Evaluation of Antibacterial Activity of Bismuth Ferrites Nanoparticles in the inhibition of E. coli and S. aureus bacteria.

In this work, bismuth ferrites (BFO) nanoparticles were produced in the form of using sol-gel technique, followed by annealing in a tube furnace in temperatures from 400 °C to 650 ºC. X-ray diffraction (XRD) results showed the formation of small sizes nanoparticles (NPs) with high purity. Structural analysis displayed that annealing at 600 ºC could make BFO NPs be fitted to rhombohedral space group (R3c), with small quantity of spurious phases. The sizes of the BFO nanoparticles determined by transmission electron microscopy (HRTEM) are between 50 to 100 nm. To evaluate the efficiency of BFO in antimicrobial susceptibility tests, the nanoparticles were dispersed through nanoemulsion and tested agar diffusion method and dilution in a 96 well plate using a Gram positive strains (Staphylococcus aureus) and Gram negative strain (Escherichia coli). The antibacterial activity of the BFO NPs was partially tested at concentrations of 2 mg/mL with MIC greater than 60 µg/mL for both bacteria.

Multi-pollutant biosorption of organic and inorganic pollutants by brown algae waste from alginate production: batch and fixed-bed investigation.

The reuse of biomass waste has been gaining attention in adsorption processes to remove pollutants of emerging concern from water and wastewater. In this work, the potential of alginate-extracted macro-algae waste to uptake synthetic dyes and metal cations was evaluated in comparison with raw algae. In affinity assays, both materials were able to remove metal cations and cationic dyes up to maximum rates, and no significant removal was observed for an anionic dye in an acidic medium. Competition was observed in multi-component systems of metal cations and dyes. For binary samples containing organic and inorganic contaminants, kinetic modeling evidenced the distinct nature of both types of adsorbates. Pb(II) biosorption was best described as a first-order process, while second-order and Elovich models better fitted methyl blue (MB) uptake data. For equimolar binary samples, the Sips isothermal model fitted the experimental data more satisfactorily at room temperature. Isotherms for 20, 30, 40, and 60 °C exhibited favorable adsorption profiles with spontaneous ΔG values for both raw macro-algae and waste from alginate extraction. Maximum adsorption capacities were competitive with previous reports in the literature for a wide range of biomaterials, pointing to the slightly higher efficiency with algae waste in batch experiments. In elution tests, HNO3 (0.5 M) showed the best recovery rates of metal cations. Continuous biosorption operation revealed the performance of the brown algae waste was considerably more efficient than raw algae with breakthrough biosorption capacities up to 3.96 and 0.97 mmol.g-1 for the removal of Pb(II) and MB, respectively. A total of 3.0 g of algae and algae waste were able to deliver 1.20 and 1.62 L of contaminant-free water, respectively. XPS analyses corroborate previous assays that pointed to the prevalence of physisorption with evidence of complexation, ionic exchange, and hydrogen displacement mechanisms.

Selecting 'convenient observers' to probe the atomic structure of CVD graphene on Ir(111) via photoelectron diffraction.

CVD graphene grown on metallic substrates presents, in several cases, a long-range periodic structure due to a lattice mismatch between the graphene and the substrate. For instance, graphene grown on Ir(111), displays a corrugated supercell with distinct adsorption sites due to a variation of its local electronic structure. This type of surface reconstruction represents a challenging problem for a detailed atomic surface structure determination for experimental and theoretical techniques. In this work, we revisited the surface structure determination of graphene on Ir(111) by using the unique advantage of surface and chemical selectivity of synchrotron-based photoelectron diffraction. We take advantage of the Ir 4f photoemission surface state and use its diffraction signal as a probe to investigate the atomic arrangement of the graphene topping layer. We determine the average height and the overall corrugation of the graphene layer, which are respectively equal to 3.40 ± 0.11 Å and 0.45 ± 0.03 Å. Furthermore, we explore the graphene topography in the vicinity of its high-symmetry adsorption sites and show that the experimental data can be described by three reduced systems simplifying the moiré supercell multiple scattering analysis.

Outlining cell interaction and inflammatory cytokines on UV-photofunctionalized mixed-phase TiO2 thin film.

Photofunctionalization mediated by ultraviolet (UV) light seems to be a promising approach to improve the physico-chemical characteristics and the biological response of titanium (Ti) dental implants. Seeing that photofunctionalization is able to remove carbon from the surface, besides to promote reactions on the titanium dioxide (TiO2) layer, coating the Ti with a stable TiO2 film could potentialize the UV effect. Thus, here we determined the impact of UV-photofunctionalized mixed-phase (anatase and rutile) TiO2 films on the physico-chemical properties of Ti substrate and cell biology. Mixed-phase TiO2 films were grown by radiofrequency magnetron sputtering on commercially pure titanium (cpTi) discs, and samples were divided as follow: cpTi (negative control), TiO2 (positive control), cpTi UV, TiO2 UV (experimental). Photofunctionalization was performed using UVA (360 nm - 40 W) and UVC (250 nm - 40 W) lamps for 48 h. Surfaces were analyzed in terms of morphology, topography, chemical composition, crystalline phase, wettability and surface free energy. Pre-osteoblastic cells (MC3T3E1) were used to assess cell morphology and adhesion, metabolism, mineralization potential and cytokine secretion (IFN-γ, TNF-α, IL-4, IL-6 and IL-17). TiO2-coated surfaces exhibited granular surface morphology and greater roughness. Photofunctionalization increased wettability (p < 0.05) and surface free energy (p < 0.001) on both surface conditions. TiO2-treated groups featured normal cell morphology and spreading, and greater cellular metabolic activity at 2 and 4 days (p < 0.05), whereas UV-photofunctionalized surfaces enhanced cell metabolism, cell adhered area, and calcium deposition (day 14) (p < 0.05). In general, assessed proteins were found slightly affected by either UV or TiO2 treatments. Altogether, our findings suggest that UV-photofunctionalized TiO2 surface has the potential to improve pre-osteoblastic cell differentiation and the ability of cells to form mineral nodules by modifying Ti physico-chemical properties towards a more stable context. UV-modified surfaces modulate the secretion of key inflammatory markers.

Physicochemical Studies on the Surface of Polyamide 6.6 Fabrics Functionalized by DBD Plasmas Operated at Atmospheric and Sub-Atmospheric Pressures.

This work proposes the use of a dielectric barrier discharge (DBD) reactor operating at atmospheric pressure (AP) using air and sub-atmospheric pressure (SAP) using air or argon to treat polyamide 6.6 (PA6.6) fabrics. Here, plasma dosages corresponding to 37.5 kW·min·m-2 for AP and 7.5 kW·min·m-2 for SAP in air or argon were used. The hydrophilicity aging effect property of untreated and DBD-treated PA6.6 samples was evaluated from the apparent contact angle. The surface changes in physical microstructure were studied by field emission scanning electron microscopy (FE-SEM). To prove the changes in chemical functional groups in the fibers, Fourier transform infrared spectroscopy (FTIR) was used, and the change in surface bonds was evaluated by energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). In addition, the whiteness effect was investigated by the color spectrophotometry (Datacolor) technique. The results showed that the increase in surface roughness by the SAP DBD treatment contributed to a decrease in and maintenance of the hydrophilicity of PA6.6 fabrics for longer. The SAP DBD in air treatment promoted an enhancement of the aging effect with a low plasma dosage (5-fold reduction compared with AP DBD treatment). Finally, the SAP DBD treatment using argon functionalizes the fabric surface more efficiently than DBD treatments in air.

Synthesis of bioactive glass-based coating by plasma electrolytic oxidation: Untangling a new deposition pathway toward titanium implant surfaces.

HYPOTHESIS: Although bioactive glass (BG) particle coatings were previously developed by different methods, poor particle adhesion to surfaces and reduced biological effects because of glass crystallization have limited their biomedical applications. To overcome this problem, we have untangled, for the first time, plasma electrolytic oxidation (PEO) as a new pathway for the synthesis of bioactive glass-based coating (PEO-BG) on titanium (Ti) materials. EXPERIMENTS: Electrolyte solution with bioactive elements (Na2SiO3-5H2O, C4H6O4Ca, NaNO3, and C3H7Na2O6P) was used as a precursor source to obtain a 45S5 bioglass-like composition on a Ti surface by PEO. Subsequently, the PEO-BG coating was investigated with respect to its surface, mechanical, tribological, electrochemical, microbiological, and biological properties, compared with those of machined and sandblasted/acid-etched control surfaces. FINDINGS: PEO treatment produced a coating with complex surface topography, Ti crystalline phases, superhydrophilic status, chemical composition, and oxide layer similar to that of 45S5-BG (~45.0Si, 24.5 Ca, 24.5Na, 6.0P w/v%). PEO-BG enhanced Ti mechanical and tribological properties with higher corrosion resistance. Furthermore, PEO-BG had a positive influence in polymicrobial biofilms, by reducing pathogenic bacterial associated with biofilm-related infections. PEO-BG also showed higher adsorption of blood plasma proteins without cytotoxic effects on human cells, and thus may be considered a promising biocompatible approach for biomedical implants.

Probing the Site-Selective Doping in SrSnO3:Eu Oxides and Its Impact on the Crystal and Electronic Structures Using Synchrotron Radiation and DFT Simulations.

The impact of Eu3+ doping at the Sr2+ and Sn4+ sites in SrSnO3 on its structural and electronic properties was studied and correlated with the photocatalytic efficiency. The compounds were synthesized using a modified Pechini method. Refinement of the synchrotron X-ray diffraction (S-XRD) data showed that the samples had an orthorhombic Pbnm symmetry. The incorporation of Eu into the lattice led to increased short- and long-range disorder, inducing additional distortion in the SnO6. XANES measurements revealed that mixed Eu valences (Eu3+ and Eu2+) were present in Eu-doped samples, and DFT calculations confirmed the presence of these ions at Sr2+/Sr4+ sites in the SrSnO3, resulting in changes in the electronic behavior. The catalytic performance toward Remazol yellow dye photodegradation and the catalysts' surface properties were also evaluated. The catalytic efficiency followed the order of Sr(Sn0.99Eu0.01)SnO3 > (Sr0.99Eu0.01)SnO3 > SrSnO3. The order was clearly related to selected-site doping that changed the degree of the inter- and intraoctahedral distortion and the introduction of different Eu midgap states, which apparently favor charge separation upon photoexcitation during photocatalysis. The results shown here are of great importance to the functionalization of SrSnO3 and other perovskite materials by lanthanoid ions, especially Eu3+, for effective applications as photocatalysts.

Treatment of aqueous solutions of 1,4-dioxane by ozonation and catalytic ozonation with copper oxide (CuO).

In this study, treatment for the removal of 1,4-dioxane by ozone and by catalytic ozonation using CuO as the catalyst was investigated. While the removal of 1,4-dioxane was small (20%) and mineralization negligible after 6 h of ozonation treatment, the removals of 1,4-dioxane and total organic carbon increased by factors of 10.35 and 81.25, respectively, after catalytic ozonation in the presence of CuO. The mineralization during catalytic ozonation was favoured at pH 10 (94.91 min-1), although it proceeded even at pH 3 (54.41 min-1). The CuO catalyst decreased the equilibrium concentration of soluble ozone and favoured its decomposition to reactive oxidative species. Radical scavenging experiments demonstrated that superoxide radicals were the main species responsible for the degradation of 1,4-dioxane. Further scavenging experiments with phosphate confirmed the presence of Lewis active sites on the surface of CuO, which were responsible for the adsorption and decomposition of ozone. The reaction mechanism proceeded through the formation of ethylene glycol diformate, which quickly hydrolyzed to ethylene glycol and formic acid as intermediate products. The stability of CuO indicated weak copper leaching and high catalytic activity for five recycling cycles. The toxicity of the water, assessed by Vibrio fischeri bioluminescence assays, remained the same (low toxicity) after catalytic ozonation while it increased after treatment with ozonation alone.

3D Printed Graphene Electrodes Modified with Prussian Blue: Emerging Electrochemical Sensing Platform for Peroxide Detection.

3D printing technologies have been considered an important technology due to the ease manufacturing of objects, freedom of design, waste minimization, and fast prototyping. In chemistry, this technology potentializes the fabrication of conductive electrodes in large scale for sensing applications. Herein, we reported the modification of a 3D printed graphene electrode with Prussian blue. The modified electrode (3DGrE/PB) was characterized by microscopy (SEM and AFM) and spectroscopic techniques, and its electrochemical properties were compared to the traditional electrodes: glassy carbon, gold, and platinum. The 3DGrE/PB was used in the sensing of hydrogen peroxide in real-world samples of milk and mouthwash, and the results obtained according to the technique of batch-injection analysis were satisfactory for the concentration range typically found in such samples. Thus, 3DGrE/PB can be used as a new platform for sensing of molecular targets.

Electrochemical water oxidation by cobalt-Prussian blue coordination polymer and theoretical studies of the electronic structure of the active species.

The search for earth-abundant metal-based catalysts for the oxygen evolution reaction (OER) that operates under neutral conditions is a challenge in the field of sustainable energy. Many strategies have been used, and coordination polymers with structures similar to Prussian blue appear to be interesting electrocatalysts due to their efficiency, stability and tunable properties. In this paper, a novel catalyst produced from a cobalt-pentacyanidoferrate precursor is presented and applied in studies of the OER. This material showed a high surface active area and electrocatalytic activity comparable to traditional cobalt hexacyanidoferrate. According to the theoretical calculations, the improvement of these properties is an effect of the framework arrangement and it is not caused by changes of the electronic structure. Further experimental evidence is necessary to determine the active species. However, our results of spin densities obtained from DFT calculations suggest that the active species for water oxidation is the radical Fe(iii)-CN-Co(iii)-O˙.

Equilibrium study of binary mixture biosorption of Cr(III) and Zn(II) by dealginated seaweed waste: investigation of adsorption mechanisms using X-ray photoelectron spectroscopy analysis.

The alginate extraction residue (RES) from the Brazilian Sargassum filipendula was successfully employed as biosorbent in this binary equilibrium study, revealing a greater affinity and selectivity for Cr(III) than for Zn(II). Experimental results also revealed that the process is of endothermic nature and well adjusted by Langmuir-Freundlich binary model. The X-ray photoelectron spectroscopy (XPS) analysis revealed that coordination with hydroxyl groups of RES prevailed in Cr removal, followed by carboxyl-metal complexation. As far as Zn(II) is concerned, ion exchange with carboxylate groups of RES was the largest contributor. Nevertheless, scanning electron microscopy coupled with Fourier transform infrared spectroscopy indicated the participation of sulfate functions in a minor degree.

Employing Calcination as a Facile Strategy to Reduce the Cytotoxicity in CoFe2O4 and NiFe2O4 Nanoparticles.

CoFe2O4 and NiFe2O4 nanoparticles (NPs) represent promising candidates for biomedical applications. However, in these systems, the knowledge over how various physical and chemical parameters influence their cytotoxicity remains limited. In this article, we investigated the effect of different calcination temperatures over cytotoxicity of CoFe2O4 and NiFe2O4 NPs, which were synthesized by a sol-gel proteic approach, toward L929 mouse fibroblastic cells. More specifically, we evaluated and compared CoFe2O4 and NiFe2O4 NPs presenting low crystallinity (that were calcined at 400 and 250 °C, respectively) with their highly crystalline counterparts (that were calcined at 800 °C). We found that the increase in the calcination temperature led to the reduction in the concentration of surface defect sites and/or more Co or Ni atoms located at preferential crystalline sites in both cases. A reduction in the cytotoxicity toward mouse fibroblast L929 cells was observed after calcination at 800 °C. Combining with inductively coupled plasma mass spectrometry data, our results indicate that the calcination temperature can be employed as a facile strategy to reduce the cytotoxicity of CoFe2O4 and NiFe2O4, in which higher temperatures contributed to the decrease in the dissolution of Co2+ or Ni2+ from the NPs. We believe these results may shed new insights into the various parameters that influence cytotoxicity in ferrite NPs, which may pave the way for their widespread applications in biomedicine.

Amphiphilic Nucleating Agents to Enhance Calcium Phosphate Growth on Polymeric Surfaces.

Poly(ε-caprolactone) (PCL) is an aliphatic polyester widely explored in the preparation of guided bone regeneration (GBR) membranes because of its interesting mechanical properties and biodegradability. However, PCL high hydrophobicity often impairs cell adhesion and proliferation as well as calcium phosphate growth, all of which are crucial to achieving suitable bone-tissue integration. In this work, aimed at achieving less-hydrophobic surfaces, amphiphilic molecules were added at low concentrations to the polymeric dope solutions that generated the GBR membranes. During membrane formation, these molecules migrate to the solution/air interface in such a way that, upon liquid-solid phase transition, the negatively charged heads are exposed while the apolar tails are anchored to the polymer bulk. As a consequence, these molecules became nucleating agents for subsequent calcium phosphate growth using an alternating soaking process. Herein, PCL porous membranes containing different amphiphilic molecules, such as stearic acid and bis(2-ethylhexyl) phosphate, were investigated. This new, simple, and atoxic method to superficially treat polymeric membranes could be extended to a wide range of polymers and applications.

Photocatalytic oxidation of selected gas-phase VOCs using UV light, TiO2, and TiO2/Pd.

Heterogeneous photocatalytic oxidation systems using titanium dioxide (TiO2) have been extensively studied for the removal of several volatile organic compounds (VOCs). The addition of noble metals such as palladium on TiO2 may improve photocatalytic activity by increasing charge separation efficiency. In this work, palladium was impregnated on TiO2 and the efficiency of the new catalyst was tested and compared with that of pure TiO2. Pd was impregnated on TiO2 by the reduction method, using NaBH4, and was characterized by XRD, XPS, UV-Vis, and H2 chemisorption. The photocatalytic tests were performed in an annular coated-wall reactor using octane, isooctane, n-hexane, and cyclohexane at inlet concentrations varying from 100 to 120 ppmv. Compared with pure TiO2 film, the photocatalytic activity of TiO2 impregnated with 1 wt% of palladium was improved. All the aforementioned analytical techniques confirmed the presence of Pd incorporated into the structure of TiO2, and the conversion rates were studied in a broad range of residence times, yielding up to 90 % or higher rates in 40 s of residence time, thus underscoring the relevant contribution of the technology.

Biomimetic coatings enhance tribocorrosion behavior and cell responses of commercially pure titanium surfaces.

Biofunctionalized surfaces for implants are currently receiving much attention in the health care sector. Our aims were (1) to create bioactive Ti-coatings doped with Ca, P, Si, and Ag produced by microarc oxidation (MAO) to improve the surface properties of biomedical implants, (2) to investigate the TiO2 layer stability under wear and corrosion, and (3) to evaluate human mesenchymal stem cells (hMSCs) responses cultured on the modified surfaces. Tribocorrosion and cell experiments were performed following the MAO treatment. Samples were divided as a function of different Ca/P concentrations and treatment duration. Higher Ca concentration produced larger porous and harder coatings compared to the untreated group (p < 0.001), due to the presence of rutile structure. Free potentials experiments showed lower drops (-0.6 V) and higher coating lifetime during sliding for higher Ca concentration, whereas lower concentrations presented similar drops (-0.8 V) compared to an untreated group wherein the drop occurred immediately after the sliding started. MAO-treated surfaces improved the matrix formation and osteogenic gene expression levels of hMSCs. Higher Ca/P ratios and the addition of Ag nanoparticles into the oxide layer presented better surface properties, tribocorrosive behavior, and cell responses. MAO is a promising technique to enhance the biological, chemical, and mechanical properties of dental implant surfaces.

Production of a biofunctional titanium surface using plasma electrolytic oxidation and glow-discharge plasma for biomedical applications.

In this study, the authors tested the hypotheses that plasma electrolytic oxidation (PEO) and glow-discharge plasma (GDP) would improve the electrochemical, physical, chemical, and mechanical properties of commercially pure titanium (cpTi), and that blood protein adsorption on plasma-treated surfaces would increase. Machined and sandblasted surfaces were used as controls. Standard electrochemical tests were conducted in artificial saliva (pHs of 3.0, 6.5, and 9.0) and simulated body fluid. Surfaces were characterized by scanning electron microscopy, energy-dispersive spectroscopy, x-ray photoelectron spectroscopy, atomic force microscopy, x-ray diffraction, profilometry, Vickers microhardness, and surface energy. For biological assay, the adsorption of blood serum proteins (i.e., albumin, fibrinogen, and fibronectin) was tested. Higher values of polarization resistance and lower values of capacitance were noted for the PEO and GDP groups (p < 0.05). Acidic artificial saliva reduced the corrosion resistance of cpTi (p < 0.05). PEO and GDP treatments improved the surface properties by enrichment of the surface chemistry with bioactive elements and increased surface energy. PEO produced a porous oxide layer (5-µm thickness), while GDP created a very thin oxide layer (0.76-µm thickness). For the PEO group, the authors noted rutile and anatase crystalline structures that may be responsible for the corrosion barrier improvement and increased microhardness values. Plasma treatments were able to enhance the surface properties and electrochemical stability of titanium, while increasing protein adsorption levels.

Incorporation of Ca, P, and Si on bioactive coatings produced by plasma electrolytic oxidation: The role of electrolyte concentration and treatment duration.

The objectives of the present study were to produce bioactive coatings in solutions containing Ca, P, and Si by plasma electrolytic oxidation (PEO) on commercially pure titanium, to investigate the influence of different electrolytes concentration and treatment duration on the produced anodic films and to evaluate biocompatibility properties. The anodic films were characterized using scanning electron microscopy, energy-dispersive spectroscopy, atomic force microscopy, and x-ray diffraction and x-ray photoelectron spectroscopies. The surface energy and roughness were also evaluated. PEO process parameters influenced the crystalline structure formation and surface topography of the anodic films. Higher Ca content produced larger porous (volcanolike appearance) and thicker oxide layers when compared to the lower content. Treatment duration did not produce any topography difference. The treatment modified the surface chemistry, producing an enriched oxide layer with bioactive elements in the form of phosphate compounds, which may be responsible for mimicking bone surface. In addition, a rough surface with increased surface energy was generated. Optimal spreading and proliferation of human mesenchymal stem cells was achieved by PEO treatment, demonstrating excellent biocompatibility of the surface. The main finding is that the biofunctionalization with higher Ca/P on Ti-surface can improve surface features, potentially considered as a candidate for dental implants.

The atomic structure of a bare buffer layer on SiC(0001) chemically resolved.

A chemical-specific photoelectron diffraction structure determination of a carbon rich buffer layer on SiC is reported. In addition to the long-range ripple of this surface, a local buckling in the hexagonal sublattice, which breaks the local range order symmetry, was unraveled.

Simultaneous determination of epinephrine and dopamine by electrochemical reduction on the hybrid material SiO2/graphene oxide decorated with Ag nanoparticles.

This paper describes the synthesis, characterization and applications of a new hybrid material composed of mesoporous silica (SiO2) modified with graphene oxide (GO), SiO2/GO, obtained by the sol-gel process using HF as the catalyst. The hybrid material, SiO2/GO, was decorated with silver nanoparticles (AgNPs) with a size of less than 20 nanometres, prepared directly on the surface of the material using N,N-dimethylformamide (DMF) as the reducing agent. The resulting material was designated as AgNP/SiO2/GO. The Ag/SiO2/GO material was characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and high-resolution transmission electron microscopy (HR-TEM). A glassy carbon electrode modified with AgNP/SiO2/GO was used in the development of a sensitive electrochemical sensor for the simultaneous determination of epinephrine and dopamine employing electrocatalytic reduction using squarewave voltammetry. Well-defined and separate reduction peaks were observed in PBS buffer at pH 7. No significant interference was seen for primarily biological interferents such as uric acid and ascorbic acid in the detection of dopamine and epinephrine. Our study demonstrated that the resultant AgNP/SiO2/GO-modified electrode is highly sensitive for the simultaneous determination of dopamine and epinephrine, with the limits of detection being 0.26 and 0.27 µmol L(-1), respectively. The AgNP/SiO2/GO-modified electrode is highly selective and can be used to detect dopamine and epinephrine in a human urine sample.

Simultaneous electroanalytical determination of hydroquinone and catechol in the presence of resorcinol at an SiO2/C electrode spin-coated with a thin film of Nb2O5.

This paper describes the development, characterization and application of an Nb(2)O(5) film formed on the surface of a carbon ceramic material, SiO(2)/C, obtained by a sol-gel method, using the spin-coating technique. The working electrode using this material will be designated as SiCNb. Hydroquinone and catechol can be oxidized at this electrode in the presence of resorcinol, allowing their simultaneous detection. The electrochemical properties of the resulting electrode were investigated using cyclic and differential pulse voltammetry techniques. Well-defined and separated oxidation peaks were observed by differential pulse voltammetry in Tris-HCl buffer solution at pH 7 containing 1 mol L(-1) KCl in the supporting electrolyte solution. The SiCNb electrode exhibited high sensitivity in the simultaneous determination of hydroquinone and catechol in the presence of resorcinol, with the limits of detection for hydroquinone and catechol being 1.6 µmol L(-1) and 0.8 µmol L(-1), respectively. Theoretical calculations were performed to determine the ionization energies of hydroquinone, catechol and resorcinol; the results were used to explain the simultaneous determination of species by differential pulse voltammetry. The presence of resorcinol did not produce any interference in the simultaneous detection of hydroquinone and catechol on the surface of the modified electrode.