later follow-ups. The described ball technique offers a viable method for peri-implant mucosal augmentation in the maxillary anterior region.

Effect of Sucrose Esterified Fatty Acid Moieties on the Crystal Nanostructure and Physical Properties of Water-in-oil Palm-based Fat Blends.

The effects of sucrose ester of fatty acid (SEF) on the nanostructure and the physical properties of water-in-oil (W/O)-type emulsified semisolid fats were investigated. Model emulsions including palm-based semisolid fats and fully hydrogenated rapeseed oils with 0.5% SEF or fractionated lecithin, were prepared by rapidly cooling crystallization using 0.5% monoacylglycerol as an emulsifier. The SEFs used in this study were functionalized with various fatty acids, namely, lauric, palmitic, stearic, oleic, and erucic acids. Cryogenic transmission electron microscopy (cryo-TEM) was used to observe the sizes of the solvent- extracted nanoplatelets. The solid fat content (SFC), oil migration value, and storage elastic modulus were also determined. The average crystal size, which was measured in length, of the fat blends with SEFs containing saturated fatty acids (namely, palmitic and stearic acids) was smaller than that of the SEFs containing unsaturated fatty acids (namely, oleic and erucic acids). The effects exerted by these fatty acid moieties on the spherulite size in the corresponding bulk fat blends were observed via polarized microscopy (PLM). The results suggest that nanostructure formation upon the addition of SEF ultimately influenced these aggregated microstructures. Generally, smaller platelets resulted in higher SFC in the fat phase, and a high correlation between the SFC and the G' values in W/O emulsion fats was observed (R2 = 0.884) at 30°C. In contrast, the correlation was low at 10℃. Furthermore, samples with larger nanocrystals had a higher propensity for oil migration. Thus, the addition of SEF regulated the fat crystal nanostructure during nucleation and crystal growth, which could ultimately influence the physical properties of commercially manufactured fat products such as margarine.

Autologous micrografts from the palatal mucosa for bone regeneration in calvarial defects in rats: a radiological and histological analysis.

BACKGROUND: The application of dental implants is often restricted by bone volume. In such cases, bone grafts are required, although bone graft materials have some disadvantages. Therefore, other effective approaches are needed. Our previous study showed that the autologous micrograft, a dissociated cell suspension made out of palatal connective tissue grafts, promoted bone-marrow cell proliferation and differentiation under osteogenic conditions. In this study, we aimed to evaluate the effects of dissociated soft-tissue suspensions relevant to bone regeneration in animal model. MATERIAL AND METHODS: Twelve-week-old male Wistar rats were used in the study. Defects were created in rat calvaria, and were filled with hydrogel containing either dissociated soft-tissue suspension (test) or sucrose (control). The new bone formation was evaluated at 1 and 2 weeks after surgery (n = 16) by radiological and histological analysis. RESULTS: The conducted radiological analysis showed that the new bone volume was significantly greater in the dissociated soft-tissue suspension group. This finding was further confirmed by the conducted histological analysis. CONCLUSIONS: The dissociated mucosa tissue suspension enhanced bone regeneration in vivo; thus, it is a promising potential method to aid the successful application for bone augmentation in the implant practice.

Antioxidant activity toward fish oil triacylglycerols exerted by sphingoid bases isolated from butter serum with α-tocopherol.

A mixture of sphingoid bases (SPGs) was prepared from butter serum, a by-product of anhydrous milk fat production. The mixture comprised seven types of SPGs with C16 to C19 alkyl chains. These milk SPGs inhibited the oxidation of fish oil triacylglycerol (TAG) more effectively than did a standard SPG (d18:1) with α-tocopherol. Reaction products were prepared from the combination of d18:0 or d18:1 with acrolein and propanal. Both sets of reaction products showed antioxidant activity toward fish oil TAG. Antioxidant activity of reaction products from d18:0 was stronger than that of reaction products from d18:1, suggesting that the molecule d18:0 may be a significant focus of the difference in antioxidant activity between milk SPGs and d18:1. To use SPGs as food additives in the future, an appropriate source of SPGs will be needed, and butter serum appears to have promise as a source of functional SPGs with strong antioxidant activity.

Effects of implant thread design on primary stability-a comparison between single- and double-threaded implants in an artificial bone model.

BACKGROUND: Primary implant stability is essential for osseointegration. To increase stability without changing the implant size, the thread length must be extended by reducing pitch, using a double-threaded implant, or reducing pitch/lead and lead angle to half that of a single-threaded implant. MATERIALS AND METHODS: We tested the stabilities of these configurations using artificial bone. A 1.2-mm pitch, single-threaded implant (12S) was the control. We tested a 0.6-mm pitch/1.2-mm-lead double-threaded implant (06D) and a 0.6-mm pitch/lead single-threaded implant (06S). We compared stabilities by measuring insertion torque, removal torque, and the implant stability quotient (ISQ). Damage to bone tissue caused by the implants was evaluated using microscopy and morphometric analysis. RESULTS: We show that 06D and 06S significantly improved stability compared with the 12S reference. The stability of 06S was significantly greater compared with that of 06D, except for ISQ. The three implants were associated with bone tissue damage characterized by debris and voids surrounding the implant/bone interface. The 06D caused the most tissue damage, followed by 06S and then 12S. CONCLUSION: These findings indicate that primary stability was significantly improved by changing the implant size, extending the thread length with reduced pitch/lead, and reducing the lead angle to half that of a single-threaded implant compared with a double-threaded implant.

Association of DHA Concentration in Human Breast Milk with Maternal Diet and Use of Supplements: A Cross-Sectional Analysis of Data from the Japanese Human Milk Study Cohort.

BACKGROUND: DHA (22:6n-3) is essential for neurodevelopment in children, and its concentration in human breast milk is historically high in Japan. Dietary patterns in Japan might affect the fatty acid (FA) composition among lactating mothers. OBJECTIVES: This study aimed to characterize the composition of milk FAs and to identify any dietary and sociodemographic factors associated with the variability of DHA concentration in breast milk in the Japanese population. METHODS: This cross-sectional study was performed as part of the Japanese Human Milk Study. Milk FAs were analyzed by GC at 1-6 mo postpartum, and maternal diet was estimated using an FFQ, including 11 types and cooking methods of seafoods, and the use of DHA supplements. The association of milk DHA with maternal diet and sociodemographic factors was investigated. RESULTS: Milk FA concentrations were measured in 78 mothers, including 24 who routinely used DHA supplements. The DHA concentration in milk (overall median: 0.62%; IQR: 0.47%-0.78%) was higher in women who took DHA supplements than in women who had never used DHA supplements (0.74%compared with 0.55%; P = 0.011). A linear regression model showed the association of milk DHA concentration with maternal dietary intake of grilled fish (ß ± SE: 0.006 ± 0.003; standardized ß: 0.234; r 2 = 0.232, P = 0.036) after adjustment for DHA supplementation status, maternal and infant age, maternal BMI, and infant birth weight. Other FA concentrations were consistent, whereas caproic acid (6:0), undecylic acid (11:0), pentadecylic acid (15:0), palmitoleic acid (16:1n-7), and vaccenic acid (18:1n-7) varied by DHA supplementation status. CONCLUSIONS: The DHA concentration in human milk may be influenced by maternal grilled fish consumption and frequent DHA supplementation in lactating Japanese women. Milk DHA concentrations may reflect a dietary habit in Japanese mothers.This trial was registered at www.umin.ac.jp/ctr as UMIN000015494.

Metabolomics analyses of the combined effects of lactic acid bacteria and Penicillium camemberti on the generation of volatile compounds in model mold-surface-ripened cheeses.

The flavor of white mold cheese is attributed to the formation of aroma compounds associated with complex effects of bacteria and fungi, resulting in difficulties in flavor design for new cheeses. This study aimed to identify the microbial basis of flavor by identifying the combined effects of LD type lactic acid bacteria (LAB) starters and Penicillium camemberti on the generation of metabolites during the ripening process. Metabolomics analyses were performed on three model cheeses: normal cheese, no-mold cheese with only LAB, and no-LAB cheese with only white mold. Aroma compounds and their potential precursors were analyzed using headspace solid-phase microextraction-gas chromatography/mass spectrometry (GC/MS) and solvent extraction-GC/MS, respectively. Measurements during ripening and multivariate analyses on the data revealed the relationship between the microorganisms and metabolic activities, which were classified into four groups: metabolites generated by LAB and degraded by P. camemberti; metabolites generated by P. camemberti and degraded or inhibited by LAB; metabolites generated by P. camemberti and enhanced by LAB; and metabolites exhibiting no interaction between P. camemberti and LAB. The characteristic compounds in LAB and white mold cheeses were mainly products of sugar and protein metabolism, respectively. The involvement of fatty acids, methyl ketones, and secondary alcohol metabolic pathways in the late-ripening stage was confirmed, and the profiles of volatile metabolites contributing to the characteristic aroma of the white mold cheese in the fermentation process were also confirmed.

Osteoconductive potential of a hydroxyapatite fiber material with magnesium: In vitro and in vivo studies.

Despite the benefits of hydroxyapatite fiber (HAf) as a synthetic bone substitute, materials capable of faster bone regeneration would be more preferable. In this study, effects of HAf with magnesium (Mg-HAf) on bone regeneration were evaluated. In vitro, levels of osteogenic genes were significantly higher in bone marrow cells cultured with Mg-HAf than in those cultured with HAf alone. Moreover, effects of HAf only (control) and 5.7 mol% Mg-HAf on the cranial bones of Japanese white rabbits were evaluated. MicroCT imaging and histology indicated significant differences between the control and Mg-HAf groups. Significantly higher new bone volumes and percentages were observed in the Mg-HAf group than in controls at 4 and 8 weeks (p<0.05); the newly formed bone was more mature in the Mg-HAf group than in controls. These results indicated that Mg-HAf can enhance osteogenic differentiationrelated gene expression and promote rapid bone formation and maturation.

The Effect of Dissociated Soft Tissue on Osteogenesis: A Preliminary In Vitro Study.

PURPOSE: The purpose of this in vitro study was to examine the effect of dissociated soft tissue on bone marrow cell proliferation and differentiation under osteogenic conditions. MATERIALS AND METHODS: Rat bone marrow cells were cultured to assess the stimulation of cell proliferation and differentiation. Harvested palatal mucosa was dissociated using a device (Rigenera; Human Brain Wave) and the dissociated soft tissue was cultured with rat bone marrow cells. Cell proliferation, differentiation, and mineralized nodule formation were assessed after 2 or 5 days of culturing. Bone marrow cell proliferation was assessed by quantifying the absorbance of a water-soluble tetrazolium salt using a cell proliferation assay kit. Bone marrow cell differentiation was assessed by alkaline phosphatase staining and real-time polymerase chain reaction. Mineralized nodule formation was assessed by Alizarin red staining. RESULTS: At day 2, cell proliferation, osteoblast specific gene expression, and mineralized nodule formation were significantly higher in the experimental group than in the control group. Alkaline phosphatase staining was also higher in the experimental group on day 2. Mineralized nodule formation area and osteoblast specific gene expression were also statistically higher in the experimental group on day 5. CONCLUSION: This study demonstrates that dissociated soft tissue elevates bone marrow cell proliferation and differentiation under osteogenic conditions.

Nanostructured Fat Crystal and Solid Fat Content Effects on the Physical Properties of Water-in-Oil Semisolid Fat Blends.

The effect of nanostructured fat crystals on oil migration properties in water-in-oil-type emulsified semisolid fats was investigated. Model emulsions containing 4 different semisolid fats (palm oil, partially hydrogenated palm oil, partially hydrogenated soybean oil, and milk fat) and 1 bulk fat blend were prepared with rapidly cooling crystallization. The length of the nanoplatelets was observed by cryo transmission electron microscopy, the crystal thickness was calculated by small-angle X-ray diffraction, and the solid fat content (SFC) was determined. Although the interfacial surface of the dispersed water droplets did not influence nanoplatelet size, oil migration in the emulsified samples was lower than in the bulk fat. The crystal sizes in samples with partially hydrogenated soybean oil involving elaidic acid were larger, in contrast to that of milk fat, involving low to medium chain length fatty acids, which had smaller crystal sizes and showed wide length distribution. The length of the platelets and SFC were related to the oil migration value. These results suggest that the oil binding ability of fat products, such as margarine, is influenced by the nanostructure, which is related to fatty acid composition and interfacial structure.

Mass spectrometric imaging of localization of fat molecules in water-in-oil emulsions containing semi-solid fat.

Firstly, we report the localization analysis of the lipid components of a water-in-oil (W/O) semi-solid emulsion by mass spectrometry imaging (MSI). Uniform emulsion droplets were prepared using microchannel emulsification devices with lecithin, stearic acid-binding monoglyceride (St-MAG), and polyglycerol polyricinoleate (PGPR) as emulsifiers. The mass image gives us the localization of phosphatidylcholine (PC) in lecithin, St-MAG, tripalmitin (PPP), medium-chain triglyceride (MCT), and high-melting-point triglyceride tristearin (C18-TAG). PC, St-MAG, and PPP were localized at the interface with the dispersed water droplets. PC and PPP took the same localized position, suggesting an interaction between PC and PPP at the interface. Conversely, PC existed in other regions with St-MAG. MSI revealed multiple target molecules in fat products in a single measurement, and it is expected to reveal fat crystallization at the emulsion interfaces, which will clarify the mechanisms related to the physical properties of high-fat products such as fat spread and butter.

Evaluation of the Alteration of Occlusal Distribution in Unilateral Free-End and Intermediate Missing Cases.

The present study aimed to evaluate the effect of implant prostheses on the occlusal force and area as well as the distribution of occlusal loading in unilateral free-end and intermediate missing cases. Fourteen healthy subjects (7 free-end missing cases in the first and second molars and 7 intermediate missing cases in the first molar region) were included. Six months after the implant prosthesis was placed, an occlusal evaluation was performed with or without the implant superstructure by using Dental Prescale film and an occluder device. In free-end missing cases, the total occlusal force and area, implant-side occlusal force and area, and implant-side occlusal force and area of the residual natural teeth were significantly affected by the implant prostheses. In intermediate missing cases, the implant-side occlusal force of the residual natural teeth was significantly affected by the implant prostheses. In free-end missing cases, the proportions of implant-side occlusal force, non-implant-side occlusal force, and implant-side occlusal force of the residual natural teeth relative to the total occlusal force were significantly affected by the implant prostheses. In the intermediate missing cases, the proportion of the implant-side occlusal force of the residual natural teeth relative to the total occlusal force was significantly affected by the implant prostheses. The proportion of the occlusal area was also significantly affected. In free-end missing cases, implant prostheses significantly increased the occlusal force and area, which resulted in the proper occlusal distribution. In intermediate missing cases, an implant prosthesis may only improve the same-side occlusal loading of the natural teeth.

A randomized, 12-month controlled trial to evaluate non-inferiority of early compared to conventional loading of modSLA implants in single tooth gaps.

BACKGROUND: The aim of the study was to evaluate whether early loading of implants with a chemically modified sandblasted, large-grit, acid-etched (SLA) (SLActive®) surface was non-inferior to conventional loading in terms of change in crestal bone level. METHODS: This was a randomized, controlled, multicenter study. Patients requiring single-tooth rehabilitation in the posterior maxilla or mandible received implants and were randomized to receive a provisional restoration in occlusal load after 25 ± 3 days (early loading) or after 13 ± 1 weeks (conventional loading). The primary endpoint was change in crestal bone level between implant placement (baseline) and 6 months. Secondary endpoints included change in crestal bone level between baseline and 12 months, implant survival and success rates, and patient satisfaction. RESULTS: Of the 84 patients enrolled, 78 received implants and were randomized onto the early loading (41 patients) and conventional loading (37 patients) groups. The mean change in crestal bone level between baseline and 6 months was 0.56 ± 0.58 and 0.51 ± 0.62 mm for early and conventional loading, respectively; at 12 months, the mean change was 0.76 ± 0.60 and 0.73 ± 0.77 mm, respectively. Implant survival and success at 12 months were 100 % for both groups. Patient satisfaction was similar between the groups, except that more patients in the early loading group were satisfied or highly satisfied with the time taken for fitting. CONCLUSION: The study demonstrated that early implant loading was non-inferior to conventional implant loading in terms of crestal bone level change in a Japanese patient population in short follow-up period and single tooth gaps in molar regions.

The effectiveness of optical coherence tomography for evaluating peri-implant tissue: A pilot study.

PURPOSE: Optical coherence tomography (OCT) has been investigated as a novel diagnostic imaging tool. The utilisation of this equipment has been evaluated through several studies in the field of dentistry. The aim of this preliminary study was to determine through basic experiments the effectiveness of OCT in implant dentistry. MATERIALS AND METHODS: To assess detection ability, we captured OCT images of implants in each of the following situations: (1) implants covered with mucosae of various thicknesses that were harvested from the mandibles of pigs; (2) implants installed in the mandibles of pigs; and (3) implants with abutments and crowns fixed with temporary cement. The OCT images were captured before cementation, after cementation, and after removing the excess submucosal cement. RESULTS: If the thickness of the mucosa covering the implant body was less than 1 mm, the images of the implants were clearly detected by OCT. In the implants were installed in pigs' mandibles, it was difficult to capture clear images of the implant and alveolar bone in most of the samples. Remnants of excess cement around the implants were visible in most samples that had a mucosa thickness of less than 3 mm. CONCLUSION: Currently, OCT imaging of implants is limited. Cement remnants at the submucosal area can be detected in some cases, which can be helpful in preventing peri-implant diseases. Still, though there are some restrictions to its application, OCT could have potential as an effective diagnostic instrument in the field of implant dentistry as well.

Inhibitory Effect of Dihydrosphingosine with α-Tocopherol on Volatile Formation during the Autoxidation of Polyunsaturated Triacylglycerols.

The effect of dihydrosphingosine (d18:0) on triacylglycerol (TAG) oxidation was examined with and without α-tocopherol. Three types of TAG from fish, linseed, and soybean oil were oxidized at 50°C to determine the effect of dihydrosphingosine (d18:0) with or without α-tocopherol on triacylglycerol (TAG) oxidation. The analysis of oxygen consumption and total volatile formation demonstrated a small effect of d18:0 on TAG oxidation in the absence of α-tocopherol. On the other hand, the combination of d18:0 with α-tocopherol showed strong antioxidant activity and completely inhibited volatile formation within 1400 h for soybean oil TAG, 650 h for linseed oil TAG, and 380 h for fish oil TAG.

Effect of strontium ions on calcification of preosteoblasts cultured on porous calcium- and phosphate-containing titanium oxide layers formed by micro-arc oxidation.

Strontium (Sr) ions were added to calcium- and phosphate-containing porous titanium oxide layers formed by micro-arc oxidation (MAO) of titanium (Ti) substrates to improve their osseointegration. An MC3T3-E1 preosteoblast was used to evaluate the effect of the incorporated Sr species on cell calcification. Similar surface microporous morphologies of the oxide layers were observed for all specimens produced by MAO, while the contents of the incorporated Sr ions increased with increasing Sr concentrations in MAO electrolytes. The calcium- and phosphate-containing porous layers promoted the cell alkaline phosphatase (ALP) activity, while cell calcification was promoted by the Sr addition. In particular, the ALP activity significantly increased after 10 days of culture, and larger areas of calcified deposits were observed for the specimens treated with MAO electrolytes containing 0.15 mol L(-1) of Sr species. The effect of Sr addition on the calcification of the MAO-treated Ti oxide layers was established in this study.

The dietary effect of milk sphingomyelin on the lipid metabolism of obese/diabetic KK-A(y) mice and wild-type C57BL/6J mice.

Purified milk sphingomyelin (SM) was obtained from lipid concentrated butter serum (LC-BS) by successive separations involving solvent fractionation, selective saponification, and silicic acid column chromatography. The SM obtained was given to obese/diabetic KK-A(y) mice and wild-type C57BL/6J mice. SM supplementation significantly increased fecal lipids paralleled with a decrease in non-HDL cholesterol levels in the serum and neutral lipids and in cholesterol levels in the livers of KK-A(y) mice. The reduction of liver lipid levels also resulted in a decrease in the total fatty acid content of the KK-A(y) mice livers, while n-3 fatty acids derived from the conversion of α-linolenic acid (18:3n-3) increased due to SM supplementation. In contrast to the KK-A(y) mice, little change in the serum and liver lipids was observed in wild-type C57BL/6J mice. The present study suggests that SM may be effective only in subjects with metabolic disorders.

Development and application of a direct method to observe the implant/bone interface using simulated bone.

BACKGROUND: Primary stability after implant placement is essential for osseointegration. It is important to understand the bone/implant interface for analyzing the influence of implant design on primary stability. In this study rigid polyurethane foam is used as artificial bone to evaluate the bone-implant interface and to identify where the torque is being generated during placement. METHODS: Five implant systems-Straumann-Standard (ST), Straumann-Bone Level (BL), Straumann-Tapered Effect (TE), Nobel Biocare-Brånemark MKIII (MK3), and Nobel Biocare-Brånemark MKIV (MK4)-were used for this experiment. Artificial bone blocks were prepared and the implant was installed. After placement, a metal jig and one side artificial bone block were removed and then the implant embedded in the artificial bone was exposed for observing the bone-implant interface. A digital micro-analyzer was used for observing the contact interface. RESULTS: The insertion torque values were 39.35, 23.78, 12.53, 26.35, and 17.79 N cm for MK4, BL, ST, TE, and MK3, respectively. In ST, MK3, TE, MK4, and BL the white layer areas were 61 × 103 µm(2), 37 × 103 µm(2), 103 × 103 µm(2) in the tapered portion and 84 × 03 µm(2) in the parallel portion, 134 × 103 µm(2), and 98 × 103 µm(2) in the tapered portion and 87 × 103 µm(2) in the parallel portion, respectively. CONCLUSIONS: The direct observation method of the implant/artificial bone interface is a simple and useful method that enables the identification of the area where implant retention occurs. A white layer at the site of stress concentration during implant placement was identified and the magnitude of the stress was quantitatively estimated. The site where the highest torque occurred was the area from the thread crest to the thread root and the under and lateral aspect of the platform. The artificial bone debris created by the self-tapping blade accumulated in both the cutting chamber and in the space between the threads and artificial bone.